Unable to connect to internet via laptop + desktop to wireless Linksys router. Model=WRT300N.
Connection worked fine on my laptop before, however, stopped working approx 3 days ago.In attempt to resolve connection issue, I de-install linksys software from my desktop, now I cannot execute setup due to the fact that I cannot connect to the internet.
I've just managed to reset the WRT 300N to default settings and have setup the internet connection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wireless to the network.The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.
View 4 Replies View RelatedI've had this WRT300N for several years and it has worked very well.It suddenly dropped all wireless connections and no one can re-connect. My main pc is hard wired directly to the router and works perfectly as always. 3 wireless pc's and 3 handheld devices suddenly can't connect. I've powered down my modem and router for several minutes, but nothing changed. The firmware was upgraded a long time ago and there are no other upgrades available.
View 7 Replies View RelatedDue to problems with my wifi connection, I had to reset my router and modem. I have to reinstall my settings now, and therefore I need to write down a security number. That should be written on the back of my router (model WRT300N), a barcode with 8 numbers. I can't find that code. Where can I find it or is there another way to reinstall my connection and put a password on it? It's open access now.
View 2 Replies View RelatedHere is where I want to go:
Windows server 2008 (providing DHCP and DNS) 192.168.89.1 on all
Cisco SG 300-20 (switch) 192.168.89.3
all Clients(15 x DHCP assigned IPs) connected to switch
WRT300N(192.168.89.2) connected to switch
Internet modem connected to WRT300N
To achieve this I need to disable DHCP on the WRT300N, since my server is providing DHCP.The issue I have is that when I disable DHCP at the WRT300N, I lose internet connection (connected to either switch or direclty to WRT300N).
I have a brand new E4200 with two desktop computers using it with no problems. I also have a work Thinkpad laptop that I use a couple of times a week from home. Since day one of installing the new router, I have experienced the blue screen of death numerous times during the day (the number of times varies from 1 to 6 on a really bad day). I believe this is happening when I lose my connection to the router. I can see it trying to reestablish itself but the VPN will drop the connrection before it has a chance. I never lost my VPN connection until the day I installed the new router. Yesterday, at least one time it was unable to reestablish connectivity with the router and I had to reboot the laptop to get it connected. Could this have something to do with the IP address? I do not have any issues with the laptop when I am at work using a docking station.
So, I am wondering why I am constantly losing connectivity on the laptop only. The laptop has Windows XP and I am using AT&T Global Network Client to access the work network. Is there a setting somewhere that will fix this? Our IT folks rebuilt my laptop and I am still experiencing the same problem. I checked and I have the current version of the firmware for the router.
After enduring some protracted problems with wireless connectivity, I decided to bite the bullet and upgrade my Linksys WRT300N from firmware version 2.00.08 to 2.00.21.I found the links to advice on how to achieve this, via a two-stage upgrade url...I followed the following steps: Upgrade firmware using file "wrt300n.bin" file, as per the above link. This brought the firmware version to 2.00.17. Upgrade went smoothly - config page refreshed after rebooting the router and all was well.Upgrade firmware using file "WRT300N-EU-ETSI-ML-2.00.21-code.img" file, downloaded from the Linksys support site. Again, the upgrade went smoothly (apparently) ... except that after rebooting the router, my config page failed to refresh.I have since powered the router off (wait 30 seconds) and on again. Still no web access.
The device, however, does seem to be working OK. I have wireless access, and wireless access, via computers on my network. The only thing I cannot do is access the web config page - but that's not quite satisfactory. I have a number of customised settings on the device, saved to a config file. Included among those is a changed IP address for the router of 192.168.1.10. I am tempted to do a hard reset to factory defaults, connect via a dedicated cable connection and then reapply my custom settings (either manually, or from the config file.) However at this stage I have no confidence that the device will have web access after reset - and then it won't be working for me at all!
Does firmware version 2.00.21 require http access via a specific port (i.e. not 80)? Is there some other way I can access the device for modifying configuration, other than by the web utility? (I have posted another question about obtaining a copy of my long-ago-misplaced Setup CD-ROM.
I unplugged my router and when I plugged it back in, it stopped working. The 4 port lights and the ethernet light come on immediately when I plug it in instead of the normal boot sequence.
I tried resetting it, leaving it unplugged for long periods, using the power supply from my other router,... nothing works.
Just got WRT300N for connecting my ps3 thru wi-fi. I got everything works but the signal that I got from my PS3 is around 50% only. I am using latest Linksys firmware. My ps3 is located around 25 feet away one floor down from my wireless router. But there is no major wall inbeween the connection. My WRT300N should be a cutting edge product for networking. How come I still got 50% signal strength? Besides moving the router or pS3 closed to each other.
View 5 Replies View RelatedI have WRT300N V1.0 with Firmware v1.03.6.what is latest Firmware for WRT300N V1.0 and where I can get it.I tried at Downloads under Support in Cisco website but it said "No firmware/driver download available".
View 1 Replies View Relatedi looked everwhere for the firmware. cant find it anywhere. looking for 1.0 or 1.1 firmware for wrt300n.
View 4 Replies View RelatedPS Linksis Online Support said they do not have old firmware andgives me some phones to call .. Others have written about the same problem, saying that prior toupgrade with new firmware to be flash with 2.0.14.I need firmware - version: 2.0.14, where to find it?
View 9 Replies View RelatedI need to be able to setup to 5 external ip addresses. I was told to do this you need one to one NAT. I don't know if my router has this or not and if not is it possible to upgrade the firmware for this feature? the router I have is a linksys WRT300N V1.1 firmware : Firmware Version: v1.51.2
View 1 Replies View RelatedIn my home I have a cable modem wired to a links wireless router a wrt 300n in my office (only hardwired used in there) and I do not get such good distance to my back bedrooms with my laptop. I have run a Ethernet cable dead center of the house for my sat receiver that is connected and wired to the 300wrt. Here is my question can I use the 150 like a hub or switch at the office connected to the cable modem and use the wrt300n router so that I get wireless on that side of the house. Or in reading here I see I can maybe use a bridge. I do have a older Linksys wrt150n sitting in a box.I have read until my eyes are almost bleeding and am not sure. How I can get a better signal on the other side of the house.
View 4 Replies View RelatedSince the secondary router WRT300N uses the same default IP 192.168.1.1 as the primary installed router EA4500, any attempt to log onto the set up page results in diversion to the Cisco Connect Cloud for the primary router.
Is there a way to access the set up page for the secondary WRT300N, bypassing the main router intervention via the Cloud software?
For reasons I will explain in a separate thread, following a firmware upgrade to version 2.00.21, I am no longer able to connect to my WRT300N using the web interface. The device seems to be working fine (but for the lack of the web config access.) I'm loathe to leave it "inaccessible" and would like to use the Setup CD-ROM described in the manuals to connect directly to the device to see if I can fix the problem.
I have been through my "filing system" (read "junk room") to try to find the original device packaging, wherein I am sure I would find the original CD-ROM. Is there anywhere I can download an image of the original Linksys Setup CD-ROM for the WRT300N version 2.0 device?
So lately my internet has been painstakingly slow, Youtube videos dont load, Web Pages take FOREVER, its killing me. So I ran some speed tests This is wireless over my router. (WRT300N (Yes i know its old))
And this is direct connetion from my modem this really just makes me want to never use the internet again.
I have a WRT300N wireless router that was working fine until I tried hooking up an Air ave Access Point for Sprint. Now the router doesn't work at all - even the hard wired connections don't work. I tried the usual - unplugging, plugging back in, disconnecting, reconnecting, hitting the reset button - nada.
Removing the Air ave Access Point doesn't matter - it still doesn't work when I put it back the way I had it before. The only way I can get a signal to my computer is to plug it directly into the modem, bypassing the router.
Why I can't play online on xbox live. I'm set on going online but when I go on to play online for MW3(Modern Warfare 3) my NAT Type says strict,I can't join any of my friends games. It says to go on infintyward.com/Nat and when I do it doesn't show my model of linksys (WRT300N) i reset my xbox,my router and still nothing
View 3 Replies View RelatedI cannot seem to figure out how to connect my Canon MP620 Wireless printer to my wireless router. The router is a WRT300N v 1.1 with the latest firmware upgrade. I am using WPA for security. I can connect to the printer wirelessly through my neighbor's open system so it has something to do with security I suspect. I have enabled the AP feature and disabled it to see if that is an issue. That has not changed anything. I have looked at other posts with HP printer issues and access point posts but none of those solutions have worked. The Canon gives me an option to use the WPA, WPA2 and WEP?
View 3 Replies View RelatedCan a Linksys WRT300N wireless router be used as an LWAPP AP device?
View 1 Replies View RelatedI have installed a WRT300N on to a new machine and the connection speed reads as 1 Mbps (not 100 but 1 ). I did a ping test and the results are
View 2 Replies View RelatedIf I conact from the modem to the pc I have internet so it must be the router. The power light is blinking along with all the port lights. Power light is blinking one time slow 2 fast. Have tried holding the reset button for 30 seconds and unpluging for 30 seconds. Can not go to the ip address it times out. New firmware is not avalible.
View 9 Replies View RelatedI have a WRT300n router and want to connect to my Uverse Gateway. When I connect them & try to use the internet connection I get an error that says a connected router must be capable of using DYnamic IP addresses.
View 1 Replies View RelatedI have a WRT300N and the power light is dim and all 4 ports are solid green along with the internet light being solid green.. Nothing else is plugged in.. Just the power.. I have tried to hard reset and nothing happens.
View 2 Replies View RelatedComcast service went down in our neighborhood and when it came back up my internet was down and all five LED lights on my Linksys router are solid green. Tech support tells me that I have to reset the unit to get it to function again.It's been a very long time since I set up the home network and while I'm pretty sure I can make my way through setting up from scratch (I'm assuming resetting goes back to factory settings) I was hoping there was a way to reconnect the router to the modem while retaining all the current security and settings.
View 2 Replies View RelatedWhether the Linksys WRT300N wireless routers are compatible with LWAPP configuration?My school lab setup uses Cisco integrated services routers with NM-AIR-WLC6-K9 network modules as controllers in the LWAP network. The controller accepts configuration without error but does not pick up or seem to see the WRT300 AP routers, so cannot push out basic LWAP config info
View 1 Replies View RelatedJust replaced a WRT54GS with an E2500. It seems that anytime a connected device goes "idle" for a while, the connection breaks or severely reduces and it's nearly impossible to get the connection back without performing an action at the device in question. Let the wireless connection on my laptop go unused for some period and it reduces to 1Mbps and you can't get back on by just using the link more... you have to do a "repair".
Let more than a few minutes pass since you've printed something on the wireless printer and you MUST go to the printer to re-establish the connection by turning the antenna off and then on again.Basically the same problem with my blueray/DVD getting on the network. When I shut the screen off on my phone, the wifi dies and receives NOTHING over that link while the screen is off.
None of these behaviors existed with the WRT... just the 2500. Background/facts - current firmware, DHCP with reservations, WPA2/per, MAC filtering in use, UPnP disabled. MTU/Beacon/Frag threshold/RTS threshold set per recommendations on this site.
I have a WRT160 V2 router with firmware v2.0.02. I have had the router for years without any problems. A few months ago I have started to see an issue where I lose connection to my internet on my laptop, and wifi on my phone at the same time. I have wifi calling on my phone and it disconnects also at the same time. All of a sudden, everything will stop working, then about 40 seconds later, it all works again. I lost the connection maybe every 30 to 60 mins. I rely on wifi calling for my primary phone, and I end up getting cut off when talking to people. BTW wifi calling is for all tmobile phones, but also normal wifi to surf the web on my laptop and phone drops too at the same time.
View 7 Replies View RelatedIf I get a new wireless router that is N and attach it to my desktop computer, will my laptop which has a G wireless card in it be able to work without any modification? I thought I read that N is downward compatible with B and G cards, but then I saw some kind of network adapter that is put in the USB and wondered if I'd have to do that with the laptop. I'm leaning towards a E3200 right now.
View 2 Replies View RelatedI upgraded my old Linksys wrt54g to the E1500. All the XP os are connected via cable and wireless connection, but the Vista laptop i get local access only connection error. This laptop used to connect on the older router using wep but with E1500 wpa-2 it cannot connect. I am unable to ping the router from the laptop wireless. Connecting ethernet cable it works fine and logging in as a guest works does too.
View 1 Replies View RelatedI have a new EA3500 router that's working great for a variety of devices* except a Windows7 laptop. 24 hours after establishing a connection, the laptop loses connectivity and it's very difficult to re-establish a connection. Usually I have to reboot the router, but 24 hours later the problem returns and Windows is unable to connect.
My router settings include DHCP client lease time set to 1440 minutes (24 hours), so I thought the problem might have something to do with DHCP lease renewal. To test this theory, on Saturday night I did ipconfig/release and ipconfig/renew and established connectivity from the laptop.
Sunday morning I spoke with Linksys support and changed several settings per their recommendation:Network mode mixed (I had it on N-only for some reason)Assigned different SSIDs to the 2.4GHz band and 5 GHz band2.4 GHz band channel is 20MHz only, using channel 95 GHz band channel is 40 MHz only, using channel 161I also power cycled the router. Everything worked fine until Sunday night, 24 hours after the release/renew, when I lost connectivity. I am not sure what to try next and whether the problem lies with the router or the laptop.
I have a cable modem with an E3000 router, wired to my desktop. Internet connection is fine for my desktop, wired to Xbox, wifi for Iphone, Ipod, but no connectivity to my laptop wirelessly. I have run the repair automatically on my laptop (Windows 7) and get 2 different messages when trying over and over to use this tool. 1. Network Configuration Problem 2. Problem with wireless adapter or access point. I get a "fail" when trying this:
1. If your client device has a Wi-Fi Protected Setup™ button,click or press that button and then click the button on the right. or when putting in the router's pin number.