Linksys Wireless Router :: 1550 / Cisco Connect Not Connecting?
Jan 21, 2013
I've been trying to change the Parental Controls on my Linksys 1550 router, but I can't get Cisco Connect to finish startup, I keep getting an "unexpected Error". I have tried making the changes through the Ip login, but when I click the Access Policy tab, I just get a blank screen, but all the other tabs work fine. I do have an error report. It is as follows:
Error code: 82BD0304
Error description: An HNAP call to the device failed because the HTTP connection was broken.
Model name: unknown
Model number: E1550
Serial number: 10C10C17103688
Firmware version: unknown
Operating system: Windows Vista SP 2
Software version:1.4.11350.0
Connection type (WAN): unknown
IP address (LAN): unknown
IP address (WAN): unknown
Computer IP address: unknown
View 3 Replies
ADVERTISEMENT
Aug 27, 2011
I have an E4200 wireless router which is connected via USB to my Canon MX 308 printer. I am able to print from Windows computers that are connected to this router (via WiFi of course). My iPad 2.0 is able to connect to the internet via the router. However I am not able to print content from my iPad via the E4200 router (via Wifi using Cisco Connect software).
View 1 Replies
View Related
Mar 31, 2012
i have a client company that needs to extend their network. i am advising them to purchase the cisco aironet 1550. does the wireless AP support all the communication that is generated by SAP business one? Also, if this AP is placed outside on a over their offices, what is the estimate range that it will cover knowing that their offices are only one story high but do have a big shed that contains some production machine and metals everywhere
View 1 Replies
View Related
Nov 27, 2011
as per reading documentation, i only see the dual-band antenna option for this device. i am planning to use this for mulch-site bridging. can i substitute the dual-band antenna with a single-band high gain antenna for such deployment?
View 2 Replies
View Related
Aug 9, 2011
Can I Deployed a wireless mesh w/o WCS? is it necessary? I have 5 1550 AP, WLC (12 AP license) and 1 Catalyst Switch. With all these can I Install a wireless mesh.
View 2 Replies
View Related
May 25, 2013
I have Dell Vostro 1550 Laptop.Os- window 7 ,32 bit.Earlier I had window 7,64 bit on my laptop ,when I install 32 bit window on it after a clean format, Everything work perfectly except the bluetooth.I tried several bluetooth drivers but none of them fix my problem.I received an error while installing the bluetooth driver that the" system has been modified can't install the driver".when I tried another driver then it says please activate bluetooth first ,when I did so by pressing the function keys then a message appears on the screen saying "starting bluetooth" after few minutes the msg disappears and nothing happens,it doesn't start the bluetooth.
View 3 Replies
View Related
Mar 19, 2013
I have Dell Vostro 1550., I have reinstalled win 7 home basic service pack 1, installed all drivers,then did windows update. In my device manager network controller and BCM43142A0 shows error marks. I can't use my WIFI.
View 3 Replies
View Related
Aug 24, 2011
I am having trouble with our ASA5510. After upgrading the internal memory from 256 MB to 1 GB and upgrading the firmware to 8.4.2 we are experiencing that the ASA is running out of 1550 byte blocks. When that happens it is not possible to connect to the ASA by ADSM or SSH and new VPN IPSEC tunnels are not coming up. The only way I know how to fix this is to reload the ASA. This is happening every 2 to 3 days.
In the free blocks graph one can see that there is a loss of about 20 blocks per 10 minutes.
View 4 Replies
View Related
Jun 21, 2012
I have a WRT160Nv2 and I have a stack of 5 static ip addresses. I have the entire store wired and everything is working great, except my DVR. I cannot get it to work on the network. Should I use one of the static ip's or not?
View 9 Replies
View Related
Feb 4, 2013
Connect my primary router EA4500 to another EA4500?
I tried and followed the steps provided here but it doesn't work at all for the Xth time already.
The first router installed and ran flawlessly in minutes. The second one has failed to work in bridge mode for 3 hours now.
View 4 Replies
View Related
Apr 2, 2012
I borrowed a linksys wireless broadband router from my uncle and tried to connect it to my pc.But it is not connecting..i mean i connected an ethernet cable to my router to pc and waited for the light on the modem to become stable..and tried to go to ip address 192.168.1.1..the page not opening....it shows THE WEBPAGE NOT AVAILABLE ...but it worked perfectly for my unclE...eventhough i disconnected power cable and tried resetting but it is of no use ROUTER MODEL NO.WRT54GC ver 2.0?
View 1 Replies
View Related
Oct 4, 2008
I've tried to connect my father's laptop and my father's girlfriend's daughter's PC to my Linksys Wireless Router, model #WRT54G2 V1. So far, I have steady and fast internet access on my PC which so far I've only gotten my father's laptop to connect through. However, I can't figure out how to get her PC to get internet access through my router. I'm mediocre at configuring computers, and I'm absolutely terrible at routers. :/ There was the possibility that her computer isn't new or advanced enough or whatever to be compatible with a wireless router, but at the same time she has a Wireless Network Setup Wizard app. in the control panel area, so wouldn't I be correct in assuming that if a computer has a wizard dedicated to it, it is compatible? I've run Wireless Network Setup Wizard as well as just plain Network Setup Wizard, and I've had them both read that it was successful connecting to my Router's network...but where do I go from there? I've never had to mess with a PC before so I'm not entirely sure. She has a modem, which can not be plugged into the phone jack at the same time as my modem otherwise we both do not have internet access, however if one of us plugs in that person is fine, so that's when I figured I'd try to get her PC into my network with my dad's laptop. Also, we have a Broadband connection setup through Verizon, if that matters at all. Does she need a modem to hook up to my network at all? If so, does that modem need to be plugged into the phone jack? If required I'll give her OS and PC specs and such, but from what I know just being on her computer she runs Windows XP as an OS and her computer is an "eMachine".
View 9 Replies
View Related
Aug 30, 2012
I have a WRT600N dual band router and have only been able to connect to the 5Ghz when it's network mode was set to mixed. I also have a Dell Wireless 1505 Draft 802.11n WLAN Mini-Card. When setting the Network mode on my router to Wireless N-Only I am unable to connect to the network. I have been searching all over the internet for how to fix this, but none of the answers suit me. I have my network security set to WPA2 with an AES encryption, like people keep saying so I know that is not the problem. Others say that I need to set my wireless adapter to N-Only as well, but I have not been able to find anything in Google that shows me how this is done. The driver version for my adapter is 5.60.48.18 and is up to date according to Windows.
View 9 Replies
View Related
Oct 12, 2011
I have two PC's hardwired to this router that are working okay (although performance has been choppy lately). The past 4 days however, when I try to connect wirelessly I get connections that are repeatedly dropped. I am in the Settings section of my iPad 2 and it keeps rapidly switching between "connected" and "not connected". Firmware is up to date.
View 4 Replies
View Related
Aug 8, 2007
Just got WRT300N for connecting my ps3 thru wi-fi. I got everything works but the signal that I got from my PS3 is around 50% only. I am using latest Linksys firmware. My ps3 is located around 25 feet away one floor down from my wireless router. But there is no major wall inbeween the connection. My WRT300N should be a cutting edge product for networking. How come I still got 50% signal strength? Besides moving the router or pS3 closed to each other.
View 5 Replies
View Related
Aug 15, 2011
I I use a Linksys E3000 router. Sometimes when I look at the network map I see a device called "Unknown." It appears as though the two notebooks sometime are going through this device to access the Linksys E3000. (I've checked when both notebooks are on and I can determine what devices are connecting directly to the router and what devices are going through this unknown device.) Is there any way to determine what this unknown device is?
View 5 Replies
View Related
Jun 21, 2011
I had been using my printer through my linksys router with no problem until I added a password to the linksys. Now I can't print. My computer says it can't "ping" the printer.
View 1 Replies
View Related
May 13, 2011
I am currently at a friends house attempting to fix a situation he is having with his' wireless router, it is a Linksys WRT150n.Connection to the internet is possible via ethernet connectivity, however wireless is another story, devices can see the network but cannot connect to it, i have disabled the security key from the network to see if it was a simple password incorrection but still no dice.The current basic wireless settings have network mode set to mixed, and radio band, wide and standard channels set to auto, all other settings in the advanced tab are set to their default values.
View 1 Replies
View Related
Feb 21, 2012
I want to add some wifi to our small office. I have a WRT54GX4 wireless router. I would like to have it be part of our 192.168.0.0 network. I manually changed the address of the WRT54GX4 to 192.168.0.50 (an open address) and gave it a range of 25 addresses 192.168.0.51-192.168.0.75. I changed the SSID from "linksys" to something different. I added a WPA2 Personal code. I also changed the admin password from "admin". I did all of this on a laptop connected to the router with an ethernet cable into port 1 on the router with wifi "off" on the laptop. I disconnected this and plugged one end of the ethernet cable into an open port on a switch in our rack and moved the other end from port 1 to the internet port on the router. I connected to the router wirelessly with my iPad. I was able to connect to the router and log into the router but I'm not getting any internet connection.
View 2 Replies
View Related
Apr 1, 2012
I managed to connect my USB printer (and tested ok) through the E3200 router using the Cisco Connect programme on Windows 7. I note that there was an option for a USB Printer connection in the set-up screen.
When I tried it on the Mac using Mac OSX 10.7.3 and Cisco Connect Ver 1.4, I noted that there was no option for a USB Printer connection.
View 3 Replies
View Related
Dec 1, 2011
I'm having an issue where essentially my only course of action is to unplug the router and plug it back in. I can connect my laptop (Dell Inspiron N4010) and my phone (HTC Inspire) once. But then if I put my computer to sleep, or I take my phone out of the wireless range and come back, I cannot connect again. I've gone through and played with the settings (changing the upnp, the beacon intervals, the channel, etc) but to no avail. Invariably, I always have to come back to unplugging and plugging back in.
Also have a Kobo E-Reader and a wireless Canon printer. The whole point of a wireless printer was so that it would stay connected and I can print from my laptop. This router is making this useless.
View 4 Replies
View Related
Aug 8, 2011
My Linksys WRT160N wireless router stopped working all of the sudden. When I connect to the internet wirelessly my laptops say I have full signal but "No Internet Access." None of the 4 wired ports on the back of the WRT160N router give me wired internet. The only way I can get internet is to connect the wire to my internet modem
View 5 Replies
View Related
Sep 12, 2011
I want to setup a hardwired connection between my Linksys E3000 router and a DIRECTV DVR. I have the most recent firmware on my router. I have checked the ethernet cable and it is good. The lights on the ethernet port on the DVR light up when I have the DRV and router connecter. The DVR gives me an error message when I try to connect. Some other posts have suggest setting a static IP on the DIRECTV DVR using the following settings:
IP Address : 192.168.1.10
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 192.168.1.1
I tried this and still get an error message so I am going to call DIRECTV. Before I do call I would like to know if these are the correct settings for a Static IP?
View 7 Replies
View Related
Dec 15, 2011
Is it possible to connect my WAP54G to my new E2500 router?I previously had a WRT54G and had my WAP54G connected to it in AP Client mode. This enabled me to have internet access on my desktop computer that is located in another room downstairs.I would like to configure my WAP54G to work with my new E2500 router in the same way.
View 2 Replies
View Related
May 13, 2012
I would rather have wireless to wireless . Like I said I have a new EA4500 trying to extended my wireless connection to my back yard still having the same trouble of small to no signal, I have a Belkin N+ Ver.2 that I had been using with the same trouble. I would like to connect the belkin N+ to the EA4500 to extend my wi-fi to my back yard and back half of my house.
View 7 Replies
View Related
Dec 25, 2009
the kids received an iTouch for Christmas and I've spent the last 3 hours trying to get them connected to our home network. I have an existing network with two computers, I'm using a WRT120N router, the iTouch is picking up the network but when we put the password in we get an "unable to join network" message.
View 3 Replies
View Related
Jun 6, 2012
We are running our internal network on the 192.168.1.x range.
We have just installed a new control system which is running on a closed 192.168.0.x network (no internet access).
What we need to do is use the WRT54G to connect the 2 networks together so that we can VNC into one of the computers on the control system network so that it can be managed.
I have tried connecting the two networks by plugging the 192.168.0.x network into the WAN/Internet Port on the WRT54G, and setting the "Internet Connection Type" to "Static IP" and setting the "Internet IP Address :" as 192.168.1.200 (the main PC I need to VNC into) but cannot ping any of the other computers..
View 7 Replies
View Related
Aug 23, 2011
why I am only able to connect at 39Mbps (often 5.5Mbps) to my Linksys E1000 Router? Residential. Wood Frame/Stick home construction. No other devices connected to router. <10 feet from E1000 Router. Line of sight (nothing in between router/laptop). New Dell Inspiron DW 1501 Wireless-N WLAN Half-Mini Card.
E1000 Network Mode: Mixed
Channel Width: Auto (20MHz or 40MHz)
Firmware: 2.0.01 build 08
At times I have seen it flash to 52Mbps but immediately drops to 39Mbps or lower (26, 5.5, etc.).Sales prop indicates up to 300Mbps. Where is the other 90% of the connection speed they’re talking about? OR is 39Mbps expected?
View 1 Replies
View Related
Dec 22, 2011
I recently installed a refurbished E2500 router. The reported speeds I got when hovering over the icon in the system tray ranged from 54 Mbps down to 1.0 Mbps. Also, it would drop, then reestablish, the connection several times per day.I contacted Tech Support via Live Chat, and got a woman who told me it was due to the fact that I'm using the router with an older system that has a wireless-G card (I'll be getting a new system soon).Of course, I thought that was ridiculous, so I called Linksys Tech Support and got a young man who had me reinstall the firmware upgrade (which I had already done when I installed the router). After that, it was good for about 24 hours, then the problems manifested again.I returned the router and ordered a replacement, also refrubished. Again, I upgraded the firmware upon installation. .
View 4 Replies
View Related
Mar 26, 2012
I have an E2000 (2 yrs old) that is not connecting to the internet.It is a slave to a BEFSR81 which controls the DNS.I am able to connect to other computers on my home network, so I know the wirelss is working and the cables are all good. I know that I can plug my laptop into the port on the hard wire router that the wireless was plugged into and I can get internet. So the only thing I can think of is the inernet is being blocked at the E2000.
View 1 Replies
View Related
Apr 29, 2008
I have a WRT54G wireless router ... I want to connect a new laptop through it ... but I need either a network key or a password ... cant locate these ..
View 8 Replies
View Related
Nov 19, 2012
My WRT54GL Linksys modem has me stumped, it will not connect no matter what I try. it worked fine until just recently after a power outage; everything seems to be working perfectly fine hardware wise; the router shows a solid power led and network activity on WLAN, Ethernet, and Internet. I've tried soft resets and factory reset, clearing my caches, releasing/renewing IPCONFIG.
The peculiar part is that it is not letting me access the web config at 192.168.1.1 while connected with the modem, however if I plug the router directly to my PC's ethernet port I can access the config; Itried updating the firmware this way but it didn't solve the problem. I have no more ideas.
Below is the IPCONFIG information with the modem and router hooked up:
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller #2
Physical Address. . . . . . . . . : 00-04-4B-17-C2-1A
[Code].....
View 2 Replies
View Related
May 8, 2012
It constantly disconnecting and wouldn't stay connected for a long period of time, so I tried messing with the settings and it no longer connects to the internet. It tells me that the settings for this router is not compatible for the computer settings. I have reset the router to its factory settings, restarted the computer, restarted the router but nothing changed. I have tried plugging my computer to the router via ethernet cord and typing in 192.168.1.1 in the address field of Internet explorer and nothing comes up. I also forgot the password to the router!
View 1 Replies
View Related
