Linksys Wireless Router :: Internet Cable Won't Light On EA2700

Aug 24, 2012

I just bought linksys EA2700 to replace my U.S Robotics .. but when i try to connect it like the old router , the internet lights won't turn on, is it because i have to use a modem then use ethernet cable ? can't i just use ADSL cable directly to the router like robotics router ? when i try to configure it manually , i change the internet type to PPoE protocol but i can't find VCI/VPI so where are they ?

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: EA2700 - Blinking Defective Firmware Light Right Out Of Box

Apr 7, 2013

Got the EA2700 router and got the blinking defective firmware light right out of the box

View 3 Replies View Related

Linksys Wireless Router :: EA2700 Not Recognized By Cable Modem?

Feb 24, 2013

I have an EA2700 (fimware "classic" 1.0.14.129982) that used to work perfectly fine with a Comcast cable modem.  I just recently switched to Charter with an Arris TM902 modem and that's where the problems started.  The cable modem will not recognize my router.  I have to plug in a computer into the cable model when it starts up.  Then I need to clone the MAC address and restart the router (after disconnecting the computer).  Why isn't the cable modem recognizing the router when I restart it?  I guess this could work if it would be a one time thing but I had to power-cycle the modem and it stopped recognizing the router even with the cloned MAC address.  So I had to do the whole spiel again.
 
Is there any way to make this work easier?  Should I update my router's firmware to the "smart" one?

View 9 Replies View Related

Linksys Wireless Router :: Internet Light On E3000 Doesn't Light Up?

Jul 22, 2011

 I previously asked if I should be concerned that the Internet light on my Linksys E3000 router doesn't light up when I have Internet access. Well recently I had to do a reset and I noticed that during the reset it does in fact light up, but it doesn't come on when the router is done with the reset!

View 1 Replies View Related

Linksys Wireless Router :: No Internet Access With EA2700?

Apr 24, 2012

I recently purchased an EA2700 to replace an old Belkin. I ran the set up CD and I am unable to establish an internet connection. I am able to connect to the router (both wired and wireless), ccess the settings, etc but cant reach the net. I've tried turning off the firewall, flushing the DNS, disabledthe IPv6. Did all the basic steps, resett the modem/router, etc...nothing. i hook the Belkin up and it connects just fine

View 9 Replies View Related

Linksys Wireless Router :: EA2700 - No Internet Connection?

Mar 19, 2013

Im not able to conect to the internet threw my router, but i am able to with my modem. i dont want to pay for a new one and Cisco wants me to pay $30 for phone support. 

View 9 Replies View Related

Linksys Cable / DSL :: Cisco X3000 No Internet When White Light Is On

Nov 23, 2012

When my X3000 Cisco who works fine when my pc which is connected via the cable port in the adsl modem. (Light is blue)But when the pc is switched off, the light becomes white and no internet connection on our wifi connected devices although we manage to have the connection on the wifi network.

View 9 Replies View Related

Linksys Cable / DSL :: WAG120N No Internet Connection / DSL Light Keeps Blinking

Aug 28, 2012

Yesterday I bought the  Linksys Wireless-N Home ADSL2+ Modem Router WAG120N (Annex-A version). I configured the modem/router and it was working very well. Today I was surfing the internet just fine and I left my computer for a few minutes, when I came back I noticed that there is no internet connection. The internet light on the modem was no longer on, and the DSL one was blinking. I turned off the device and then turned it back on but the issue was still present. I tried restoring the factory default settings and configuring the modem again but nothing seems to work (resetting the modem, turning off every device connected to it and restarting the modem/router). The DSL light keeps blinking, turns off for a couple seconds and then starts blinking again. The internet light only appears when I restart the modem and it flashes red just after turning the device on.

View 8 Replies View Related

Linksys Wireless Router :: Ea2700 Connection To Internet Failed

Dec 31, 2012

went through setup twice, double checked connections, bought new ethernet cable from router to computer, still not connecting. However when i go from my modem to computer i get connected. could i have a faulty router. the router is new from walmart the ea2700.

View 1 Replies View Related

Linksys Wireless Router :: No Internet Access Without Replugging WAN To EA2700

Feb 2, 2013

Every time after the router (Linksys EA2700) is powered off and restarted, there is no interent access available. The router configuration status reports an Internet Address of 0.0.0.0 and all the devices at home are left with a wifi without Internet access. I have to unplug the WAN from the router and plug it in again while it is turned on to restore internet access (and a normal Internet Address is seen from the status page). The WAN works fine with the routers I had previously. I wonder if I have to perform this every time I power on the router. I have tried resetting the router and reinstalling Cisco Connect but that didn't work.

View 3 Replies View Related

Linksys Wireless Router :: EA2700 Randomly Disconnecting From The Internet?

Jan 21, 2013

My new router has started to disconnect for a second or so from the internet then reconnect. I have been unable to see the issue and changing the frequency was unsuccessful. This has also been happening when connecting both wired and wirelessly

View 9 Replies View Related

Linksys Wireless Router :: EA2700 - Unstable Connection To The Internet

Jan 26, 2013

I have had my EA2700 for about 6 months now. Have had no problems until about a month ago.  One night I could not get the router to connect to the internet.  First thoughts were that the cable connection had gone down.  When I finally started to trouble shoot I was able to confirm the cable connection is fine by connecting to the modem directly.
 
Out of the modem I am getting 14+ Mbps.  (I only Pay for 10 So a plus there)

I could not get the router to connect to the internet. I ended up resetting the router and reconfiguring it. Ever since then I have been getting really unstable connection to the internet. 

When I connect directly to the modem (cabled) I am getting a nice steady connection . When I add the router and hardware in I get a good connection only a Mbps or 2 drop off and a pretty steady connection. Then when I connect over WIFI I get a much larger drop off depending on if the device is a 2.4 or a 5

The connection is extremely unstable.  The curve on the graph {URL} is very peaky and has extreme highs and lows. This is multiplied when running on the GHz (as my laptop runs on). My Iphone running on GHz.  I can pull down 9 Mbps but the curve is still up and down. Iphone on GHz I barely get Mbps and it is extremely choppy on the graph.

I am able to back this up with my I PAD. I can only confirm the 2.4 number with the laptop as it does not have GHz radio in it. So every thing that us running on the 2.4 is getting poor connections. 
 
I also suspect that the through put on the wired side is poor as well.  I am unable to prove it as every test I run shows a good connection but netflix has been locking up and I have to restart what ever I am watching 2 to even 10 times a show.  I need to do more testing to be sure the network or the devices are to blame. 

View 2 Replies View Related

Linksys Cable / DSL :: Fiddle X3000 To Blink Internet Light To Show Dsl Activity?

Jan 6, 2012

Any way to fiddle the X3000 to blink the Internet light to show dsl activity?

View 7 Replies View Related

Linksys Wireless Router :: EA2700 Signal Dropped To 5 Mbps / No Internet Access

Dec 8, 2012

I've had this router for about 3 weeks.  It's only 20 feet from the computer, but my computer on 2 or 3 separate days had trouble staying connected.  The signal dropped to 5 Mbps and had a little yellow symbol that said no internet access and when I looked at the properties it said, "limited or no connectivity."  I got impatient and purchased a 75 ft Ethernet cable online with plans to possibly return the router as I don't really need wireless anyways and since I spent $100 on this router I expect it to work at 20 ft distance.
 
For the last few days it has remained at 54 Mbps or more sometimes all the way up to 108 mbps.  But now since it got pretty low a few times I don't trust it enough so I might return it anyways.IPv6 connectivity says no network access.  This might be because when it asked for administrator password to recognize it as a trusted home network I closed it instead of putting in the password.

View 5 Replies View Related

Linksys Cable / DSL :: WAG120N Light Flashing On Modem Router

Dec 26, 2011

I recently purchased the Linksys Wireless N Home WAG120N and I've hooked it up correctly but I can't seem to establish a connection with the DSL light. I've tried hooking it up to different ends in my house with no improved results, however, my older modem works fine.

View 1 Replies View Related

Linksys Wireless Router :: E3000 Internet LED Does Not Light Up

Jun 25, 2011

The Internet LED does not light up when I have access to the Internet like now. I think I remember this lighting up in the past and find it strange that an LED light would burn out so early

View 5 Replies View Related

Linksys Wireless Router :: WRT54GL No Internet Light Or WAN Connectivity

Aug 6, 2011

My house was in the middle of a lightning storm today while I was out and I came back to no internet.  Figgured it was just the phone lines down, but connectiong directly to the modem I found I had connectivity.  The WRT54GL (flashed with DD-WRT) doesn't pick up the WAN IP, I've checked with multiple ethernet cables, 2 different modems (all of which work fine with our computers, providing connectivity) and am currently using the router that the WRT54GL displaced ~8 years ago. I'm assuming it's just dead, but wanted a second opinion...  kinda odd that a surge would have come through the phone line, through a DSL modem and killed the WAN port of the router instead of taking out the modem?

View 2 Replies View Related

Linksys Wireless Router :: WRT54GS / Power Light Blinking - Internet Is Down

Feb 21, 2012

I have a Linksys WRT54GS vers 7.2 Router on an iMac OS X Leopard.  The other day I was in the middle of downloading an upgrade for the router when Firefox gave me this message:  "Firefox can't find the server".  I was no longer able to access the internet, and the router's green power light was left flashing.  It flashed for over 24 hours.  I tried unplugging the router and shutting down the computer,  then plugging in the router and turning on the computer.  (I don't have a modem.)  The light was still flashing.  I tried pressing the logo button for 5 seconds. Still flashing.  Tried pressing the reset button in the back.  Still flashing. 'I can't get on the internet or into the router.  Linksys live chat gave me a link to "Upgrading the router’s firmware using the TFTP utility", which involves a download, but I can't download anything because I can't access the internet.

View 8 Replies View Related

Linksys Wireless Router :: Wrt400n - Internet Light On But Dead Via Wifi And Ethernet?

Jan 20, 2013

WRT400N worked great for 18 months. 
 
Last week the Verizon-supplied DSL modem went bad (wasn't receiving data) and was replaced. 
 
Now I can get Internet direct out of modem, and when I connect it to router the router's Internet light is on, but it seems to stop there. Devices connected to router via Ethernet or wifi don't get Internet. 
 
I'm able to get to the router's admin console via Ethernet and wifi, but no Internet. 

View 4 Replies View Related

Linksys Wireless Router :: WRT160Nv2 Power Light Not Stop Flashing With No Internet

Apr 25, 2009

So I just got this new WRT160Nv2 router. I have (1) wired computer and then my laptop running wireless to it. For the first couple days I had some issues getting consistant internet but after reading some stuff on here I downgraded to the version 8 hardware and it worked GREAT for about 3 days. Now my power light won't stop flashing and I have NO internet connection at all through the router. I have tried to reset the router by holding down the button and also unpluging it but still nothing.

View 9 Replies View Related

Linksys Cable / DSL :: WAG120N Red Power Light

Apr 4, 2012

My WAG120N power light is always red whenever plugged in. I can't access the configuration page. My adapter works fine and the Reset button doesn't work. I can't find any troubleshoot for the "red power light" problem in user manual !

View 3 Replies View Related

Linksys Cable / DSL :: WAG32ON Red Light Blinking

Mar 27, 2013

My Cisco WAG32ON internet light in blinking red

View 1 Replies View Related

Linksys Wireless Router :: Ea2700 - External IP Internally?

May 10, 2012

i got an ea2700 and i cant get the external to work internally which i need for server tests now this has worked before on every other router i had without any editing done but this one doest allow that so what can i do to make it work with this router?

View 9 Replies View Related

Linksys Wireless Router :: EA2700 - Unable To Use 5 Ghz Band

Nov 26, 2012

I have EA2700 Router which support to be a dual-band wireless router and I am trying to connect to my router using 5 Ghz band with AE2500 Dual-Band Wireless-N USB Adapter, I am only seeing 2.4 Ghz wireless band plus even if I manually enter my 5 Ghz SSID my network adapter still wouldn't work on 5 Ghz band. Is there any specific set up in order get 5 Ghz band to work?

View 3 Replies View Related

Linksys Wireless Router :: EA2700 - NAT And Port Forwarding?

Feb 6, 2013

My first issue with this device is when I try to untick NAT to disable it I lose my internet connection. This also disables access to router's address 192.168.1.1 forcing me to reset the device and set it up all over again. Why is this happening? I tried this at least five times with the same result. Second question I have is if the DHCP reservation is the right option if I want to forward ports for certain applications like Vuze? When the DHCP reservation window opens I see all my wireless devices in the list (laptop, phone) but not the main computer which is connected through ethernet port. But that is yet another problem.
 
I've got a cable modem, connection is set to Automatic DHCP and I all want is to disable all firewalls, NAT and other unnecessary protection that's slowing my internet speed, set up MAC address filtering, port forwarding and close this terrible software so I never have to see it or think about it ever again.

View 2 Replies View Related

Linksys Wireless Router :: Ea2700 Wifi Connection With Ps3?

Apr 30, 2013

i have a EA2700 router and I'm connectied wirelessly to my PS3.  If i am not hosting a game i will be lagging all over the place yet it says i have full connection to majority of games that i connect to. i paid 115 dollars for this router and am very dissapointed that its doing this.  Also no there is no way for me to connect wired to the router it is to far away.  Also i tried bringing my ps3 to my friends house and played on his wireless connection and it worked perfectly so its deffinetly my router.

View 3 Replies View Related

Linksys Wireless Router :: EA2700 WPS-PIN 5GHz Does Not Work

Mar 15, 2013

EA2700v1 WPS-PIN using 5GHz does not work.  This router includes WPS header in its 5GHz beacon and probe response but the router removes the WPS header from them once WPS-PIN starts.   There is no problem with WPS-PIN using 2.4GHz. 

View 1 Replies View Related

Linksys Wireless Router :: Changing Password In EA2700?

May 14, 2013

I want to change password in my EA2700 but don't know how to do it. How to change password in EA2700?

Looking for [url]
Find the best [url]

View 1 Replies View Related

Linksys Wireless Router :: EA2700 Not Accessing Web Interface

Jan 24, 2013

I am not able to access the web interface of the router.No, i am not using cisco cloud or smartlink .. yes, it has the latest firmware (Ver.1.0.14.129982).Yes, I might be able to get to it if i shut down the router and turn it on again a few minutes later, but the problem is.. why? why do i have to interrupt connections and not have internet to log into the admin web interface of this device? Is there a known problem with it that makes the webservice go down?.. or to take extremely long to respond and thus the browser to quit on it throwing an error?

View 3 Replies View Related

Linksys Cable / DSL :: WAG200G Don't Get Light On Front Panel On Any Of Ports

May 19, 2010

I'm having trouble connecting via ethernet to my WAG200G. Everything was working fine a week ago but now, nothing.The problem is only occurring with one computer and I've tried the troubleshooting guide on the website to no avail.When I connect the ethernet cable from my computer to the modem/router, I don't get a light on the front panel on any of the ports. I've changed cables, ports, disabled ZoneAlarm and firewalls and nothing comes up. I've checked the ethernet connection from the computer to another computer and it's working fine.
 
On a different computer, I have no trouble connecting to the ports and can confirm that 1-4 are working and the lights come up.

View 6 Replies View Related

Linksys Cable / DSL :: X2000 / Amber Light On Setup Button?

May 4, 2013

I have a Linksys X2000 modem.  Sometimes I see the "Wi-Fi Protected Setup" button glowing orange (amber?) for no apparent reason.  The manual says that it "blinks rapidly in amber if an error occurs" but I don't think any device is trying to connect wirelessly at the time.  How can I determine if there is a problem?

View 5 Replies View Related

Linksys Wireless Router :: EA2700 Disconnects After 30 Minutes Idle?

Dec 23, 2012

My new EA 2700 disconnects from the internet if the desktop is idle for more than 30 minutes. needs to be unplugged for a few minutes then it will reconnect. This is an unacceptable situation and this thing will be tossed if it cannot be fixed. Can this be reset so it won't disconnect? or do I need to replace it with a product from another company?

View 1 Replies View Related

Linksys Wireless Router :: EA2700 - Can't Ping Modem / Get Timeout

Apr 19, 2012

I have an Cisco EA2700 router and a Motorola SB6121 modem. If I'm connected to the router wirelessly or through any of the lan ports, I can't visit the modem's diagnostics page at 192.168.100.1. If I connect directly to the modem, it works fine. Also I cannot ping the modem through the router, just get a timeout. My ISP is Comcast.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved