My wireless router is slowing my internet massively. When I am hardwired directly into the modem it has great speed, but when going through the wireless router the speed dropps in half, how can I remove the speed throttle?
View 1 RepliesI currently use a E2500 router for my home network. I have setup the Wireless guest Network for my downstairs Tenant while he is out of work so he can still have some internet. The problem however is that often the guest network will take up 90% of my 55mb/sec bandwidth, leaving none for the primary network. Is there a way for me to Throttle the amount of bandwidth the Guest network can use? Say alot 10mb/sec for Guest access only, and leave the rest for our main network?
View 6 Replies View Relatedhow to throttle speeds for a user to websites on Cisco ASA 5540 8.4(4).
I followed the example in the following website [URL] but it isn't working for me. I have website address (such as facebook, etc) in a group called throttle-Websites. I do use nat. My problem is that it is not throttling the speed for that user to those websites. Here is what I have done.
access-list throttle_me extended permit ip host x.x.x.x object-group throttle-Websites
access-list throttle_me extended permit ip object-group throttle-Websites host x.x.x.x
class-map throttle-me
[Code]....
Desktop running Windows 7 Home Edition and connected by ethernet cable to a Netgear DG834G v2. Dell Inspiron laptop running Windows XP media edition and connected wirelessly and an iMac connected wirelessly.I did not realise until yesterday that even if I shutdown the desktop I can still connect the laptop and Mac wirelessly. I now want to stop using the present desktop and connect a new desktop with an Epson printer which my wife will use on the other side of the room. I will use the present desktop monitor on this new system. Is it easy to set this up? Also I want to remove Windows 7 from the old desktop and install it on the new desktop, will I have to contact Microsoft to do thie?
View 5 Replies View RelatedMy home computer accesses the Internet through an ADSL modem and a phone line. I added a wired router (Linksys BEFSR41).I've since bought a laptop computer, an iPhone4 and a wireless router (Linksys WRT160N).Again, on the advice of a friend, I ADDED the wireless router, so now have two routers connected.The devices are connected as follows:
-Wall jack to ADSL modem
-ADSL modem to BEFSR41
-BEFSR41 to WRT160N
-WRT160N to desktop computer.
As I understand Linksys routers, the default IP address for ALL Linksys routers is 192.168.1.1.Both the iPhone4 and the laptop are unable to connect to the wireless router.I'm assuming the two routers are conflicting with each other, so I thought I would remove the wired router..Can I change the IP address of the BEFSR41 router from 192.168.1.2?
Would this resolve the conflict between the two routers and allow the wireless devices to "see" the wireless router? What's the correct procedure for removing the BEFSR41 router from the system?
My son gave me an E3000wireless router but the first instruction is to insert the CD and follow instructions. I don't have the CD. How do I install it? Also, this is replacing an older router that is installed and working. Can I install the E3000 without removing the older router first?
View 3 Replies View RelatedI've configured an static route in the ASR1001 router with a name with it eg: ip route 172.20.x.x 255.255.0.0 172.20.x.x 255.255.0.0 name To_system_X.i want to change the name without removing the route.
View 2 Replies View RelatedThe Cisco E1000 I just purchased provides two connections: a main connection, and one for "guest access." I've successfully disabled the need for password on the main, but the guest access still requires that I assign a password. How do I make this connection open and accessible as well?
View 4 Replies View RelatedI had the 2 circuits go down at the same time from our ISP and I had to power cycle the router and when it came back up I went from VA # 2 to now VA 3#....I know what is what but it is confusing for my counterpart and I can not remove the old entry for VA#1 and VA#2. [code]
View 3 Replies View RelatedCan I do either of the following with a Cisco 5505? Limit Internet bandwidth used by the tunnel so it doesn’t consume our entire Internet bandwidth of 10Mbps at any given timeLimit Internet bandwidth used by any single host for same reason I have a site-to-site VPN configured to another Cisco asa.
View 1 Replies View RelatedI just read the Removing and Installing CompactFlash Memory Cards in Cisco 2800 Series Routers instructions and there was nothing said regading powering down the router. Are these CompactFlash cards hot swappable??
View 2 Replies View RelatedI just discovered that my wireless download speeds are 5Mbps, compared to 16Mbps if my laptop is connected directly to the modem or wired through the router. Uploads are 2Mbps either way. I have a WRT54GS v.6 with firmware version v1.52.8 which I updated today, completed by setting factory default through the router webpage after I discovered this discrepancy. The firmware update did not improve the download speed appreciably, if at all.Should the wireless connection be that much slower than the wired connection through the router? If not, what sort of issues could I be having to account for this?
I did just replace my modem when I discovered I was having erratic speedtests and that corrected that problem. That is when I became aware of the wireless issue, so not sure how long that has been the case. I have Charter's 16/2 HSI, living in a sparsely populated area with solid internet service. There is no external nor internal interference on this 2.4Ghz band.
I have a Arris DLS with 12 Mbps Download and when I Connect my laptop directly I get the same speed as 12 Mbps but when I do the speed test with my linksys I get only 5 Mbps. How to upgrade to the new WRT54GL or WRT54GS?
View 1 Replies View RelatedI am in the process of selling my notebook computer. I did a fresh install of Windows XP and connected to my home router using my WPA security key in order to get the latest updates before selling it. For security sake, I feel I should remove my security key before packaging up the notebook for shipment. I guess my question is, how do I go about removing my security key from the notebook? Or is this not even necessary
View 5 Replies View RelatedI'm donating a computer that was in my office network but would like to delete the office network. How do I do it?
View 2 Replies View Relatedadding/removing/re-adding a workstation to a domain and Active Directory. We use DHCP at work for our addressing scheme. The problem I had when naming a new workstation the same as the one I am replacing on the domain was that I noticed the new pc with that same computer name as the previous pc was still trying to use the IP address that was assigned to the workstation before by dhcp, so the new workstation was not showing it assigned an IP address. I would try pinging the computer name but there was no reply because it was still showing the ip address of the computer disconnected that had the same name.
- remove the faulty workstation from the domain to workgroup, then restart
- then from Active Directory do I need to reset the Computer name
- then do a ipconfig /release on faulty workstation that has been removed from the domain to release the leased ip address in dhcp
- then disconnect the faulty PC and connect the PC I am using to replace the previous PC
- Name this workstation the same as the one I just disconnected and removed from the domain
-Add this PC to the domain and restart
We have a home network setup. My HP Pavilion AMD Athlon 64 laptop running Vista, shares the printer with an older desktop, AMD Athlon 1600 XP. The printer is hooked up to the older computer that I am getting rid of. I assume I will have to install the software for the printer onto my laptop so I can use it. Is there anything else I should do? Other than removing all the files etc off the old computer.
View 3 Replies View RelatedI encountered a similar problem of no internet after virus removal.
a) IE shows "Internet Explorer cannot display the webpage"
b) MSN and Skype do not seem to respond as well
c) My laptop is connected to a router and I'm able to access other PC on the LAN, but not anything requires internet access
d) The LAN icon on the taskbar shows my PC is connected to both the router and the internet (but internet just somehow doesnt work)
e) Proxy option isn't enabled
f) Booted my Win Vista in Safe Mode with Networking, internet doesnt work as well
g) output from ipconfig seems ok; able to ping gateway ip
h) checked the list of network services posted on this thread; they're all started
i) Removed my antivirus program and disabled windows firewall; to no avail as well
j) MSN repair suggests that there's firewall/ dns issue that causes MSN couldnt connect
k) Both wired and wireless connections used to work; but both not working now
l) Other PCs on the LAN are able to connect to internet
I have pix firewall 525, configured with ospf process. We are also performing route filetering in ospf process using route-map. Now we want to remove this route-map from ospf process. Any step-by-step process for removing route map as per below list. How to remove route-map without having any impact as per above configuration.
View 1 Replies View RelatedAfter getting virus and cleaning the system as requested, including all of the registry items not required, I have been unable to get onto the internet.Bad Image Error.I have a Mesh PC, running XP SP3.The motherboard is MS-7207 ver2.I've tried reinstalling the ethenet drivers but to no avail.I can see the network adapter in the control panel and it says the drivers are installed OK.The green light comes on when the cable is plugged in but not the yellow data lamp.I have a second hard drive from an old PC that I reinstalled windows on booted from, I updated the drivers and successfully connected to the internet, which proves all the hardware and drivers do work, but just not on my main hard drive containing my proper windows install.I'm logging this fault on my work laptop as its the only way I can get on line. (My work laptop works at home over the same broadband connection I have used previously.
View 19 Replies View RelatedI just purchased a dell 660 (non slim version) and want to remove the wireless card as it will never be used. Would it be ok to remove the single screw / card + the two antenna wires and then leave it like that?
View 1 Replies View Relatedyellow shield on network sign especially wireless network
View 2 Replies View RelatedI accidentally created a home network and want to remove it, as it blocks all my wireless devices.
I have a dir655 with 2.o firmware
Os on computer I set it up on is win 7 64 bit
How to make other wireless devices easily recognize it? when I try to access it the wireless computers ask me for code that I entered on setup that was printed on bottom of router but system doesn't recognize it.
Removing and Installing a Supervisor Engine on a cisco router 7690 and more important IOS upgrade of this module.
I need some kind of manual, but I would prefer a short procedure to do this change. A brief of the steps to do that. Also i don't if i have to upgrade the new module after install it.
PD.
IP7VAL02#sh modMod Ports Card Type Model Serial No.--- ----- -------------------------------------- ------------------ ----------- 1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1034Z32J 2 48 CEF720 48 port 10/100
[Code]....
we have 2xNexus model 7010 (let's call them Nexus1 and Nexus2) connected via VPC to a couple of catalyst 6509 switch.Trunking has been enabled on the port-channel defined on both Nexus allowing some vlans.Below the config applied on both port-channel interfaces on both Nexus which are members of the same VPC number: [code]
supposing I'd need to remove some vlans from that trunk (e.g. vlan 100,200 and 300) using command "switchport trunk allowed vlan remove 100,200,300" and that I'll run that command on Nexus at a time (that means there'll be a condition for a short period of time where Nexus1 has removed vlan 100,200 and 300 from the trunk, while Nexus2 is still carrying those 3 vlans on its port-channel which is a VPC member) , could it cause any VPC inconsistency condition suspending VPC interfaces and therefore affecting the service for all remaining Vlans or only Vlan 100, 200 and 300 will be suspended when that condition will be detected?
I was working on adding a Cisco 6513 to TACACS but ran into trouble. While I work on the issue offline (recreate and test another switch), I wanted to place this switch on radius temporarily.
For some reason i cant undo/delete the AAA commands in order to point to my radius server. Below was done via console: [code]
I disabled my telemetry port on the Cisco 6513 as a precaution. The IOS im using is "s72033-advipservicesk9_wan-mz.122-33.SXI5.bin".how to remove the AAA authentication statement. Hope its not intrusive cause i have a customer on the box.
I need to remove (or change) the default entry in the routing table for Windows XP, which routes packets with a destination equal to the adapter's address to localhost. The reason for this is I want the PC to be able to send packets to a device (with IP address A) connected to one adapter on the PC with IP address B, even though a second adapter on the PC has IP address A.
View 1 Replies View RelatedMy computer was recently infected with the XP Antivirus 2012 rogue virus. I believe that it has been removed from my computer, but I am unable to connect to the internet. I am unable to obtain an IP address. The IP address is 00000 and the Submask is 0000. My operating system is Windows XP and I am using a High speed cable connection
View 5 Replies View RelatedI have a Linksys wusb54gc, after downloading driver and install, system performance changed. Tried several fixes suggested at another site which failed Cannot delete (access denied) Trying to remove through control panel error "critical file missing" win xp os. Would like for this to work as it had on the computer it was originally purchased for. "gina.dll" interferes with the os.
View 2 Replies View RelatedI need to remove FWSM from a prodcution 6509. This FWSM is a standby. What's the best way to remove without powering down the switch or impacting antyhing?
View 3 Replies View RelatedNTP server When I setup NTP server to take time from [URL] everything is working fine but as soon as I reset my router during boot I can see that router is first trying to get time before it's even connected to ATM and when it can't get time from NTP server it's removing NTP line from configuration (ntp server uk.pool.ntp.org source Dialer0 ). How I setup to wait with sync and do it once ATM connection is up and established? Or How to get IOS to leave this line and sync with NTP every 10 min)?
View 9 Replies View RelatedWe have a stack of 3 cisco swithes 3750s WS-C3750G-24TS 12.2(25)SEB4 .We plan to recover a switch from the stack as it is not needed any more The switch we plan to recover is the existing Master.If we change the priority (switch 1 priority) and make another switch the master using command line will we have any loss of connectivity to the servers conecting to the stack ?
View 1 Replies View RelatedWe have an ASA Version 8.0(5)19 as our firewall.We are trying an cloud service on the internet and found that the ASA is removing the X-Forwarded-For on the header on the surf traffic.Is it possible to not remove the X-Forwarded-For in ASA?
View 3 Replies View Related