When I connect router correctly via modem I get message not connected no matter what I do I am convinced I am doing nothing wrong having used linksys router a number of times before about 2 years ago using XP cannot. I am now connected to router now to get on internet to this site
View 1 RepliesIs it possible to connect WRT54GC with telnet?
View 3 Replies View Relatedi have a wrt54gc router. I can connect to the interent without no problems what so ever, however, i try and play a game on line and it tells me it cannot connect to the EA server. My psp is running v3.03. and the router 1.001
View 3 Replies View RelatedWe are trying to connect to Internet with the PSP.We are using the Linksys WRT54GC wireless router.Went to192.168.1.1to access the settings, everything has been set to disable security featuresPSP Version 2.6Followed instrutions from a web site including setting the DNS to 67.171.70.72 on the PSPThere is no WEP, WPA or any other security codes.I just disabled Firewall in the Security ModeSPI Firewall Protection: Block Anonymous Internet Requests:It is our own home network of two computers and any one else who has a wireless card can access.had a signal strength of 100% on the PSP.But, still got message..... A connection error has occurred A connection to the access point could not be established, check the security settings for the network and try again.how to connect to the Internet using the Linksys WRT54GC?
View 9 Replies View Relatedim using linksys broadband router model no WRT54GC firmware version 1.06....im using it since 2005 still now i didn't face any problem, but since 3days im facing a problem all of a sudden. i.e im unable to connect through Ethernet port ( through lan wire) to my PC, but i can access router through wifi.when i connect through wifi it is saying that there is no internet access. but i can access my router administration.i cross checked with another pc and another connecting cable , but same problem, no use i also tried resetting my router, updated my firmware. no use.
View 1 Replies View RelatedI borrowed a linksys wireless broadband router from my uncle and tried to connect it to my pc.But it is not connecting..i mean i connected an ethernet cable to my router to pc and waited for the light on the modem to become stable..and tried to go to ip address 192.168.1.1..the page not opening....it shows THE WEBPAGE NOT AVAILABLE ...but it worked perfectly for my unclE...eventhough i disconnected power cable and tried resetting but it is of no use ROUTER MODEL NO.WRT54GC ver 2.0?
View 1 Replies View RelatedI have a WRT54GC v2.0, that was working perfectly till yesterday.I cannot access the router no more, either thru cable nor wireless, all lights are flashing.I thought it would be the power source but i have measured it with my fluke multimeter and there is 3.5v, it is probably working well.
View 9 Replies View RelatedI put a password on my WRT54GC ver 2.0. After that i couldn't access internet. It keeps authenticating and never connects.
View 2 Replies View RelatedI have just got viasat internet from England to replace the local internet here in Spain. I believe that My router was programmed to the old internet and wont recognize my new modem. I have tried live chat and got guided thru a few things and established an IP conflict, but lost contact before we found a solution.
View 1 Replies View RelatedI've been using WRT54GC for over 3 months, but about two weeks ago I started to experience some strange behavior. About every day connection slows down to a few kbytes/sec (less than dial-up). Ping to comcast.net (my ISP) shows about 50% pings timeouted, 40% pings 50ms and 10% pings about 1 sec. Rebooting router works, but only for a few hours.I replaced the modem with a different model - it didn't work, so it's not the modem. I removed router and connected directly - no slowdown occurs any more, so it's not the computer. I am running latest firmware.
View 7 Replies View RelatedI Have a Linksys WRT54GC router which I use as a switch. Recently I have been able to connect to the wireless connection, but I can't access the router or the internet. Computers that are using it as a switch have no problems, but they are setup with different network details.
I know that wireless is on, I have also tried pressing the reset button and wireless still doesn't work.
Is there any firmware update for this product? I'm not hable to find it... Product: WRT54GC Version 2.0 (wwith external anthena)
View 9 Replies View RelatedI've been using my Linksys WRT54GC for couple years now, and only recently have I started to have significant issues with the device. I'm using a 2012 Macbook Pro, and my internet connection seems to be randomly dropping every now and then. Sometimes it works just fine for couple of hours only dropping once or so, sometimes it starts dropping literally every few seconds. What I usually do is quickly restart my wifi and the connection comes back right away. I also tried not doing that, and the internet connection tends to come back up after a minute or so.
I have read countless topics, also tried many things: changing MTU, the thresholds in router settings, security modes (it seemed to have worked fine after I changed it to WPA, not anymore though. I'm using no password now and it doesn't fix the problem either), changing the channel (my strongest signals around are on channel 1 and 11, thus I left mine on 6), I even reset the router today (held the reset button for 10 seconds~) but it didn't work either. I didn't upgrade the software since I heard stories about the software available on this site being corrupted or something, bricking the router, which is the last thing I'd want (I'm running on 1.00.7 now).
I have the impression (but it's just an impression, it might as well not be the case, and just me trying to find out when it happens, since it's not always that it breaks the connection while doing that) that it breaks the connection on high load, I mean when I'm for example using skype and facebook, and then try to go on reddit at the same time - the reddit webpage won't load, and the connection is lost after few seconds. But it also started dropping every few seconds while I was playing an online game and skyping at the same time today, which isn't a particularly huge problem for a 23Mbps download and 1.5 upload speed internet I suppose, and which it never did before. I have never had such issues with my PC using a Linksys USB adapter. The connection would drop from time to time when, for example, accidentally going on pages with lots of thumbnail pictures, or trying to load 15 tabs of jpgs at the same time, it was never that much of a problem really though, I just thought it's normal.
I'm trying to change my wireless router from WRT54G which been using for more than 5 years to a WRT54GC which I got from my friend. I clone every entry from WRT54G to the new one, even MAC address. Below is what I captured from the old router WRT54G when it connected through PPPoE
Login Type : PPPoE Login Status : Connected IP Address : 114.91.200.128 Subnet Mask : 255.255.255.255 Default Gateway : 124.74.12.242 DNS 1 : 180.168.255.118 DNS 2 : 116.228.111.18 DNS 3 : MTU : 1492 from the web admin interface, I can ping and traceroute yahoo.com, so can I browse any website from my PC.
and here is what I captured from the new router WRT54GC when it connected through PPPoE
Connection Type: PPPoEIP Address: 180.158.83.182Subnet Mask: 255.255.0.0Default Gateway: DNS1: 180.168.255.118DNS2: 116.228.111.18 from the web admin interface, I can ping and traceroute yahoo.com, but I cannot browse any website from my PC.
im triyng to forward a port but when i click save settings it give me a message: "Entry 10: Invalid IP Address".
View 9 Replies View RelatedI have used the WRT54GC (v2.0) router for a few years now, everything worked as smooth as butter, but a few days ago it just stopped detecting the internet connection. Everything works fine with the modem. After resetting the router, I tried to reinstall everything using the setup wizard but at the eleventh step, a pop-up message appears saying that it is "unable to detect the Internet connection" and, like I said previously, the modem works just fine. The username and password for the connection are correct (connection type: PPPoE).
View 4 Replies View RelatedWhen I run the setup CD the router cannot locate the internet connection. I'm using a Motorola Surfboard modem. My local PC works fine on the internet. My remote wireless PC shows limited or no connectivity. I have switched out the Ethernet cables with no luck
View 5 Replies View RelatedI updated the Firmware...then the WRT54GC can't work now,it's power led green and red always,I can't ping 192.168.1.1 via wired or wireless.wireless led shutdown.my laptop can't find any wireless network.
View 9 Replies View Relatedhow to change the time zone, the current time always show Firmware Version:1.01.6Current Time:Sat, 1-Jan-2000 00:08:40 and can't connect PPPOE
View 1 Replies View RelatedMy wireless router is WRT54GC ver2.0. When I plug the power cable, all the LED light blinking including the power LED light. I try to find the firmware in the website, but here only have the version 1.0.
View 9 Replies View RelatedI am currently using a Thomson SpeedTouch ST780WLT router, which is working perfectly.I've got a second router currently not in use, a Linksys WRT54GC, that I want to set up as a simple switch to extend my network by a few ports.I connect the Linksys to my main router using LAN-LAN. Then I set up the linksys to have the IP 10.0.0.139 (my main router's IP is 10.0.0.138) and DNS to 10.0.0.138 etc.I've turned off both DHCP and WLAN on the linksys, to use it as a simple lan switch.
View 2 Replies View RelatedI had a power outage while online and when power resumed, I was no longer able to connect to the internet via my wireless router. My laptops (I have 2, work and personal) both receive the wireless signal from my router (a Linksys WRT54GC) but I get a 'DNS lookup failed' error message when trying to access the internet. My standard set up was Arris cable modem-->Linksys router-->Laptop but I've had to go cable modem-->Laptop via Ethernet in order to access the internet.
Both laptops are running WinXP Pro, SP3 and I ran 'ipconfig/all' on my work one, once when connected via Ethernet and once when I had my wireless connection enabled (but again, not connected to the internet). Results below.
Ipconfig/all when connected via Ethernet to cable modem:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsm03015a>ipconfig/all
[Code].....
Have a Compaq laptop and Gateway desktop computer. Laptop has Windows 7, desktop Windows Vista. Got a new Cisco Linksys wireless router, and trying to figure out how to set this up. Do I use the Linksys CD in the laptop or the desktop? Have DSL. Right now, the Linksys is set up on the desktop, and all is well, but need to get the laptop able to connect to internet through router. Do I need to uninstall Linksys on desktop and install it on laptop?
View 5 Replies View RelatedWindows 7 laptop does not connect to Wiress router WRT160N. It used to connect automatically for years when laptop is booted.Now Windows troubleshooting gives message to reboot wireless router. It connects automatically when the wireless is rebooted. This issue occues when the router is ON for long time ~ 12 hours or more.
View 1 Replies View RelatedI have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
View 9 Replies View RelatedSo, I currently have a desktop and 3 laptops connected wireless to the router in my home, yet the GATEWAY laptop no longer connects wireless. I have to use the wire in order to connect to the internet and it's starting to become annoying. I had to restore the Gateway laptop back to Windows XP from Windows 7 due to a LARGE amount of issues with Windows 7. I'm in need of this laptop in order to complete my paper work.
[code]...
I borrowed a netbook from a friend to take on vacation . It is a Dell Inspiron Mini 1011 running XP SP3 My router is a WRT54GS. I can connect to the router with my Vista laptop with no problems. I can connect to the router with a cat cable using the netbook. The netbook sees a strong signal from my router all the time, but will not connect. Occasionally it will connect for a moment, but then disconnects.
View 6 Replies View RelatedCan i connect xp, vista, & windows 7 on the same wireless router?
View 1 Replies View RelatedI have just installed windows 7 proffessional but i cant connect to a wireless network which i previously connected with windows 7 ultimate from the same laptop
View 1 Replies View RelatedI am not able to connect my HP laptop (Windows Vista) to the internet via a wireless router/high speed internet.My internet service provider confirmed that it is a problem with my HP laptop.I have a Linksys router. My other laptop (Sony) connects fine.I have tried two browsers on my HP laptop to access the internet with no luck.My HP laptop does say that I am connected to the wireless network.
View 9 Replies View RelatedI am using window 8 preview edition. Just purchased the EA4500 router. Do you think it's compatible before I open the package.
View 1 Replies View RelatedI have 2 laptops...a Compaq Presario (wireless b/g) running Win Xp and A Dell Vostro (wireless n) running Win 7 Pro. No problem with the Win XP but the Win 7 refuses to access the internet. It is connected to the E1000 but has limited access. All passcodes are correct...all settings are good. It has connected in the past but once in a while you have to force it to connect. Now it won't access the web, even thought the radio is connected
View 8 Replies View RelatedI am using the wireless router WRT54G2 V1 to configure on windows 7 . How to configure that .... It is working on windows XP
View 1 Replies View Related