Cisco Wireless :: 6500 Not Getting Authentication Web Page From WLC
Feb 27, 2013
We're not getting the authentication webpage from the WLC, Normally the webpage would appear with a 1.1.1.1 url and you are presented with the username and password boxes. It authentics those, which are Active Directory credentials , and lets you in.Now we're not getting that page at all just the browser message about unable to display.I've phyically checked the WLC card in our 6500 and lights are green no alarms and I'm able to log on to the WLC as well.I was told someone had rebooted the controller to try to resolve the problem but its' still the same.Is it the case that the web page has just stopped and needs to be restarted some how?
View 3 Replies
ADVERTISEMENT
Feb 16, 2012
I try to make custom web-auth bundle for WLC 2125. User authentication from this custom page work fine, but any error messages about wrong login/pass not work.
Is this supported function for custom pages? If yes, could you result a working html-code?
View 3 Replies
View Related
Feb 19, 2012
where is the following CAT to IOS configuration for 6500 page moved? I am unable to find this utility? url...
View 2 Replies
View Related
Oct 21, 2011
I am configuring my 5508 WLCs with SW version 7.0.116.0. I configured a guest ssid with web-authentication enabled, but I cannot retrieve the login page on the controller. I configured the virtual interface with the addredd 1.1.1.1 SSID Layer 2 security: None SSID Layer 3 security: Web Policy enabled
I join the ssid with clients, receive the IP address correctly however when I try to open a web page, the login page does not appear. When I check the client status I see that it stuck in WEBAUTH_REQD state.
View 16 Replies
View Related
Dec 21, 2009
i tried to create a customized web-authentication page that will re-direct any user to the web-page once they are connected to the network.
The problem is, i just cant attach/upload the image of the logo into the customized web-page (welcome/login page).Been researching about it, found and tried some clue bout it on cisco documentation, but still can't solve the problem.
Cisco document :Catalyst 3750 Switch Software Configuration GuideCisco IOS Release 12.2(52)SESeptember 2009
switch version :WS-C3750-48TS
show flash :2 -rwx 12305677 Mar 1 1993 01:27:03 +00:00 c3750-ipservicesk9-mz.122-52.SE.bin3 -rwx 131 Mar 1 1993 00:17:25 +00:00 log.text5 -rwx 3254 Mar 1 1993 00:01:01 +00:00 config.old8 -rwx 113 Mar 1 1993 03:24:33 +00:00 pass.htm9 -rwx 1088 Mar 1 1993 03:39:18 +00:00 login.htm10 -rwx 113 Mar 1 1993 03:21:30 +00:00 fail.htm11 -rwx 104 Mar 1 1993 03:25:32 +00:00 expire.htm12 -rwx 856 Mar 1 1993 00:05:19 +00:00 vlan.dat14 -rwx 2479 Mar 1 1993 01:25:05 +00:00 web_auth_logo.jpg16 -rwx 1048 Mar 1 1993 00:01:01 +00:00 multiple-fs27 -rwx 1053 Mar 1 1993 02:18:34 +00:00 webauthpage.html38 -rwx 6551 Mar 1 1993 01:19:33 +00:00 logotest.html
following is my running configuration :Building configuration...
Current configuration : 4205 bytes!version 12.2no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Switch!boot-start-markerboot-end-marker!!!!aaa new-model!!aaa authentication login default group radiusaaa authentication login line-console noneaaa authentication dot1x default group radiusaaa authorization auth-proxy default group radius!!!aaa session-id commonswitch 1 provision ws-c3750-48tssystem mtu routing 1500authentication mac-move permitip subnet-zeroip
[code]....
View 1 Replies
View Related
Nov 29, 2011
i have a dir 825 with fw 2.00eu that i wanted to upgrade to the new beta fw.i went to tools and did a factory reset first,when i wanted to log back in to load the new fw,it sudenly asks for a authentication code,problem is the field is marked with a red x so i cant see any code i'm using windows 7 and IE 9?
View 5 Replies
View Related
Feb 17, 2012
All ip's and any identifying numbers have been change to protect.
I have a 6500 series switch that for some reason will not authenticate to the tacacs server. When you try, you get a password authentication failure. However, it will let you use the configured username and secret to log in thru ssh. And the enable secret to get into privileged mode. Tacacs key is correct, btw.we will call the server vlan 300 and the admin vlan 400.the tacacs source interface is in vlan 400 and the tacacs server is in vlan 300.
I can ping the tacacs server via the switch, but when i use the source cmd with the ip address of the admin interface vlan, ping will not work. I changed the tactics source interface to vlan 300 (the server vlan) and authentication with the tacacs server works fine. ip routing is turned on. There are entries for both the server vlan subnet and the ad-min vlan subnet in the routing table. There are only standard access-lists, and none of them are blocking packets from getting to the tacacs server via the admin vlan.
I could just leave the source interface on the int vlan for the servers, but I would like to find out why this isn't working. I have 1 other 6500 switch on a different network that is configured exactly the same (except for ip's, keys, and vlans) and am not having any issues with that LAN. I also have 6 other 3700 switches on the network that Im having an issue with, and none of them are having issues with authentication.
View 1 Replies
View Related
May 8, 2012
I have ASA 5510 with CSC-SSM-10 .ASA 5510 IOS version- 8.4.2 and CSC-SSM-10 IOS version 6.6.1162.Web filtering is working fine with respective to my configuration.From yesterday morning, i was facing issue with the sites like gmail, webmail.After giving credentials like username and password in the web page, the page is not resonding.In troubleshooting process, i removed all the acls, class maps which will direct all the traffic towards the CSC. In this scenario all my mail service sites are opening.If we apply the these ACLs and Class-Maps, only my mail service sites only affecting.
View 1 Replies
View Related
Aug 18, 2011
I am configuring Clientless SSL VPN on ASA5505 with 8.2(2)17. After the login, default page should be "Home", but if activating "Anyconnect". it always goes to Anyconnect as a first page. If disabling "Anyconnect" using SSL VPN Customization Editor --> Portal --> Application, it always goes to the other one. Never get "Home" as a first page, can I set the first page manually?
View 3 Replies
View Related
Jul 28, 2011
i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen
View 2 Replies
View Related
Dec 21, 2011
how can we upgrade 6500 non modular ios to normal 6500 ios?
View 5 Replies
View Related
Jun 5, 2012
Where do you turn this option off? i have looked under security and did not see any thing.
View 1 Replies
View Related
Jun 28, 2012
I have an AP(Cisco Lynksis Wireless G WAP54G) with one port (LAN) on the back, i have tried several time accessing the administration page but in vain. I reseted the AP (holding the reset button within 10 secondes) and try again to access through my internet brower but still having the same issue on accessing the admin page. The main target is to access the admin page and configure settings in order to amplify my signal in some offices away.
View 7 Replies
View Related
Nov 8, 2010
I just managed to get hold of an old second hand WAP4410N from a friend who got it for work but never really had the time to get it working. I powered it up and performed a 30/30/30 reset to get rid of anything he may have done to it but now I'm struggling to get to the management page. The power light is steady and the ethernet light shows activity but I can't seem to find it on any IPs. I've tried both hooking it into a router and setting up a laptop with an IP of 192.168.1.2, subnet mask of 255.255.255.0 and gateway of 192.168.1.245 and I still have no luck. I'll fiddle with it more tomorrow but it'll probably just involve messing around with more settings and resetting it again, nothing of any real structure. Is there any way of forcing a new firmware onto it over the MAC address or something, for example?
View 3 Replies
View Related
May 21, 2013
I have the following systems in place:
5508 WLC - 7.4.100.00
NAC Guest Server - 2.1.0
I have setup an SSID with external Webauth, which is pointing to the login page on the NAC.All works fine but I cannot use the logout page which is customized on the NAC. I always get the internal default logout.html of the WLC and I cannot customize that.Every customization which I have done to the logout.html (then uploaded it on the WLC) will not be recognized.Is there a way to customize that logout.html?
View 1 Replies
View Related
Jan 11, 2011
Internet shows connected but notebook fails to display any web pages. Diagnosis states resource samsung notebook device or resource (127.0.0.1) is not setup to accept connections on port World WIde Web service (HTTP).When I copied 127.0.0.1 into LAN connections and ran diagnosis again I got a similar message only this time the resource statement was (samsung.msn.com).
View 3 Replies
View Related
Apr 7, 2012
I been using my mechanics Wifi connection with my internal wireless adapter for at least 6 months. Living next door he has a guest Wifi connection for his customers that requires a password. I only had to use the password once and since then it has automatically connected. I recently purchased a usb wirless adapter with an antenna to get a better signal and it connects to the server but the login access page will not display nor will it connect to the internet. With this I get error 102.
View 4 Replies
View Related
Feb 25, 2011
I was in a pub the other day. When I tried to use their wireless I was directed to a webpage to enter the password.I am a web designer and want to make a funky login page, not for a user ID. Just to enter the password to my wireless.How do I do this? Im not aiming to make my system more secure.
View 1 Replies
View Related
Nov 10, 2012
I can't find my linksys network on the "wireless networks" I've been able to use it many other times but just this past week it hasn't been showing.
View 1 Replies
View Related
Jan 21, 2013
Error 6 (net::ERR_FILE_NOT_FOUND): The file or directory could not be found. This is the messageI get when I try to open the bookmark page.
View 3 Replies
View Related
Apr 2, 2013
why are some of the lines solid & others dotted on the map page?
View 4 Replies
View Related
Mar 24, 2012
I have an inspiron, with an Intel Centrioun Wireless-N 1030, that I purchased new just two months ago. I just recently starting having trouble with the wireless internet connection. I am able to connect 95% of the time, but then I cannot load one page. Occasionally, it will speed up and I have a good connection for a few minutes, but then I lose it again. It happens on battery or cord, with two different networks (one large school network and my home network). It doesn't happen if I am on a land/wired connection. The two other computers in my house, two and four years old, are having no trouble with the wireless connections. I have been using the current modem at my house since i bought the computer. Today, we reset the modem to factory settings, with no change. We also did several ping tests and had a 9% failure rate pinging th modem. I have also changed it to run at max power all the time and disabled the option to turn off when lower power, with no change. I have also attempted to update the driver through the device manager.
View 10 Replies
View Related
Nov 7, 2011
I finally decided to go with a e3200 yesterday and picked up one at Walmart. Last night I went to hook it up and had no luck setting it up. Now I have able Internet with a phone VoIP service. After trying to connect several ways, all the router wants to do is sit with a flashing power light. I cannot access the setup page wireless or wired and have tried several methods I found last night.
View 1 Replies
View Related
Mar 11, 2013
I am trying to create a welcome screen for people who join the guest network on my aironet 1040.Webpage pass-through is really what I want but I know that doesn't work on a 1040.What does: IP redirect, Conditional Web redirect or Splashpage redirect?
View 1 Replies
View Related
Sep 27, 2010
We have recently upgraded the software on our two WLC 4404 from software release 4.0.xxx to 4.2.xxx to 6.1.199.4 and lastly to version 7.0.98.0.
We could access the WLC's GUI's using https when it was on version 4.0.xxx. When we did the upgrades from version 4.2.xxx to 6.1.199.4 we couldn't access the Admin page through https anymore but only through normal http. We enabled https through the GUI and through the CLI and we did do the re-generation certificate , without any success. We then upgraded to version 7.0.98.0 and we still have the same result , cannot access Admin GUI through https.
View 2 Replies
View Related
Jul 4, 2011
To enable our receptionits to print a guest user ticket on a small A8 ticket printer I'm looking for a way to adjust the layout and formatting of the guest account credentials page.
I have searched through the javascript and css files but with no success.
We are using WCS 7.0.172.0
View 3 Replies
View Related
Feb 17, 2012
I have a WLC526 running sw version 4.2.61.8 that I finally got around to installing in my shop for testing after sitting on the shelf for several years. Since it's now out of warranty and I'm no longer certified getting the latest sw version isn't possible so I'm stuck with the version it shipped with.
1, How do we change the web log in page from https to http? No guest wants to get confronted with a certificate error page so https doesn't make sense.
2, The virtual interface used for Web-Auth provides for a DNS Name but if I set a name it won't resolve and the log in fails. If I delete the name it uses the assigned IP instead and works fine. How do I get the DNS Name to work since it looks more professional?
3, When changes are made to the WLC I was initially just applying the change and then saving the config but it appears for some of these changes to take affect I have to reboot. It this correct or am I just missing something.
Again some of these issues are probably addressed in the subsequent sw releases but since my device sat in a box for 3+ years I missed out on the opportunity to upgrade and now TAC is telling me { (no contract || no warranty == no software) }, despite the fact that this device reached its EOL.
View 5 Replies
View Related
Aug 31, 2011
So basically my laptop shows its connected to my wireless but when i try to browse it wont let me?
View 3 Replies
View Related
Dec 14, 2011
I'm setting up A DAP-1522 in bridge mode. Network setup went fine. When I went to wireless setup I got a blank page, all white no letters, nothing. I've logged out and back in again with the same results.
View 8 Replies
View Related
Dec 17, 2011
I am using a WRT54GL for the free wifi service at my business. Is there any way to set it so that when someone accesses the internet they are directed to my business home page first?
View 1 Replies
View Related
May 3, 2012
I moved. Runnig an iMac at home. Can connect to the internet but was not able to access my cisco admin page for 54G V5. Also need to connect VPN but unable to.
View 1 Replies
View Related
Aug 1, 2012
I've been asked to create 2 wireless networks for guest access. They are to be used by clients of 2 different companies and they have asked for the website of each company to automatically open as a landing page. e.g.
-WLAN1 - password is companyname1 - landing page = www.companyname1.com
-WLAN2 - password is companyname2 - landing page = www.companyname2.com
Is this possible with our 5508 WLC? I have googled it and can see that you can set a web auth page but I need different landing pages depending on which WLAN is connected to.
View 11 Replies
View Related
Apr 16, 2012
I know it is possible to create custom web auth splash pages on the WLC 5508. Is it also possible to embedd a small document (less than 1MB) that users can download directly from the controller? I need this for providing the terms of use for the Guest WLAN.
View 3 Replies
View Related
