I've got a digital phone system but it goes VoIP across our P2P T1's. I am having quality issues between our 2 sites only and have decided to setup QoS on the Cisco 1841 P2P routers. each side that does the voice traffic, I would like to do QoS by IP address, instead of by protocol.I will need an access-list, a class-map and a policy-map and need to point the interface to the policy-map
View 19 RepliesNeed step by step instructions for setting up trust between two domains
View 1 Replies View RelatedI have a LAN running Window server 2000 as domain controller and having 40 client PCs.i want to configure my server as a mail server which is for the time being only a file server. i dont want to use POPS, IMAP or Exchange server.instead i want to use Microsoft Mail to configure my client computers.i have only heard about "Microsoft Mail" mail so far.
View 2 Replies View RelatedHow do i setup a network printer on server 2003 .
View 1 Replies View Relatedi am unable to setup a Bluetooth connection between my nokia phone and my Dell inspiron N 4500. I am currently using windows 7 and the bluetooth icon in the Device manager window is unavailable.
View 5 Replies View RelatedDifferences between using an Apache server on a regular laptop vs. a whole operating system like Windows Server 2008. I'd like to setup an intranet complete with an internal domain name. Is this possible with Apache or do you have to use a complete server operating system like Windows server 2008?
View 1 Replies View RelatedI'm running a windows lan that connects 3 computers and a shared storage external hard drive. The whole network, including the external hard drive is connected by ethernet back to my adsl modem/router. I want to convert the external hard drive into an ftp server to enable secure file sharing on the internet by allowing remote access (for the purpose of downloading files) to anyone that I offer a username and password to.The external hard drive is a Western Digital World Edition (blue light)I believe it's a 2008 model.The adsl modem/router is a Billion Bipac 7300(G) RA.Is this doable?
View 3 Replies View RelatedI have a small network in my garage, it's basically made up of a bunch of test servers. Those and a win xp machine are all hooked up to a switch, and the win xp machine also has a wireless usb stick that is connected to my wireless router, and is being used to share internet to the rest of the machines. The test servers along with the NIC card on my win xp machine sit on a different subnet, however.When I remote into the win xp machine from my house, i can run a second remote desktop in the first session, into any of my servers. I want to do work on them, but its very laggy.
Is there a way I can setup a port either on the win xp machine or my wireless router so that i can remote directly into one of the servers? so if the win xp machine has a wireless ip address of 192.16.13.102, and one of the servers on the 2nd subnet has an internal ip of 192.2.2.4, can i have it so i can make, for instance, 192.16.13.102:6333 forward to 192.2.2.4? If not, is there any other way i can directly remote into one of the servers, by passing the first remote desktop into win xp? What settings would have to be the same across the line?
I would like to setup multiple DMZs for our hosting servers. Currently there is a single DMZ in which our reverse proxy servers are connected using a public IP address. The idea is to have the reverse proxy forward the request from the Internet to the hosting servers in another DMZ. The purpose of the hosting DMZ is to protect it from the outside as well as from the inside. There will also be a development DMZ where we can test content prior to going live with the website.
Network: We currently have two Cisco 6509's (Core) with a FWSM in each running active/stanby configuration. There is a 10Gb Fiber connection between each Cisco switch to two Cisco 4948s (Top of Rack Switches). I can either setup OSPF or Trunking between the core and top of rack switches. The Cisco 4948s will support VLAN 7 (hosting DMZ 10.0.7.0/24) and VLAN 8 (development DMZ 10.0.8.0/24). Each webserver is connected to both Cisco 4948 for redundancy.
Question: If I have a single interface connecting both VLANs 7 and 8, either through Layer 2 or 3, then how can pass both DMZ traffic to the appropriate servers? The reason why the servers are in the same rack connected to the same two switches is that we are using Blade Servers and VMWare.
We have a setup of 2 Nexus 7000 chassis and several fexes (N2K-C2248TP-1GE). The fexes are connected through a port-channel to a single nexus 7000 (no vpc). (Fex 1 to Nexus 1, fex 2 to Nexus 2, fex 3 to nexus 1 etc).Are there guidelines on how to connect a server to those fexes.
I can see several possible scenario's at our site. I have drawn some scenario's on a design. I can't find detailed information on which setup is possible and which is not. The goal is to have as much redundancy as we can.When using scenario 1, do I configure an orphan port on the uplink to this server?
Do you have the ability to setup DHCP servers on this layer 3 switch? I know I can with my old 3550 switch. Want to upgrade and make sure this model supports setting up dhcp servers on it.
View 3 Replies View RelatedWe are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies View RelatedI Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies View RelatedIs there a way to set up Quick VPN on the RV120W without changing the internal subnet? I have just taken over responsibility for a network and I don't know all of the nooks and crannies yet, so I'd rather not change the internal sub net. I've tried setting up a user then changing the LAN settings afterward, but it automatically removed the VPN user when I did so.
View 1 Replies View RelatedI've just purchased a couple of SRP527W routers. I've been unable to even browse to the default 192.168.15.1 to start my configuration. My local network is 192.168.1.x. At risk of showing my stupidity, what am I doing wrong.
View 5 Replies View RelatedCurrently using PC fax/modem card with landline phone cord to send/receive faxes. I live in a very rural area that has really crappy landlines for my phones. Will be getting a Verizon wireless phone system that has 2 RJ-11 interface jacks so I can connect my current landline phones to the wireless system. Is there some way that I will be able to use my PC fax with this Verizon system? The Verizon salesman wasn't sure but didn't think so.
View 2 Replies View RelatedHook my landline phone to my computer.
View 1 Replies View RelatedI'm just trying to configure my phone that's it
View 1 Replies View Relatedbought a new usb cable for samsung champ to connect to hp 620 notebook and installed all necessary things and now it does not charg the phone
View 2 Replies View RelatedAny way to simply have someone phone my computer such that they're on a cell and I'm on my mic? It seems like such a simple thing for this day and age, but my attempt at a Google search is resulting in things that aren't exactly what I mean, such as where I can phone them first, but would have to incur charges, as if I'm using a cell myself instead of a mic. Any way, a site, or a software, to make such a setup work? To be clear, someone using a cell phone--not a mic and not a computer--would somehow "phone" my computer/a software I have, and I would hear them through the speakers as usual and communicate by my PC mic--not a phone and not a cell.
View 2 Replies View RelatedUnfortunately, despite my best efforts to find a better alternative, where I live my only option for unlimited internet with any speed whatsoever is to tether my DROID DNA phone to my computer using the app PdaNet. I've been doing this for over a year now without any problems.I have an unlimited data plan through Verizon and although I only have 3G at my house, it is still far better than anything else I've found.
Recently I started playing the online game World of Warcraft. Obviously the speed isn't ideal, but it worked perfectly fine for about 3 weeks. One night the game started to get really slow and after a minute or two would freeze up entirely. When this happened, I would have an error message on my phone at the PdaNet screen that read "Communication with client has been broken." Despite restarting things, this continued to happen. I assumed that it was because the weather was bad outside, but the problem didn't go away the next day. When I noticed that my internet speed when browsing the web had slowed down as well I figured that although I supposedly have unlimited data, that Verizon must have slowed me down for crossing over a certain download barrier. I've heard that they do this.
So this went on for the next week until the first of the month when my data was reset through Verizon. Well I'm still having the same issue when trying to play the game. It will work alright for anywhere from 30 seconds to 10 minutes, and then all of a sudden start to get slower and slower until it freezes completely and I have the "Communication with client has been broken" error screen on my phone. I'm not sure if my internet speed in general is back to normal or not because I haven't spent enough time online to know for sure, but at the moment it seems to be.
omputer A connects to modum A thru phone line that needs to stay active for a system to operate. Computer B connects to modem B always using the same phone line a few times a month, what device will alow each computer to know and go to its modem, dialing in on one phone line for two modems, and resting in primary state for system A to operate as a Dialer.
View 5 Replies View RelatedI have a DSL wireless router in my house, I would also like to have wireless in my workshop. It's over 130 feet to the shop so my house router won't reach. when I built my shop I put an extra pipe in to pull phone line in but now I'm wondering if i can just pull in a cat 5 and get both data & phone.
View 2 Replies View RelatedRecently at my company we have started using Polycom i335 IP Phones from 8x8 inc, the thing is that while trying to use it directly through a switch it does not register with the server and I get a "url call is disabled" msg on the LCD of the Polycom. On that same switch I am using an Aastra 6755i IP phone, it is working absolutely fine, although it is using the same technology and ports.Now if I connect my laptop via wireless or if I connect a PC through wire and use ICS to share the internet and connect the Polycom to the shared Ethernet port, the Polycom works fine! On the same network Vonage works fine as well. but this Polycom only and only works via ICS?
View 1 Replies View RelatedI have lost my phone and i believe it has been unlocked so how can I find it?
View 1 Replies View RelatedWhenever the phone rings or my mum uses it my internet disconnects, my modem router is attached to a DSL filter so I'm not sure why it's doing this. The phone thats connected to the DSL filter that the modem router is connected to is wired but we have two wireless phones in the opposite side of the house
View 2 Replies View Relatedis it possible to receive a fax via moblie phone?
View 1 Replies View RelatedLately whenever the home phone rings or is in use the DSL cuts out instantly. I have one cordless phone with two handsets. The line going into the phone has an adsl splitter on it. At first i thought mabye a bad splitter so i tried another, yet still got the same problem! Eliminiating that problem im not sure what else to check.
View 7 Replies View RelatedWould one phone line be able to support two ISPs? The rest of my family is using an AT&T line and I'm less than amused with it's performance for 4+ people. I have an unused phone jack available but I'm concerned about ordering the installation package only to find that I need a new phone line)
View 4 Replies View RelatedCan I use my sprint with my Verizon plan ?
View 1 Replies View RelatedI usually use the router supplied by my ISP in one room in the house which is where I use all my.computer stuff as I am the only one who uses the internet in our house. However, my sister is round at the moment and the crap router cannot reach her room or the lounge.I thought I would be able to connect a spare router to a phone line port in the lounge with the correct settings along with the original router. However, if one router works, the other stops working. Only.one router will connect to the ISP at any time, I want both to so that we can all use the internet.
View 16 Replies View Relatedcan i plug a 10/100 phone into a 10/1000 switch?
View 2 Replies View Related