Why Can't Access Wireless Network
Jul 14, 2012
Okay, I have a Netgear wireless router that prior to today was working fine. Earlier my wife was trying to access the network and it was nowhere to be found. Then after I restarted the computer I saw the network with poor signal strength then after a minute or two I couldn't see it. Next, I pressed the reset button on the back of the router and gave the router the default settings of wpa-psk, changed the wireless name and created a new pass phrase. After that course of action I now see my network with strong signal strength. I enter the passphrase to logon and I get a message stating that Windows cant access this network. Also, I read online I could go to the manufacturer and update the firmware but I haven't done this manually since I've had the router 08?
View 9 Replies
ADVERTISEMENT
Apr 4, 2012
I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies
View Related
Apr 2, 2011
I installed a new wireless NetGear router. From this router I have a second router in another area of the house as a signal booster different SSID. I can access both netwoks on my iMac. iPhone and iPad. I can access my Net Book and Laptop #1 on Router TWO but not Router ONE. From Laptop #2 I can't access either wireless network.
View 2 Replies
View Related
Jan 26, 2012
i would like to know that how to stop internet access through network complete internet access
View 2 Replies
View Related
Aug 2, 2012
About a month ago i was able to create ad hoc wireless network to connect my iPod to wifi. And then not to long ago, i had some kind of virus problem which caused me to get Norton 2012. But now when i try and create a wirless network it says that there is no internet access. But i use my laptops internet with a yellow wire connecting from my laptop to my modem. And the interent works perfectly fine. So i do not know why my interent wont allow me to use a wirless network.
View 1 Replies
View Related
Dec 27, 2011
I need to control his access to the internet. How can I set up a password to control access to our home wireless network? I have just noticed that our wireless network is not showing as secure.
View 1 Replies
View Related
Nov 26, 2011
I just replaced my wireless router. Wh? Now I'm not sure, I hoped a dual band router would give me better range. True or false?Regardless, I installed my new router but can only connect to my local network on my home laptop. However my work laptop connects to the same network and internet with no problem. SO does my husband's work computer.Any idea what the problem is? Other weird thing is that I have some random unsecured network that keeps popping up and my computer keeps automatically connecting. I've tried to remove it every way possible and it keeps coming back?
View 1 Replies
View Related
Jun 19, 2012
I have a Linksys EA4500 setup on my corporate network for wireless access. I have enabled the guest network and from all I can tell it's on a seperate subnet from my internal network like it should be. 192.168.x.x My internal is on a 10.x.x.x network. I conenct to the guest network using a laptop and I'm prompted for a password to get to the internet, which I like. The one issue I'm seeing is when I'm connected to the guest network I can still do an RDP session to internal resources. How is this possible if the guest network is on a seperate subnet?I take a laptop which has not been joined to my domain, connect to the guest ssid, and then open an RPD session and enter an IP address for an internal server and it connects. Is there a setting to keep this from happening
View 6 Replies
View Related
Jan 4, 2012
I had to change the power adapter on the D-Link ( DI-624 ) and since then the other computers cannot access the internet connection
View 1 Replies
View Related
Jul 3, 2012
We have a task of setting up 2 new WAP in our office. We have connected them to the network ethernet port and we can all connect which is great! However I need to change the wifi name and add security! Our server has DHCP.Everything I have seen online only refers to home network where the address is 192.168 etc..
View 3 Replies
View Related
Feb 29, 2012
my primary source of internet at my house for the passed year is an at&t 3g usb modem (sierra wireless lightning), becuase i live in the middle of nowhere (only other option is satellite). Up until now i've been using a wireless ad hoc network to share the connection with multiple computers. I just purchased a cradlepoint router that is compatible with my usb modem so I can have a "real" wireless network in my house. I set it up yesterday and so far its working great, I have a wii streaming netflix, an android tablet, an iphone and two laptops (running vista, and win7 respectively) currently connected. The problem is my 3rd laptop, also win7. It is my primary computer that I use for business and absolutely essential that its connected to the internet. It (seems) to connect to the wireless network just fine, but gives me a "no internet access" error.
This laptop will connect to other wireless networks: it always connected to the ad-hoc, it will connect to my wifi at work and the network at my boyfriends house, also i just tried it with the verizon 3g mobile hotspot app on my droid and it connected right away. It also works just fine with a wired connection to this router (ethernet). I'm not sure where to start since every other device in my house is working with this network and this laptop will connect to other wireless networks.
ps/ Going through the windows onscreen troubleshooter it will either tell me "there is a problem with your broadband modem" or "There is a problem communicating with DNS server" (but it wont fix it)... and after going through endless google searches, i've done everything thats been suggested so far (making sure dhcp is enabled, powercycling the router/modem, updating drivers, ipconfig release/renew, disabling the firewall).
View 18 Replies
View Related
Apr 24, 2011
i just hooked up a dlink router at home so i can use my laptop in different rooms. i have a desktop in one room and the internet works fine but when i hooked up the wireless router i can connect to the network but it says no internet access so i cannot get online my brother in law is really good with computers and i called him and tryed doing a bunch of different things like changing the web address and such but nothing will work.
View 4 Replies
View Related
Nov 21, 2012
has a netbook which on this one, the network is not working. He connects to the wireless router and gets an ip but he does not have access to the internet.When I tried the netbook at my house with my wireless, it worked perfectly and it stopped working again on my friend's network.
View 7 Replies
View Related
Nov 20, 2012
When I moved in to my roommate's house, her computer was already set up with an unsecured wireless network listed as Open and Disabled requiring no password. All of a sudden, it now has a lock next to the name in the list of wireless networks and asks me for a password when I try to connect. My roommate knows NOTHING about computers and has no idea how it happened. She has an Arris modem, Windows 7. I tried typing in the common IP address for Arris and I did get to a screen giving a lot of info about the system. But there was no where to log in or change any passwords.
View 9 Replies
View Related
Feb 24, 2012
I am using a Macintosh (Lion) on a wireless network. I want to print to a printer on land line ethernet. I have the printer's IP address. I attempted to add the printer on the Macintosh using first LPD protocol and then IPP protocol. Neither worked.I chose Autoselect to select the driver and it would revert to Generic PostScript Printer.When I selected Add, screen said "Setting up " with the IP address for a while and then said "Unable to verify the printer on your network"
View 4 Replies
View Related
Jun 23, 2012
My windows 7 desktop computer is giving me a "Limited Access" notice when i try to connect to my network. My laptop on the other hand can connect to it easily. I've tried several solutions that I found online, but nothing has worked yet. When I run command prompt ipconfig I get
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJeffrey>ipconfig
Windows IP Configuration
C:UsersJeffrey>ipconfig /all
[code]...
View 9 Replies
View Related
Jun 17, 2011
From one day to another my internet stopped working, instead of connecting automatically it shows limited access. I tried typing in cmd and IPCONFIG/ALL but that doesnt work either. using non-technical language, I am really bad with computers.
View 2 Replies
View Related
Oct 12, 2012
I suspect that he did something and gained remote access to my computer.I found out about it when I checked my wireless connections on my router and found his name on the network : Steve's - Iphone and a couple of unfamiliar connections. I then opened my task manager and ended some tasks I thought were possibly infected. When I went back to the wireless status, the unfamiliar connections disappeared.
I use Norton firewall + kaspersky internet security and my virus definitions have always been up to date, but I cannot detect anything. I also set my options to permit only MAC authenticated computers and changed my wireless WPA/WPA2 key, but every time I turn my wireless on, this guy somehow is connected to my network. [code]
View 4 Replies
View Related
Jan 21, 2011
Wireless network is connected but no internet access
View 2 Replies
View Related
Jan 22, 2013
We have a wireless router, (Dlink DI-524, a couple of years old, and all the cables), and I have a basic knowledge of networking, such as DHCP servers and so on, but I don't know how to set it up. We have a working LAN port, so access isn't a problem. And we know the server address. As much as we'd like the IT dept. to do it, or to at least tell us how, they're unbelievably lazy and won't do either.
View 2 Replies
View Related
Mar 11, 2013
We have two WLC 4402 WLC in active-active mode in our setup. The issue we see is that a user/laptop gets connected and gets the ip address but there will be no network access. We see a yellow exclamation sign at this time in network icon in tray and we can not ping gateway at this point. We have run debugs at this time for the machine and we could see that was in "RUN" state its only that the machine can not access network.
View 11 Replies
View Related
May 7, 2012
I have created remote access vpn in my ASA 5505. The tunnel is established but i am not able to access the internal network.
View 3 Replies
View Related
Oct 16, 2012
it is each wireless access point need to have different subnet, if 24 users connect at the same time? will it be slow down if 24 user put in the same network?
View 1 Replies
View Related
Dec 23, 2011
can connect to the network but not the internet. In IPCONFIG it says media is disconnected. In properties it says adapter is not connected. But I can see the network, I can ping every computer on the network, just can't get to the internet.Reinstalled all the drivers, tried renew, netsh commands, flushdns, disabled & reenabled. 2 other computers connect to the internet and each other with no problem. Can connect to other WI Fi's too, but still no internet access.
View 8 Replies
View Related
Jun 20, 2011
Why can't I see my truemobile 4350 network access point? I have two cards on my laptop one works fine with one (netgear) access point. The other worked until I re-booted my system, now both cards connect to one access point and I can not even see the second access point.
View 3 Replies
View Related
Dec 1, 2012
When I try to connect to the Internet it says that I am connected but have no Internet access. When I use the troubleshooter it says wireless network configuration does not have a valid ip configuration. I also tried using the Ethernet cable but it still says no Internet access.
View 8 Replies
View Related
May 24, 2011
I recently purchased a android tablet and want to access my wireless connection through my network. When the tablet recognizes my network but when I enter my router password it wont accept it. I have reset the router back to default and reset a new password and it still will not accept it.
View 4 Replies
View Related
Jun 23, 2011
I can not connect to my home wireless network (we did change routers back in Dec and did at that time have problems as well getting it to connect) the router is a Linksys E2000.when I checked further I saw that the IP address was different than the ones on my other laptops so I changed those settings by adding the new IP address..
[code]...
View 1 Replies
View Related
Nov 3, 2012
Two days since i had a power shutdown in my building so i had to disconnect both the modem and the routerfter i reconnected them my wireless network is shown and i can connect through my hp laptop but it keeps showing the Message "unidentified network not internet access". Other laptops and my ipod have no problem at all. I've tried following some tutorials that told me to disable and enable the network, i've checked that my ip is obtained automatically.
View 1 Replies
View Related
Apr 16, 2012
i have a Toshiba Satellite A215 with Windows Vista Home Premium. The laptop has been running on my wireless network for several years with no issues. For some reason I can no longer access the wireless network/Internet but can through the LAN (cable). I have other 2 other computers (Dell desktop and iPad) that are running on the wireless network so it just seems to be the Toshiba laptop that is having the problem. I have not done anything new to the network router or the Toshiba and am not sure why the Toshiba all of a sudden no longer does not have wireless access. The devise manager says the adapter is functioning properly. I have looked at other resolved issues on your site that have had this issue but have not been able to resolve my issue. As requested with other similar issues here is the ipconfig for the Toshiba.
View 3 Replies
View Related
May 27, 2011
access network but cannot get online without turning on laptop
View 1 Replies
View Related
Apr 11, 2011
I have recently purchased a new laptop (less than a week ago) and since purchase I have had the same recurring problem. Coincidentally, my wireless router is brand new also, and so it makes the situation even more difficult to eradicate. My laptop connects to the router wirelessly without a hitch, however, every five minutes or so, a small yellow exclaimation mark appears alongside the 'connection symbol' and it says there is either 'No Internet Access', or 'No Network Access', despite the fact it is connected to the wireless and has a full strength connection. However, my brother's laptop connects and surfs the web seamlessly, as well as the family desktop PC and various mobile devices. I am reluctant to return the laptop back to the store?
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: AMD Athlon(tm) II P360 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 2811 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series , 256 Mb
Hard Drives: C: Total - 152621 MB, Free - 118639 MB; D: Total - 152221 MB, Free - 144186 MB;
Motherboard: TOSHIBA, PWWAE, 1.00, 0123456789AB
Antivirus: Norton 360, Updated and Enabled
View 12 Replies
View Related
Aug 27, 2012
Just to set the stage, we used to have a network which ran in the following order:
For wired workstations: bridged DSL modem->wireless Linksys E900 router->Dell PowerConnect 2824 switch->2 modular 4-port jacks->individual workstations For wireless: bridged DSL modem->wireless Linksys E900 router->workstations The workstations were set up to pick up IP addresses automatically.After an infrastructure upgrade where we added some Cat6 cables and swapped the modular jacks for a patch panel, we lost all connectivity. I restored the connectivity to the wired workstations by assigning IP addresses. But we have no wireless and I cannot access the router GUI at its IP address (even when plugged directly into the router). All the workstations show the default gateway as 192.168.10.1, so I don't know what's going on.
View 3 Replies
View Related
