Zylex Router - Wifi Disappearing / Refusing Authentication From Multiple Devices?
Sep 15, 2012
The original network had a Zylex router, Netgear Switch. There was 2 pc's, one XP and Win 7. There is also 3 tills connected too.There is VPN network connected too. This emits a wireless signal to connect to a scanning gun and is also used to administrate the entire network. I was told by the Administrator of that network that it shouldn't interfere with the wifi network.The job I was requested to do was to install 3 new wall plates as the Win 7 pc was using a Belkin wireless adapter. There was 2 put inside the office where the XP and Win7 pc's are located. The 3rd was just outside the office.Now all the ethernet connections work 100%. The wifi is another story though. It will show up in the connect too, when you try connect it will disappear/no response from AP/connect then disappear, these are random too. No order to when each is error is displayed. Even when I put in another router the exact same issues happen.I have tried to connect to both routers wifi when it wasn't plugged into the switch. Just the router's turned on with no cables plugged in separately of course, no joy same issue with both.
View 2 Replies
ADVERTISEMENT
Aug 17, 2012
The original network had a Zylex router, Netgear Switch. There was 2 pc's, one XP and Win 7. There is also 3 tills connected too. There is VPN network connected too. This emits a wireless signal to connect to a scanning gun and is also used to administrate the entire network. I was told by the Administrator of that network that it shouldn't interfere with the wifi network.
The job I was requested to do was to install 3 new wall plates as the Win 7 pc was using a Belkin wireless adapter. There was 2 put inside the office where the XP and Win7 pc's are located. The 3rd was just outside the office.
Now all the ethernet connections work 100%. The wifi is another story though. It will show up in the connect too, when you try connect it will disappear/no response from AP/connect then disappear, these are random too. No order to when each is error is displayed. Even when I put in another router the exact same issues happen.
I have tried to connect to both routers wifi when it wasn't plugged into the switch. Just the router's turned on with no cables plugged in separately of course, no joy same issue with both.
View 2 Replies
View Related
May 6, 2012
My new EA4500 works fine all day, both wireless and wifi, on both bands, but nearly every evening, the wifi signal disappears, as shown on a wifi app for my smart phone, but not on Issid on my laptop, strangely, and my PC laptop and iPad both disconnect, then reconnect. Smart phone disconnects too. It isn't like the signal drops in strength, it just goes away! I have tried various settings on modes, and bandwidths, I am using different SSID's on each band, WPA2 security with a long non-dictionary passphrase and MAC filtering. The hardwire connection works great at 30+ Mbps even when the wifi is disappearing from the wifi scanner and the wifi connections are dropping. In other words, the cable connection/modem is working fine, but the wifi radio signal stops or the SSID drops off the signal. I really can't tell, but I know it is becoming very frustrating. The old WRT54GS works fine if I put it back on-line in the evening when these things start to happen.
I have turned off everything I can think of in the house that transmits or might transmit, in case it is an interference thing. I have tried disabling the 5 GHz side, since I can't see what is happening on that band, and the last thing I tried was changing the MTU from 1500 to 1400. So far, the past evening, it was okay, but I am not confident it will stay that way.
View 6 Replies
View Related
Aug 15, 2012
Can I use a USB hub to connect multiple usb devices to a single usb port on a wireless router? I want to connect a usb printer, usb scanner, and usb external hard drive.
View 1 Replies
View Related
Dec 31, 2012
I am looking for a modem and router for multiple devices, we have 3 phones a lap top, PS3, and Xbox 360. i have thought about adding an addition phone line with internet so we have to connections?
View 1 Replies
View Related
Oct 2, 2012
I want to connect my ps3, sky hd+ box and samsung smart tv. Upstairs is my wireless router and I have connected to this by using a power supply networking adaptor (duvelo). I have since purchased a cheap ethernet switch from ebay and plugged this into the power adaptor connection next to my ps3, sky hd+ and samsung smart tv downstairs. I thought by connecting these 3 devices to the switch (which is connected to the duvelo adaptor) I could have all 3 devices simultaneously connected online. However, I still can only have 1 ethernet cable in the switch at once and hence only connect 1 device at a time.
View 2 Replies
View Related
Jun 8, 2012
I just moved into a new place and the cable company supplied me with a Motorola sbg6580 gateway and I have a netgear wnr3500l router with dd-wrt. because of location I have computers plugged into both devices (htpc and game consoles in the gateway, desktops in the netgear). how would i configure the gateway and router so everything sits on a single network AND the netgear with dd-wrt handling all the heavy lifting (port forwarding mostly)
View 2 Replies
View Related
Nov 4, 2011
I have a net gear WNR2000vs with the latest firmfware to date.wired devices connected: 1. my pc 2. xbox, and also one wireless device connected to my cell phone via wi fi.
View 9 Replies
View Related
Jul 21, 2012
I just bought the E3200 and have it all set up and have been able to successfully print from the USB port. I want to know if you can use a USB hub to connect multiple devices to the router. I found a couple of similar questions on the forum, but they're all back in 2011 before the 1.4 update to Cisco Connect.
View 1 Replies
View Related
Oct 14, 2012
I got the new EA6500. For the last few days I've noticed there are multiple devices showing under one device with different IP addresses. In the beginning they show up individually with their own device names, then somehow combine. Each device is different ie. computer, phone, DirecTV box, etc. I did a hard reset, re-flash and still it keeps happening.
View 9 Replies
View Related
Jan 18, 2012
I have a Linksys Wireless-G WRT54GS with SpeedBooster.When I turn on 3 devices on Wi-Fi ( for instance 2 Apple MAC Computers, 1 Windows PC, and a wi-fi printer ), in other words 3 to 4 devices, everything works fine. BUT when I add another device later in the day ( lets say an iPad ), the iPad is not able to access the wi-fi connection. I get a message saying that another device is already using the connection.If I reset the router, then the iPad will be able to get in along with 2 or 3 other devices. If I try an extra device, I get the same problem.What can be causing this? I was under the impression that the router can handle an unlimited amount of wi-fi devices.
View 4 Replies
View Related
Dec 25, 2011
My PC will connect just fine, but it is the only device on my network that the router will allow internet access. The router will allow other devices (DVR, laptop, nook) to connect to it, but won't allow those devices to connect to the internet. Each device will show the same error, - "connected to linksys - no internet". I've reset the router many times with no results.
View 1 Replies
View Related
Dec 9, 2012
Once your devices start showing up in your device list make a DHCP reservation for each device. (after confirming that no other devices are listed under it).
If you have a device that has multiple MAC & ip addresses under it you MUST first determine what the devices are listed & power-down before you can delete the device. Also note that some wired devices will still show as connected so you must have to either power down the device by pulling Th power cord OR disconnect the ethernet cable.
View 2 Replies
View Related
Jan 7, 2012
What's happened is that after transferring my old PC's data onto my new one, and putting that one in place of my old one, therefore hooking up my modem to it, my wireless devices have been having trouble connecting to the router. Everything's hooked up fine, and it was working perfectly before, but now my devices such as my laptop and Droid Pro can SEE the router (As in connect to it and say that they are getting excellent signal strength), but when I try to open my browser, it asks as if I'm not connected to anything at all. The PC that's wired to the modem through the router works fine, however.
View 14 Replies
View Related
May 29, 2011
My 7 inch netbook authenticates to a wifi network with short network key but cannot authenticate to one with a very long key. I am using Win CE 6. The encryption method is AES, the authentication method is WPA-PSK. The short password key is 9 digits consisting only of numbers and letters. The long key consists of 35 digits, with spaces, capital letters, numbers and an exclamation mark.
View 2 Replies
View Related
Feb 7, 2011
I am in a manufacturing test scenario and need to connect multiple devices with the same IP address (identical hardware all with the same fixed IP) to one Windows 7 desktop for the purposes of testing.I have a 3Com SuperStack II Switch 1100 that I am using as my switch. This switch supports VLAN and I have set up a number of VLANs, 1 for each device, with the host machine residing in all of the VLANs. I need to connect to these devices via SSH, preferably all simultaneously.'m thinking this will work except I have no idea how to differentiate ssh traffic to/from any 1 of the VLANs to the host.
View 13 Replies
View Related
Jan 21, 2013
I cannot connect to the WiFi router, an all-in-one modem+router provided by my ISP. Now, I run an Ethernet cord from the router to my computer: the computer works just fine. As of a day ago, though, none of the home's Apple devices will connect to the network, despite reboots, password retypes, and shouting at them. Each device (two phones and an ipad) can identify my network, but they cannot join. Additionally, there is an old laptop that cannot connect anymore.
View 7 Replies
View Related
Oct 4, 2012
The laptops and the desktop in my home connect perfectly fine to our wifi, but all other devices like our iPhones, iPads, Nintendo DS, Nintendo Wii, and a 2006 hp laptop will either show a connection, but the connection doesn't actually work, or there will be a broken connection shown to our wifi. All these devices (except the Nintendo devices[only because we haven't tried it out]) will connect and perform on wifi elsewhere.We have a d-link router?
View 5 Replies
View Related
Jun 25, 2011
Desktop
Windows 7 64-bit -> cable directly to router
Laptop
Windows 7 64-bit -> wireless
Laptop
Windows 7 64-bit -> wireless
Playstation 3
-> Wireless
Xbox 360
LAN cable from router to 360
Scientific Atlanta 2203C modem to a Cisco Linksys E3000 wireless router.Ok, so if I turn everything on I can see all computers from all computers, but after a few hours/days (random time) everything disappears, and I have to unplug the router and then everything is back. Is there a way to stop this, and just have everything just be there all the time?
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJohn>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : John-PC
Primary Dns Suffix . . . . . . . :
[code]....
View 3 Replies
View Related
Sep 26, 2011
I would like to connect a variety of wireless devices in my house to my work VPN while allowing other devices in the house access to my home network as normal.I was hoping to find a wireless ADSL router that allows me to associate a LAN port to a VPN connection, then connect a wireless access point to that port. I could then run two wireless networks in my house, one that would connect to my work VPN and the other that would not.
View 1 Replies
View Related
Nov 19, 2012
My neighbor and I were wondering if it is possible to combine our respective internet connections in order to gain a faster connection overall. What would be ideal would to have a wireless router in one of our houses, that is simultaneously connected to both of our ADSL routers, and to which both of us are able to connect. Do I need a specific type of router?
View 5 Replies
View Related
Aug 18, 2012
I'm having issue with wireless connection on Belkin router F5D7633-4.Every 1-2 days my router disconnect and reconnect for no apparent reasons. When this happens, it affects it's wifi. All the devices in my house couldn't connect via wireless to this router. The only way to get these devices connected is to manually reboot the router.Do you know how to allow the router to allow many devices connected at same time?
View 2 Replies
View Related
Aug 6, 2012
I've done a firmware upgrade to latest version v4.21.5 yet my Wifi still isn't broadcasting for my devices to find and connect as of last night (Aug 5, 2012). This hasn't happened before, so I was hoping it would return but still hasn't started working yet.My iphone just says "unable to connect."
View 4 Replies
View Related
Mar 19, 2013
To preface this message I need to state that I am functionally illiterate when it comes to any kind of networking. I just replaced an old Linksys wireless-G router with a new Linksys EA6500 router. My needs are as follows: I am connecting 4 desktop computers (two personal and two business) via Ethernet cables. In addition there will be three smart phones, two DVD players and one game console connected wirelessly. In the future I will add a printer, hard drive and more wireless devices. After installing the hardware and running the setup disk all four computers wired with Ethernet cables worked fine (although they are not set up to communicate or share files with one another - they only need to access the internet. My problem is with the wireless connectivity. I cannot get any one of the wireless devices to work.
View 3 Replies
View Related
Mar 31, 2013
I just purchased a Linksys EA4500 (firmware is up to date). However while it set itself up wonderfully. I cannot get my wireless devices (specifically my apple tv) to see my NAS or my itunes PC, My ipads can access the NAS if i put in the correct address but not automatically.
Everything is connected to my cisco switch that is hardwired (2 xboxes, 2 ps3, 3 tv's, Wii, network audio receiver, 2 NAS, printer, 2 computers, etc). I disabled the Wi-Fi on the bell router. On the wifi are a few ipads, 3 blackberries, 1 iphone, 2 laptops).I am fully aware that the reason the wireless devices cannot see the hardwired equipment is because it is on a different subnet.
However when i try and change the IP address of the router to 192.168.2.2 (putting it on the same subnet) the router must detect a conflict then changes itself to a class A address (10.x.x.x) OR i get an INVALID IP address. As well i have noticed an overall degradation in the speed of my network (all gigabit hardware with cat 6 cabling)
View 2 Replies
View Related
Jun 19, 2011
I have my pc connected to the router with a cable. As soon as I switch it on I can't connect with any of my wireless devices like my laptop, tablet, mobile phone. As soon as I switch off the computer it works fine with all devices.
Is this a setting where the cable connected pc gets preference that I could switch off?
View 9 Replies
View Related
Aug 2, 2012
I'm facing a problem related to devices authenticating to our wireless network. Below are how it is setup:WLC 4404 pass authentication to ACS 5.3 (PEAP + MsChapV2) then to AD server.Client can get stock in this status and it keeps repeating from 1 to 20.
View 4 Replies
View Related
Jun 11, 2012
We are using acs version 4.2.0 build 124 on windows server 2003. Our domain controller has been upgraded from 2003 to windows 2008 R2.Now we are facing following error in ACS authentication for accessing our devices.Error: AUTH 06/09/2012 11:55:40 E 1810 3316 0x8f21 External DB [NTAuthenDLL.dll]: Windows authentication FAILED (error 1326L)if we restarted services of ACS server then users get authentiated fine.
View 1 Replies
View Related
Feb 5, 2012
I lost it on my old laptop. Figured it was time to get a new computer anyways, we bought a new one, along with a Playbook. Both the new computer and the Playbook have had this problem, though they were able to fix it.They all use Wi-Fi.
View 2 Replies
View Related
Apr 5, 2012
We can only connect 2 devices at a time. Someone suggested that it may be a setting with my wireless router.
View 2 Replies
View Related
Feb 3, 2013
I have acs 4.2 for windows installed on a windows server 2003 box, because of a merger I need to now authenticate against 2 different domains, there is a bidirectional trust between the two domains and the dial-in permission has been set in ADUC but whenever I try to authenticate a user it says dial-in permissions needed in the acs failed authentication log.
View 5 Replies
View Related
Dec 26, 2012
I just installed an older router (WRT120N). Purchased an adapter for desktop and wireless connection for destktop works. Cannot get other devices to use the wifi (iphone, ipod, android phone...). I am at a loss. Saw some suggestions about disabling a Upn or something under the router's LAN properties
View 1 Replies
View Related
Apr 21, 2013
My E3000 has been working fine with 1.0.04 build 6 FW. Recently some devices (kindle, iPad) can't connect to internet while connected to E3000 via WiFi network. Had a look my E3000 router IP is 192.168.0.1 but those problematic devices has IP 192.168.1.XXX allocated by DHCP not sure why. Currently I manually set up static IP 192.168.0.XXX for those devices.
View 1 Replies
View Related
