I am in the process of selling my notebook computer. I did a fresh install of Windows XP and connected to my home router using my WPA security key in order to get the latest updates before selling it. For security sake, I feel I should remove my security key before packaging up the notebook for shipment. I guess my question is, how do I go about removing my security key from the notebook? Or is this not even necessary
View 5 Replies1) I had Windows XP 2012 Security virus that I removed. The antivirus software also removed afs.sys and afs.reg file, that I repalced from backup. I also copied and merged afs.reg Doing this got me an ipaddress for my PC.
2) I can not connect my wired desktop to the Internet. I can ping the ip address of google.com but not the url. I can also not ping ip address of netgear.com. My laptop has no problem connecting to the wireless network.
3) I ran Winsockxpfix and flushed dns and no luck. [code]
I'm donating a computer that was in my office network but would like to delete the office network. How do I do it?
View 2 Replies View RelatedDesktop running Windows 7 Home Edition and connected by ethernet cable to a Netgear DG834G v2. Dell Inspiron laptop running Windows XP media edition and connected wirelessly and an iMac connected wirelessly.I did not realise until yesterday that even if I shutdown the desktop I can still connect the laptop and Mac wirelessly. I now want to stop using the present desktop and connect a new desktop with an Epson printer which my wife will use on the other side of the room. I will use the present desktop monitor on this new system. Is it easy to set this up? Also I want to remove Windows 7 from the old desktop and install it on the new desktop, will I have to contact Microsoft to do thie?
View 5 Replies View Relatedadding/removing/re-adding a workstation to a domain and Active Directory. We use DHCP at work for our addressing scheme. The problem I had when naming a new workstation the same as the one I am replacing on the domain was that I noticed the new pc with that same computer name as the previous pc was still trying to use the IP address that was assigned to the workstation before by dhcp, so the new workstation was not showing it assigned an IP address. I would try pinging the computer name but there was no reply because it was still showing the ip address of the computer disconnected that had the same name.
- remove the faulty workstation from the domain to workgroup, then restart
- then from Active Directory do I need to reset the Computer name
- then do a ipconfig /release on faulty workstation that has been removed from the domain to release the leased ip address in dhcp
- then disconnect the faulty PC and connect the PC I am using to replace the previous PC
- Name this workstation the same as the one I just disconnected and removed from the domain
-Add this PC to the domain and restart
We have a home network setup. My HP Pavilion AMD Athlon 64 laptop running Vista, shares the printer with an older desktop, AMD Athlon 1600 XP. The printer is hooked up to the older computer that I am getting rid of. I assume I will have to install the software for the printer onto my laptop so I can use it. Is there anything else I should do? Other than removing all the files etc off the old computer.
View 3 Replies View RelatedMy wireless router is slowing my internet massively. When I am hardwired directly into the modem it has great speed, but when going through the wireless router the speed dropps in half, how can I remove the speed throttle?
View 1 Replies View RelatedI encountered a similar problem of no internet after virus removal.
a) IE shows "Internet Explorer cannot display the webpage"
b) MSN and Skype do not seem to respond as well
c) My laptop is connected to a router and I'm able to access other PC on the LAN, but not anything requires internet access
d) The LAN icon on the taskbar shows my PC is connected to both the router and the internet (but internet just somehow doesnt work)
e) Proxy option isn't enabled
f) Booted my Win Vista in Safe Mode with Networking, internet doesnt work as well
g) output from ipconfig seems ok; able to ping gateway ip
h) checked the list of network services posted on this thread; they're all started
i) Removed my antivirus program and disabled windows firewall; to no avail as well
j) MSN repair suggests that there's firewall/ dns issue that causes MSN couldnt connect
k) Both wired and wireless connections used to work; but both not working now
l) Other PCs on the LAN are able to connect to internet
I have pix firewall 525, configured with ospf process. We are also performing route filetering in ospf process using route-map. Now we want to remove this route-map from ospf process. Any step-by-step process for removing route map as per below list. How to remove route-map without having any impact as per above configuration.
View 1 Replies View RelatedAfter getting virus and cleaning the system as requested, including all of the registry items not required, I have been unable to get onto the internet.Bad Image Error.I have a Mesh PC, running XP SP3.The motherboard is MS-7207 ver2.I've tried reinstalling the ethenet drivers but to no avail.I can see the network adapter in the control panel and it says the drivers are installed OK.The green light comes on when the cable is plugged in but not the yellow data lamp.I have a second hard drive from an old PC that I reinstalled windows on booted from, I updated the drivers and successfully connected to the internet, which proves all the hardware and drivers do work, but just not on my main hard drive containing my proper windows install.I'm logging this fault on my work laptop as its the only way I can get on line. (My work laptop works at home over the same broadband connection I have used previously.
View 19 Replies View RelatedI just purchased a dell 660 (non slim version) and want to remove the wireless card as it will never be used. Would it be ok to remove the single screw / card + the two antenna wires and then leave it like that?
View 1 Replies View Relatedyellow shield on network sign especially wireless network
View 2 Replies View RelatedI accidentally created a home network and want to remove it, as it blocks all my wireless devices.
I have a dir655 with 2.o firmware
Os on computer I set it up on is win 7 64 bit
How to make other wireless devices easily recognize it? when I try to access it the wireless computers ask me for code that I entered on setup that was printed on bottom of router but system doesn't recognize it.
Removing and Installing a Supervisor Engine on a cisco router 7690 and more important IOS upgrade of this module.
I need some kind of manual, but I would prefer a short procedure to do this change. A brief of the steps to do that. Also i don't if i have to upgrade the new module after install it.
PD.
IP7VAL02#sh modMod Ports Card Type Model Serial No.--- ----- -------------------------------------- ------------------ ----------- 1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1034Z32J 2 48 CEF720 48 port 10/100
[Code]....
we have 2xNexus model 7010 (let's call them Nexus1 and Nexus2) connected via VPC to a couple of catalyst 6509 switch.Trunking has been enabled on the port-channel defined on both Nexus allowing some vlans.Below the config applied on both port-channel interfaces on both Nexus which are members of the same VPC number: [code]
supposing I'd need to remove some vlans from that trunk (e.g. vlan 100,200 and 300) using command "switchport trunk allowed vlan remove 100,200,300" and that I'll run that command on Nexus at a time (that means there'll be a condition for a short period of time where Nexus1 has removed vlan 100,200 and 300 from the trunk, while Nexus2 is still carrying those 3 vlans on its port-channel which is a VPC member) , could it cause any VPC inconsistency condition suspending VPC interfaces and therefore affecting the service for all remaining Vlans or only Vlan 100, 200 and 300 will be suspended when that condition will be detected?
I've configured an static route in the ASR1001 router with a name with it eg: ip route 172.20.x.x 255.255.0.0 172.20.x.x 255.255.0.0 name To_system_X.i want to change the name without removing the route.
View 2 Replies View RelatedI was working on adding a Cisco 6513 to TACACS but ran into trouble. While I work on the issue offline (recreate and test another switch), I wanted to place this switch on radius temporarily.
For some reason i cant undo/delete the AAA commands in order to point to my radius server. Below was done via console: [code]
I disabled my telemetry port on the Cisco 6513 as a precaution. The IOS im using is "s72033-advipservicesk9_wan-mz.122-33.SXI5.bin".how to remove the AAA authentication statement. Hope its not intrusive cause i have a customer on the box.
I need to remove (or change) the default entry in the routing table for Windows XP, which routes packets with a destination equal to the adapter's address to localhost. The reason for this is I want the PC to be able to send packets to a device (with IP address A) connected to one adapter on the PC with IP address B, even though a second adapter on the PC has IP address A.
View 1 Replies View RelatedMy computer was recently infected with the XP Antivirus 2012 rogue virus. I believe that it has been removed from my computer, but I am unable to connect to the internet. I am unable to obtain an IP address. The IP address is 00000 and the Submask is 0000. My operating system is Windows XP and I am using a High speed cable connection
View 5 Replies View RelatedI have a Linksys wusb54gc, after downloading driver and install, system performance changed. Tried several fixes suggested at another site which failed Cannot delete (access denied) Trying to remove through control panel error "critical file missing" win xp os. Would like for this to work as it had on the computer it was originally purchased for. "gina.dll" interferes with the os.
View 2 Replies View RelatedI need to remove FWSM from a prodcution 6509. This FWSM is a standby. What's the best way to remove without powering down the switch or impacting antyhing?
View 3 Replies View RelatedNTP server When I setup NTP server to take time from [URL] everything is working fine but as soon as I reset my router during boot I can see that router is first trying to get time before it's even connected to ATM and when it can't get time from NTP server it's removing NTP line from configuration (ntp server uk.pool.ntp.org source Dialer0 ). How I setup to wait with sync and do it once ATM connection is up and established? Or How to get IOS to leave this line and sync with NTP every 10 min)?
View 9 Replies View RelatedWe have a stack of 3 cisco swithes 3750s WS-C3750G-24TS 12.2(25)SEB4 .We plan to recover a switch from the stack as it is not needed any more The switch we plan to recover is the existing Master.If we change the priority (switch 1 priority) and make another switch the master using command line will we have any loss of connectivity to the servers conecting to the stack ?
View 1 Replies View RelatedWe have an ASA Version 8.0(5)19 as our firewall.We are trying an cloud service on the internet and found that the ASA is removing the X-Forwarded-For on the header on the surf traffic.Is it possible to not remove the X-Forwarded-For in ASA?
View 3 Replies View RelatedI have a frustrating issue with a dynamic VPN head end running IOS 15.2 on 2900's. I have existing keyrings, and isakmp profiles (both main and agressive) running. When I add in a new peer, by adding in a keyring prechared statement and a match identity in the isakmp profile, phase 1 biulds but phase 2 only gets right to the end and the Cisco side resets the connection because it did not get back a response to it's Phase 2 proposal.I have tried a number of soft clear commands to remedy this (I do have 16 other production tunnels I do not want to take down) and no avail. This is very consistent. We had this happen last week in the same manner, and the TAC finally said I must reboot the system. So I removed the cmap from the interface, and reapplied it (using notepad to do it all at once). All the tunnels dropped, and after a few manual restarts on the far end for thos etunnels that are tempermental, all tunnels came back up, including my new add.I have a pair of 3900's running 15.1 code in the US that terminate the same tunnels, and I can add and remove PEERS all day long without resetting anything. Could there be a more polite way of resetting what ever it is that removing the CMAP does to allow my new peer to get the full treatment here?
crypto pki token default removal timeout 0
crypto keyring Site-to-Site
pre-shared-key address a.a.a.a key lkdshjfhjkdsfkjfsjkddedswdes
pre-shared-key address b.b.b.b key lkdshjfhjkdsfkjfsjkddedswdes
[Code] .....
I just negate this and re-add and new peers start working.
I have 2 x 3750's in a stack, switch 2 is the master. We only have 5 hosts in each switch so we decided to move all hosts into switch to and removed switch 1 as we need it elsewhere. Anyway all worked fine, but I wanted to tidy the config up as it was still provisioned so I removed the provisioning for switch 1 and the config was now showing ports 2/0/1 to 2/0/24, I then wanted to renumber switch 2 in the stack to 1 and saved the config to NVRAM and reloaded and then disaster the switch reloaded with it provisioned with 2 switches. Switch 1 was now the main switch with no config on ports 1/0/1 to 1/0/24, but the correct config was still on 2/0/1 to 2/0/24 so I just copied those ports over switch 1's ports and then removed the second switch and all was good, but I did this all wrong, what is the best way to un-provision a switch from a stack and change the master?
The more I think about it when the switch 1 member was removed should I of copied the port config from the switch 2 (master) first and overlaid it on ports 1/0/1 to 1/0/24, renumber then master form 2 to 1 then rebooted, then removed the 2 switch from the provision?
I have a HP 6530b Laptop, and on-board Broadcom NetLink Gigabit Ethernet adapter.When I remove my laptop from the docking station, I obviously lose Network connectivity, however, when I replace the laptop back (or even just plug in a cable directly), I cannot reconnect to the network until I reboot.When I open Network and Sharing Center (Win7), and click change adapter settings the adapter is missing from the list (after i have removed laptop from docking station).
View 1 Replies View RelatedThe Cisco E1000 I just purchased provides two connections: a main connection, and one for "guest access." I've successfully disabled the need for password on the main, but the guest access still requires that I assign a password. How do I make this connection open and accessible as well?
View 4 Replies View RelatedWe have a live stack with 4 Cat 3750 switches of mixed varieties. Switch 1 crashed the other day and didn't come back up. A power reset brought the switch online again, and switch 2 is now running as the stack master. We are going to replace switch 1 in a staged approach to minimise client downtime. Switch 1 is a ws-c3750-48ts and we will be replacing it with a ws-c3750g-48ts. I will be pre-provisioning and installing the new switch into the stack as switch 5 and configuing the ports to be the same as switch 1. The cables will then be moved over from switch 1 to switch 5 so the changeover time should be minimal. When all cutover, I'll power down switch 1, reconfigure the stack cables and remove switch 1 from the stack.
My question is to what occurs next. If I perform a 'no switch 1 provision ws-c3750-48ts' will I be left with switch 2 through to 5 (ie no switch 1)? I can live with this moving forward. I know I can renumber switch 5 to be switch 1 if I want, but my understanding is that I have to reload the member switch which is something I'd like to avoid at this stage. In my reading, I saw the statement - "Note: You cannot use the switch current-stack-member-number renumber new-stack-member-number global configuration command on a provisioned switch. If you do, the command is rejected." I'm a bit confused by this statement, I'm assuming that it is saying that if I do as above but don't issue the 'no switch 1 provision' command, I cannot renumber switch 5 to switch 1 but as long as I use the 'no switch 1 provision' command first, I can renumber switch 5 to switch 1? Will all of my switch 5 port configuration information and any associated references (eg port-channel configuration etc) be changed from gi5/0/x to gi1/0/x if I do renumber?
I am a bit confused by the output of 'show run' and 'show run switch-profile' that pertains to a port-channel interface configured in a switch-profile. My main gaol is to find out how can I add/remove the allowed vlans the port-channel (configured as trunk) carries. The setup is like this. I have 2 N5k in vPC domain and Etherner1/11 on both switches is configured as trunk vPC that connects to a core switch. When I issue ‘show run’ for the port-channel and physical interface I get the following output. [code] From above it seems the switch-profile configuration is missing the 'switchport trunk allowed vlan' in the port-channel interface. If want I to remove vlan 30 from the allowed vlan, should I go under the switch-profile mode and remove vlan 30 from the allowed list even though the switch-profile configuration seems to be missing this.
View 2 Replies View RelatedI had the 2 circuits go down at the same time from our ISP and I had to power cycle the router and when it came back up I went from VA # 2 to now VA 3#....I know what is what but it is confusing for my counterpart and I can not remove the old entry for VA#1 and VA#2. [code]
View 3 Replies View RelatedI have a Cisco SG300 switch on which trunks are configured. I have a server which sits on the switch via a trunk link of four network cables (4 Gbps total)on which LACP is enabled. I'm having trouble connecting to the server using VNC from a computer on the network. It doesn't happen all the time though, it's just random.
On looking at the logs of the switch, I saw something unusual. The trunk that connects the switch to the server is constantly removing all the member ports and adding them back again after a few minutes interval. That causes the trunk link to flip on and off all the time. What could be the reason that's causing it to happen? I know it could be the network cable but I'm using brand new cables and the server also is brand new.
ws-c2960-24tt-L Ethernet switch adding or removing any device from switch cause a loss of connection to all other devices on switch for about 60sec.
View 1 Replies View Related