Moved NAS On Network And Now Can't Access It?
Sep 10, 2012
I have 2 NAS devices on my network (NAS1 & NAS2). Both are QNAP devices that hold files for sharing and backup. The network operates DHCP but the printers and the two NAS devices have static IPs.I have to move them to a different room, so I did NAS1 first. I logged on to the web-gui and chose the option to 'shut-down'.Then I took NAS1 into the different room, connected it to the network and it all powered up and i see green lights and the network light is on and all looks fine.However when I try to access the device using Windows Explorer (the same mapped drive) or if i try to access it view the web-gui of it's static IP, it says that the device is not found.?
View 8 Replies
ADVERTISEMENT
Jun 14, 2012
To start off, I work for a small business where we do not have an IT department
One of our users changed his domain to a workgroup (made us rethink who has admin access on all our PC's) thinking that it would somehow fix the problem he was having with not being able to print anything to a network printer. Well, this promptly called for a restart and upon restarting would not allow him to log back into the user account.
This all makes sense to me as to why it will not let him log-in using credentials that he is no longer a part of due to security restrictions. But my question is how do i recover the account? In other words, how do I go about rejoining that user account to the domain that everyone is located on.
If all new user accounts are defaulted to join the domain, how come its not just as easy to move a user from a workgroup back to that domain?
Also, the machine is running Windows XP. It's critical that I get the old user account set back up because it was used for Outlook e-mail as well as several important documents/spreadsheets. I know that none of these files are lost as I can still navigate to them through the Local Disk. But really I would like to get the old user account working instead of having to copy/paste all the old content to a new user account in order to hopefully retain all old settings and configurations. tl;dr A user on our domain moved his user account to a workgroup and now is unable to login or access his user account. How do I move the user account back to the domain?
View 4 Replies
View Related
Feb 18, 2011
.I modified my hosts file one time in order to get a website that wasn't working because it moved IPs....I inserted the website's IP address in there, since that was what someone else told me to do. There was also one other website I couldn't visit, and cannot even now...the website name is animefansftw.com (lol i'm a nerd xD) and so....I was thinking maybe that had something to do with me tampering my hosts file. I want to restore it, but I don't know how to do so.
View 3 Replies
View Related
May 13, 2012
My laptop's internet connection was doing very fine a long time ago. But once time, I went to my brother's room to use it and then i came back to my room and it works very slow until now. I don't know why it happens because the other laptops in my house are doing fine, only my laptop's connection is slow.
View 14 Replies
View Related
May 13, 2012
My laptop's internet connection was doing very fine a long time ago. But once time, I went to my brother's room to use it and then i came back to my room and it works very slow until now.I don't know why it happens because the other laptops in my house are doing fine, only my laptop's connection is slow.My friends suggested that I should change the internet channel. The sad thing is I don't know how to do it and is it legal?
View 10 Replies
View Related
Apr 13, 2011
Actually I have a shared printer in network and when some user tries to access that printer of machine name \venus an error occurs netlogon service is not started.I have tried to start netlogon service on both machine (Printer server and client) but some machine in network can able to access that machine (\venus) but some machines gives error "NETLOGON service is not started"
View 14 Replies
View Related
Aug 28, 2012
i use HG530, and i am connected to internet by lan1 out of 4,,, in last time my modem restart itself,,when modem work, first 2 lights (power and ADSL) are on and 3rd (internet) is flashing, when modem resets, first light is on second ligt is flashing and 3rd light is off,,, i tried to change cables and everything, but when i move cable from Lan1 to Lan2 or Lan3 i cant connect it says unidentified connection,,so how can i repair that,, and also technical support told me that my electric power is low and it cause modem to reset, is there any way to prevent that from happening if thats true?
View 10 Replies
View Related
Jan 12, 2012
Windows Server 2003, XP and W7 desktops. I have a growing number of user folders that are seemingly in the wrong place. When I am looking at the directories locally on the server, there are some document folders that are directly in the Users folder, rather than existing as subfolders within a user's folder. In fact, the user's folder is not present at all. So rather than Joe Smith's folder structure being 'Users/jsmith/', there are a series of folders under 'Users' that are named 'Documents'. As I click on each one though, I see in the address bar 'Users/jsmith' etc. In the tree, there is no folder named jsmith, but in the address bar there is. And in the address bar, there is no folder named 'Documents'.This seems to be limited to newer users and older users who have Windows 7 PCs, but I don't know for sure if that's the source of the change.
View 2 Replies
View Related
Feb 19, 2012
where is the following CAT to IOS configuration for 6500 page moved? I am unable to find this utility? url...
View 2 Replies
View Related
Feb 17, 2011
I have a problem with a direct crossover Ethernet connection between two computers. One is a Win XP laptop, the other a Win 7 64 bit desktop. I have a USB adapter on the desktop and the laptop used that to share internet with the desktop. This setup worked fine until today. There have been no network hardware changes nor software changes but the desktop's power supply recently failed and had to be replaced. After that was done I tried today to plug the adapter and cord back in and use the connection but it will not work. The connection from the modem to the desktop works fine but the connection from desktop to laptop will not detect internet access, says "Local area connection doesn't have a valid IP configuration" and has limited connectivity. Other than a new power supply absolutely nothing has been changed.
View 7 Replies
View Related
Dec 1, 2012
I recently moved to a new location with a dsl modem and transferred my macbook and lynksis router E1000 v2.
View 3 Replies
View Related
Aug 5, 2012
I was successful in configuring a new e1200 in bridge mode to extend my network. I did this with the routers side by side. In then moved the e1200 to a new location 150 feet away and it will not work. I previously had this working with an older linksys router. It will not deliver a Internet connection.
View 8 Replies
View Related
Jan 26, 2012
i would like to know that how to stop internet access through network complete internet access
View 2 Replies
View Related
May 7, 2012
I have created remote access vpn in my ASA 5505. The tunnel is established but i am not able to access the internal network.
View 3 Replies
View Related
Apr 4, 2012
I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies
View Related
Oct 8, 2012
i can search for networks. As you can tell i am currently on the internet on my laptop. I can search for the current network i am on through my adapter. I then connect to it. It says im connected to a unidentified network. It will not let me search the internet or anything else.
View 9 Replies
View Related
Aug 15, 2012
I currently have a BT Home Hub 3 router and an Ubiquiti Power AP N.What I am trying to do is use the Ubiquiti access point as the main device for all connections in my house (ethernet and wireless) so that I can use the QoS settings etc. I basically want the Home Hub router to play as little role as possible in the network except for providing the ADSL internet connection.I know I need to enable DHCP on the access point but everytime I do so the devices connected to the access point lose internet connection.(BTW I have an ethernet cable connected from one of the routers LAN ports into the access point's WAN port)
View 2 Replies
View Related
Feb 8, 2012
i have an internet connection thrw USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible
View 2 Replies
View Related
Jun 30, 2011
I have been using a laptop to stream videos through my xbox for over 2years until recently. I setup a wireless network in the house to do this. All was fine until 3 days ago.I use a Dell Inspiron 1545 with Windows 7. I have a Dell Wireless 1397 Minicard, a cisco router (model #2425). Since my laptop was infected by Malware, my network has not worked since. I downloaded Malwarebytes Anti Malware to get rid of it and it appeared to work. I got internet access back. However, I still cannot connect to my network (visible in the Available Network list as normal) or stream any media.Windows Media Centre also has stopped opening and gives me the small box saying 'windows is checking for a solution', then closes with nothing. I can however open WMC if I right click and 'run as administrator'?! I have disabled all other network adaptors, only the Dell minicad is enabled and also tried disabling and enabling this main one with no effect. All problems point to the fact that my laptop can no longer connect to the home network but I cant figure out why?!Another (possibly unrelated) problem is occuring at boot up where I get an error message saying 'Bluetooth Software License not found. [2]' - Again this never happened before the Malware infection.
View 1 Replies
View Related
Aug 30, 2011
I have bought a new laptop and added it to my home network , two pc's and two laptops all running win 7. I share all drives on all machines. I know this is not very professional but it works for me.From the new laptop I can see all the network and see all the different drive folders but can only access the user folder on any PC from the new laptop. Also I can see the drives on the new laptop but only access the new laptops user folder from any other PC. I have checked this through a LAN cable and wireless with no difference.As the other PC's can see each other as normal I can only think there's a problem with the set up in the new laptop. I also note when I first try and access any other pc from the new laptop I am asked a domain name and password , I can put anything in these boxes and get to see the network but as I said above only access the user folders. I do have password access turned of.
View 7 Replies
View Related
Mar 29, 2011
i want to know how to access printer remotely,mean when the user is not in the network. .in domain network
View 1 Replies
View Related
Nov 8, 2012
I was able to access my website jetbaby.com just fine before I changed the cPanel password. Now I cannot even load the site or load the cPanel login page here: jetbaby.com:2082 All I did was change the cPanel password. When I use another computer that is NOT on my network, I can connect to the site fine. I'm assuming that my network is blocking it for some reason after the cPanel password change. I tried the IP address in the address bar as well (still no go). Cannot "ping" the IP address either. I reset my modem and router as well. Cleared cache in browsers as well. I also disabled firewall and anti-virus for testing.
View 2 Replies
View Related
Apr 9, 2013
I split my network into 2 to make it more accessible during peak time and to minimize internet traffic. However by doing this only the first network can access our Network Access Storage, the other network can access it because the two are separated by different router and switch also the supervisor need to see both network at the same time for monitoring purposes..
View 6 Replies
View Related
Aug 29, 2009
I just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1. My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
I found directions in the forum for a setup using the LG BD390 but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi.
View 3 Replies
View Related
Dec 5, 2011
My problem is that I am working for a small company that rents an office in a building. The building itself has its own static, public IP address with a very good quality of connection. However, I cannot access my computer from the outside, since the Owner of the building didn't allow the network Guy to forward few ports to my router. They offered us some public ip addresses which cost about 3x more than when you get it for a home connection. It's way too expensive. Now my question is that - what could be done to still access the computer/router. I should mention, that we already own a room in another place, where we have our private server with public ip. I have already tried to set up an ssh tunneling (ssh tunnel was set in that another place) and it worked, however it introduces delays. Is there any lightweight solution to my problem, like something that could use that another-place-server just to connect the client, and then server redirects the client to the created socket - also without any encryption.
View 4 Replies
View Related
Jan 17, 2012
I have a toshiba laptop and I am having troubles with the network access. I dont know what I did but now my internet is not connecting to there. It works with my other laptop though. I think I have to change the wireless properties or something.
View 1 Replies
View Related
Jun 1, 2012
I connect to my network and the at the top it says "unidentified network, no Internet access". I've turned off and reset my modem and my computer.
View 4 Replies
View Related
Sep 6, 2011
I have a linksys router / internet gateway with about 5 ports. The internet works when connected directly to one of these ports, but when I connect this port to a Trendnet hub and my laptop to the hub also, then the internet stops working. Yesterday afternoon I plugged in one of these hubs (usually disconnected for this reason) and it worked all afternoon, but at night, I could not access the router. I could, as said access the router via the direct connection.
When I was younger, I remember that some hubs had an uplink port on them aside from the normal ports. This hub does not have one of these. I am wondering if someone firmiliar with networking knows why this could be happening - is it just a bad hub? I am presently using the same brand and model hub at my work and it is fine, so why would I buy another hub?
View 5 Replies
View Related
May 28, 2012
Yesterday my computer acted like it froze up. After a few minutes it seemed to be OK but now I notice a red X in the lower right hand corner next to the speaker iconThe only time I have noticed this "X" before is when the internet service is down.My internet service is fine.
View 11 Replies
View Related
May 5, 2012
They can connect to the VPN and I can see incoming connections, but they can't access network shares. I mean they don't see them, and in network connections it says NO INTERNET CONNECTION.
View 1 Replies
View Related
Feb 18, 2011
One min internet was working then 0 Thought might have been an update so tried a system restore no luck.other pcs are connected to router wireless mine is a wired connection no network access belkin 54g nivadia n force network controller. [code]
View 14 Replies
View Related
Jul 14, 2012
Okay, I have a Netgear wireless router that prior to today was working fine. Earlier my wife was trying to access the network and it was nowhere to be found. Then after I restarted the computer I saw the network with poor signal strength then after a minute or two I couldn't see it. Next, I pressed the reset button on the back of the router and gave the router the default settings of wpa-psk, changed the wireless name and created a new pass phrase. After that course of action I now see my network with strong signal strength. I enter the passphrase to logon and I get a message stating that Windows cant access this network. Also, I read online I could go to the manufacturer and update the firmware but I haven't done this manually since I've had the router 08?
View 9 Replies
View Related
Oct 6, 2011
Access Security DVR Outside Network? We are trying to get a Swann DVR4-1300 to work with our iPhones outside of our LAN.
View 1 Replies
View Related
