I Have a Linksys WRT54GC router which I use as a switch. Recently I have been able to connect to the wireless connection, but I can't access the router or the internet. Computers that are using it as a switch have no problems, but they are setup with different network details.
I know that wireless is on, I have also tried pressing the reset button and wireless still doesn't work.
We are trying to connect to Internet with the PSP.We are using the Linksys WRT54GC wireless router.Went to192.168.1.1to access the settings, everything has been set to disable security featuresPSP Version 2.6Followed instrutions from a web site including setting the DNS to 67.171.70.72 on the PSPThere is no WEP, WPA or any other security codes.I just disabled Firewall in the Security ModeSPI Firewall Protection: Block Anonymous Internet Requests:It is our own home network of two computers and any one else who has a wireless card can access.had a signal strength of 100% on the PSP.But, still got message..... A connection error has occurred A connection to the access point could not be established, check the security settings for the network and try again.how to connect to the Internet using the Linksys WRT54GC?
View 9 Replies View RelatedI've been using my Linksys WRT54GC for couple years now, and only recently have I started to have significant issues with the device. I'm using a 2012 Macbook Pro, and my internet connection seems to be randomly dropping every now and then. Sometimes it works just fine for couple of hours only dropping once or so, sometimes it starts dropping literally every few seconds. What I usually do is quickly restart my wifi and the connection comes back right away. I also tried not doing that, and the internet connection tends to come back up after a minute or so.
I have read countless topics, also tried many things: changing MTU, the thresholds in router settings, security modes (it seemed to have worked fine after I changed it to WPA, not anymore though. I'm using no password now and it doesn't fix the problem either), changing the channel (my strongest signals around are on channel 1 and 11, thus I left mine on 6), I even reset the router today (held the reset button for 10 seconds~) but it didn't work either. I didn't upgrade the software since I heard stories about the software available on this site being corrupted or something, bricking the router, which is the last thing I'd want (I'm running on 1.00.7 now).
I have the impression (but it's just an impression, it might as well not be the case, and just me trying to find out when it happens, since it's not always that it breaks the connection while doing that) that it breaks the connection on high load, I mean when I'm for example using skype and facebook, and then try to go on reddit at the same time - the reddit webpage won't load, and the connection is lost after few seconds. But it also started dropping every few seconds while I was playing an online game and skyping at the same time today, which isn't a particularly huge problem for a 23Mbps download and 1.5 upload speed internet I suppose, and which it never did before. I have never had such issues with my PC using a Linksys USB adapter. The connection would drop from time to time when, for example, accidentally going on pages with lots of thumbnail pictures, or trying to load 15 tabs of jpgs at the same time, it was never that much of a problem really though, I just thought it's normal.
I have used the WRT54GC (v2.0) router for a few years now, everything worked as smooth as butter, but a few days ago it just stopped detecting the internet connection. Everything works fine with the modem. After resetting the router, I tried to reinstall everything using the setup wizard but at the eleventh step, a pop-up message appears saying that it is "unable to detect the Internet connection" and, like I said previously, the modem works just fine. The username and password for the connection are correct (connection type: PPPoE).
View 4 Replies View RelatedWhen I run the setup CD the router cannot locate the internet connection. I'm using a Motorola Surfboard modem. My local PC works fine on the internet. My remote wireless PC shows limited or no connectivity. I have switched out the Ethernet cables with no luck
View 5 Replies View RelatedI borrowed a linksys wireless broadband router from my uncle and tried to connect it to my pc.But it is not connecting..i mean i connected an ethernet cable to my router to pc and waited for the light on the modem to become stable..and tried to go to ip address 192.168.1.1..the page not opening....it shows THE WEBPAGE NOT AVAILABLE ...but it worked perfectly for my unclE...eventhough i disconnected power cable and tried resetting but it is of no use ROUTER MODEL NO.WRT54GC ver 2.0?
View 1 Replies View RelatedI have a WRT54GC v2.0, that was working perfectly till yesterday.I cannot access the router no more, either thru cable nor wireless, all lights are flashing.I thought it would be the power source but i have measured it with my fluke multimeter and there is 3.5v, it is probably working well.
View 9 Replies View RelatedI put a password on my WRT54GC ver 2.0. After that i couldn't access internet. It keeps authenticating and never connects.
View 2 Replies View RelatedI have just got viasat internet from England to replace the local internet here in Spain. I believe that My router was programmed to the old internet and wont recognize my new modem. I have tried live chat and got guided thru a few things and established an IP conflict, but lost contact before we found a solution.
View 1 Replies View RelatedIs it possible to connect WRT54GC with telnet?
View 3 Replies View Relatedi have a wrt54gc router. I can connect to the interent without no problems what so ever, however, i try and play a game on line and it tells me it cannot connect to the EA server. My psp is running v3.03. and the router 1.001
View 3 Replies View RelatedI've been using WRT54GC for over 3 months, but about two weeks ago I started to experience some strange behavior. About every day connection slows down to a few kbytes/sec (less than dial-up). Ping to comcast.net (my ISP) shows about 50% pings timeouted, 40% pings 50ms and 10% pings about 1 sec. Rebooting router works, but only for a few hours.I replaced the modem with a different model - it didn't work, so it's not the modem. I removed router and connected directly - no slowdown occurs any more, so it's not the computer. I am running latest firmware.
View 7 Replies View RelatedWhen I connect router correctly via modem I get message not connected no matter what I do I am convinced I am doing nothing wrong having used linksys router a number of times before about 2 years ago using XP cannot. I am now connected to router now to get on internet to this site
View 1 Replies View RelatedIs there any firmware update for this product? I'm not hable to find it... Product: WRT54GC Version 2.0 (wwith external anthena)
View 9 Replies View RelatedI'm trying to change my wireless router from WRT54G which been using for more than 5 years to a WRT54GC which I got from my friend. I clone every entry from WRT54G to the new one, even MAC address. Below is what I captured from the old router WRT54G when it connected through PPPoE
Login Type : PPPoE Login Status : Connected IP Address : 114.91.200.128 Subnet Mask : 255.255.255.255 Default Gateway : 124.74.12.242 DNS 1 : 180.168.255.118 DNS 2 : 116.228.111.18 DNS 3 : MTU : 1492 from the web admin interface, I can ping and traceroute yahoo.com, so can I browse any website from my PC.
and here is what I captured from the new router WRT54GC when it connected through PPPoE
Connection Type: PPPoEIP Address: 180.158.83.182Subnet Mask: 255.255.0.0Default Gateway: DNS1: 180.168.255.118DNS2: 116.228.111.18 from the web admin interface, I can ping and traceroute yahoo.com, but I cannot browse any website from my PC.
im triyng to forward a port but when i click save settings it give me a message: "Entry 10: Invalid IP Address".
View 9 Replies View RelatedI updated the Firmware...then the WRT54GC can't work now,it's power led green and red always,I can't ping 192.168.1.1 via wired or wireless.wireless led shutdown.my laptop can't find any wireless network.
View 9 Replies View Relatedhow to change the time zone, the current time always show Firmware Version:1.01.6Current Time:Sat, 1-Jan-2000 00:08:40 and can't connect PPPOE
View 1 Replies View Relatedim using linksys broadband router model no WRT54GC firmware version 1.06....im using it since 2005 still now i didn't face any problem, but since 3days im facing a problem all of a sudden. i.e im unable to connect through Ethernet port ( through lan wire) to my PC, but i can access router through wifi.when i connect through wifi it is saying that there is no internet access. but i can access my router administration.i cross checked with another pc and another connecting cable , but same problem, no use i also tried resetting my router, updated my firmware. no use.
View 1 Replies View RelatedMy wireless router is WRT54GC ver2.0. When I plug the power cable, all the LED light blinking including the power LED light. I try to find the firmware in the website, but here only have the version 1.0.
View 9 Replies View RelatedI am currently using a Thomson SpeedTouch ST780WLT router, which is working perfectly.I've got a second router currently not in use, a Linksys WRT54GC, that I want to set up as a simple switch to extend my network by a few ports.I connect the Linksys to my main router using LAN-LAN. Then I set up the linksys to have the IP 10.0.0.139 (my main router's IP is 10.0.0.138) and DNS to 10.0.0.138 etc.I've turned off both DHCP and WLAN on the linksys, to use it as a simple lan switch.
View 2 Replies View RelatedI had a power outage while online and when power resumed, I was no longer able to connect to the internet via my wireless router. My laptops (I have 2, work and personal) both receive the wireless signal from my router (a Linksys WRT54GC) but I get a 'DNS lookup failed' error message when trying to access the internet. My standard set up was Arris cable modem-->Linksys router-->Laptop but I've had to go cable modem-->Laptop via Ethernet in order to access the internet.
Both laptops are running WinXP Pro, SP3 and I ran 'ipconfig/all' on my work one, once when connected via Ethernet and once when I had my wireless connection enabled (but again, not connected to the internet). Results below.
Ipconfig/all when connected via Ethernet to cable modem:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsm03015a>ipconfig/all
[Code].....
I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).
View 9 Replies View RelatedLinksys Wireless router connected but no access to the internet. I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wireless but it only works if I also enable the primary ISP connection on my computer so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off.I have a Slovenian ISP -Amis, cable connection and Belkin Wireless modem, Avira Free antivirus.
View 3 Replies View RelatedI've had a problem about the wireless router. I can easily connect to it, but the problem is it doesn't have an internet access even if I reconnect it to the ADSL Modem/Router. I can have access through the internet with the ADSL Modem/Router directly connected to my Aspire one laptop.
Wireless Router:W-G LINKSYS WRT54 ADSL Modem/ROUTER:PROLiNK ADSL2+ Modem/Router
Linksys Wireless router connected but no access to the internet?
View 19 Replies View RelatedI have a Linksys E2000.
It worked fine until one day, without any change at all, it simply stoped working. I mean, I can still connect through my wifi laptop connection (it shows connected to my router and says that I have an excelent signal). But, I can't reach the internet. But, If I unplug the internet cable, and plug it in my laptop, the connection works fine. A friend told me that this could be caused intentionally by the internet provider, that they would block my signal to avoid me using a wireless router, trying to force consumers to sign their own wireless service. Thus, by this friend advice, I've cloned my laptop's MAC address to the router. It didn't work either.
I recently purchased an EA2700 to replace an old Belkin. I ran the set up CD and I am unable to establish an internet connection. I am able to connect to the router (both wired and wireless), ccess the settings, etc but cant reach the net. I've tried turning off the firewall, flushing the DNS, disabledthe IPv6. Did all the basic steps, resett the modem/router, etc...nothing. i hook the Belkin up and it connects just fine
View 9 Replies View RelatedI've been having internet connection problems for the last few days and i usually do just unplugging the router and modem and turning it them back on but that hasnt been doing the job this time, its still connecting but it just says no internet access but it will connect when i connect my laptop to the modem. My router is linksys wrt54gs version 6.
View 6 Replies View RelatedI have my main router, a E4200v2 which I use as a router and it provides wireless signal throughout my house, however reception is not as strong on the upper floor and there is a slight dead spot, so I purchased an E4200 for the uppermost floor.I set the E4200 to bridge mode so it will act solely as an AP.However connecting the two routers LAN to LAN and the AP does not access the internet.Setting a static IP for the router, instead of acquiring one via DHCP causes me to not be able to access the admin page on the AP.
Connecting WAN on the E4200 to the LAN on the v2 does not work either.My goal here is to have my main router on 192.168.1.1 and the AP on 192.168.1.2 where I can access the admin settings for both routers in case I need to make changes.
While trying to add my kindle fire (unsuccessfully) I lost all internet connections, now my laptop won't connect. I reset the router and and can see my wi-fi account but when I try to use on my PC and laptop it won't recognize it.
View 3 Replies View RelatedI have E1200 router and a Motorola cable modem. I can access the router and internet with a wired connection but when I unplug the ethernet cable I no longer have internet access. I can connect to the router. I have another computer and xbox that are running wireless with full internet access.no problem.
View 3 Replies View Relatedwrt54g wireless router so we could get Netflix through our Wii. I have a one year old Compaq and am running Windows 7 with a wireless Internet connection through my service provider. I installed the router with no problems and was able to get online with the Wii. However, I am no longer able to get Internet access on my desktop. It shows that my Internet is connected, but it shows "No Network Access". I had gotten on fine at first, then I went to the 192.168.1.1 site to configure my data. I changed my time zone and then went to secure my connection. I cannot remember the exact option I chose, but I think it was something like WAP2 Personal. As soon as I selected that the screen froze and I can no longer access that site or get online through the router.
View 3 Replies View Related