I have a LAN running Window server 2000 as domain controller and having 40 client PCs.i want to configure my server as a mail server which is for the time being only a file server. i dont want to use POPS, IMAP or Exchange server.instead i want to use Microsoft Mail to configure my client computers.i have only heard about "Microsoft Mail" mail so far.
View 2 Repliesi have a network setup like the image in the link(url) and am asking how to make the PC's behind the router to reach the mail server??,when i ping the ip of the server i get timeout.
View 1 Replies View RelatedI had problem accessing to my yahoo mail (Beta) half way replying an email in yahoo itself, 9 hours ago. Since then, I can't log on to yahoo mail eventhough yahoo homa page is working. No problem with yahoo-ing for news but just the mail. I tried these links thourh google search:You may be able to get to your mail with one of these links.http:[url]... Or: http:[url]....
.
but every time the links show a dead-end, "Error encountered processing your last request!We have run into a problem processing your last request! Refreshing the page may fix the problem, or use the link below to return to your Inbox." while no link to be found.I am also using microsoft outlook 2010 for a separate email address. Just don't know how to import yahoo mail.Is it a problem with yahoo beta? or yahoo mail in general?
When I'm pinging my mail server, it gave me different IP's at different times. As the mail server is actually owned by us, I would like to know if that is possible without the IP actually being changed by someone.
View 8 Replies View RelatedMy taskbar is telling me I have no AVG security for my e-mails
View 1 Replies View RelatedI've got a digital phone system but it goes VoIP across our P2P T1's. I am having quality issues between our 2 sites only and have decided to setup QoS on the Cisco 1841 P2P routers. each side that does the voice traffic, I would like to do QoS by IP address, instead of by protocol.I will need an access-list, a class-map and a policy-map and need to point the interface to the policy-map
View 19 Replies View RelatedNeed step by step instructions for setting up trust between two domains
View 1 Replies View RelatedHow do i setup a network printer on server 2003 .
View 1 Replies View RelatedDifferences between using an Apache server on a regular laptop vs. a whole operating system like Windows Server 2008. I'd like to setup an intranet complete with an internal domain name. Is this possible with Apache or do you have to use a complete server operating system like Windows server 2008?
View 1 Replies View RelatedI'm running a windows lan that connects 3 computers and a shared storage external hard drive. The whole network, including the external hard drive is connected by ethernet back to my adsl modem/router. I want to convert the external hard drive into an ftp server to enable secure file sharing on the internet by allowing remote access (for the purpose of downloading files) to anyone that I offer a username and password to.The external hard drive is a Western Digital World Edition (blue light)I believe it's a 2008 model.The adsl modem/router is a Billion Bipac 7300(G) RA.Is this doable?
View 3 Replies View RelatedI have a small network in my garage, it's basically made up of a bunch of test servers. Those and a win xp machine are all hooked up to a switch, and the win xp machine also has a wireless usb stick that is connected to my wireless router, and is being used to share internet to the rest of the machines. The test servers along with the NIC card on my win xp machine sit on a different subnet, however.When I remote into the win xp machine from my house, i can run a second remote desktop in the first session, into any of my servers. I want to do work on them, but its very laggy.
Is there a way I can setup a port either on the win xp machine or my wireless router so that i can remote directly into one of the servers? so if the win xp machine has a wireless ip address of 192.16.13.102, and one of the servers on the 2nd subnet has an internal ip of 192.2.2.4, can i have it so i can make, for instance, 192.16.13.102:6333 forward to 192.2.2.4? If not, is there any other way i can directly remote into one of the servers, by passing the first remote desktop into win xp? What settings would have to be the same across the line?
I would like to setup multiple DMZs for our hosting servers. Currently there is a single DMZ in which our reverse proxy servers are connected using a public IP address. The idea is to have the reverse proxy forward the request from the Internet to the hosting servers in another DMZ. The purpose of the hosting DMZ is to protect it from the outside as well as from the inside. There will also be a development DMZ where we can test content prior to going live with the website.
Network: We currently have two Cisco 6509's (Core) with a FWSM in each running active/stanby configuration. There is a 10Gb Fiber connection between each Cisco switch to two Cisco 4948s (Top of Rack Switches). I can either setup OSPF or Trunking between the core and top of rack switches. The Cisco 4948s will support VLAN 7 (hosting DMZ 10.0.7.0/24) and VLAN 8 (development DMZ 10.0.8.0/24). Each webserver is connected to both Cisco 4948 for redundancy.
Question: If I have a single interface connecting both VLANs 7 and 8, either through Layer 2 or 3, then how can pass both DMZ traffic to the appropriate servers? The reason why the servers are in the same rack connected to the same two switches is that we are using Blade Servers and VMWare.
We have a setup of 2 Nexus 7000 chassis and several fexes (N2K-C2248TP-1GE). The fexes are connected through a port-channel to a single nexus 7000 (no vpc). (Fex 1 to Nexus 1, fex 2 to Nexus 2, fex 3 to nexus 1 etc).Are there guidelines on how to connect a server to those fexes.
I can see several possible scenario's at our site. I have drawn some scenario's on a design. I can't find detailed information on which setup is possible and which is not. The goal is to have as much redundancy as we can.When using scenario 1, do I configure an orphan port on the uplink to this server?
Do you have the ability to setup DHCP servers on this layer 3 switch? I know I can with my old 3550 switch. Want to upgrade and make sure this model supports setting up dhcp servers on it.
View 3 Replies View RelatedWe are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies View RelatedI Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies View RelatedWhen I click on my mailbox on my yahoo page, it asks me to sign in, but when I click on sign in nothing happens
View 1 Replies View RelatedI discovered that an Ad. mail had been sent without my knowlwdge from my computer to all of my "Hotmail" contacts which I had built up over twelve years of computing. I discovered this when I found a substantial number in my 'inbox' as delivery failures.I do not have wi-fi or wireless and there is no other with access to my computer.How was this possible as it is most embarrassing to say the least of it. All of the mails are links to a website or websites that promote "earning money from home."
View 2 Replies View RelatedI know that 255.255.255.255 is the broadcast address to send message to all hosts that are in LAN. what i want here is, i want to send a mail to all hosts using this address.
View 9 Replies View RelatedI Get a mail From Someone which claims which says that they are forwarding a mail from someone How do i find out that the mail i have received s from that original person onlyBecause that person is not replying to me directlyHe forwards mail to a second person{assume} and that person forward me the mail::how do i find out that the mail i have got is really originated from that first person only
View 4 Replies View RelatedRecover a deleted Message
View 1 Replies View RelatedMy emails are not being sent POP3 failed, is there a troubleshoot, autofix website i can go to
View 4 Replies View RelatedI want to setup a lap environment for my studies using Microsoft Virtual pc. I have installed 3 virtual pc of which 2 are windows server 2008 named srv1 and srv2, the third virtual pc is running windows XP professional services pack 2 with the host operating system being windows 7.I have installed Microsoft loop-back adapter and i am trying to network the 3 virtual pc and the host.
srv1 ip address is 192.168.2.200
srv2 ip address is 192.168.2.201
wk1 ip address is 192.168.2.10
host pc's ip addresss for the loopback adaptor is 192.168.2.5 when i check the workgroup i see only srv1 and srv2 i am only able to ping srv1 and svr2, the rest are unreachable.
have a problem with downloading microsoft silver light with both browsers ie mozilla firefox and internet explorer as i click the download button firefox say silverlight server not loading or busy and explorer says page cannot be displayed and i need it really badly as i need to send photos to all my friends.
View 3 Replies View Relatedhow do I access voice mail
View 1 Replies View RelatedI cant access microsoft webpage. I have fresh copy of win XP pro SP3, IE 8, and connected through an updated Vodafone ADSL modem through ethernet. Strange thing is, I can access bank, tv over internet, etc. except MICROSOFT webpages.
View 2 Replies View RelatedI have a problem with my 802.1x Solution in ACS Version : 5.2.0.26. The hours between my ACS and the AD lost synchronize, for that reason the user in my network can't authenticate in the Solution. when i see the hours was different for the AD in 5 minutes, i have to force again the common ntp server 172.25.0.34 (which is ip ntp server). I don´t know why is the reason for lost synchronize, maybe could be a bug.. or samething that i have to configurate in the ACS or AD.
View 3 Replies View RelatedWe're using Cisco Secure ACS 5.2 as a Proxy AAA server, using Active Directory as an External Identity Store. They are already synced and connected and thus I can login into the VPN using my Domain credentials.
But that's not enough. My client needs to limit who can and can't establish VPN session, I mean, the way it is now, EVERY single employee can do that if his/her credentials are valid in the Active Directory domain controller. So I need to do two things:
1) Using the Microsoft NPS server, via dialin attribute, allow or deny VPN sessions using ACS/ASA;
2) Using the company user credential attribute to identify which Authorization Group the requesting user should be in, Downloadable ACLs will then be applied according to the access policies created for each company.
Actually i want to trap the e-mail sender's mac address using his ip from header of e-mail ID... isn't that possible...??
View 1 Replies View RelatedI cannot locate my e-mail contacts list.
View 1 Replies View RelatedWe have two separate external connections, one behind a pix one behind an asa, clients behind either of these firewalls cannot get to skydrive.live.com - the page title loads but then thats it!im debugging behind the pix becuase there is less traffic and ive pulled this from syslog so far-have been googling but not sure if this syslog data is normal or not really
View 9 Replies View RelatedI can't seem to connect to any wifi. I opened my device manager and looked under network adapters ant there is a little triangle with a ! in it. What can I do to fix this???? I'm a college student who needs access to the internet badly
View 14 Replies View Related