Modem Keeps Disconnecting Every Minute Or So
Oct 21, 2012Some times it lasts for some hours and then starts disconnecting every minute or so. Sometimes i just turn the computer on and it already starts his routine of disconnections.
[code]....
ADVERTISEMENT
Wireless Internet Keeps Disconnecting And Reconnecting After About A Minute?
Jun 5, 2012I got a new laptop (Toshiba Z830) last month and for the last few days my wireless internet keeps disconnecting and reconnecting after about a minute. It'll disconnect and say there's no internet (there's a yellow exclamation mark on the icon on the taskbar) and after about a minute it'll reconnect. I don't know if there's a pattern but I've noticed it keeps happening when I try to watch a video on youtube and sometimes at other times. No other device of mine is having any problems (desktop, phone, netbook), just my laptop.
View 1 Replies View RelatedADSL Sweex Modem Disconnects Every Ten Minute Or So
Feb 7, 2011I've got a ADSL Sweex Modem, connected to a D-Link Wireless Router,The modem is connected to our telephone line, we have other phones connected to other "telejack" too. The router is connected to a computer with wire, and another computer wireless.Every now and then we get random disconnect. Sometimes we can go several months without a single disconnect,whilst sometimes it happens as often as every 3 minute. This is the log:
[code]....
D-Link DIR-655 :: Disconnecting With Motorola Modem (DSL)
Mar 19, 2011I get this at random times. My internet disconnects until I reset my modem and I don't think it has anything to do with the modem because I had it replaced by my ISP and they did a few line tests and nothing was wrong. What can I do to avoid having this problem anymore? It's been doing it for almost 2 weeks now and when it decides to do it is random.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G2 Disconnecting From Cable Modem
Jun 10, 2011Our router is connected through a cable modem and If I connect my computer directly wired to the cable modem, I have no problem, it does not disconnect at all.In comes the router in between, when I connect the router and connect my computer through the router WRT54G2, it works initially then I get disconnected after about 1-2 hours. This is very regular. I have a temporary solution by resetting the router via two ways:
1. Go to the admin page, and perform a release and renew IP method.
2. Simply power off the router and then on again.
DGN1000 Modem / Router - Linux Keeps Disconnecting From Wireless Network
Sep 11, 2011I'm running Arch Linux on an Acer laptop and my wirless connection doesn't stay up. After a while it disconnects, and when I try to reconnect I get stuck with a "Waiting for authorization" message. I have to retry several times before getting the connection stay up for few minutes. This happens with both networkmanager and wicd. The strange thing is that the iMac that sits next to the laptop connects fine, and when I use my laptop within the university wireless network it works normally.
I use a Netgear DGN1000 modem/router
Losing Connection After Every Minute
Aug 29, 2011I recently moved to a new location and my wireless internet disconnects, literally every minute. My roommate never has any issues with his wireless connection, and this is the first time I've had connection issues with this laptop.The provider is Comcast and it runs through a hard wired/wireless modem (no antennas). Our connection is encrypted. My signal strength is always excellent, but still briefly disconnects with a continuous cycle, as it automatically reconnects.
View 11 Replies View RelatedUsb Dongle Wifi Connection Last Only A Minute?
Aug 27, 2011i have usb dongle wifi which i used to connect via wireless router i can connect for a minuite after i plug it and then after a while it cannot browse internet while indicating that is connected as can see on command promt with pinging command "Request timed out" contineously so i going to replug the usb dongle again to connect.
View 1 Replies View RelatedWireless Cuts Out Every Minute For 3-5 Seconds
Jan 7, 2012im on widows seven and it is a lenovo laptop. It cuts out every minute or so. it say not internet access in my network connections. my router is netgear swell i think. its security type is WPA2-PSK. It mainly happens when i go to play an online game called roblox but also happens when i open up any normal pagge as well. I looked for the WZC but I coudnt find it.
View 1 Replies View RelatedInternet Connection Goes Out Every Minute Or So For About 1-2 Seconds
Dec 26, 2012The problem I am having is my wired internet connection is going out every minute or so and stays out for about 1-2 seconds at a time sometimes it stays out for around 3-4 mins usually twice a day. This problem has been occurring everyday for the past 2 or so years some days it is worse. I have power cycled the modem and router many times, replaced the router, replaced the modem bypassed the router and it always does the same thing. I have gotten cox cable to come out many times, once was to replace the modem, and it conveniently does not have problems when they come then i look stupid. I have showed them the screen shots of the outages from pinging multiple points on the network as shown in the attached screen shot, as you can see in window labeled 1 is a continuous ping of google.com, window 2 is the first hop on the tracert as shown at the bottom of the picture, window 3 is my modem, and window 4 is my router.
As you can see I never lose connection to my router or modem and it is the same when i run tests from other devices. Every time I call them or show them this picture the only response I get is there are no reported outages and to try to reset my modem and router or they can send a tech. When the tech comes there seems to be no problems and I show him the screen shots and he writes it off as peak hour malfunctions even though it does it at non-peak hours as well. Then when he leaves It starts to freak out again I have gone through this scenario at least 3 or 4 times and at this point am getting very frustrated. Even though it is not very noticeable with normal web browsing in gaming and streaming it is a nightmare. I would have already switched service providers if there were any other that service my area.
Keep Getting Blocked From Any Network Activity For 1 Minute?
Dec 25, 2011I keep getting disconnected and blocked from using even LAN on my computer. This happens whenever I visit certain websites. For instance, I registered on a website that has me "kept signed in", and whenever I click to view that website, it partially loads and then for precisely 1 minute any network activity I try (like visiting my router configuration page, or clicking refresh or home to load google) will not go through. Only after that one minute is over with, I can resume browsing that website; however, if I leave it for too long, and then return, the same thing happens.
I've also noticed that if I sign out of that website and then visit it, that disconnect issue won't happen.But that isn't the case with other websites, as they require no accounts and are just pages with news and other stuff.I tried uninstalling and reinstalling my ethernet drivers, tried flushing dns, renewing ip, releasing and some other /cmd stuff that I found online.This also doesn't happen on any of the computers connected to my router (although, they are all using wireless - I am using cable to router).I'm on windows 7 x64, using a realtek ethernet card, Nod32 security suite (think it may be the settings on this thing? I set everything to super safe settings so I don't get any dumb viruses). Windows is updated (well, at least 3-4 months ago it was updated). I have no idea what is causing this, and why the precise 60 second interval until I regain access to the internet.I'm using Firefox, but this also happens on IE8 or 9 or whatever I have installed, so I don't think it's a browser issue.Things like facebook, youtube, pennyarcade and other junk work, but as soon as I go to google looking for, say, apartment rentals and open some pages, one of the links in the search results is bound to make my connection freeze.
No Connection For A Minute Or Two - DNS Server Not Responding?
Jan 4, 2012I have Broadband Internet and TV through Time Warner Cable. In the past week I suddenly began to lose stations on my cable box from what seemed to be a loss in signal so I had tech support come out to take a look at the problem. Turns out the problem was the wiring in the cable box outside the house. The wiring was over a decade old and had been damaged by water and ice over many winters. Tech support guy replaced all the wiring and the cable box is back to normal!However, after sitting down to use the Internet afterwards my connection kept "dying". Every ten to fifteen minutes or so the connection would seem to die for a minute or two.
All devices connected to the router either wired or wireless experience the issue at the same exact time. Windows diagnosed the problem as "DNS Server Not Responding". Now my router setup has been working for years, and nothing has been changed, so I thought maybe it could be related with the issue with the cable wiresHowever, researching the DNS issue on Google makes me think it's just coincidence.
I rebooted and power cycled the modem and the router. The issue persists. Updated router firmware. The issue persists. I changed my DNS settings to use OpenDNS. The issue persists. Changed DNS settings back to automatic. The issue persists. So I disconnected the router and plugged the modem directly into my main PC and the issue was completely resolved! Hooked up the router again and the issue popped back up after ten minutesRepeated all the troubleshooting steps and the issue persisted through them all.
Takes A Minute To Load A Picture?
Aug 22, 2011I did a speed test and everything seemed good. Dl speeds at 16mb/s and upload speeds at .99 mb/s. However when I go to websites and load pictures it takes like a minute to load. Why is that?y speed seems fine when I test it, but slow to load stuff.
View 1 Replies View RelatedWrt54gs Connects But After About A Minute It Looses Connection?
Mar 20, 2012wrt54gs connects but after about a minute it looses connection and boots continuously
View 1 Replies View RelatedSonicwall Router - Every 1 Minute The TCP Connection Is Dropped?
Sep 1, 2011we got a Sonicwall router and we have been having stability issues. Every 1 minute the TCP connectio is dropped as well as UDP packets. This router is connected to a T1 connection and its requesting a DHCP lease every couple minutes as well. We originally had two WAN connections, and we have disabled the second one because someone thought it was that, but obviously it has to do with the internal network. This is a dual WAN router.
View 4 Replies View RelatedD-Link DIR-615 :: Connection Dropping After Only A Minute When Using Mushclient
Nov 30, 2011I'm using the 802.11 Mode Mixed, with WPA (Both WPA-WPA2).
I'm new but I recently bought a new D-Link DIR-615 router. After getting everything setup manually due to the cd install not working properly. I was walked through the manual setup with D-Link Tech Sup. Now everything is working fine, but when I go to open mushclient and log into one of my mushes to rp, I will connect just fine, but after a min or so the connection drops on the client itself.
Now before this D-Link, I had a Netgear router and Lynksys Routers, ran the install software and everything. Things worked, I was able to login to my mushes and not worry about getting disconnected from them. But now with his router, I feel because I didn't install the software, that something wasn't setup properly and I have to reconnect to the mush every few minutes. Now the internet doesn't drop, I'm still online, still able to surf, able to play on my Xbox 360 and connect online with my laptop. But this one program, the connection drops constantly. Now If I just connect using just my modem, I can stay connected until the mush times out due to me being idle for say about 8mins. But if I'm chatting with someone in Mushclient, the connection drops and I have to reconnect.
Cisco AAA/Identity/Nac :: ACS 5.2 Integration With RSA Allow Only One Login Every Minute?
Nov 1, 2011I have an ACS 5,2.0.26-8 running on VM intergrated with RSA. Users are able to login using their RSA passcode for network management utilizing TACACS. The problem seam to be related with RSA token caching. Once a user login sucessful on device A using current token he can not login with the same token on another device. User must wait for a new token and then he can login again. Before moving to ACS 5.2 we were using ACS 4.2 (intergrated with the same RSA) and back then ACS 4.2 cache passcode so user where able to login on devices using the same passcode. When the token change user have to use the new one. providing the same functionality like the "Token Card Settings" Durantion option under group properties, to cache token for a specific period. The global option for caching under RSA definition on 5.2 does not solve the problem.
View 4 Replies View RelatedCisco Routers :: RV082 Timeout After Every 30 Minute?
Nov 14, 2012i purchases cisco rv 082. i set MTU vale at 1500.i use public IP for WAN and just using one WAN.
View 4 Replies View RelatedCisco Firewall :: ASA 60 Minute Inactivity Timeout?
Feb 15, 2013We had an issue the other day where doing backups through the firewall (don't ask) caused the "control" session to timeout while the backups were still going on over the "data" connection. This broke the backup about two hours into the job. My first thought was that the backup solution vendor should implement some kind of tcp keepalive for the control connection. A packet capture showed they indeed were -- after 2 hours! Ah ha! Busted! How could they choose such a poor choice of TCP keepalive timer for their application that would not be compatible with the 60 minute inactivity timer that so many firewall vendors use (Cisco, Juniper, Checkpoint and Fortinet all use a default 60 minute inactivity timer for TCP)?
Well, a colleague of mine pointed out that there is actually an old RFC that covers this. RFC 1122. It says:
Keep-alive packets MUST only be sent when no data or acknowledgement packets have been received for the connection within an interval. This interval MUST be configurable and MUST default to no less than two hours.
Now I know that RFC is old (October 1989), but that's all I could find. Is there something that supercedes that? Maybe common sense perhaps? I understand not wanting to fill up your connection table because of mis-behaving applications, but I'm just looking for ammunition to use against the backup solution vendor. Surely they're going to point to this RFC.
ASA(config)# timeout conn ?
configure mode commands/options:
0:0:0 | <0:5:0> - <1193:0:0> Idle time after which a TCP connection state
will be closed, default is 1:00:00
<0-0> Specify this value to never time out
DLink (wireless N-300) Why Does Computer Have To Reset Router Every Minute
Apr 23, 2012I have a dlink(wireless n-300) router going through a netgear wireless g router, i have an intel wifi link 5100 agn in my acer aspire 6930g laptop & the isp is high speed cable (Shaw cable). My question is, why does my computer have to reset the router every minute or so? It takes forever to get anything on the web which could be Bitdefender 2012 plus security?
View 1 Replies View RelatedCisco VPN :: 10 Minute Time Out WebVPN On 1921 Router?
Jun 9, 2013We have a 1921 router that has WebVPN (Any connect) enabled on it as well as IPSEC. When a user logs in using IPSEC client they stay connected no issue. IF you connect using Any Connect it will disconnect you after exactly 10 minutes. Never a second more or less. I ran some “debug webvpn” and the disconnect looks to be a planned event and reports no error it just sends the disconnect command. However, if you watch the buildup you get the following message from Debug.
003960: Jun 7 09:09:06.833 NewYork:
003961: Jun 7 09:09:06.833 NewYork:
003962: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] CSTP Version recd , using 1
003963: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] Allocating IP 172.18.249.50 from address-pool IPRange1
003964: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] Using new allocated IP 172.18.249.50 255.255.255.255
003965: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] Full Tunnel CONNECT request processed, HTTP reply created
[code]....
The highlighted entry is a session timeout set for exactly 10 minutes. I cannot find how to change, remove, or modify this setting. Google has failed me in my ability to find this timeout setting.
Cisco Routers :: SRP547W Dropping ADSL Every Minute
Feb 22, 2012We installed one of these devices as our gateway a couple of weeks ago, flashed the firmware to 1.2.4(003) and it worked perfectly until this morning where it keeps resetting the ADSL every minute and losing the web interface to the unit.
The log endlessly reports this:
Feb 24 11:26:00 SRP547W cron.info cron[8779]: (root) CMD (/sbin/check_gn)
Feb 24 11:26:00 SRP547W cron.info cron[8781]: (root) CMD (/sbin/check_ps)
[Code].....
Cisco VPN :: 1841 IPsec Tunnel Protocol Down After A Minute?
Apr 23, 2013I have a strange issue where im able to get an ipsec tunnel from tha cisco 1841 to a linksys/cisco RV016 for about a minute and ping/encrypt packets across the lin for about a minute before it goes down. I tried various configuration and it all results in the tunnel coming up for a minute then going down. I'm not sure if im hitting a bug and on which decide of if im doing something wrong.
RV016 firmware 2.0.18
cisco 1841: C1841-ADVENTERPRISEK9-M), Version 12.4(24)T
my config
no crypto isakmp default policy
!
crypto isakmp policy 1
encr 3des
hash md5
authentication pre-share
group 2
[code]....
Cisco WAN :: Periodic Slow Response 2821 (300+ms / 1 Minute)?
Mar 10, 2011Periodic Slow Response 2821 (300+ms, 1 minute) My solarwinds NPM reports very slow response times from my satellite clinic.Often times it is 300ms to 600ms when it should be 10-15ms. CPU does not seems to spike, the memmory does not seem to spike The bandwidth does not spike.It happens mostly during work hours about 10 times a day Solarwinds reports the delay and then 2 minutes later it reports normal activity
I have broadcast/multicast control on the switches? We have static route for our network meaning no routing protocols ?We have 12 other clinics with the same configs and they are fine?I have double checked the configs but I am not holding my breath on that item?I have rebooted the router without affect
I have not replaced the cable to the demarc on either side of the WAN connection?I have not reseated the service provider T1 cards?I have not reseated the T1 card on either router.
Linksys E-1200 - Wireless Connection From Desktop Dropping About Every Minute
Mar 22, 2012I just brought home an older desktop and my wireless connection seems to disconnect about every 30 seconds to a minute, then reconnects.
The only other devices that we are using wirelessly are our phones, which we never notice a problem with. When it is connected, the signal stength is excellent. It just keeps dropping. Speed 72.0 mbps.
I am using a Linksys E-1200 wireless N router, and a Belkin N150 USB adapter.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 4 Stepping 1
[Code].....
Acer Laptop - Internet Connects Manually But Drops A Minute Later
Jun 4, 2011I have a window 7 acer laptop, 3 as a matter of fact, i just upgraded to charter high speed internet and i have this new router its called ubee router/modem i have no trouble with my window xp with the wire less connection, but on the 3 windows 7 computers they will drop or lose the wireless conection and we have to refresh the network and it will do okay untill its shut off and it might connect, charter. If i use a direct cable no problems at all. even if i set the router up with no wepkey it will still drop wireless umm what could i do to correct this
View 1 Replies View RelatedD-Link DCS-942L :: Change File Size To Other Than 1 Minute Chunks?
Aug 9, 2012First is it possible to change the length that new files will be created? Right now it creates 1 minute chunks which becomes a pain in the butt to manage. I would really like to set the length to 10min or even 60min chunks as one minute is just to short. I use the camera for constant recording and do not plan on puttin in a computer to record to due to logistics.
Secondly, is there software that will manage these files? That is pull down from the cameras SD and archive then allow you to simply play from any location via mouse or time picker?
I have used professional security systems in the past and know that this is just an entry home consumer camera but was hoping it had a little more functionality, as it stands the built in SD recording is almost useless without some sort of management software.
Cisco WAN :: 1941 - Why 5 Minute Input / Output Rate 0 Bits
Nov 23, 2010when i type "show interface" command on 1941 router, shows below print. Why 5 minute input-output rate are 0 bits? Can it be a bug?
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
304015 packets input, 151607798 bytes, 0 no buffer
[Code].....
Linksys Wireless Router :: EA3500 Dropping Internet Connection Every 2 Minute?
Apr 12, 2012 I've recently purchased the EA3500 dual band wireless-N router to replace my old and somewhat tired WRT54GS. The old router worked, I just decided to upgrade to wireless-N since all of my devices are now capable.My ISP is Comcast and I use a Motorola SB 6120 cable modem. After an extremely easy setup of the new router last week, I experienced one full day of glorious speedier network and internet traffic. However, roughly 24 hours after installation I started experiencing intermittetent internet connectivity issues. As in - the cable modem is accessible for 2 minutes and then can't be found for 2 minutes, repeat forever.
After multiple different troubleshooting steps, including rebooting both the modem and the router together, separately, and releasing and renewing the router's IP Address through the router's admin page, I finally ended up resetting the router back to factory defaults and letting Windows 7 guide me through the re-installation rather than using the provided "easy setup" CD from Cisco.
This seemed to have worked, but 2 days later, my "every 2 minutes" issue returned.
Something important to note here is that all of my devices - both wired and wireless - are able to communicate with each other without issue. For example - while I have no access to the cable modem, I am able to stream music from a wired desktop through a wireless laptop to a wireless receiver connected to my TV. I am also able to access the router's admin tools during my connectivity issues.
Routers / Switches :: Connect Modem To Wireless Router / Modem Combo?
Aug 23, 2011My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies View RelatedConnect Tata Photon Modem To Bsnl Wifi Modem Via Usb Port?
Jan 16, 2013I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies View RelatedSetting Up A Modem / Router Combo (D-Link DSL2730-B) As A Dedicated Modem?
Feb 28, 2013i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
Only One PC Keeps Disconnecting From LAN / WAN?
Sep 14, 2012I got a new gigabit router to up grade my old one in my current home network. The old router worked with everything including the problem PC. The new router works with everything (wired and wireless) except one PC.
To narrow it down I connected only that one pc with a wired connection to the router, removing all other devices. The problem still exists, so it's either a router or pc issue.
The pc will connect fine and I can access everything on the LAN and internet for about 5 min. Then I get limited connectivity and I need to do a release/renew to get the connection back.
While the PC is dropping all other devices that I connect to it work fine with no interruptions (wired and wireless).
I tried reseting the router, reinstalling NIC driver, setting a static IP, and messing around with the speed and duplexing options on the NIC. I plug in the old router, the pc connects with no issues.