Connection To Wireless Router Is Fine But No Network Access?
Apr 11, 2011
I have recently purchased a new laptop (less than a week ago) and since purchase I have had the same recurring problem. Coincidentally, my wireless router is brand new also, and so it makes the situation even more difficult to eradicate. My laptop connects to the router wirelessly without a hitch, however, every five minutes or so, a small yellow exclaimation mark appears alongside the 'connection symbol' and it says there is either 'No Internet Access', or 'No Network Access', despite the fact it is connected to the wireless and has a full strength connection. However, my brother's laptop connects and surfs the web seamlessly, as well as the family desktop PC and various mobile devices. I am reluctant to return the laptop back to the store?
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: AMD Athlon(tm) II P360 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 2811 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series , 256 Mb
Hard Drives: C: Total - 152621 MB, Free - 118639 MB; D: Total - 152221 MB, Free - 144186 MB;
Motherboard: TOSHIBA, PWWAE, 1.00, 0123456789AB
Antivirus: Norton 360, Updated and Enabled
View 12 Replies
ADVERTISEMENT
Dec 17, 2012
Recently installed a new CISCO DPC3825 and set up for wireless. I can connect to the network, signal strength excellent, but NO Internet. i have read a few threads showing similar issues, but i am getting lost when i try to troubleshoot further. i ran a command 'ipconfig/all' and got some data. I am confused also as under my network adapter it says 'media disconnected' .
View 1 Replies
View Related
Sep 11, 2012
I have a WRT120 wireless router that works fine, but the wired connection has failed. I have restarted the modem, router and the computer and still doesn't recognize the wired connection.
View 9 Replies
View Related
Dec 20, 2010
Recently added a NookColor to my toys. Works fine except at home. The device shakes hands with the router but won't connect. Nook connects seamlessly with every other network I've tried. Had my Bro-in-law over with his Anfroid based mobile devices and they won't connect either. We currently are running 4 boxes (2 @ desktop and laptop) off this router with no problems.As near as I can figure the latest firmware update (2007) can't handle the Android OS protocol and while they recognize each other they won't speak or play nice.Any options y'all know of short of replacing the router with a shiny new one ?
View 5 Replies
View Related
Mar 1, 2011
connect new computer running windows 7 to small peer to peer network...modem to connect to interenet is speadstream 5660...network works fine but cannot access internet...i works great in my office with a different modem...i can access the windows 7 computer remotely using go to assist also...trying to find out if there are issues with windows 7 and the speedstream 5660 modem...
View 2 Replies
View Related
Apr 12, 2012
We have FIOS at our home. All the wall connections for ethernet are wired to the control panel in our house which are then connected to a wired router. We have another wireless router in the upstairs which gets internet through the wall port and it works fine.We had another downstairs wireless router in the living room that was working fine as well, but I reset it for certain reasons and it no longer works properly. All the proper lights light up: internet, port, power but the computer can only connect to the network and not the internet for some reason.
View 9 Replies
View Related
Feb 16, 2011
I had to reboot my Dir 655 because my 2 wireless laptops wouldn't connect to the internet. Once I reset all of my static IP settings in the dlink admin tool the wireless laptops work fine. The problem now is that I can't connect to the internet on the computer that is hard wired into the router. I recall once before having to adjust the TCP/IP settings in the Network settings, but don't remember exactly what it was the I had to do.
View 15 Replies
View Related
Mar 6, 2012
my machine is set up to dual boot Windows XP Professional Edition and Windows 7 Home edition. I had Windows XP installed on this machine first because it is 10 years old and I wasn't sure how well it would work with Windows 7. I decided to test out Windows 7 a few months after using Windows XP on here and noticed the wireless network was started right when Windows 7 loaded, where as in Windows XP it can take anywhere from 1-3 minutes for the wireless network to load. In this 1-3 minute time frame on Windows XP any browser or attempted connection to the internet 'hangs' and does not display a time out, it just continues to try and connect until the wireless icon finally shows in the taskbar
View 2 Replies
View Related
Feb 13, 2012
I can go to the public library and log on without a hitch, but at a coffee house or cafe I can not connect. Sometimes it says 'cannot validate..' and sometimes it just says 'unable to connect to wireless network' What gives?
View 3 Replies
View Related
Feb 19, 2013
Nothing seems to be able to connect to my wireless network. It seems to have occurred after I installed a new copy of windows 7 onto my sister's desktop. A message appeared saying we have the same ip address. I've tried renewing our ip address on both desktop but it won't give us new ip address for some reason.
View 14 Replies
View Related
Jun 15, 2012
I have 2 computers that both use the exact same router. The thing is, computer A seems to have major lag issues. I did a shaw speedtest on my computer, most of the time it gives me error messages when trying to scan. On comp B, everything is as it should be.Everything on comp A was working fine last night, and now today i cant even watch a youtube video.
View 3 Replies
View Related
Jul 19, 2011
Recently, my PC has been losing connection to the internet at 1am.It doesnt tell me its lost connection and when i repair the connection it says that it has been repaired - but nothing will connect to the internet and the Zone Alarm symbol stays static instead of its usual green/red activity bars to let me know data is moving in and out.
My xbox is fine all of the time and the other computers in the house are also fine when i checked them at night.- I also checked the ethernet cable from my pc to my xbox to see if that could be the issue - but the xbox worked fine with it.
[code]....
View 7 Replies
View Related
Dec 7, 2011
When I connect to the network, everything is fine for awhile, but then I get Limited Connectivity. It's fixed easily, I just disconnect and re-connect to the network, but I was wondering how I could fix this permanently. The amount of time I have before each time it goes Limited varies, could be 5 minutes to a few hours. And I know it's not the network but my laptop because other laptops connect and have no problems. I am on Windows 7 64-bit[CODE]
View 9 Replies
View Related
Jan 14, 2012
So,I'm living in a university campus and I've got an internet connection via a proxy server.The thing is,when ever I plug in the network cable,my PC recognizes the network,but the little network tray says "No internet access". But the curious thing is that the internet actualy works.My browser works,I can access any website (well,except the restricted ones via proxy) but it works just like any other internet connection in the campus. But,recently I've got my hands on a VPN account to have access to things that my proxy wouldn't allow me (torrents for example).But,probably because of that "No internet access" problem,when ever I try to make that VPN account,it tells me that I need to connect to the internet first. I already am,but my PC still keeps requiring an internet connection.I can't manualy connect to it,since I don't have the ISP data required. I've only got my VPN account data (VPN username and password).
This is kind of annoying,since this only happens to me,my other room mates don't have this problem,they plug in their cables,their network adapters recognize both the network and the internet access. Only mine says "No internet access" but the internet works fine.My operating system is genuine,when ever I go home and connect to my home network this problem doesn't ocure anymore,this only happens when I connect to my university's internet connection.I've tried reinstalling my operating system.Still no results.I'll attach a printscreen so you could see exactly what I mean.
View 1 Replies
View Related
Feb 27, 2013
I work in a small office/production building and lately we have been having problems with an unstable connection. We are using a Meraki MR24 access point in our warehouse, the connection always starts out strong but sooner or later everyone will briefly lose connection and the AP goes away, then comes back and we're reconnected at excellent connection again.
View 3 Replies
View Related
Jan 21, 2013
I can follow directions and am fairly tech-savvy, just don't have the time to troubleshoot this stuff and run my business. Here's the rundown:Router:Cisco Linksys E1000 V2
-working fine until I unplugged to move it and plugged it in
-verified with tech support the problem is not physical
-right now, am hardwired to the router, which is hardwired to the cable modem, and connectivity is fine through hardwiring
-no luck through wireless - this is the error message I get:
This webpage is not available:The server at www.google.com can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network.
View 9 Replies
View Related
Feb 15, 2012
I'm experiencing problems on two cisco switches connected on trunked ports via leased line. The remote site is connected to our main site and I'm getting some weird behavior.Only 2 VLANs are currently trunked and we're experiencing some intermittent connection issues. When sites are connected via trunked port everything works on VLAN 102 and everything on VLAN 101 except there are no internet connectivity, where hosts cannot ping default gateway or proxy.Switches connected are C2960 and C3550 with configuration which was working for 5 years without any issues. BT NTUs does not report any errors and connection seems to be fine. If I interconnect sites via switchport which is on VLAN 101 (staff vlan) everything works fine except student looses the services... because VLAN 102 traffic is not forwarded across the link.
View 7 Replies
View Related
Jul 23, 2011
I have a problem with my internet connection, I live in the university dorm and I connect the internet by wire. When I start the computer on normal mode, the internet is very slowly and sometimes disconnect, and few times just work fine ( doesn't last more than 2 minutes). however, when i put it in safe mode with networking, it works perfectly. Not sure what is the problem.
View 9 Replies
View Related
May 3, 2013
I bought a Kindle whitepaper that uses Wi Fi. Other than going to a free wi fi location to download Amazon books, I decided to buy a router. Everything seems to be ok at the router end I believe. But when I use the wireless feature on Kindle, type in the password I assigned to the router, it always, I mean always, no matter how many times I set up, reinstall the router, and try to log into Kindle storefront using my kindle, Kindle always returns the message "Incorrect Password". Now I don't have a problem with the router. I'll keep it for future wi fi usage. I have done an installation with no password and can then go to Kindle storefront on the Kindle but that is rather insane to not have a password while I am reading books on Kindle. Why the password I assign to the router isn't working with Kindle after I reset the router (using a paper clip method) and reconfiguring with the new username and password like 5 times already? The username appears ok on the Kindle wireless, just the password doesn't work. I'd like the issue resolved before I buy more wireless products. Great router.
Product: DIR-615
Hardware version: H/W Ver.: I1
Firmware version: F/W Ver.: 9.02NA.
View 1 Replies
View Related
Apr 23, 2012
I lost my internet connection after I set my system up for an image backup, left the house and returned. Here’s how my home network is configured:
Cable internet -> Cisco modem/wireless router combo -> Dlink wireless router-turned-switch -> my computer
My computer, which is hardwired, was coming up with a 169.254. My phone, iPad and laptop were still able to connect to the Dlink signal and surf the net with no problems. I connected the laptop to the Dlink via Ethernet – OK. I connected the laptop the Ethernet cable leading to my desktop – OK. So now I isolated the problem to my desktop. I rebooted, released and renewed IP and still 169.254. I went ahead to force a manual IP address and it worked! Reverted TCPIP back to “obtain address automatically” and got a 169.254.
View 5 Replies
View Related
Jan 4, 2012
I had to change the power adapter on the D-Link ( DI-624 ) and since then the other computers cannot access the internet connection
View 1 Replies
View Related
Feb 9, 2012
I have an asa 5585x cluster. I get ssh access but no console access on the standby unit.
On the active unit, when I try console access, ASA ask for a password. I have tried all the one that I have configured, but without success.
View 5 Replies
View Related
Mar 27, 2013
I have a new Dell Vostro 3360 with a Dell Wireless 1703 802.11b/g/n (2.4GHz) card. No internet access (wireless) from my home (other notebooks work perfect). LAN works fine. I have a AVM Fritz!Box 7360SL router at home.
On the other hand, wireless internet works fine at my lab (here : 802.11g, unsecured hotspot). Installed latest drivers and did even a clean re-installation (Windows 7 ultimate or professional) - problem remained.
View 4 Replies
View Related
May 24, 2011
I recently purchased a android tablet and want to access my wireless connection through my network. When the tablet recognizes my network but when I enter my router password it wont accept it. I have reset the router back to default and reset a new password and it still will not accept it.
View 4 Replies
View Related
Feb 7, 2013
Have a v2 E1200. Connect with PPPoE to ISP. IPv4 works fine. With firmware included on router, 2.0.01, it would receive a /64 of IPv6 from the ISP. This /64 would show up under 'status' / 'local network'. Although it did not seem to advertise this space to PC's on my network so I was unable to use it. I updated firmware to 2.0.04. Now it does not even pick up the IPv6 /64 at all.
Anyone have PPPoE and IPv6 working? Anywhere I can download 2.0.01 to try it again?
Is there a model of router that actually works with IPv6?
View 2 Replies
View Related
Oct 24, 2011
i've connected LAN-to-LAN an E1200 to WRT54G to improve wireless coverage in the basement and, more importantly, in the can. the set up seems to work. i also have an airport express joined to the network. (the slaved router's ip is one more than the master and DHCP is off.)i'm still curious about some details of the setup for the slaved router:
-- should it have the same SSID and the master?
-- on the master router, i have WPA2 Personal and a MAC filter of allowed devices. do i need to duplicate those settings on the slave? will it obey the MAC filter and WPA2?
-- do all the routers need to be on the same channel?
-- do all the routers routers need to use the same broadband? the E1200 has N band i'd like to use with the G, if that's possible.
-- if all the routers are on the same channel and SSID, will their signals interfere with each other if they're too close?
View 4 Replies
View Related
Jul 27, 2011
I had the router working fine then last night for some reason it dropped 2-3 (all of them currently on) internet, while online.I can connect wireless just fine to the router but get no internet, when i plugged into the router directly i still go internet, but when i connect the modem directly into the laptop i get internet so it is not the modem. I have tried to reboot the router and modem to no avail.i can access the routers page wirelessly and change stuff but just don't get any internet and the signal strength is excellent.
View 1 Replies
View Related
May 24, 2011
We have a D-Link DI-524 wireless router that has had no problems until today. Our laptops (with Windows XP), iPods, and iPhones all show that there is an excellent wireless network connection (as usual), but none of the computers or devices will connect to the Internet. I tried resetting, rebooting, and unplugging the modem and router. The router and modem seem to be fine. When we disconnect the router and plug the laptop directly into modem, we have Internet connection (i.e., it's not the IP).
View 4 Replies
View Related
Oct 15, 2012
I have a Cisco 1242 AG wireless access point with the goal of having multiple SSIDs. I set up one network which broadcasts correctly but only sometimes can I connect to it.
And, even if I connect to the network, I cannot get a DHCP address for the client.Other devices connected (but not through this Access Point) to the associated VLAN 60 can get a DHCP address and connect just fine.Here is the configuration for the Cisco 1242 AG access point in question: [code]
Lastly, here is the information on VLAN 60 from the distribution switch. As mentioned, other devices connect to this VLAN and get IP addresses just fine.
View 11 Replies
View Related
Dec 1, 2011
There are 2 XBox's in the house and 1 is downstairs wired into the WRT320N Router. The upstairs XBox is running wirelessly through the router. Each of the XBox's work fine playing Modern Warfare 3, when only one is playing, but if both of us are playing, the wired connection works great, while the wireless connection is really slow and laggy. Again, the wireless XBox runs fine as long as the wired XBox isn't also playing MW3.
View 9 Replies
View Related
Jun 22, 2011
My newly installed E1200 only sends speeds of about 16 mbps wireless, but sends the ful 60 mpbs when wired. What is going on. Firmware is up to date. Changing the channels didn't do anything. Is there a way to figure out if the problem is with my laptops wireless card.
View 9 Replies
View Related
Mar 3, 2011
I work at a small business that has an exisiting wired network. Our setup is: Internet > ISP Box > DHCP Server > Switch > Users. I have been attempting to add a wireless router to the network to enable our shop techs to wirelessly access our file computer. I have managed to get the wireless working, but the network was not visible, I could not access any network computers from the wireless, and I could not access the wireless router from our main server. After this I screwed up the settings completely and even a wired connection to the router couldn't connect to the internet. Now I have purchased a WAP54G, but I forsee the same problems when I go to config everything tomorrow.
View 2 Replies
View Related
Jul 7, 2012
I can't connect via wifi to my router, but can connect to the internet with an ethernet cable. However, my other computer connects via wifi without problems. I've gone through my troubleshooting and the wifi light is on, so that's not the issue. I also updated my driver (says it's working fine) and even tried to uninstall and reinstall it. I am not sure what else to do. If I try to connect via wifi though, the computer recognizes all the available networks, including my own, but just won't connect. It says a cable is unplugged (which at that time it is, because it's supposed to connect wirelessly).I have a HP Pavilion dv6-3147sb Entertainment notebook, and it uses Windows 7.
View 14 Replies
View Related
