Linksys Wireless Router :: WRT54G - Password For Access Router's Web Utility?
Aug 10, 2008
I have tried multiple times to hard reset my Wireless G WRT54G ver.2 router, but have had no success. I held the reset for 15 sec, 30 sec, 2 min, etc and also tried holding it and then unplugging it and then plugging it back in. I've tried everything that I have seen suggested. My problem is that I don't know what the password is to access my router's web utility thing and I need to change the IP address. With every reset attempt, I hope that the default admin password will work, but sadly no.
View 2 Replies
ADVERTISEMENT
Dec 10, 2008
I am having trouble logging in on my wireless router and when i put "admin" (WITHOUT QUOTATIONS) on the password, the same prompt kept on coming for three times and after that the message says "401 Authorization Required" (WITHOUT QUOTATIONS). I don't get though, i installed the wireless router just after i change admin and my password into (******).
View 9 Replies
View Related
Sep 22, 2011
i have router WRT45G ver 7 it work but when i want to access in web base utility the router reboot
View 4 Replies
View Related
Jan 10, 2013
I'm trying to access the browser based utility (@ http://192.168.1.1) on my router and having no luck. I've tried from two different computers (each Win 7) and each browser. I've tried wired directly to the blue/LAN ports and through Wifi. I've confimred that the IP is correct (or is at least the default gateway for each machine). The Cisco Connect tool can't find the router either.the only thing that can find the router is the CiscoConnect Express app on my iPhone.Internet is working fineish (some problems with Wifi), I just want to play with some settings.
View 1 Replies
View Related
Sep 13, 2011
I have a Model #WRT54G-V8 Linksys Router. I never set a password to keep my neighbors from accessing my router. I no longer have an Manual either. set a password or a manual to do that ?
View 1 Replies
View Related
Jan 6, 2012
Setting up a passcode for my router. I have searched online but so far have not been able to find anything.
View 1 Replies
View Related
Apr 9, 2008
I want to know how to change the Router Password. I have two computers running XP connected to my WRT54G; one via cable and the other wirelessly. I'm using WEP security. The router setup defaulted to "admin" for the Router Password; I'd like to make it a stronger password.
View 9 Replies
View Related
Jan 9, 2008
i'm attempting to access the router's configuration options (192.168.1.1) and it's requesting a user and a password, i have not set any of them so i'm using the defaults, been, user (blank), password (admin) but is not taking them; after 3 attempts it gives me a 404 error.
View 6 Replies
View Related
Jul 4, 2007
I have changed the router username/password in the past and either I can't remember it or its not accepting what I am entering, because the router logon will not go through. I have unplugged the router for 5 mins and then let it come back on and still cant get in, pressed the reset button down and let it come back up still nothing, and I have unplugged the cable modem and router for five mins and then plugged them both back up and I still can't get the router to reset to the default admin password. In the past it has worked before but now nothing I try will let me into the router interface to set up anything.
View 4 Replies
View Related
Oct 28, 2007
My router has been in use for some time. WRT54G. I did the set up from the disc and instructions and it's been no problems. I would now like to add a password to log on to it from a wireless computer such as my laptop or the other household computer.
View 9 Replies
View Related
Sep 11, 2007
im trying to reset my linksys WRT54G wireless router because im trying to change some settings. i tried the 192.168.1.1 and it asks for a password, but i dont remember putting one on....i tried the admin in the password field and empty name field but that dosent work.I've tried holding the reset button on the router itself for 10sec+ but that dosen't seem to do anything.
View 9 Replies
View Related
Apr 24, 2011
I have a Lynksys WRT54G wireless router. It works just fine until I try to put a password on it. I go through the basic steps, it talkes all my information and tells me everything is good. I try to sign on the internet and it tells me my password is invalid....and YES Im sure its the right password I entered. I went to http://192.168.1.1/wireless.htm and did all the necessary instructions, and still, it doesn't work. I can change my network name and it works. As long as I leave it unprotected, everything works fine, but when I add the password, it tells me its invalid. I even used 123456 so as to make sure it was the right one.
View 5 Replies
View Related
Feb 11, 2013
I have a iphone that will not retain the password for a WRT54g. Each time I leave the house, I have to renter the wifi password on my phone. It remembers other networks, just not the house.
View 1 Replies
View Related
Feb 6, 2008
I have a linksys WRT54G router. I am able to get to the admin menu via IP 192.168.1.1 but can not figure out where to to navigate to or how to put a (password on the wireless access) so my neighbors wont be able to use my router to get on the internet.
View 5 Replies
View Related
Jun 19, 2011
I haven't used my Linksys WRT54G v5 wireless router for about 1 1/2 years and needed it now at a new place.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and I've lost the disk for the control protocol program.I tried pressing the reset button to clear the modem and it took the WPA protocol off the modem so I can use it without any security but that's not a good thing.How do I get it freed up so I can get to the security protocols and put security back on my modem?
View 9 Replies
View Related
Dec 21, 2011
I would like to enable VPn in WRT54G.Cann't find where to set up user name & psw.Is client necessary to set up user name & psw if there was no need to set up user name & psw for in WRT54G ?
View 3 Replies
View Related
Jan 7, 2013
My Iphone 5 will not remember the password for my wrt54g .
View 2 Replies
View Related
Feb 17, 2012
I just dug my router (wrt54g) out of the closet and hooked it up but I cant remember my name or password for the router. Is there anything I can do that doesn't involve paying linksys any sort of "fee"
View 2 Replies
View Related
May 13, 2013
I was given this router (it's my 3rd one) and cannot get the reset button to reset the password. I have run throught a 30/30/30 reset as well as just holding the button in for the standard 30 seconds.
I know the router works, as in i can ping it. It asks for a password when i go to 192.168.1.1, but *blank* and "admin" do not work. When i click the cancel button it displays a pink(salmon) screen that says "401 Unauthorized Authrization required". (all of this is when i am connected to it with an ethernet cable to #1)
When it's sitting there it has an led lit over power and one ove wlan which flickers from time to time.
View 1 Replies
View Related
Jul 15, 2012
Time Warner used remote access to get into my wrt54g system and create a new user id/password for security. As a result, my hp printer will no longer communicate with my computer. HP says to hook up a usb from router to printer, but there's no usb port on the wrt model I own. I hooked up a usb from computer to printer but it did nada...
View 5 Replies
View Related
Jan 24, 2013
I have a WRT54G Linksys router and I am wondering what is the default username and password for port forwarding?
View 1 Replies
View Related
Apr 30, 2007
I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?
View 9 Replies
View Related
Feb 2, 2007
I'm trying to setup a Linksys wireless-g router model number WRT54G with my DSL connection. I followed the basic instructions that came with the router and towards the end of the process it says detecting network settings with a % bar. The bar fills to 100% and then asks for a password. I've tried the password my DSL company gave me along with various other things like admin etc. After I enter the password I hit enter and it just asks me for the password over and over again.
View 9 Replies
View Related
Jan 3, 2013
I have a WRT54G V8 and everyone says the username to sign is is blank and the password is admin. I have tried this and it does not work. I have also reset the router several times and this also does not work.
View 2 Replies
View Related
Dec 26, 2011
I need to retrieve my password for the linksys router wrt54g
View 1 Replies
View Related
Aug 5, 2011
I purchased a used WRT54G router that has DD-WRT firmware installed. I do not have the user name and password for it. How do I get around that issue so I can set the router up on my network. I would like to keep the DD-WRT firmware.
View 2 Replies
View Related
Apr 13, 2012
I had my router settings in a file on my hard drive so I would not lose them. Just my luck, my hard drive took a giant dump and the restore did not restore 100% and guess which file was among the missing?So I've followed about 15 different "reset" instructions which includes holding the reset button for 10-60 seconds; unplugging the router afterwards for anywhere from immediate to 60 seconds. Obviously, none of those sets of "sage" advice had any influence whatsoever on my router. My "server" is of my own creation:
Core2 Quad Q9550;
8 GB PC28500;
Gigabyte GA-EP45-UD3R;
Windows 7 Ultimate 64 bit SP1.
Cable Modem RCA DCM425.
View 5 Replies
View Related
Nov 14, 2011
My own sites were down & I can't view them on my computer now.This is the 2nd time this has happened to me with router WRT54G.Every time there's a problem with my hosting company & my sites go down, my router blocks them once the sites are back up & running.When I plug directly into the modem I can access them, but then I can't use my phone, etc.I've recycled & I keep trying to find how you save your settings on your router so I can do a cold reboot, but I can't find the instructions anywhere.Why does it keep doing this & how to save the settings & restore them.
View 2 Replies
View Related
Dec 11, 2011
I am using a newer wireless router but would like to use my older wrt54g router as an access point (wired and wireless) at the other end of my house. how to do it, and what the specific settings should be, especially the security settings. I can connect the wrt54g via a homeplug (cannot run a LAN cable). I had previously tried an Aztech wireless homeplug but found the security feature to be worthless and everyone was able to "break-in".
View 3 Replies
View Related
Apr 7, 2012
I can't access the router through the IP within the browser. It's an older WRT54G. I've never used the downloaded software that allows you to connect to it, but that's what I was going to try.
View 1 Replies
View Related
Apr 4, 2012
I have a E4200 as well as a WRT54G. I'm looking to create two different access points to the same network, one access point being 802.11g (WRT54G) and the other being 802.11n (E4200) I want to do this because I need the extra speed from 802.11n for streaming video to my consoles. The problem is that there are multiple devices that only reach up to 802.11g. Would it be possible to plug the WRT54G into the E4200 in order to give a second access point (probably with different SSID) so that 802.11g devices can connect to the network, without having to destroy my 802.11n network? The WRT54G is currently running DD-WRT.
View 3 Replies
View Related
Dec 29, 2011
wrt54g wireless router so we could get Netflix through our Wii. I have a one year old Compaq and am running Windows 7 with a wireless Internet connection through my service provider. I installed the router with no problems and was able to get online with the Wii. However, I am no longer able to get Internet access on my desktop. It shows that my Internet is connected, but it shows "No Network Access". I had gotten on fine at first, then I went to the 192.168.1.1 site to configure my data. I changed my time zone and then went to secure my connection. I cannot remember the exact option I chose, but I think it was something like WAP2 Personal. As soon as I selected that the screen froze and I can no longer access that site or get online through the router.
View 3 Replies
View Related
Jan 31, 2013
I upgraded my wrt54g v.2 with a firmware for wrt54gl and now, the power light is continuous blinking and I can't access via web to the device.I tried to reset it and replace the firmware without success.
View 3 Replies
View Related
