Linksys Wireless Router :: WRT160N V3 - URLs Being Redirected To Wrong IP Addresses
Sep 2, 2009I am encountering very odd browsing errors when using this router. URLS are being redirected to the wrong IP addresses.
View 9 Replies
ADVERTISEMENT
Linksys Wireless Router :: E4200 - Static Media URLs
Jan 1, 2012I'm a big fan of Cisco products and recently have purchased an E4200. I always connect my iPod classic to the router and listen to the music on my ps3 and laptop. The only problem is that I can't make any playlists since the media server creates a different link to a song, every time I reconnect my iPod. It'd be great if you allow the server to create links like below. I'm sure all the users will e much happier with it! [URL] like this.
Something tells me I'll never see the day that I can activate this feature on my E4200. Anyways, I leave it to your engineers make it happen...
Cisco Switching/Routing :: 3120X - Blade Mac-addresses In Wrong VLAN
Feb 12, 2013- Incoming frames on three of a blade's four switchports are being put into VLAN 1 even though the ports are either in other access VLANs, or are configured as trunks with different VLAN IDs being tagged by the server. - When the ports go down the access VLAN is removed from the port.
Switch stack: 4x WS-CBS3120X-S, 12.2(58)SE1
HP blade: HP BL460c Gen8
This combination has been used successfully elsewhere.
Switchport configuration:
!
interface GigabitEthernet1/0/13 -------> THIS PORT IS OK
switchport mode trunk
[Code].....
Linksys Wired Router :: Cisco RV180-K9 How Many URLs Can Be Blocked
May 23, 2012How many urls can you block with this router also is it good for games and watching videos or is it just a slow business router for business stuff ?
View 1 Replies View RelatedLinksys Wireless Router :: E3200 Gets Wrong IP?
Jun 15, 2012I'm using a DSL line that changes IP's. I have the E3200 set to auto, but everytime the IP changes, my internet goes down, and I get an ip of 127.0.0.1 on the status page. I then have to renew the ip and reboot. This happens once a day, usually.
View 3 Replies View RelatedLinksys Wireless Router :: E3000 Caller ID's Time And Date Are Always Wrong
Feb 29, 2012I have a E3000 with newest firmware that has a VOIP by Velcom. It's a Grand stream HT–286.My device is working perfectly with the router. Can call and recieve calls. the caller ID (Name and number that appears is accurate). The only problem is the caller ID's time and date are always wrong.When I unplug device, it goes back to Jan 1 and time 12:00am.Any call I then get is wrong.
In the router, I've enabled SIP ALG. And the firewall is only filtering ident (port 113) and Anonymous Internet requests.The device has a hard coded internal IP (192.168.123.110). and I reserve the IP using mac filtering.The device has an administration page that is unavailable to users as it's locked by a password. On this page has an NTP server setting that the device uses to get it's time/date.I see on the information page of the device that iot's registered to a sip server.The company is saying that it's a firewall issue. I'm not too sure how to proceed.
Linksys Wireless Router :: E4200 Update DynDNS With Wrong IP Address
Jan 9, 2012Frameware version: 1.0.03.
Environment: Internet (external IP say 24.x.x.x) ISP provided modem+router (192. 168. 1.x/ 24 IPTV network) E4200 (192.168.0.x/24 my home network).
The DDNS option page did report update succefully and shown the external IP address correctly on the page, however when I login to dynDNS it shows 192.168.1.x, which is the E4200 IP dhcp from the ISP's router.I know that it's double NAT, but the 192.168.1x/24 subnet is the IPTV subnet, and my old Dlink router did support and update the dynDNS entry properly.
Linksys Wireless Router :: WRT54g2 Handing Out Wrong Default Gateway
Jan 19, 2012I'd like to add a WRT54g2 to my LAN. I'd like it to communicate with my existing LAN router, and not to talk directly to the LAN. Therefore, in Basic Setup, I don't have the top part (Internet Setup) configured. Is that a mistake?But, it seems that when I enable DHCP, it hands out its own IP as gateway, and then doesn't seem to send the traffic on upstream. When I configure clients manually with the real router IP, they work fine.
So, I'd like, I guess, Linksys to forward traffic on a static route to real router. How do I do this? Adding a route to real router yields the error, "maybe default route already exists."
Linksys Wireless Router :: WRT54G Download A Wrong Firmware And Upgrade It
Aug 29, 2012I have a problem with my WRT54G V8 router.I download a wrong Firmware and upgrade it.After this my router never work again.The PC can't get IP from the router.I tried a lot of time to access to the web admin 192.168.1.1 and other IP and nothing happen.I made a lot of reset cycles, with the procedures 30/30/30 or other with the reset button in combination with the power cord.
Exist any other possibility to recover my router.Can I open and touch other button inside the board or something like this?
Wireless :: Getting Redirected To Scour?
Mar 23, 2012how to eliminate getting redirected to scour
View 4 Replies View RelatedLinksys Wireless Router :: Which AP To Use With WRT160N
Jul 29, 2011I have a router WRT160N and I want to connect an AP using a wireless bridge to enhance my WIFI coverage.Which AP is recommended to use without cable together with the WRT160N?
View 7 Replies View RelatedLinksys Wireless Router :: Get Over Wi-Fi With WRT160N
Oct 15, 2012confirm if the highest speed I can get over WiFi with WRT160N v3 is actually 270 Mbps (and not 300 Mbps as advertised), And there's one more thing - is it normal to have Signal: -51; Noise: -93, SNR: 43, Signal quality 53% if I am only 2 meters far from a router? TX power is set to 28.
View 3 Replies View RelatedLinksys Wireless Router :: Missing MAC Addresses Filtering In Linksys E2500?
Sep 5, 2011I'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.
View 4 Replies View RelatedLinksys Wireless Router :: WRT160N V3 Cuts In And Out
May 1, 2010I have a wrt160n v3. This is the 3rd one - both the first 2 were defective. I have spent approximately 8 hours troubleshooting the other 2 only to be told they're defective. So, I got a new one. Now, this one keeps cutting in and out. I want as my iPhone constantly switches from 3G to wifi on and over every minute. It really ticks me off! What can I do to fix this? This is a different issue than the original one (very slow) and 2nd (no signal). It's disappointing for a $90 router to do this. I also see the wireless icon on the router flash.
View 6 Replies View RelatedLinksys Wireless Router :: Open Nat On A WRT160n V3?
Jan 4, 2012I have all the ports open necessary and i have upnp enabled. my modem is a webmaster DPC2100 series.
View 2 Replies View RelatedLinksys Wireless Router :: How To Turn On Wrt160n
Jan 12, 2012turning my wireless back on. Some how in attempting to create a shared file between my pc and my wife's Mac the wireless has been disabled. I have tried resetting the device several times following the instructions on line however I still can not get the wireless to re activate. I tried reverse directions from the posts on how to turn off the wireless but still no luck. I tried restoring the computer to a later date?
View 2 Replies View RelatedLinksys Wireless Router :: How To Reset WRT160N
Dec 5, 2012How will I reset WRT 160N?
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N Won't Connect To Tv
Aug 3, 2012I'm having an issue getting my tv to start connecting again to the wireless router.Have tried pin setup (timed out & didn't connect...attempted at least 10 times in this fashion)Have tried entering the password (router seems to refuse the connection to the tv)About a month ago, I was in the Network Magic Map & it looked like one of the laptops had been cloned, so I removed it from the network.
View 3 Replies View RelatedLinksys Wireless Router :: WRT160N V3 Keeps Disconnecting
Sep 7, 2011I have a WRT160N v3 Linksys Router and it keeps disconnecting and then reconnecting. It only disconnects wirelessly. LAN still works fine.I have tried a lot of different methods to solve this issue, but none seem to work.I am very dissappointed in the quality of the product. It has done this every since it was bought. I personally would have sent it in for repairs, but others in my household would not have agreed to that.
[code]...
Linksys Wireless Router :: Can't Register The WRT160N V2
Jul 15, 2011Just tried to register my WRT160N V2 and when I tried firstly there is no option for the version 2 model and secondly it says my serial No is incorrect when I have tried it three times and have checked it thoroughly.
View 1 Replies View RelatedLinksys Wireless Router :: Using Skype With WRT160N?
Aug 21, 2008While using Skype I am experiencing poor sound quality, sometimes callers are unable to hear me at all and visa versa. There is a lot of cutting out. My internet connection is fine.
View 5 Replies View RelatedLinksys Wireless Router :: WRT160N V2 Not Connecting
Oct 12, 2011I have two PC's hardwired to this router that are working okay (although performance has been choppy lately). The past 4 days however, when I try to connect wirelessly I get connections that are repeatedly dropped. I am in the Settings section of my iPad 2 and it keeps rapidly switching between "connected" and "not connected". Firmware is up to date.
View 4 Replies View RelatedLinksys Wireless Router :: Print Through WRT160N?
Aug 5, 2012Desktop Xp 3 and connected printer, Comcast cable, WRT160N, wireless laptop w/ Xp 3. Printer is only parallel, and is connected to desktop. How to setup all and print wirelessly from laptop through WRT160N to printer on desktop?
View 2 Replies View RelatedLinksys Wireless Router :: Connect IPAD To WRT160n?
Feb 23, 2012How do I connect IPAD to Linksys router WRT160n?
View 2 Replies View RelatedLinksys Wireless Router :: Using WRT160N V2 As Access Point?
Mar 22, 2013I have a FIOS setup with their Router/modem providing DHCP and Wireless routing. The problem I have is that I have a mix of older equipment and newer equipment. The newer equipment is capable of supporting WPA2, the older is not. I would like the benefits of WPA2, but still would like to at times be able to use the older equipment.My solution was to use a WRT160N v2 router that I had as an access point and it also gives me switch capabilities for wired systems as the FIOS router in on a different floor than the Linksys router. Wired access works just fine and the wireless worked fine until just recently.Since both routers have the same default IP addresses I changed the Linksys to a different static IP and turned off DHCP. I left all of the other defaults the same. I set up the Linksys for WEP and created the key for security. Everything worked fine for the better part of a year, but recently I am having problems where some of the computers cannot find the network or find it then lose connection.
View 9 Replies View RelatedLinksys Wireless Router :: Difference Between WRT120N And WRT160N
Jul 29, 2011I am considering to purchase a Linksys Wireless router, but I just don't know which one to select.There are so many different types that seem to have very similar (if not equal) specs.If I just limit myself to the WRT120N, the WRT160N and the E1000, they all have 4 ethernet ports (10/100), and they all support 802.11 b/g/n for the wireless part.Obviously they all promise a blazing performance, and wireless coverage throughout the whole house, without (many) blind spots.But if their specs are the same, why are they different types?
View 2 Replies View RelatedLinksys Wireless Router :: WRT160N V2 Connects For A Few Seconds Only
Sep 9, 2011I have a WRT 160N v2 router. There's 1 computer wired to it, that works fine. Then I have 2 laptops and a pc wireless to it. One laptop is a mac and that seems to be fine, another is a Compaq notebook that has trouble connecting and the pc has the same problem. The signal strength is very good to excellent so thats not the issue. What happens with the pc is, it will connect but at times its only for a few seconds then it disconnects. Sometimes restarting the computer fixes it for a while but it will eventually start having the problem again. It detects the wireless network just fine, and the router's firmware is up to date. I have a feeling that its the settings in the router but im not sure what to change.
View 3 Replies View RelatedLinksys Wireless Router :: WRT160N Can't Connect With Laptops
May 31, 2008I have two computers on hard line and two laptops. All computers on the line work fine and flawlessly. But when I try to connect the laptops to the computer, they say there's a problem with the certificate. Both detect the connection, and with strong enough signal strength. I've tried WPA and WEP encryption methods, and disabling encryption methods. All had no change. I believe the problem lies with this Wi-Fi Protected Setup stuff, which I have no clue as to what the hell it's supposed to do. I've tried disabling it by turning it to manual, which all computers then lose internet connection entirely. Browsing the FAQ's, I havn't found a solution. I've been working on this thing for a solid 7 and a half hours straight, and phone support is trying to make me configure static IPs, which proved extremely inconvenient in the past.
View 9 Replies View RelatedLinksys Wireless Router :: How To Connect MacBook Pro To WRT160N
Dec 2, 2009I just bought a Linksys WRT160N router. I pop the installation disk in my mac book pro and walk thru the installation procedure successfully.But I can't connect wirelessly from my MacBook Pro (running mac os x 10.5).It sees the router and I did type in the password correctly (i copy from the text file generated by the installation procedure), but I keep getting 'coonnection timeout'.
View 9 Replies View RelatedLinksys Wireless Router :: WRT160N Remote Access
Mar 23, 2010Even when I disable remote access, people still can get to my router login by typing my external IP. Is there anything I can do to stop this?
View 5 Replies View RelatedLinksys Wireless Router :: WRT160N Not Connecting To Internet
Aug 8, 2011My Linksys WRT160N wireless router stopped working all of the sudden. When I connect to the internet wirelessly my laptops say I have full signal but "No Internet Access." None of the 4 wired ports on the back of the WRT160N router give me wired internet. The only way I can get internet is to connect the wire to my internet modem
View 5 Replies View RelatedLinksys Wireless Router :: WRT160N-SG - Unable To Operate
Oct 18, 2011I selected: Static IP
Static IP:192.168.0.100
Subnet: 255.255.255.252
Gateway:192.168.0.1
DNS: 60.49.166.105
I am a Malaysian, using Streamyx here, I search some articles shows that the ISP given is 60.49.166.105 or 60.49.166.106. Am I right in the setup? Why I am still unable to online though successful to connect after the setup configuration?
Linksys Wireless Router :: Connect Two WAP54G To WRT160n
Nov 16, 2011I need to go two ways in my house to improve the wireless signal. Do I just run ethernet cable from the router to the access points? Do i then setup each AP?
View 1 Replies View Related