Linksys Wireless Router :: Connect WRT54GC With Telnet?

Aug 28, 2012

Is it possible to connect WRT54GC with telnet?

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: Wrt54gc - PSP Cannot Connect To EA Server

Jan 15, 2007

i have a wrt54gc router.  I can connect to the interent without no problems what so ever, however, i try and play a game on line and it tells me it cannot connect to the EA server.  My psp is running v3.03.  and the router 1.001

View 3 Replies View Related

Linksys Wireless Router :: WRT54GC - Can't Connect PSP To Internet

Jul 3, 2006

We are trying to connect to Internet with the PSP.We are using the Linksys WRT54GC wireless router.Went to192.168.1.1to access the settings, everything has been set to disable security featuresPSP Version 2.6Followed instrutions from a web site including setting the DNS to 67.171.70.72 on the PSPThere is no WEP, WPA or any other security codes.I just disabled Firewall in the Security ModeSPI Firewall Protection: Block Anonymous Internet Requests:It is our own home network of two computers and any one else who has a wireless card can access.had a signal strength of 100% on the PSP.But, still got message..... A connection error has occurred A connection to the access point could not be established, check the security settings for the network and try again.how to connect to the Internet using the Linksys WRT54GC?

View 9 Replies View Related

Linksys Wireless Router :: Cannot Connect WRT54gc Using Windows 7

Feb 12, 2012

When I connect router correctly via modem I get message not connected no matter what I do I am convinced I am doing nothing wrong having used linksys router a number of times before about 2 years ago using XP cannot. I am now connected to router now to get on internet to this site

View 1 Replies View Related

Linksys Wireless Router :: WRT54GC / Unable To Connect Through Ethernet Port To PC?

Feb 15, 2012

im using linksys broadband router model no WRT54GC firmware version 1.06....im using it since 2005 still now i didn't face any problem, but since 3days im facing a problem all of a sudden. i.e im unable to connect through Ethernet port ( through lan wire) to my PC, but i can access router through wifi.when i connect through wifi it is saying that there is no internet access. but i can access my router administration.i cross checked with another pc and another connecting cable , but same problem, no use i also tried resetting my router, updated my firmware. no use. 

View 1 Replies View Related

Linksys Wireless Router :: WRT54GC V2.0 Not Connecting To PC

Apr 2, 2012

I borrowed a linksys wireless broadband router from my uncle and tried to connect it to my pc.But it is not connecting..i mean i connected an ethernet cable to my router to pc and waited for the light on the modem to become stable..and tried to go to ip address 192.168.1.1..the page not opening....it shows THE WEBPAGE NOT AVAILABLE ...but it worked perfectly for my unclE...eventhough i disconnected power cable and tried resetting but it is of no use ROUTER MODEL NO.WRT54GC ver 2.0?

View 1 Replies View Related

Linksys Wireless Router :: WRT54GC V2.0 Cannot Be Accessed?

Jul 13, 2009

I have a WRT54GC v2.0, that was working perfectly till yesterday.I cannot access the router no more, either thru cable nor wireless, all lights are flashing.I thought it would be the power source but i have measured it with my fluke multimeter and there is 3.5v, it is probably working well.

View 9 Replies View Related

Linksys Wireless Router :: WRT54GC Ver 2.0 Keeps Authenticating And Never Connects

Feb 18, 2012

I put a password on my WRT54GC ver 2.0. After that i couldn't access internet. It keeps authenticating and never connects.

View 2 Replies View Related

Linksys Wireless Router :: Wrt54gc Ver2 Has An IP Conflict?

Feb 11, 2013

I have just got viasat internet from England to replace the local internet here in Spain. I believe that My router was programmed to the old internet and wont recognize my new modem. I have tried live chat and got guided thru a few things and established an IP conflict, but lost contact before we found a solution.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GC - Every Day Connection Becomes Very Slow

Aug 15, 2006

I've been using WRT54GC for over 3 months, but about two weeks ago I started to experience some strange behavior. About every day connection slows down to a few kbytes/sec (less than dial-up). Ping to comcast.net (my ISP) shows about 50% pings timeouted, 40% pings 50ms and 10% pings about 1 sec. Rebooting router works, but only for a few hours.I replaced the modem with a different model - it didn't work, so it's not the modem. I removed router and connected directly - no slowdown occurs any more, so it's not the computer. I am running latest firmware.

View 7 Replies View Related

Linksys WRT54GC Wireless - Can't Access Router Or Internet

Feb 14, 2012

I Have a Linksys WRT54GC router which I use as a switch. Recently I have been able to connect to the wireless connection, but I can't access the router or the internet. Computers that are using it as a switch have no problems, but they are setup with different network details.

I know that wireless is on, I have also tried pressing the reset button and wireless still doesn't work.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GC Version 2.0 Firmware Update?

Jul 16, 2007

Is there any firmware update for this product? I'm not hable to find it... Product: WRT54GC Version 2.0 (wwith external anthena)

View 9 Replies View Related

Linksys Wireless Router :: WRT54GC Dropping Internet Connection

Jan 25, 2013

I've been using my Linksys WRT54GC for couple years now, and only recently have I started to have significant issues with the device. I'm using a 2012 Macbook Pro, and my internet connection seems to be randomly dropping every now and then. Sometimes it works just fine for couple of hours only dropping once or so, sometimes it starts dropping literally every few seconds. What I usually do is quickly restart my wifi and the connection comes back right away. I also tried not doing that, and the internet connection tends to come back up after a minute or so. 
 
I have read countless topics, also tried many things: changing MTU, the thresholds in router settings, security modes (it seemed to have worked fine after I changed it to WPA, not anymore though. I'm using no password now and it doesn't fix the problem either), changing the channel (my strongest signals around are on channel 1 and 11, thus I left mine on 6), I even reset the router today (held the reset button for 10 seconds~) but it didn't work either. I didn't upgrade the software since I heard stories about the software available on this site being corrupted or something, bricking the router, which is the last thing I'd want (I'm running on 1.00.7 now).
 
I have the impression (but it's just an impression, it might as well not be the case, and just me trying to find out when it happens, since it's not always that it breaks the connection while doing that) that it breaks the connection on high load, I mean when I'm for example using skype and facebook, and then try to go on reddit at the same time - the reddit webpage won't load, and the connection is lost after few seconds. But it also started dropping every few seconds while I was playing an online game and skyping at the same time today, which isn't a particularly huge problem for a 23Mbps download and 1.5 upload speed internet I suppose, and which it never did before. I have never had such issues with my PC using a Linksys USB adapter. The connection would drop from time to time when, for example, accidentally going on pages with lots of thumbnail pictures, or trying to load 15 tabs of jpgs at the same time, it was never that much of a problem really though, I just thought it's normal. 

View 9 Replies View Related

Linksys Wireless Router :: WRT54GC Cannot Get A Valid Gateway Entry

Feb 2, 2012

I'm trying to change my wireless router from WRT54G which been using for more than 5 years to a WRT54GC which I got from my friend. I clone every entry from WRT54G to the new one, even MAC address. Below is what I captured from the old router WRT54G when it connected through PPPoE
 
Login Type :  PPPoE          Login Status :  Connected             IP Address :  114.91.200.128         Subnet Mask :  255.255.255.255        Default Gateway :  124.74.12.242         DNS 1 :  180.168.255.118          DNS 2 :  116.228.111.18          DNS 3 :            MTU :  1492 from the web admin interface, I can ping and traceroute yahoo.com, so can I browse any website from my PC.
 
and here is what I captured from the new router WRT54GC when it connected through PPPoE
 
Connection Type: PPPoEIP Address: 180.158.83.182Subnet Mask: 255.255.0.0Default Gateway: DNS1: 180.168.255.118DNS2: 116.228.111.18 from the web admin interface, I can ping and traceroute yahoo.com,  but I cannot browse any website from my PC.

View 2 Replies View Related

Linksys Wireless Router :: WRT54GC / Entry 10 - Invalid IP Address

Jan 27, 2012

im triyng to forward a port but when i click save settings it give me a message: "Entry 10: Invalid IP Address".

View 9 Replies View Related

Linksys Wireless Router :: Unable To Detect Internet Connection - WRT54GC

Jun 5, 2012

I have used the WRT54GC (v2.0) router for a few years now, everything worked as smooth as butter, but a few days ago it just stopped detecting the internet connection. Everything works fine with the modem. After resetting the router, I tried to reinstall everything using the setup wizard but at the eleventh step, a pop-up message appears saying that it is "unable to detect the Internet connection" and, like I said previously, the modem works just fine. The username and password for the connection are correct (connection type: PPPoE).

View 4 Replies View Related

Linksys Wireless Router :: WRT54GC - When Run Setup CD Cannot Locate Internet Connection

May 6, 2009

When I run the setup CD the router cannot locate the internet connection.  I'm using a Motorola Surfboard modem. My local PC works fine on the internet.  My remote wireless PC shows limited or no connectivity.  I have switched out the Ethernet cables with no luck

View 5 Replies View Related

Linksys Wireless Router :: Wrt54gc Can't Work Or Find Any Wifi Network

Aug 23, 2007

I updated the Firmware...then the WRT54GC can't work now,it's power led green and red always,I can't ping 192.168.1.1 via wired or wireless.wireless led shutdown.my laptop can't find any wireless network.

View 9 Replies View Related

Linksys Wireless Router :: WRT54GC Current Time Always Show 1-Jan-2000 00:08:40?

Jul 27, 2011

how to change the time zone, the current time always show Firmware Version:1.01.6Current Time:Sat, 1-Jan-2000 00:08:40 and can't connect PPPOE

View 1 Replies View Related

Linksys Wireless Router :: WRT54GC Ver2.0 LED Light Blinking Including Power

Apr 22, 2009

My wireless router is WRT54GC ver2.0. When I plug the power cable, all the LED light blinking including the power LED light. I try to find the firmware in the website, but here only have the version 1.0.

View 9 Replies View Related

Use 2nd Router Linksys (WRT54GC) As A Switch?

Apr 12, 2011

I am currently using a Thomson SpeedTouch ST780WLT router, which is working perfectly.I've got a second router currently not in use, a Linksys WRT54GC, that I want to set up as a simple switch to extend my network by a few ports.I connect the Linksys to my main router using LAN-LAN. Then I set up the linksys to have the IP 10.0.0.139 (my main router's IP is 10.0.0.138) and DNS to 10.0.0.138 etc.I've turned off both DHCP and WLAN on the linksys, to use it as a simple lan switch.

View 2 Replies View Related

Protocols / Routing :: WRT54GC - Getting Wireless Signal But Cannot Connect To Internet?

Mar 9, 2013

I had a power outage while online and when power resumed, I was no longer able to connect to the internet via my wireless router. My laptops (I have 2, work and personal) both receive the wireless signal from my router (a Linksys WRT54GC) but I get a 'DNS lookup failed' error message when trying to access the internet. My standard set up was Arris cable modem-->Linksys router-->Laptop but I've had to go cable modem-->Laptop via Ethernet in order to access the internet.

Both laptops are running WinXP Pro, SP3 and I ran 'ipconfig/all' on my work one, once when connected via Ethernet and once when I had my wireless connection enabled (but again, not connected to the internet). Results below.

Ipconfig/all when connected via Ethernet to cable modem:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsm03015a>ipconfig/all

[Code].....

View 19 Replies View Related

Linksys Wireless Router :: Telnet Or Ssh Access On Wrt160nl?

Aug 3, 2012

i have 2 questions regarding wrt160nl.

1.Is it possible to have ssh or telnet access on the router, with the default firmware?

2.Is it possible to disable one of the antennas on the router, while has installed the default firmware?

View 1 Replies View Related

Cisco VPN :: ASR 1002 - Disconnect / Connect WAN Interface / Router Not Reachable Via Telnet?

Aug 13, 2012

We have 400 branches is ended on ASR 1002 router. ASR 1002 is the Hub router. When we disconnect/connect WAN interface  or Shut/no shut tunnel interface, at the moment, router is not reacheable via telnet. 

But if i disable the EIGRP on tunnel interface, tunnel are ok, then when i enable eigrp on tunnel interface, all eigrp neighbourhoods are OK.Is there any way to limit NHRP or EIGRP packets ?

View 1 Replies View Related

Cisco WAN :: Linksys E1000 - Telnet To Private IP Through Soho Router?

Sep 22, 2011

My Setup / I've been lurking on here a while, working hard to understand the basic networking concepts and eventually pursue the CISCO certs. I bought a lab and have since managed to setup a four router config (2610XM-DTE, 2621-DTE, 2501-DCE, and a linksys E1000 with routing, DHCP, and NAT turned off to make it a wirelss access point) with three switches (2@2950 and a 2924XL).
 
So far, I have managed to bring in my public IP using DHCP, and setup PAT. The network is fully functional, I can ping every interface, and reach the web on host PCs from any switchport. I am also able to telnet into the FastEthernet interface IPd with my public address.
 
My Issue : My concern right now is in feature support. I recently read on here that CISCO does not support UPnP, and due to my limited resources, I am using the only public IP I have to allow remote testing/learning on my lab. The issue is that I also have a PS3 and XBox 360 on this network that is requiring UPnP for certain online games and features.
 
The only solution I can see to this problem is to return my public IP back to the E1000 router, which is running RIP Version 2 (white papers said version 1, but a debup ip rip showed that updates were being ignored due to illegal version), and then poing my other three routers to it for outside access.
 
The questions I have in this scenario:

1. Will NAT still function if I use the E1000 and set the interfaces connecting to it as ip nat inside? I'm assuming that PAT is already hardcoded onto the router to allow for multiple connections to public IP space.
 
2. If my IP is 68.X.X.X, I set the E1000 to an IP of 192.168.1.1 and the FastEthernet it connects to is on my 2621 with an IP of 192.168.1.2, would it be possible to telnet into 192.168.1.2? If I were to forward port 23 out of the E1000 to the 192.168.1.2 address. Will my login and password for line vty 0 4 understand the request if the original telnet was to my public IP?
 
3. If all of that is just non-sense, is there another work-around that allows me to acheive UPnP through my E1000, while retaining telnet ability to my lab so I can try things in different scenarios or while I'm away from home?

View 5 Replies View Related

Linksys Cable / DSL :: Anyway To Enable Telnet Access On WAG120n Modem / Router

Jul 18, 2011

I'm trying to find out if there is anyway to enable telnet access on the WAG120n modem/router .I can't seem to be able to find related info in the support web site for this device. Any info if telnet is even available ?

View 2 Replies View Related

Servers :: Cannot Connect To Any Mailbox Using Telnet

Feb 18, 2011

i am using open suse 11.3 as OS.. when i try to connect to any mail server over smtp using telnet, their is either a connection time out or server not found error msg..

View 16 Replies View Related

Cisco Firewall :: Cannot Use SSH / TELNET / TFTP To Connect ASA5520

Aug 12, 2012

I have a question about my ASA 5520, it worked well till two weeks ago, and suddenly cannot be accessed by SSH/Telnet/TFTP....only can use the Consoel port to access it now, but other VPN/ACL setting working well. [code] If I enabled the outside access for SSH like below, it works well for outside port.ssh 0.0.0.0 0.0.0.0 outside.

View 3 Replies View Related

Cisco Switching/Routing :: Can't Connect On WS-C2950G-48-E Switch With Telnet Or HTTP

Feb 9, 2012

I can't to connect on my switch (WS-C2950G-48-EI) with Telnet or HTTP.When to connect with console, i have a error [code]

View 4 Replies View Related

Linksys Wireless Router :: Cannot Connect Computer To Cisco Connect - EA3500

Jul 29, 2012

Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.

View 8 Replies View Related

Linksys Wireless Router :: E1500 - Can't Connect To Cisco Connect

Feb 24, 2013

I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
 
I've tried changing the Ethernet cables

View 1 Replies View Related

Cisco WAN :: 877 Router Unable To Telnet From Outside?

Sep 3, 2012

I am facing an issue with a cisco 877 router. I am not able to telnet to this router from outside using the public IP. I have also notices this works when the Nat is removed.

View 7 Replies View Related

Linksys Wireless Router :: Can't Connect To 192.168.1.1 Or Cisco Connect

Feb 25, 2011

I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved