Cisco Switching/Routing :: CAT To IOS Conversion 6500 Page Moved?
Feb 19, 2012where is the following CAT to IOS configuration for 6500 page moved? I am unable to find this utility? url...
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 6500 How Long Conversion Process Takes Place
Dec 5, 2012We will be converting two 6500s to VSS. Each chassis has a Sup2T module, fwsm, 6908-10G blade, wism1 blades and two or three 6748-SFP blades. I was wondering how long the conversion process takes? If I remember correctly at the 2012 networkers lab it took maybe 10 minutes while using Sup720s. The instructor mentioned that with Sup2Ts it would convert a lot faster.
View 3 Replies View RelatedCisco Switching/Routing :: 3400G-12CS / UNI To NNI Port Conversion?
Dec 2, 2011I am having one Cisco ME 3400G-12CS switch with 4 NNI port & 12 UNI port.I want to convert all UNI port to NNI to as meet my client requirements.which Metro IP Access Image IOS version is required to convert those UNI port to NNI.
View 1 Replies View RelatedCisco Switching/Routing :: Catalyst 3550 / IOS Naming Format Conversion
Jun 11, 2012correlates the older IOS format naming compared with the newer? I have an older catalyst 3550 that might need an IOS upgrade due to us starting to implement dot1x. The reason that I say this is that some of the commands in the dot1x config guide, such as aaa accounting dot1x, are not valid on this platform. The current IOS is c3550-i5q3l2-mz.121-8.EA1c but the newer format is the ipbase, ipservices, etc. format. There is a newer ios but how do I convert from one to the other? I think I need to research the IOS to see if the new commands are there as well as I want to make sure there are no gotchas from a hardware standpoint if I upgrade.
Cisco Internetwork Operating System Software IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(8)EA1c, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2002 by cisco Systems, Inc.Compiled Fri 15-Feb-02 10:50 by antoninoImage text-base: 0x00003000, data-base: 0x006675E0
ROM: Bootstrap program is C3550 boot loader
ACSTMElab-3550 uptime is 20 minutesSystem returned to ROM by power-onSystem image file is "flash:c3550-i5q3l2-mz.121-8.EA1c/c3550-i5q3l2-mz.121-8.EA1c.bin"
cisco WS-C3550-24 (PowerPC) processor (revision C0) with 65526K/8192K bytes of memory.Processor board ID CHK0615V0BPLast reset from warm-resetBridging software.Running Layer2/3 Switching Image
[code]....
Cisco Switching/Routing :: Conversion Tool For Catalyst (6509) To 4500-e IOS Switch?
Aug 15, 2012I have seen links out there for a conversion tool to convert commands on a Catalyst type switch (6509) to newer IOS type switches(4500-e) switches but they all error out on me on a 404. Any link where I can get this conversion tool?
View 1 Replies View RelatedCisco Switching/Routing :: Upgrade 6500 Non Modular IOS To Normal 6500?
Dec 21, 2011how can we upgrade 6500 non modular ios to normal 6500 ios?
View 5 Replies View RelatedCisco Switching/Routing :: 3945 - Connecting To 100M Single Mode Fiber Link SC To LC Conversion
Aug 4, 2012connecting a Cisco 3945 Router to an Ethernet WAN Link. The service provider has provided a 100M Ethernet Single Mode Fiber handoff to the customer premises with SC Connector. The CPE configuration proposed for this setup is like this. [code]
Since the SFP has LC Connector, i suppose i need to have an SC-LC Cable for connecting the Ethernet link. Do i need anything else, apart from above?
Cisco Wireless :: 6500 Not Getting Authentication Web Page From WLC
Feb 27, 2013We're not getting the authentication webpage from the WLC, Normally the webpage would appear with a 1.1.1.1 url and you are presented with the username and password boxes. It authentics those, which are Active Directory credentials , and lets you in.Now we're not getting that page at all just the browser message about unable to display.I've phyically checked the WLC card in our 6500 and lights are green no alarms and I'm able to log on to the WLC as well.I was told someone had rebooted the controller to try to resolve the problem but its' still the same.Is it the case that the web page has just stopped and needs to be restarted some how?
View 3 Replies View RelatedCisco Switching/Routing :: 6500 Switching Fabric Bandwidth 720 Is Calculated?
Jan 21, 2012As per my understanding 6509 all slots are dual channel, so 9 slot * 40 per slot (20 g in and 20 g out) = 360 GB How cisco claim the 720 ?? What about the 6513 chassic switch fabric connection?
View 5 Replies View RelatedCisco Switching/Routing :: 6500 / High Switching Processor Utilization?
Sep 20, 2012I am seeing a strange situation on my 6500 switch?By having snmp walk on '1.3.6.1.4.1.9.9.109.1.1.1.1.3' (== cpmCPUTotal5sec), I came to know that there are two processor and the cpu util for switching processor is gone to 88 % and some time creeps to 99 %.
snmpwalk -v2c -c "removes" sw6500 '1.3.6.1.4.1.9.9.109.1.1.1.1.3'
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.3.1 = Gauge32: 12 (--- this is for CPU of Router Processor )
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.3.3 = Gauge32: 99 (--- this is for CPU of Switching Processor )
but when I do sh process cpu on the console, all looks normal as it shows cpu utilization of RP. why the value is so high on the switching processor ?
Cisco Switching/Routing :: IP Routing On 6500 Series Versus 3750?
Jan 24, 2013For intervlan routing, Is 'IP routing' command enabled by default on a 6500 series switches based on the IOS?and on 3750 switches, do we need to enable the "ip routing" command manually for intervlan routing?
View 1 Replies View RelatedCisco Switching/Routing :: 6500 / Restricting Inter-VLAN Routing?
May 9, 2013I'm looking to restrict Inter-VLAN routing through L3 switch (cisco 6500) and wanted to know best possible way to do it. I used VACL and achieved success to some extent, but my config is making clients take up to 5-6 mins to authenticate IP address from the DNS (bootps).My VACL config was as follows:
Subnet to restrict is 10.100.15.0 (VLAN 15)
STEP 1: Created extended ACL to allow bootpc/bootps through DNS
ip access-list extended EACL_DNS
permit udp any eq bootps any
permit udp any eq bootpc any
STEP 2: Created standard ACLs to allow only relevant subnet, server VLANs & some IPs from other subnets for printers/scanners etc.
ip access-list standard SACL_VLAN_15
permit 10.100.15.0 0.0.0.255 (the subnet I'm restricting)
permit 10.100.50.0 0.0.0.255 (server VLANs)
permit 10.100.25.45 0.0.0.0 (printer in another VLAN which has to have access in VLAN 15)
STEP 3: Created VLAN access list
vlan access-map VACL_15 10
match ip address EACL_DNS
action forward
vlan access-map VACL_15 20
match ip address SACL_15
action forward
STEP 4: Applying VLAN Access list on VLAN 15 vlan filter VACL_15 vlan-list 15 Though the above works, below is noted:
1. I'm still able to PING 10.100.15.2 (the switch virtual interface) from outside the subnet, which I don't intend to do so. Howeve all cients in the subnet have no connectivity from outside the VLAN 15.
2. As mentioned its taking quiet some time to negotiate with the DNS server at system boot time.
Cisco Switching/Routing :: 6500 MSFC No IP Routing Command
Jun 2, 2012I used to "ip routing" command in order to enable inter-vlan routing, for example with 3750 cisco. I have a 6503 cisco with SUP720 MSFC3. I was able to create some vlans but I can not configure inter-vlan routing.
sw#conf t
Enter configuration commands, one per line. End with CNTL/Z.
swsur(config)#ip routing
[Code]....
Cisco Switching/Routing :: IP Routing On 6500 Series Vs 3750?
Oct 30, 2011For intervlan routing, Is 'IP routing' command enabled by default on a 6500 series switches based on the IOS?hes, do we need to enable the "ip routing" command manually for intervlan routing?
View 2 Replies View RelatedCisco Switching/Routing :: IP Routing Command In 6500?
Mar 16, 2013Where is the "ip routing" command in Cisco switch 6500 series?
is the ip routing enable by default accoridng to the: [URL]
Cisco Switching/Routing :: ACE10 HTTP Error Page Not Found
Dec 14, 2011I want to load balance between two webservers using ACE10 working in bridging mode, but when putting the VIP in the url i'm getting page not found, tried many configurations but didn't work, here is the latest one
logging enable
logging buffered 7
access-list ALL line 8 extended permit ip any any
[Code].....
Cisco Switching/Routing :: SG300 Upgrade / Backup Page Not Loading?
Feb 28, 2012Just purchased a SG300-52 and am trying to upgrade the firmware to 1.1.2 but cannot get the Upgrade/Backup Firmware Language page to load in the web browser interface. I have tried IE 8 and 9, Firefox 3.16 and 10.02, and Chrome from Windows 7 and XP Pro systems also tried FF and Chrome from Ubuntu system. The page just never loads - doesn't show anything.The same is true of the Download/Backup/Configuration/Log page. The other links under Administration > File Management seem to work fine.
View 1 Replies View RelatedCisco Switching/Routing :: Difference Between 6500 SXJ And SXI?
Nov 25, 2011i would like to check out what's the difference between the naming convnetion for the 6500 IOS.
I read the data sheet to support my POC deployment to support NCS v.1 the 6500 IOS need to upgrade to 12.2 (33) SXI
Is it able to work if i using SXJ instead of SXI, with the same IOS version 12.2 (33)?
Cisco Switching/Routing :: TFT On 6500 Using Different Vlans And VRF
Jul 24, 2012I have tried to test copy tftp: numerous time with no success. I believe the reason it is failing is my laptop to Ethernet port is in vlan 62 and the tftp process operates in a different IP space.I am using gig 7/1 and configuring my laptop nic for x.x.x.254 mask 255.255.255.0. I can ping from laptop to gateway) and I can ping from the switch to my laptop using ping vrf production x.x.x.254. Can you tell me what vlan I need to set my laptop connection in or if there is something else I need to change to make tftp work on vlan62?Does TFTP only work in vlan1 or can it be changed?
View 2 Replies View RelatedCisco Switching/Routing :: Upgrade IOS In 6500 VSS?
Mar 25, 2012how to upgrade IOS in switch 6500 connect in VSS from 12.2(33)SXI IOS to 12.2(33)SXJ?
View 3 Replies View RelatedCisco Switching/Routing :: 6500 ACL Using QoS Not Working
Jul 16, 2012We are setup like a hotel style workers camp. We have wings full of rooms and residents with 3750 stacks in them. Those switches connect back to our core 6500's. The network is mostly all Layer 3, interfaces are routed with IPs.
When it was built before my time they included an ACL for each wing so that residents couldn't access internal devices (IE SSH to 6500) but I've come to notice it's not working.
I see hits on the ACL for accepts but nothing is hitting the deny rule at the top.Here is the configuration below:
mls qos aggregate-policer INTERNET1 24000000 80000 80000 conform-action transmit exceed-action drop
mls qos aggregate-policer INTERNET2 24000000 80000 80000 conform-action transmit exceed-action drop
mls qos aggregate-policer INTERNET 24000000 80000 80000 conform-action transmit exceed-action drop
[Code] ....
Cisco Switching/Routing :: Does OTV Supported On Cat 6500
May 6, 2013On googling I came across documents that say OTV (Overlay Transport Virtualization) is supported on Cat 6500. Any authentic information whether OTV is supported on Cat 6500, especially with Sup-720B? FYI, Cisco Feature Navigator does not mention it.
View 1 Replies View RelatedCisco Switching/Routing :: High CPU On 6500
Mar 19, 2012SUP2T-D#sh proce cpu hist
11111111111 1111 1111 1111 1111
0000000000099999000099999000099999999990000999900009999999
0000000000099999000099999000099999999990000999900009999999
100 **********************************************************
90 **********************************************************
80 **********************************************************
70 **********************************************************
60 **********************************************************
50 **********************************************************
40 **********************************************************
30 **********************************************************
20 **********************************************************
10 **********************************************************
0....5....1....1....2....2....3....3....4....4....5....5....
0 5 0 5 0 5 0 5 0 5
CPU% per second (last 60 seconds)
SUP2T-D#sh proce cpu sorted
CPU utilization for five seconds: 100%/83%; one minute: 99%; five minutes: 99%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
416 3324188 879928 3777 13.05% 14.42% 14.45% 0 Spanning Tree
633 104408 5091 20508 1.50% 0.53% 0.45% 0 Env Poll
75 22000 298 73825 1.10% 0.13% 0.07% 0 Per-minute Jobs
168 69696 163563 426 0.39% 0.23% 0.22% 0 slcp process
2 532 1010 526 0.07% 0.00% 0.00% 0 Load Meter (code )
Cisco Switching/Routing :: QOS On 6500 Switch?
Feb 17, 2013I am trying to guarantee 100mbps for a vlan across a gig link. I have done some research and found this command for switches
mls qos srr-queue input priority-queue 2 bandwidth 20
However it doesn't seem to work for my 6500. I know the 6500 uses PFC for QOS but I have no idea how it works. how I can guarantee a vlan 100mbps across a 1gig link?
Cisco Switching/Routing :: 6500 Quad VSS
Jul 12, 2011We are getting ready to start testing Quad VSS for our production VSS environments we have done the research and per documentation it seems pretty straight forward.
I want to make sure that the dual to quad VSS is easily done across our multiple VSS setups and I am curious of those that have done this already have you ran into any gotchas on the turn up of the ICS Sup?
Also, just a ICS in a single chassis instead of one in both chassis of the VSS?
In one of our environments we have all single home devices going to VSS switch 1 and only dual homed devices. going to switch 2 so may be desireable to only install an ICS in the switch 1 VSS.
Cisco Switching/Routing :: MLS On 6500 With Sup2T
Aug 9, 2012Cisco 6500 with 2T supervisor engine with following software Cisco IOS Software, s2t54 Software (s2t54-IPSERVICESK9-M), Version 15.0(1)SY1, RELEASE SOFTWARE (fc4)
The problem is that, I am not able to configure Multilayer Switching (MLS) (mls rp ip) in the global config command. Although the "mls" is visible on the config menu. but when I say "mls ?", the router prompt "unrecognize command"
Not sure if SUP 2T support MLS or it come with different name.
Cisco Switching/Routing :: Upgrade IOS In 6500 SUP 2T
May 21, 2012I have WS-C6509-E chassis with VS-S2T-10G supervisor.
Currently I have IOS " S2TIBK9-15001SY - Cisco CAT6000-VS-S2T IOS IP BASE FULL ENCRYPT "
Can I upgrade the IOS to " S2TISK9-15001SY - Cisco CAT6000-VS-S2T IOS IP SERV FULL ENCRYPT " without purchasing this IOS?
Will I face issue in TAC cases?
Cisco Switching/Routing :: PIX515 To ASA5510 - Tries To Connect To Wireless Never Gets Page Loaded
Oct 13, 2012Recently I changed our default gateway from a pair of PIX515 to ASA5510. Since I changed the gateway anyone connecting to our wireless VLAN/network who tries to access the Internet may or may not get a page load. If the page loads it is extremely slow and sometimes the browser page indicator will just spin like it is loading. It's not our access points, if attach an ethernet cable to my laptop and put my switchport in the wireless VLAN I experience the same problem. DNS resolves OK, ping responses are consistent with no drops and access to any internal resources are good. All other LAN VLANs/networks work just fine, it's just Internet access on the wireless VLAN. I see the correct traffic flow in the ASA packet capture. Anything in the ASA Packet inspection related to wireless networking that could be blocked? Is there a way to check for a routing loop possibly?
View 2 Replies View RelatedCisco Switching/Routing :: SLM248G - Admin Page Fails To Fully Load?
Nov 11, 2012We have an SLM248G switch which seems to be giving a few problems. When attempting to access the switch, the admin page loads but after logging-in, the admin portal page does not load fully, see screenshot.
Even after a factory reset (reset button held), the issue continues. Is there any other workaround for completely resetting everything?
Cisco Switching/Routing :: 6500 - Hardware QOS Trust?
May 8, 2012I have a question which i am unsure of, on the 6500 i know i can set mls qos trust to cos or dscp since I don't have any trunks configured on that switch that i want to trust cos most of my ports trust dscp instead. The question is will packets coming in or going out at L3 with the TOS bits set get placed in the correct in/out queue. For example if a packet comes in on a port with a mls qos trust dscp and has the TOS set to XX will this XX get mapped to the correct COS value based on the default dscp to cos map and end up going out the correct queue which handles that specific COS number?
I mainly asked this because i saw the following on the cisco site and again i am suing dscp trust and not cos.
Weighted Round Robin (WRR), Deficit Weighted Round Robin (DWRR) and Shaped Round Robin (SRR). WRED and all the Round Robin scheduling options use the priority tag (CoS) inside an Ethernet frame to provide enhanced buffer management and outbound scheduling.
Cisco Switching/Routing :: 6500 - Stacking Over Fiber?
May 23, 2012Someone had told me the 6500 switches can be stacked via fiber. This feature is available for the 3750s?
View 7 Replies View RelatedCisco Switching/Routing :: 6500 DHCP Not Giving IPs
Jan 15, 2013I have this message "DHCP Timeout"on few cisco IP Phones .try to assign IP manually and it's working fine.. seems DHCP not giving IP's to those.. 6500 have configured as DHCP pool.
View 1 Replies View RelatedCisco Switching/Routing :: Server With 2 Link To 6500 Non-VSS
Dec 6, 2012i have server with two uplink to pair of 6500 non-VSS, this server member of vlan 100 sw-1 is active HSRP while sw2 is a standby HSRP , how can i make this server forward traffic on both Link . the server admin told me only one link is active (green) on the server while the other link is orange
View 5 Replies View Related