Keep A Network From Disappearing In XP?
Mar 23, 2012When I map a network drive it disappears every time I reboot my computer how I can keep it from disappearing? I am running Windows XP Professional
View 2 Replies
ADVERTISEMENT
Network Disappearing And Disconnecting Constantly
Dec 3, 2012I have had the virgin media superhub on 30mb broadband for about a month and over the last week I have been disconnecting from my network up to as much as 3 or 4 times a minute or sometimes once in five minutes and other times it just vanishes from the network list for about 30 seconds then re-appears, sometimes when I disconnect it re-connects almost instantly other times I have to wait about a minute or sometimes even longer even though I can permanently see my neighbours network and my laptop does not have this problem.. I payed �50 for a new wireless card to try and fix the problem and it was fine for a few weeks now it is the same. Restarting the router makes no difference and this is happening all constantly over the last week without fail, i have tried updating my wireless drivers and using different wireless cards.
View 6 Replies View RelatedNetworking :: Does MacBook Pro Keep Disappearing From Windows Network OSx 10.5.8
Apr 26, 2011Running OS X 10.5.8 on an old MacBook Pro on a wireless network. It might be relevant that I recently upgraded the wireless router and the DHCP-assigned IP addresses changed. Before that, everything worked reasonably well.
I can connect to the MBP from Windows 7 computers on the network, logging in with a user name and password, and access the files there as expected.
But the MBP disappears from Windows Explorer after a few minutes. I can usually add it back (always checking the box to remember it) but it just keeps disappearing. Sometimes when it disappears, I can't add it back and when I try, Windows Explorer says, "can't find."
How can I get this share to stick?
D-Link DIR-615 :: Wireless Network Disappearing Off Available Networks List?
Dec 13, 2011I have new DIR-615 D-link router. Since we installed it the network has disappeared randomly off the available networks list, and when I try and open Google Chrome it says there's DNS error. Troubleshooting through windows networks doesn't work because it can't find any problems since my network doesn't even show up on the list. We've even done a factory reset and the problem persists, and it does this about once a day. Resetting the router temporarily fixes the problem. This problem is happening on all 3 laptops in our home, two of which run windows 7 and one which runs XP.
View 1 Replies View RelatedCisco Linksys E3000 Wireless Router / Network Places Keep Disappearing?
Jun 25, 2011Desktop
Windows 7 64-bit -> cable directly to router
Laptop
Windows 7 64-bit -> wireless
Laptop
Windows 7 64-bit -> wireless
Playstation 3
-> Wireless
Xbox 360
LAN cable from router to 360
Scientific Atlanta 2203C modem to a Cisco Linksys E3000 wireless router.Ok, so if I turn everything on I can see all computers from all computers, but after a few hours/days (random time) everything disappears, and I have to unplug the router and then everything is back. Is there a way to stop this, and just have everything just be there all the time?
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJohn>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : John-PC
Primary Dns Suffix . . . . . . . :
[code]....
Hosts File Disappearing?
Jun 7, 2011We have a modified hosts file on each of the computers here at work. This way we can have multi servers, in multi locations that can all be used by everyone for email & our finance program.However, there is one user who the hosts file keeps disappearing. Over the last 2 days it has disappeared 3 times (at least).The user has ran the symantec corp antivirus (at least a couple of times). All risks found have been quarentined and deleted, ran again and nothing found. Also ran Malwarebytes, which was clean. And ran ComboFix.At this point the hosts file has been fixed after running ComboFix.
View 14 Replies View RelatedIcon Constantly Disappearing Then Reappearing Within A Second?
May 9, 2012It's been doing this for over 7 or 8 hours now. And no, there's no network connection, that's what the problem is here. This is a Windows XP desktop.Basically what it's doing is within a second, this icon disappears from the taskbar, then reappears, over and over again: When I hover over it, it gives me a message about not being connected. I can't get the exact message screencapped and I can hardly even read it, it disappears too quickly.Sometimes it gives me this instead, and the connection works, but only for as long as this icon is there:But it disappears too quickly for me to load any pages completely, so they always end up being incomplete pages. When I hover over this one, it says acquiring network address.When I click repair, it gets stuck on "renewing IP address" every time, without fail.
Previously the internet connection would drop occasionally, but restarting the computer has always brought it back. I have tried this countless times by now, I have tried clicking repair, I have tried resetting the router, I have tried manually removing the connection then reconnecting to it, I have tried command prompt and running through the ipconfig flushdns, release, and renew commands, I have tried logging on as a different user account, I have tried uninstalling my wireless adapter software then reinstalling it, I have tried using a different adapter [I get a different error with that one], I have ran a scan with Malwarebytes' Anti-Malware then retried all these things, but that didn't fix it either. If my brother wasn't asleep I'd be wiping the hard drive by now as a last resort. And I will be doing this first thing in the morning if it isn't fixed.
There is one other computer on the wireless network, and its connection never drops. Ever. It's a Windows 7 laptop. There are two other computers in the house, but they both connect using the ethernet cable, and those never drop, either. The two Wiis, the Xbox 360, and the 3DS also connect wirelessly, and one of the Wiis drops occasionally as well -- and it's not connecting right now, either.There is one more PC in the house, which also runs Windows XP, but I haven't gotten it to connect in weeks and I've pretty much given up on it. It'd be nice to get that to run, too, since I have to share this computer, but it's 7 years old, it's just too old and is stuck on "acquiring network address" with either adapter, if I'm remembering right.
This is everything I know. This problem is still occurring, and it just occurred randomly today, while the computer wasn't even in use. I can connect to the internet with a wired connection, but stretching the wire across the house isn't something the homeowner wants me to do, so I can't keep it permanently, as much as I desperately want to.I looked around at a few other threads and there was some sort of Wifi program I can install? But it won't install. Or rather, the .net framework is what's not installing. So I guess I can't use that. Hope it makes finding the problem still possible though, this is the only computer I have left since my other one won't connect anymore either.
Wireless Physical Adapter Keeps Disappearing?
Aug 6, 2011I've had a strange problem with my laptop for quite a while now. From time to time, my entire wi-fi capability vanishes. The green wi-fi light goes off and my Intel PROset/Wireless tells me that I do not have a wireless physical adapter installed.From there, I go to Network Connections. Sometimes, I can hit "repair" under Local Area Connection 3 and after some struggles, the green light will come back on. However, sometimes when I go to Network Connections, I cannot repair the Local Area Connection, because the 1394 Connection is no longer even listed and, from all ways of searching, doesn't even exist on my laptop.In that case, I have to restart my laptop. Sometimes, a restart works and the wi-fi capability magically returns. Sometimes a restart does not work, and I have to power off, wait, and power back on my laptop. And sometimes, I have to keep rebooting SEVERAL TIMES in a row before I get wi-fi back.
I'm not sure what to do for it, nothing has changed with the router or the location of the router. My laptop will be fine for a couple of weeks, or I may lose wi-fi ability a couple of times in a week or so. However, at the moment, I lose my wi-fi adapter frequently, often every two minutes to perhaps every ten minutes. It has "acted up" this badly only once before (probably a month ago), and I just keep rebooting for a couple of days until everything seemed to calm down. However, I can't keep just restarting my laptop every five minutes
Cisco VPN :: Pix 501 Disappearing Access Rules
Oct 5, 2011I have a Pix 501 vs. 6.3(3). I have made changes to some Access Rules that made other rules disappear. When I try to recreate them I get an error that includes "Possible duplicate entry" statement.
The rule appears to be active, so how can I resurrect it in my Access Rule list?
Gateway NV53 Wireless Adapter Disappearing?
Sep 24, 2011I'm trying to diagnose & repair a problem with the built in wireless adapter on a gateway NV53. The OS is 64 bit Win 7. The computer isn't mine, I was just trying to repair it for a friend. Initially, the wifi worked fine; the disk drive seemed to have a bad laser or something, sometimes there were problems with printers, it was slow to start, etc., so I thought I would just backup everything, "restore to factory defaults" (reformat & reinstall OS from hidden partition), then copy everything back / reinstall programs. I wanted to reformat just to clean it up, etc. After reformatting and updating windows to the latest version, it seemed to work fine (I hadn't tested those other problems, they are unimportant). However, after the computer is on for awhile - anywhere from a few minutes to a few hours - the wireless adapter suddenly can't see any networks. There are several networks in the area, so I know it isn't a problem with my router (also, other comps. can see them all still) After awhile longer, the wireless adapter disappears completely from device manager. I think that when it initially loses track of all the networks, the mouse, typing, etc. slow down and have jerky movement for a minute (may be incidental). When I restart the computer, the adapter works fine again, but of course, only for awhile.
Things I've tried:
-Setting the power settings on the adapter (don't allow power saving to turn this off.. box)
-reformatting
-updating drivers
-updating windows
-running antivirus
-uninstalling the antivirus
Cisco VPN :: 1941 Disappearing IPsec Routes With RRI
Aug 26, 2012I am trying to set up a pair of 1941 routers in a HA configuration to act as L2L VPN gateways. The active router of the pair should distribute routes to the remote destinations using OSPF to internal routers. The VPN part is working fine and the routers are correctly advertising routes to internal hosts, however my problem is that when an IPsec sessions disconnect, the routes disappear and therefore internal hosts cannot reestablish a connection. If the remote end establishes a connection, the routes appear again and connectivity is restored.
My setup is as follows: (ASA) --> (pvpn01 & pvpn02 HA pair) --> (internet) --> (remote peer)
The other router in the pair has exactly the same config except with different interface IPs. The remote end is configured to talk to the HA address
91.216.255.248.The VPN routers are both running IOS version 15.0(1r)M9.
When I initially boot the routers, the route for 192.168.66.0/24 appears in 'show crypto route', and is advertised to neighboring routers. If I ping an address on that network an SA is established and stays active as long as there is traffic flowing. pvpn02#show crypto route
If I then stop traffic flowing over the tunnel and wait until the IPsec SA lifetime is expired, the route is deleted from the system routing table and therefore not distributed by OSPF. The result is that internal hosts cannot reestablish the tunnel as the other routers have no route to the 192.168.66.0/24 network.
Is this a bug, or is there another way to get the RRI routes to persist on the active router?
Wifi Disappearing Refusing Authentication From Multiple Devices
Aug 17, 2012The original network had a Zylex router, Netgear Switch. There was 2 pc's, one XP and Win 7. There is also 3 tills connected too. There is VPN network connected too. This emits a wireless signal to connect to a scanning gun and is also used to administrate the entire network. I was told by the Administrator of that network that it shouldn't interfere with the wifi network.
The job I was requested to do was to install 3 new wall plates as the Win 7 pc was using a Belkin wireless adapter. There was 2 put inside the office where the XP and Win7 pc's are located. The 3rd was just outside the office.
Now all the ethernet connections work 100%. The wifi is another story though. It will show up in the connect too, when you try connect it will disappear/no response from AP/connect then disappear, these are random too. No order to when each is error is displayed. Even when I put in another router the exact same issues happen.
I have tried to connect to both routers wifi when it wasn't plugged into the switch. Just the router's turned on with no cables plugged in separately of course, no joy same issue with both.
Zylex Router - Wifi Disappearing / Refusing Authentication From Multiple Devices?
Sep 15, 2012The original network had a Zylex router, Netgear Switch. There was 2 pc's, one XP and Win 7. There is also 3 tills connected too.There is VPN network connected too. This emits a wireless signal to connect to a scanning gun and is also used to administrate the entire network. I was told by the Administrator of that network that it shouldn't interfere with the wifi network.The job I was requested to do was to install 3 new wall plates as the Win 7 pc was using a Belkin wireless adapter. There was 2 put inside the office where the XP and Win7 pc's are located. The 3rd was just outside the office.Now all the ethernet connections work 100%. The wifi is another story though. It will show up in the connect too, when you try connect it will disappear/no response from AP/connect then disappear, these are random too. No order to when each is error is displayed. Even when I put in another router the exact same issues happen.I have tried to connect to both routers wifi when it wasn't plugged into the switch. Just the router's turned on with no cables plugged in separately of course, no joy same issue with both.
View 2 Replies View RelatedLinksys Wireless Router :: Ea4500 Wifi Signal Disappearing For Few Seconds
May 6, 2012My new EA4500 works fine all day, both wireless and wifi, on both bands, but nearly every evening, the wifi signal disappears, as shown on a wifi app for my smart phone, but not on Issid on my laptop, strangely, and my PC laptop and iPad both disconnect, then reconnect. Smart phone disconnects too. It isn't like the signal drops in strength, it just goes away! I have tried various settings on modes, and bandwidths, I am using different SSID's on each band, WPA2 security with a long non-dictionary passphrase and MAC filtering. The hardwire connection works great at 30+ Mbps even when the wifi is disappearing from the wifi scanner and the wifi connections are dropping. In other words, the cable connection/modem is working fine, but the wifi radio signal stops or the SSID drops off the signal. I really can't tell, but I know it is becoming very frustrating. The old WRT54GS works fine if I put it back on-line in the evening when these things start to happen.
I have turned off everything I can think of in the house that transmits or might transmit, in case it is an interference thing. I have tried disabling the 5 GHz side, since I can't see what is happening on that band, and the last thing I tried was changing the MTU from 1500 to 1400. So far, the past evening, it was okay, but I am not confident it will stay that way.
Dell :: Studio 1537 Wireless 370 - Bluetooth Stereo Headphones Disappearing
Dec 26, 2009I have problem with using my dell studio 1537 with platronics pulsar 260 bluetooth stereo headphones. After some time listening music bluetooth just disappearing from system, bluetooth indicator is on and not reacting for wireless switch. My OS is Win7x64, mini-card driver 6.2.0.9000, bt audio driver 6.2.0.9500. With other bluetooth functions, such as bt mouse or pda sync, i have no problems.
View 21 Replies View RelatedHome Network :: Private Network Within A Larger Network?
Nov 14, 2011I have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.
Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options.
Access Internet Using Wireless Network And Printer Using Separate Wired Network At Time?
Apr 4, 2012I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies View RelatedWindows 7 Laptop With Atheros AR9285 Network Card Can't Connect To Wireless Network?
Aug 21, 2012This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedSharing :: Change Network Settings So Internet Connection Appeared As Public Network
Jan 25, 2011I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.
View 5 Replies View RelatedD-link Dcs Network Camera :: Netgear Cgd24n - 942l Just Won't Connect To Wifi Network
Sep 2, 2012I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
D-Link DCS Network Camera :: 2121 - When Plugged In Without Network Cable / Status Led Remains Red
Mar 26, 2011I connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.
View 2 Replies View RelatedHome Network :: Use Laptop As Network Tap Between (DSL) Modem And Wrt54gs By Creating A Bridge?
Jan 8, 2013I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
Home Network :: Setup A DC++ HUB For Sharing Data Within The University Local Network?
Feb 13, 2011I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
View 4 Replies View RelatedHome Network :: Linksys WRT54G With DDWRT Firmware / Network Goes Down Randomly
Aug 16, 2011I have a crappy router/modem from comcast with two windows machines and a linux web server connected. I also have another router, a Linksys WRT54G with DDWRT firmware with WAN connected to the modem/router. The linux web server has a static IP, configured with /etc/network/interfaces The network goes down randomly. Disconnecting and rebooting the linux web server usually fixes it. It's possible that the WRT54G could be at fault as well.The problem is that I just don't have any information on what is happening on the network. (Well even if I had the information, I'm not sure I would know what to do with it) I installed wireshark, I figure I should just leave it running until the network goes down, then I can go through the packets and see if I see anything weird?
View 4 Replies View RelatedCabling / Cards :: Unidentified Network - Cannot Access Internet With New Network Adapter
Oct 8, 2012i can search for networks. As you can tell i am currently on the internet on my laptop. I can search for the current network i am on through my adapter. I then connect to it. It says im connected to a unidentified network. It will not let me search the internet or anything else.
View 9 Replies View RelatedHome Network :: Add Printers To Local Wireless Network Without Sharing From Computer
Mar 3, 2012I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies View RelatedCisco :: PIX 525 Firewall / Voice Network Not Working After Data Network Migrated
Feb 28, 2012My company have a Cisco PIX 525 firewall which is cater for NOC internal data network and also voice network, the subnet for data network is 192.168.2.0/24 and the subnet for voice network is 172.16.2.0/24. someday this NOC firewall was faulty. I was migrated the data network from this NOC firewall to the other temporary firewall just at the moment. And the voice network i migrated it from where it orginal at NOC firewall to a VOIP system which actually having a connection with my temporary firewall(This temporary FW only to take the traffic of data network). After the migration of data network from old firewall to temporary firewall and also the migration of voice network from old firewall to PABX system. The subnet for data network remain the same as 192.168.2.0/24, but the subnet of voice network i edit from 172.16.2.0/24 to 192.168. 3.0/24.Now when i want to use one Cisco router 2600 to replace this temporary firewall then facing problem at the voice network....The data network after migrated from temporary firewall to new 2600 is ok, users can browsing. But when i trying to at the same time when the data network been migrated , it will affect the voice network which still located at PABX. ..user cannot make call...I was thinking reason because this voice network which currently in 192.168.3.0/24 is tight to somewhere on the 192.168.x.x at the old firewall internetwork. So, when i migrated the data network over to new router, it will also cause the failure of voice even thought after i migrated the voice system to new router.So when i do the disaster recovery back to the temporary firewall for both data and voice. The voice is resuming to normal.
View 4 Replies View RelatedD-Link DCS-930L :: IPhone App OK Via Home Network (Mac) / Can't Connect Via Cell Network
Apr 7, 2011Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
View 1 Replies View RelatedCisco WAN :: 1841 WIC To Configure BRI Interface In Network Protocol Emulate Network
Apr 5, 2011I'm trying to configure my BRI interface in "network protocol-emulate network" and "layer1-emulate network" but i don't have this second command.Is someone have allready to that with this type of interface ?I've to configure this because the ISDN line of my telco is in user mode only.
View 5 Replies View RelatedCisco :: Enable Guest Network Authentication In Network With WLC 4404 Controllers And No WCS?
Feb 18, 2013What's the least expensive way to enable Guest Network authentication in a network with WLC 4404 controllers and no WCS? Management would like guests to register with a valid email address and enter a 'password du jour' to keep unauthenticated users from chewing up bandwith with automatic connections.
View 4 Replies View RelatedHome Network :: Cisco Linksys E1500 - Wireless Security Protocol For Guest Network?
Oct 29, 2012Having an issue with a Cisco Linksys E1500 on a home network. The device has a feature to provide a guest wireless network but the guest network can't get to the internet. A wired connection is fine, as is the normal wireless network but not the guest. The cheesy thing is, that it doesn't list an option for what type of wireless security protocol you want on the guest network. I'm assuming that it uses the same security protocol that the normal wireless network uses, but who knowsEspecially weird is that it asks you what password you want on the guest network but then the guest network show to be insecure when you try to connectthought maybe it was something funky with some of my configurations so I went ahead and factory defaulted it and just set it up with an insecure network for both the normal and guest networks. This didn't solve it. The guest network still couldn't get to the internet. In fact, the guest network can't even ping the router.
View 1 Replies View RelatedHome Network :: Use Access Point As Main Network Device
Aug 15, 2012I currently have a BT Home Hub 3 router and an Ubiquiti Power AP N.What I am trying to do is use the Ubiquiti access point as the main device for all connections in my house (ethernet and wireless) so that I can use the QoS settings etc. I basically want the Home Hub router to play as little role as possible in the network except for providing the ADSL internet connection.I know I need to enable DHCP on the access point but everytime I do so the devices connected to the access point lose internet connection.(BTW I have an ethernet cable connected from one of the routers LAN ports into the access point's WAN port)
View 2 Replies View RelatedNetwork Switch Managed Vs Unmanaged High Network Speeds
Jun 5, 2011I'm looking to connect my 50+ drops I have in my home based business. I transfer large files 5+gigs on a regular basis between the machines. I currently just have some cheap Netgear 8port, gigabyte switch's but when transferring files I max out around 12-15mb/sec. This takes WAY too long to transfer files.
I need a network switch so I can get my speeds up to 60+mb/sec at least. (my seconds job office has this ability)
What would I need to get this kind of speed? All my cabling is CAT6, with CAT6 ends. Would I need a managed switch to get this kind of speed?
I was looking at a couple switches. Cisco Sg 100-24 24-PORT Gigabit Switch $374 or Cheaper option Netgear Prosafe GS724T-300NAS 24 Port Gigabit Smart Switch W/ Rack Mount Kit $199
Or is there something else I could go with in this price range?
