Linksys Wireless Router :: E3000 Does Not Have IPv6 Support
Feb 23, 2011I know that the E3000 does not have IPv6 support. I wanted to know if it will get a firmware update to support it?
View 9 Replies
ADVERTISEMENT
Linksys Wireless Router :: Firmware Upgrade For WRT120N To Support IPV6?
Jul 22, 2010IPV4 IP addresses will be running out in less than a year and I wanted to know, will there be a firmware update for WRT120N to support IPV6?
Also, if I have to buy another router to support IPV6, I'm going to buy a D-Link. It's nothing personal, I just find it absolutely idiotic that a router that supports wireless-N doesn't support IPV6. You have to ask your self, how does the standard IPV6 spec thats a few years old not make it to the final product of a router, but a non-standard wireless-N spec implementation somehow got the O.K....?
Linksys Wireless Router :: EA3500 Ethernet Ports Do Not Support Ipv6?
May 29, 2012Region : Ireland
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :
I have my router updated with the latest firmware and I'm pretty sure all the settings are correct but I'm only getting a max transfer rate of 144Mbps. I know this because I use InSSIDer 3 to analyse my wifi network etc. I stream movies over my network and while DVD quality movies play fine, HD movies tend to freeze and buffer a lot. I have the router's channel width set to 40Mhz, so I know that's not the problem. Strangely, I also use a Netgear wifi extender with the MR3420 and it's max rate is 300Mbps.
Linksys Wireless Router :: Does The E3000 Support 5GHz Channels
Jul 23, 2011I have read various forum postings saying to get the best performance from a wifi router you have to use channel 149 or greater and that 36-48 have a weaker signal strength and thus less range/speed.I live in New Zealand and when I select the wireless channel drop list for the 5GHz band it only lists 5 options - Auto (dfs), 36, 40, 44 and 48. I have read forum posts of people stating you should switch to 149 or greater and I have seen screenshots showing the drop list with 149 selected. But I don't have that option.If I check the Status > Wireless page it shows that channel 36 is being used (for Auto).Am I doing something wrong? Do E3000's in this part of the world not support 149 etc?I spoke in a live chat to a support rep who told me that all E3000's are the same everywhere in the world and there was little to no difference in firmware between them. I was also told that channels 36-48 are high gain channels and so there is no need for the other channels, which contradicts other articles I have read which state 36-48 are weaker channels.
View 2 Replies View RelatedLinksys Wireless Router :: E3000 Support File And Print Sharing?
Jan 22, 2011I recently bought an E3000 to replace my failed WRT54G v5. With the E3000 I can't get my shared Windows folders to be accessed from my other PCs. I called telephone support and they informed me that the E3000 doesn't support file & printer sharing. WTH? Is this true? If so, I'm going to return the E3000 and get my money back. But I never heard of a router not supporting file & printer sharing. My WRT54G handled it just fine.
View 8 Replies View RelatedLinksys Wireless Router :: Album Art Support For UPNP Media Server In E3000?
Feb 19, 2012Is there support for album art or video thumbnails in the UPNP media server on the E3000? I've tried adding jpg files with the same name as the video file, but I see nothing in the client. I've also tried naming them 'folder.jpg' and 'cover.jpg' but still get nothing. If this isn't supported is there any plan to add support in the future?
View 2 Replies View RelatedLinksys Cable / DSL :: Does WAG120N Support IPv6
Dec 16, 2011Does WAG120N Support IPv6 ?
View 1 Replies View RelatedLinksys Cable / DSL :: IPv6 Support For WAG320N?
Jul 7, 2011Would like to see IPv6 support on the WAG320N. Some ISPs now support this protocol....should eventually become a standard feature.
View 1 Replies View RelatedLinksys Cable / DSL :: Does WAG160Nv2 Support IPv6 Addresses Primarily For Gateway IP
Feb 3, 2011Does WAG160Nv2 support IPv6 addresses primarily for the Gateway's IP and thereafter about all IPs that need to be entered via the web interface?
View 9 Replies View RelatedCisco Wireless :: IPv6 Support On WLC - 2504?
Aug 28, 2012I would like to get it clarified, that Cisco WLC 2504 running the code ( 7.2.110.0 ) does support IPv6 or not ?
From Cisco Documents they are asking to enable IPv6 support under WLAN > Edit Page, and Enabling mulicast on Ethernet Multicast Mode under Controller > General.
But from the GUI am not able to find the above two field, Even in Interface i created under Controller > interface is not accepting IPv6 address. I am able to configure IPv6 ACL .
Is any deployment document is available to show different scenarios with configuration.
Note - Am using Access point AIR-LAP1262N-N-k9
Cisco Wireless :: Aironet 1100 / 1120 / 1130 Support For IPv6?
May 27, 2012I find much document, but not found information about whether those support for IPv6 e.g. dual-stack like newer series.
View 3 Replies View RelatedCisco :: IPv6 Netflow Support On PI1.2?
Jan 9, 2013i just came to know Assurance feature license doesn't come for free when upgrading from LMS4.2 or NCS1.1. It has to be purchased. Before buying this license, i would like to know if IPv6 netflow is supported.
View 0 Replies View RelatedCisco VPN :: IPv6 Support On ASA 8.4 IPSEC
May 7, 2011I need to implement IPv6 for ASA VPN. According to the ASA_8.4_cli_cfg.pdf , IPv6 is not supported on ASA IPSEC vpn and remote client vpn. I do not have a ASA 8.4, any way to verify on ASA8.4 whether the crypto command support ipv6 address ? If the crypto command do support ipv6 address then probably there is chance it will work.what i mean is eg. crypto map xxx set peer <ipv6 address| ipv4 addres> able to set ipv6 address.
View 4 Replies View RelatedCisco :: Does LMS V3.2 Support IPV6 In All Modules
May 1, 2013Does cisco LMS v3.2 Support IPV6 in all modules ? We will be migrating from V4 to V6 in some time from now
View 1 Replies View RelatedCisco WAN :: IPv6 Support On ASR 9000
Jun 10, 2013According to the url below, i could find that there is a separate module required for asr 9k, is it so; doesnt it sufficient to have the 4.3.0 Ios-xr version for the cgnat supoort features of nat 44, nat64, ds-lite.. like things?URL
View 1 Replies View RelatedLinksys Wireless Router :: Get IPV6 Connectivity Using Rr?
Mar 1, 2013How can I get IPV6 connectivity using rr. Does it has to be automatic or manual, Is there anyone with RR getting IPV6?
View 4 Replies View RelatedCisco Routers :: Getting IPv6 Support For RV082
Jan 27, 2010Is there any IPv6 support planned or in the works for RV082?
View 3 Replies View RelatedCisco Firewall :: Does ASA 5580 Support NAT-PT For IPv6
Mar 29, 2011I want to ask that does ASA 5580 support the nat-pt for IPv6?
View 2 Replies View RelatedDell :: DW5800 4G LTE Card Does Not Support IPv6
Sep 1, 2011I purchased a Latitude E6220 with a 4G WWAN modem (the DW5800). My intention was to support DirectAccess, i.e. Microsoft's clientless VPN, but unfortunately I have not found any way to get the IPv6 protocol installed on the device.
I've searched Verizon Wireless, Dell and Novatel Wireless forums without any success.
Belkin Routers :: Does F5d8636-4v1 Support Ipv6
Feb 3, 2013was told to allow Ipv6. Does my modem support this?
View 1 Replies View RelatedCisco Infrastructure :: 2851 - IPv6 Support In IOS
May 10, 2011we have a Cisco 2851 router and bought the following IOS::
System image file is "flash:c2800nm-spservicesk9-mz.124-25d.bin"
Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)
I thought this version was supposed to have IPv6 support?
TEST(config)#ipv6 unicast-routing ^% Invalid input detected at '^' marker.
TEST(config)#
which IOS should we buy?
Linksys Wireless Router :: Set IPv6 DNS Server On E4200v1?
Jul 12, 2012I have an e4200 V1 with firmeare V 1.0.04 For my IPv4 configuration I use opendns.com for my DNS provider.When I enable IPv6, I get my ISPs DNS server rather than the one I have configured on the IPv4 page. It works, but it eliminates all filtering and statistics that I am able to do with opendns.com.Open DNS does provide two IPv6 DNS servers, but I don't seem to be able to find where to set them in my e4200. I want it set network wide.Can I set my IPv6 DNS provider anywhere in the e4200v1 with V 1.0.04?
View 3 Replies View RelatedLinksys Wireless Router :: IPv6 Setup For E4200?
Jun 11, 2012Our internet provider has no intention of providing a IPv6 DNS so I have a crippled at best service. We live in an area where our only option is through satellite service, so changing providers in not in the cards, yet.
If I "Disable" the DHCP Sever, the setup menu provides a method for me to force feed up to three Static DNS addresses, all with IPv4 addresses.
There are several locations that provide "free" DNS service, but how does one verify the security of such sites? Does Cisco keep track of the status of this kind of service or am I on my own? Cisco seems to endorse two DDNS services, but for home use, the extra charges seem otherwise unnecessary, and do not yet address the IPv6 question.
The first few that I have investigated that do provide IPv6 service also provide their addresses in IPv6 format. The E4200 menu does not seem to allow me to do that.
Am I going to be forced to live with crippled IPv6? I have already discovered a software product that has failed since changing routers, but works if I take my laptop to a particular WiFi location.
Cisco Routers :: How To Add IPv6 Support Via TunnelBroker To A RV016
Jun 21, 2012how to add IPv6 support via HE's TunnelBroker to an RV016.
View 0 Replies View RelatedCisco Switches :: SOHO97 / 800 - Unable To Support IPv6
Dec 7, 2010I've got older SOHO97 which I want to use as a backup for Cisco 800 but I can not find any information if it actually supports IPv6. Neither the data sheet [URL] nor the Cisco Feature Navigator [URL] suggest it has any IPv6 support at all.
View 1 Replies View RelatedCisco WAN :: 2921 ISR G2 Series BGP IPv6 Support Required
May 24, 2011I was slightly dissapointed with the performance of the "pre-sales" phone number of Cisco in the Netherlands so I am asking it here instead.We decided on using 2 Cisco 2921 routers with 2.5GB ram to use for a MultiHomed connection using BGP. We already have our v4 and v6 space assigned as well as our AS number. The connections should turn up soon.What I could not find out with proper certainty on the Cisco Feature Navigator is if the IP BASE on the Cisco 2921 supports both IPv4 and IPv6 routing combined with BGP. This model uses the Universal IOS licensing which I found slightly confusing. I could not find a simple matrix with the supported commands either.
View 1 Replies View RelatedCisco VPN :: Sami Module On 7600 IPv6 Support
Apr 3, 2013Below is my Topo
DUT------router(7600)------Sami module (slot 9)
I have both ipv4 and Ipv6 config on all the three hops. Between Cisco and Sami module, I have the Ip config on vlan interface 1400(say). Its not on a physical interface obviously, I can ping ipv5 from DUT to Sami IPv4 address. But Ipv6 doesnt work. If I add a sttic route to DUT network on SAMI, show ipv6 route does not show it.
Cisco WAN :: 3500 - How To Check Switches Support IPV6 In LAN
Feb 6, 2013i want ti migrade lan from ipv4 to ipv6.. how can i check my switch support ipv6?
i am having cisco 3500 and d-link managed and unmanaged switchs.
Linksys Wireless Router :: Disable IPv6 For Parental Controls?
Jan 14, 2013So I've realized that my parental controls were being ignored by the computers, at first I figured my son had found a work around to by-pass. But reading through the forums today, I've found that IPv6 being enabled might be the cause of my issue. So I'm currently sitting at work and connected to my router remotely, but for the life of me, can't see where to disable this option. Using the Smart Wi-Fi interface, closest I can get is "Connectivity, Internet Settings, IPv6 but everything is grayed out and no option to edit this.
View 9 Replies View RelatedLinksys Wireless Router :: EA4500 - Computer Would Not Get Valid IPv6 On LAN
Apr 18, 2013Lets get this straight, right off! If I plugged my computer directly to my Comcast Modem, IPv6 works fine on the { url } So I do not think any of this problem is related to my computer
I bought a EA4500 Router so I would be ready for IPv6, and also wanted N as well as the storage USB port. When I got the router, it came I guess with the original release firmware. It looked "Classic", but the box said Smart. I did the firmware upgrade. I could not get a IPv6 from Comcast. IPv4 worked fine.
I then changed to the latest "Classic: firmware, and all started to work. So I decided to try Smart again. Same thing, no IPv6 from Comcast. After being on chat for I think close to 2 hours today and getting no where, I did a reset to start at scratch again. I then got a IPv6 from Comcast. Many moons ago, it was a real hassle to switch devices hooked to a cable modem. At least here you had to power cycle the modem, so I have always cloned my wired Desktop MAC. So when I put it back in, I lost IPv6 from Comcast. Turned off MAC cloning, and I got the IPv6 again. So it looks like there is a bug in the Smart Firmware and MAC cloning since it worked OK with Classic firmware. OK, I could live with no cloning since the issues of yesteryear don't seem to be there in getting a IP from the cable modem.
Then for what ever reason, my computer would not get a valid IPv6 on the LAN from the router. I got some IP, but no Gateway. I tried everything I could think off. And again, plugging the computer directly to the cable modem, IPv6 worked fine. So something is just not right with this router as far as I am concerned.
Also, it seems like navigating through the menus on a local connection (192.168.1.1), I constantly got a message to wait popping up on the screen, for many seconds. If I had no Internet connection it would take forever on some things.
I have spent many hours on this, and am just giving up and going to look at another brand product. I don't need or want the "Smart" functions anyway.
Cisco WAN :: Does Nexus 7000 Support Ipv6 6to4 Tunnel
Nov 23, 2011Does Nexus 7000 support ipv6 6to4 tunnel?
View 3 Replies View RelatedCisco Switching/Routing :: 2960 And 4510 IPv6 Support
Mar 2, 2013I have cisco 2960 and Catlyst 4510 switches now we are planning to implement IPV6.
i have the fallowing IOS on my switches.
C2960-lanbasek9-mz.122-50.se5
Cat4500e-entservicesk9-mz.122-54.sg1.bin
The above ios will support for IPV6 or I have to purchase new IOS, which version will support.
Linksys Wireless Router :: EA3500 IPV6 Tunnel Resets To Automatic
Jan 27, 2013I have to go back into settings and deactivate the IPV6 tunnel daily to keep access to youtube. My provider does not support IPV6. Saving changes has no effectIs there a way to ensure that the IPV6 tunnel remains deactivated?I have firmware version 1.0.30 build 126544 2011-12-24. Firmware update function says I got the latest version.
View 5 Replies View Related