Only One LAN Connection Seems To Be Working?
Jun 4, 2012
Only one LAN connection seems to be working, we have two computers both work only when one of the Ethernet cables is connected to the 4th port on the router. It is only this one that works. The internet and connection works on either but only one can be used at a time, if the ethernet cable from one is connected to any other LAN port than the fourth one there is no connection at all, it reads as unplugged.
I am not even sure when this would have started because up till recently I was using a laptop and didn't worry about a direct ethernet connection however it broke and now we're stuck in this problem.
View 1 Replies
ADVERTISEMENT
Oct 9, 2011
I've got a wireless connection in my house going through a Linksys WRT54GC router and also a wired connection with Cisco gateway (only 1 laptop uses it). About 1 month ago some strange things began to happen with the wireless connection, my PC seems not to be able to connect unless I reinstall the protocols and it's really annoying to do that every time I run my PC. Also, the wired connection stopped working (probably because of cable being broken) but it requires a router restart 90% of the time when I want to connect the laptop (that used to connect through cable) to the wireless network. The 2nd laptop has an issue mentioned in the title, the LAN works but it can't connect to the Internet through the router. Ipconfig /all shows that DHCP isn't working, there's no default gateway and DNS seems to be wrong. Could that all be related to router not being updated for a long time? I tried reinstalling drivers, unistalling and installing back network card and doing most of the things mentioned in similar threads but nothing seems to work.
View 1 Replies
View Related
Jan 12, 2012
I'm having trouble connecting to the internet in my new apartment. If I turn my computer off and on I can connect for a few minutes but it kicks me off shortly after, I've already got most of the information.
View 13 Replies
View Related
May 9, 2012
Connection pretty much just stopped working one day. I have reset my router completely. I have tried the netsh commands. I have tried using different dns ip addresses. I have released and renewed ipconfig. I have reset both my cable modem and my wireless router. I have uninstalled and reinstalled the wireless drivers and made sure they were up to date. None of these things worked.Here is the story. My laptop will not connect to the internet even though it says it is connected and shows the SSID when you hover over the wireless on the bottom. I have an iPad, iPhone, and another laptop connected to this wireless connection. The laptop that does not connect (the one i am having problems with) did connect to another wireless network this past weekend in another house so it is not the card in the laptop. It seems to be settings in this particular laptop with just this wireless connection as the wired connection works fine. It DOES NOT time out when I ping websites in the command prompt. I get returned values. I have tried several browsers and none of them work. It will not connect to AIM either. I hope these details might give someone some insight here. I have spent many hours trying to figure out what the hell has changed and why this connection won't work
View 7 Replies
View Related
Mar 30, 2011
ok,I have a wifi connection to a working router, three other wifi devices are working fine wirelessly, and the computer that cant get date from the internet works when I plug into the router via ethernet cable. I get sent packets but zero 0 received packets, every thing was fine and the only thing I have done recently is get an iphone4 and spend some time getting it personal hot spot to work. I have tried:rebooting, removing firewall ( Norton), repairing connection, setting up new connection, swearing at the screen all to no avail
View 5 Replies
View Related
Apr 15, 2012
My laptop is working fine wirelessley however my desktop which is hardwired and has been working fine for months wont connect to internet ? Ive brought my laptop upstairs and it connects fine via LAN cable to obv an issue with desktop computer/settings
Have tried all the usuall restarting modem etc ... dont know what to do to try and resolve the issue
View 12 Replies
View Related
Oct 10, 2011
I'm having an issue with the connectivity of my wireless internet. Downstairs, everything is peachy. Upstairs, which is no more than 100 feet from the router, the connectivity is non-existent. That is - the laptop still registers full signal strength, and identifies my computer as connected - but the browser constantly loads, google talk is always trying sign in, and my dropbox continues to try and find a connection.The page never actually loads, but it also never tells me there is no connection. It's like the date has slowed so much that it is not actually being sent.
View 5 Replies
View Related
Mar 25, 2011
Ive been using my Sony Vaio laptop (windows 7) to connect to my uni halls internet connection by ethernet cable (and keysurf login) for months with no problems, now all of a sudden my ethernet cable is not being recognised. its not a problem with my connection or cable as other people's laptops work on it. and its not a problem with my hardware as my laptop works in other people's rooms. its just the combination of my laptop and my connection. My friend did something along the lines of resetting the IP address, but not really sure what he did. So i've done a full recovery of my computer.
View 3 Replies
View Related
Apr 24, 2012
I bought a smartphone a couple of months ago, it connects to the web with 3G with no problems. However I can't get it to connect with my modem. I have ticked the phone settings to look for available WiFi and it picks up the name of my modem but says it's disabled, secured with WPA/WPA2 PSK. The phone can't connect to my modem
View 8 Replies
View Related
Apr 5, 2012
For some reasons my laptop "lost a wireless connection to the internet. Basically each time I try to connect I get the following message "The window wireless service is not running on this computer.On the other hand If I connect directly to the modem I get internet connection.
View 8 Replies
View Related
Mar 18, 2012
"Ethernet Connection has stopped working".Its stopped working again and I've run the Network Test and the results are in the file REG.txt attached. I can connect to the internet via wireless OK but I had wireless turned off to run this test.I've proven the ethernet cable OK by connecting another pc to it which works OK.
View 12 Replies
View Related
Oct 22, 2012
I was trying to do something with wifi settings in my DSL router modem and I messed up. So I created a new DSL router configuration with PPPOE and internet is getting automatically connected and working fine. But, When I go to connect to the internet it is giving me Error 651. But, the internet is working fine, when I checked in Networks LAN was configured to connect to the internet but not the connection I regularly use. The status is "Currently connected to network". The connection I use to connect to the internet is now giving 651.
View 5 Replies
View Related
Mar 25, 2013
I have 2 computers. 1 Desktop and 1 Laptop. I have been getting internet on my desktop through a bridge connection via my laptop, which is connected to our modem wirelessly. We have been using Qwest as our internet provider. We just recently upgraded to a 12mb connection. In doing so, we had to set up a new modem. The setup went smooth, and every other computer can connect to it just fine, including my laptop. But here is where the problem lies.So my laptop is connected to the modem (we don't have a router), and my desktop is still connected to my laptop via bridge connection. On my laptop's side, the Wireless Network Connection, Local Area Connection 2 (my desktop), and Network Bridge are all working just fine. However, on my desktop's side, "Local Area Connection" is marked as "Unidentified Network".
I found this site through searching something on google and found someone that seemed to have the exact same problem. I read through it all and tried all the suggestions he was given. For him, his problem was fixed. For me, the same problem still exists. Here is the link to the thread - I have tried uninstalling the ethernet drivers and restarting my computer and i have tried those commands in CMD for the resets and restarted my computer, but they did not work. I have also done a few other things i believe but can't recall exactly what they were.
View 3 Replies
View Related
Feb 14, 2012
I'm trying to configure a timeout for network connection, but when it suppose to disconnect client, it's not working. Is it possible to do this??
Only works when the client is connecting and is denied if the time is not valid. But how could I do this if the client is already connected, enable re-authentication?
View 2 Replies
View Related
Apr 22, 2011
The other night we had a thunderstorm. It kicked me off the internet. Now, I can connect directly to my computer to my laptop (wired), but when I try and establish the connection between the Cable Modem and the Router...it will show a connection between my PC and my netgear WND3400, but not between the router and the cable modem. Also, the ethernet port on router does not light up when connected to modem.
View 2 Replies
View Related
Aug 30, 2011
Do I have a virus my when I try to get on the internet at home is wont allow me in, it keeps popping "not working at time" my wireless is good. what can i do?
View 1 Replies
View Related
Aug 8, 2011
Some Trouble With My Wired Internet Connection,basically it worked somedays other days it cut off and didnt work for a few days,i phoned virgin media who sent me a new modem.Everything is set up and activated and it worked for about a day,now it has stopped working even though the computer says im connected,everytime i try internet explorer or firefox i get a white screen and every webpage i try fails,but if i bring up utorrent i can see that my internet is connected because it begins to download the ebooks
View 17 Replies
View Related
Apr 20, 2011
Basically both the wireless connection and LAN connection in my house were working fine until a couple of days ago. I got one of those viruses that redirects all the links that you go on to random websites on the main PC. I ran a full scan with McAfee Antivirus Plus and it came up with nothing. My brother suggested i try downloading malwarebytes on my laptop and installing it on the PC to get rid of it. Malwarebytes picked up the virus and got rid of it. I restarted the computer and when i tried to access the internet on the PC the message on the browser says "Could not connect". My wireless is fine, but the wired connection to the PC is not. When i look at it on the PC it says that it is connected but the browsers show no connection.
View 1 Replies
View Related
Nov 19, 2012
I've been happily using a desktop PC wired into a router (using an ethernet cable) as well as a laptop that connects wirelessly to the router. This setup has been working fine since I started with it a few weeks ago.
On Friday evening the desktop PC stopped being able to connect to the internet and hasn't been working since. The laptop is able to connect fine wirelessly.
The router light seems to indicate that the ethernet connection is ok. I've tried connecting wirelessly from the desktop PC but that doesn't work either - the Netgear wireless usb adaptor won't open from within Windows as it usually would do.
Nothing has changed to the hardware setup (I've checked all connections) so I wonder if this is a software problem caused by a virus or maybe by Windows updates?
View 19 Replies
View Related
Jan 24, 2012
When I check the strength sometimes it indicates it's good if I'm practically sitting on top of the router, this seems to eventually degrade to low until finally the connection drops.Repairing' with XP repair facility doesn't work. I can forget about getting a connection if I move further away from the router. At the moment I'm relying on using an ethernet cable snaking across the dining room, which isn't really practical with a toddler and a dog racing around. Recently a friend put a bigger HD in and before this it was working fine, so I suspect that it may be due to this. I think it's due to the wirless card in the laptop, as I have a number of other devices in the house which all work fine.
View 4 Replies
View Related
May 12, 2011
my computer is custom made and it has been running just fine until recently. Usually when turn on my computer and login, my computer is connect to the internet. However recently I have not been able to connect with the local area connection and i'm currently on wireless connection. When i'm not using wireless my internet doesn't connect and I can't check my router by typing 192.168.1.1. I have a Linksys WRT54G and i'm using Vista SP2. I don't like using wireless at all and I want my connection to go back to normal[CODE]
View 9 Replies
View Related
Jun 4, 2012
Will not connect to the internet wired or wirelessly. It does turn on however. Not ISP or modem, because when comp is plugged in directly to the cable modem, internet connection works fine. I'm using a Comcast cable connection.
Router is Netgear-N 150 router wnr1000 version 2.My antivirus software is Malware bites, and when I ran it, it didn't find anything.
OS is windows 7 home premium 32 bit.Here's IPconfig:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:windowssystem32> ipconfig /all >c:ipconfig.txt
C:windowssystem32>ipconfig /all[code]......
View 14 Replies
View Related
Jun 27, 2011
I am not that good at troubleshooting network issue but luckily I was able to figure out a problem I had with internet connection not working through my Linksys router. My computer is connected hardwire through a wireless router (linksys) and I have 3 wireless devices that connect to the wireless router.I have had the wireless router for about a year and half. I set it up myself and have had no problems since day one until today.It was working fine this morning, my computer was on the whole time, I never shut it down and all of a sudden a couple hours later went back to my computer and couldn't access the internet. "No internet access" message on the taskbar right hand side.Not one of my wireless devices connect to the internet including my desktop that is hardwired.
I tried resetting the modem...no luck. I'm thinking outage or something else that had to do with my cable company. I called them, the lady had me try without the router, worked fine, problem with router.I called linksys since I am not good at troubleshooting router issues and did not want to reconfigure everything and start from scratch.The lady at linksys says the router is out of warranty and after a year they cannot provide free tech support and wanted to charge me for either two of their paid tech support which the cheapest was 30 bucks. After some time of trying to figure out the problem I notice my ip address was different.
View 5 Replies
View Related
Nov 10, 2012
I have a windows vista pc networked to a second pc. I have wirelessly networked internet to 2 laptops. I have an actiontec wireless modem by verizon. All of a sudden my host pc started randomly losing internet connection, but the wireless laptops still have a signal. It seems like the host sometimes can't "see" the modem.Here are my settings while the internet is functioning.Microsoft Windows [Version 6.0.6001]Copyright (c) 2006 Microsoft Corporation. All rights reserved.[CODE]
View 11 Replies
View Related
Mar 10, 2012
I bought this router and ever since my internet connection will drop out for 5 minutes at a time then come back in. This happens on both wifi and the wired connection. The weird part about it is that if there is a program that maintains a constant connection, e.g. xbox live or an online MMO, they don't lose connection when every other device or even tabs within the same browser all lose connection.
BTW It's the REV_B with the 2.07 firmware.
View 2 Replies
View Related
Nov 23, 2011
I've been working with a company in the UK to get a PTP connection setup between Minneapolis, MN and Chicago, IL. At each site with have a ASR1002. The connection is made via a fiber connection from Level 3. Level 3 is just handling layer 2 and we are to take care of everything else. As of right now they can see the mac address of the Minneapolis port in the Chicago router. But, I can't see theirs. Nor can I ping the Chicago router. The config that was give to me by the higher engineers is simple enough.
View 3 Replies
View Related
Aug 25, 2011
We have two RVS4000 at both ends of a VPN tunnel. The tunnel is up and runs fine. I can ping the two servers at the main office end of the tunnel, and cconnect to the resources of both servers. However, one of the servers, the terminal server, is unreachable via RDP. The other server can be reached via RDP for administrative purposes just fine, but the terminal server cannot be reached. There is only one difference that I can think of. The terminal server is reachable from the outside world via a redirected forwarded port on the RVS4000 at the main office.
The current firmware version is V2.0.0.3 at both ends. Is this a known anomaly for this revision of firmware?
View 1 Replies
View Related
Apr 14, 2013
I am facing problem in implementing NAT on Cisco 8.4 . the scenario is
Inside interface network 10.10.10.0/24 and 10.118.0.0/16 is also routed towards inside network
Other network 192.168.10.0/24 is routed via outside interface.
My requirement is to NAT the 192.168.10.2(real IP) to 10.10.10.2(mapped ip) so that when users from inside network (10.118.0.0/16) will come they will access the 10.10.10.2 instead of the real Ip(192.168.10.2)
So I used nat (inside,Extra net) source static obj-10.118.0.0 obj-10.118.0.0 destination static obj-10.10.10.2 obj-192.168.10.2 but the connection is not working but with show nat I am getting hits on the NAT statement.
cap test Ethernet-type arp interface inside real-time
1: 23:29:05.684199 arp who-has 10.10.10.2 tell 10.10.10.1
2: 23:29:09.687998 arp who-has 10.10.10.2 tell 10.10.10.1
I have also enabled the proxy arp on the inside interface but still the connection was not working.
Packet tracer output
[Code] .........
View 11 Replies
View Related
Feb 15, 2012
I have an ASUS X58C laptop which has been working OK to the internet via the ethernet cable but it has stopped working.I used the laptop via the wireless connection to access the internet while away from home and on my return I can not connect via the ethernet but I can connect OK via wireless. The results with the wireless enabled are :
C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
I can see that the ethernet adapter(s) are shown as media disconnected but I don't understand how to make them connected. I also don't understand why there are two ethernet adapters or what the Tunnel Adapters are.Before I did the ipconfig command I went into Control Panel/Device Manager/Network Adapters/SiS Ethernet Controller, right clicked and selected the Update Driver Software which searched the internet for a driver and installed it.
View 7 Replies
View Related
Mar 8, 2011
We lost internet connection and found out that our router's light is off. Is it possible that something is wrong with the adaptor?
View 1 Replies
View Related
Aug 8, 2012
Three nights ago, around 9:30 P.M PST, my wireless connection to my router began constantly dropping every few seconds/minutes. This happens to all of my wireless devices only while I am in my bedroom, nowhere else. In every other room, my connection is stable.
Connection Issue: Wireless
ISP: Comcast
Router Model: Netgear N300 Wireless Gigabit Router WNR3500U/WNR3500L
[Code].....
View 5 Replies
View Related
Aug 19, 2012
I have a HP desktop Pavilion p6531 p-b (Windows 7) that is hardwired to a Linksys 2500 Router. Internet worked fine until this morning where it can't connect at all. It can pick up the Wireless connection from the router but I can't get it to go online even wirelessly (although I am not sure if I'm doing that part right). I called my ISP and they reset the modem, etc as well as bypassing the router and we still cannot connect to the web. We looked at the Network Center and made sure that in the Local Area Connection, the Internet Protocol Version properties all have "Obtain address" and "Obtain DNS server" automatically checked. At that point their tech support was stumped.
View 6 Replies
View Related
Jun 9, 2011
I've a Airtel Broadband connection with a Beetel WiFi Router. I've installed Windows Vista on my laptop. Though the network icon in the Task Bar shows that its connected I'm not able to connect to the internet. I've tried different browsers but failed. Also I've tried to ping websites in command prompt even that is not working. The connection works absolutely fine on my brother's Dell laptop hence I'm sure that there is no problem with the Router.
Here is the complete system configuration you would need to know. Dell Latitude D630 Laptop. Windows Vista 32bit OS. Beetel WiFi Router.
View 5 Replies
View Related
