Sharing :: Changing Locations To Select Users Or Groups?
Jan 27, 2012
I have three computers in a Workgroup and I can transfer files through all the computers properly. However I cant set up permissions to who can access these files. The three computers are Windows 7 64bit desktop, Windows 7 64bit laptop, Windows XP Professional 32bit desktop.
What I tried so far...
Right-click on folder I wanted to share
Click on Sharing Tab
Click on Advanced Sharing>Permissions>Add...>Locations
I only see the name of the local computer, I don't see the two other computers on the network. The window looks similar to this, how I can find the other computers in my network, in the locations window.
View 10 Replies
ADVERTISEMENT
Jan 18, 2011
I'm trying to setup ACS 5.2 with an ASA v8.3.2 to lock users into VPN groups based on a users AD group. I've tried various combinations but the group lock isn't working. I've done steps 1 & 2 ...
1) Network Devices and AAA Clients -> Define VPN
2) Users and Identity Stores -> Setup AD and Directory Groups, test connection
Policy Elements:
Q1) Policy Elements - Do I need an authorization profile for each group:
Q2) What RADIUS attributes should I use to match my ASA tunnel-groups?
RADIUS-IETF attribute 25?RADIUS-Cisco VPN 3000/ASA/PIX 7.x 85 (Tunnel-Group-Lock)?Other?
Access Policies:
Q1) Do I need to enable and use group mapping?
Q2) Do I need a Network Access Authorization Policy for each group?
View 8 Replies
View Related
Jan 28, 2013
I am using ACS 5.3 What I am about is setting user authentication against existence of the user in specific AD group, not just being a member in any AD. What is happening now, users get authenticated as long as they exists in the AD, luckily they fail on authorization, as it is bound to specific AD group.
how can I bind the authentication aginst specific group in AD, not just using AD1 as the identity source.
View 1 Replies
View Related
Jul 1, 2011
I've tried a few things to get around this, some kids where I work keep changing the wallpaper, sometimes to quite disgusting things. Since groups of them all use the same login with roaming profiles, everyone gets to look and laugh at the annoying wallpaper.
I've tried enabling active desktop local policy and preventing users changing wallpaper but as far as I could tell active desktop didn't even come on, I refereshed the policy.
Does anyone know a good efficient way of simply setting a wallpaper for all users in an ad ou and preventing them changing it? I've got rid of all ways to set a desktop wallpaper apart from the right click menu on an image which has the "set as backgound" option, that's what they are using to do it.
I don't really mind how it's done, could be a registry hack to remove that option from the right click context menu when clicking on an image, I could then deploy it with group policy.
View 5 Replies
View Related
Feb 7, 2013
I am currently facing a major problem. I am a user of the Smart FTP software and have several files in it.However, the "Sites" folder is showing a blank screen. It shows nothing, when there are supposed to be at least 30 files.
I think I have discovered the cause of this; the "Read" permissions are off. Here is where my problem comes in, when I enable it and select "Apply Changes Recursively", it goes back to the unchecked "Read" permission. It doesn't seem to take into account the fact that I want to enable it.
View 1 Replies
View Related
Oct 24, 2012
I would like to know how i can boot other users off of the wifi network temporarily. How can i do this? Ive tried adding their mac address to the router admin, not sure if ive done it correct though, its a dlink login.Failing that is there any programs that can do this?? Ive come across one called wifijam but its only available for mac.
View 1 Replies
View Related
Dec 12, 2011
I created some User Defined Groups in LMS 4.1, now I want to apply certain fault notification groups to Event Sets.
Unfortunately the Groups I configured are not in the Group Selector of the Fault Notification Group: Admin > Network > Notification and Action Settings > Fault Notification Group
View 3 Replies
View Related
Apr 11, 2013
My team are using shared folders on dropbox, but we are having issues where some of the shared files will not appear for some users.I've created a shared folder, and all users have accepted invitations to the folder, but it will not appear in one user's dropbox (neither desktop or in web browser), but it does appear in other user's dropbox.I'm having this issue with several shared folders.The dropbox folder is being shared between 1 pc and 2 macs.I've tried re-inviting & clearing the dropbox cache to no success.
View 3 Replies
View Related
Feb 20, 2013
How can i share application so that other users can directly use application in network without installing in his/her system. I have ubuntu server 12.0.1 installed and users are using windows 7. I will install any other os as server if necessary.
View 5 Replies
View Related
Sep 6, 2011
how we can prevent learners from creating files or folders on Drive C without restricting the users from running programs installed on the C drive. We dont want learners sending tests or answers of tasks to one another by copying it in drive C. We are running Windows Server 2003 Enterprise Edition.I know you got a plan for us
View 1 Replies
View Related
Sep 28, 2011
I've got an HP Microserver, running server 2008 R2 foundation, and I'm using it for file sharing. All files are in a single folder with subfolders, and located in drive C.
The problem is that the server limits the number of LAN connections to it to 31. I've already changed the max. number of connections to the maximum, but doesn't seem to work. Network discovery and file sharing are on, firewall is off, full access rights for everyone.
The error I get when trying to access the shared folder is: 'Microsoft Windows Network: No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept'
View 3 Replies
View Related
Feb 4, 2012
Right now every computer is connected through a workgroup and some computers are sharing files to everyone and some need a login to share other files. I want to run a main server where all the files are on that computer and have it share all the files to everyone else on the network. I'm not too familiar with Windows workgroup networking and file sharing.I want to have certain files accessible to certain computers and certain files accessible to everyone on the network. I'm under the impression that I have to have the main server with all the business documents. Then create separate accounts on the server and hand them out to each individual computer. After, go to each document and specify who can access what with read/write. Can I share some files to everyone and have certain files limited to other computers at the same time? How would someone access the shared files when you need a login and will this login conflict with files shared to everyone and files shared to certain people. I remember on my small business network I need a login for certain computers because it is shared to only certain people then how would I access the files shared to everyone when I have to login to see the server files to begin with?
View 1 Replies
View Related
May 18, 2012
I thought that there are more security issues than LAN issues, I have a network with 11 computers of which 1 is SME server and 10 are clients (mainly 256MB DDR1 tech machines withceleron D processors, onboard VGA and sound; there are few 1024MB DDR2, AMD Sempron LE processors). All clients have XPSP3, .NET framework 1.1+2.0, Office 2003, AvastFree 7.0, Mozilla Firefox 7.0 and several utilities not very important. Every client has 2 users (Admin and User) on Local Machine and 1 on DOMAIN (UserDomain). Both User accounts are limited. First, all computers were in same workgroup and not part of DOMAIN. In that time, printers on clients were shared among themselves and worked flawlessly. After joining the clients to the DOMAIN, the work continued without issues. One day, I have changed the name of the SME SERVER computer and the issues have started. Several clients can not connect to those shared printers, even others are using them well. When I want to add shared printer I can not browse the particular computer on which the shared printer is (through ADD PRINTER wizard). I manage to do it writing the full path of the particular computer and there I can choose the printer.
After selecting it, username and password is required to finish the adding. Of course I use the Admin username ad password, and after typing it error message pop up (printer is unavailable or can not connect to it). After this I close all windows, start the adding procedure again, and then I can add the printer normally. The problem continues, because, on those computers on which I have had this complicated way of install, after several days shared printers refuse to print saying Access denied. Then I have to delete the printer again, install it twice and hope to work after that for a weak at least.
The problem is getting bigger, as on one client computer I can not print from browsers (Firefox 7, IE 8) but from Office there is no problem. Of course I have checked other topics about this and use setups-modifications-advices but they did not solve printing problems. I have even reinstalled that computer, but the problem remains.
View 5 Replies
View Related
May 14, 2012
I would like to create a website to allow users to legally watch videos in streaming but I am struggling in understanding what the related cost would be from a storage and transfer stand point.
View 2 Replies
View Related
Jan 2, 2012
Having problem locating why when a user logs on to their profile, their personal network drive shows everyones personal drive file and they have acces to all files.This is a major security concern as uppper management files are then accessable.It is random, may not always be displayed, or always occur on the same user.The User drive normally displays.
joed on \serverusers$ (H:)
When this takes place the users name is replaced with just Users Users on \serverusers$ (H:) (This can sometimes change to Z drive)
This then exposes all user drives.This does not run from a script but is used in AD under the profile drive letter. Have tried to:Rebuild profile in Active Directory. (New Profile)Re Build user profile on workstation>Rebuild Operating system on Workstation.Change drive on the user profile in AD letter H to Z.Have also tried on a different workstation.
View 1 Replies
View Related
Aug 26, 2012
Is it possible to assign a single ssid to multiple interface groups by assigning the ssid to multiple AP groups?
I have buildings geographically dispersed that are configured with multiple vlans in interface groups so that I can maintain an addressing scheme of dhcp assigned addresses per building. Each building is also further grouped as AP groups. I'd like to know if by assigning the same wlan ssid to each of the AP groups, will I maintain addressing integrity for each building? I'm thinking it will work.
Do the buildings have to be outside AP range of each other to avoid problems?
5508 controller
7.2.110.0 code
6 buildings
6 interface groups
1 ssid
View 4 Replies
View Related
Mar 27, 2013
I have 2 computers running Slackware 13.37 and each has a T10/100 ethernet card/port. I want to create an ethernet network between them to pass text and possibly backup. I have given them 192.168.2.1 and 192.168.2.2. I want to be able to cut the connection at will. If I recall correctly there are 2 types of LANs one is NFS and NIS. Which would be the best for this purpose and where can I find a stepwise approach to setting it up?
View 1 Replies
View Related
Jan 15, 2011
I need to keep surveillance on two separate remote locations, each on a different continent. They're both indoor locations and have broadband. One of these setups should be fully bidirectional so I can see them and they can see me, while the other location is unidirectional so I can see them but they can't see or hear me. In both of these farflung locations the people there have the computer skills of your average escargot, so it's going to be a complete and utter miracle if they can even figure out how to boot the PC. I would like to provide netbooks to each location and have them automatically launch a fullscreen webcam on bootup. How to get this set up properly so that it works in a foolproof manner.
View 1 Replies
View Related
Jan 31, 2011
Is there any way to get reports on voice utilisation on WAN links so that CAC settings can be proactively managed for each location on our CUCM cluster? Our service provider is advising that this is not possible which means that we rely on customer/staff complaints to recognise where CAC thresholds are being reached. Our preference is to be able to run traffic reports (or the Cisco equivalent) as could be done on our previous (traditional) telephony network and provide additional capacity if and when required BEFORE congestion is reached, thus minimising customer/staff impact.
View 1 Replies
View Related
Jan 28, 2012
Has a small home network in 2 buildings with 2 wireless routers. He has fiber from the building where the dsl comes into, running up to his house where a second wireless modem is. Both are broadcasting DHCP but I only want one of them to do this. Ultimately I want his server(2008) to broadcast DHCP, but just one of the modems is fine for now.
View 1 Replies
View Related
May 1, 2012
I know how to connect 2 routers in 2diffrent states using internet.Also which service is used for that purpuse
View 1 Replies
View Related
Apr 4, 2013
560km long pipeline, intermediate station at every 30 or 40 kms. Couple of Ip phones, 2 or 3 IP camera, and few control signls (IP system) will be connected at every stations. Do not expect heavy data. Which one may be the prefered economical solution can I use
1. Ethernet network (Switch with Optical SFP ports at every site)
2. SDH equipment at every site
3. DWDM equipment (if so lower end)
View 3 Replies
View Related
Jan 19, 2012
After upgrading to LMS3.2.1 I cant select devices in Netconfig. There seams to be a defect in the selection box:you have Task selection twice (left task-selector headlined with Device Selector) instead of device-selector left and task-select right.What can we do to can use netConfig?
View 1 Replies
View Related
Feb 24, 2011
Do the 1131AG APs support band select from a 4400 WLC running version 7?
View 2 Replies
View Related
Mar 22, 2011
We are facing a major issue of VPN tunnel going down very often. I have 7 Site-2-Site VPN connectivity, this works fine for some days and suddently VPN tunnel goes down intermettenly for one or few locations and i need to clear isakmp sa for that speicific tunnel to come up.When tunnel goes down the vpn phase 1 status.....
6 IKE Peer: 125.18.0.38
Type : L2L Role : initiator
Rekey : yes State : MM_ACTIVE_REKEY
7 IKE Peer: 125.18.0.38
Type : L2L Role : responder
Rekey : no State : MM_REKEY_DONE_H2
After clearing phase 1 for specific tunnel the VPN tunnel come up.
7 IKE Peer: 125.18.0.38 Type : L2L Role : responder Rekey : no State : MM_ACTIVE
CINBLR01-SQDR-FIREWALL-00002# sh version
Cisco Adaptive Security Appliance Software Version 8.0(4)Device Manager Version 6.1(5)
Compiled on Thu 07-Aug-08 20:53 by buildersSystem image file is "disk0:/asa804-k8.bin"Config file at boot was "startup-config"
CINBLR01-SQDR-FIREWALL-00002 up 1 day 17 hours
Hardware: ASA5510-K8, 256 MB RAM, CPU Pentium 4 Celeron 1600 MHzInternal ATA Compact Flash, 256MBBIOS Flash M50FW080 @ 0xffe00000, 1024KB
[code]....
This platform has an ASA 5510 Security Plus license.
View 7 Replies
View Related
Oct 10, 2011
Sports bar with many Tv's playing differnet games, want the ability to have tables select the tv and hear the audio for their TV,Each table to have set of small speakers and a dial to select the tv.
View 1 Replies
View Related
Aug 27, 2012
I recently purchased a RV120W router and I am having a problem selecting n speed under the wireless settings.
If I select B/G/N-Mixed mode then when I go to save the change I get B/G/N-Mixed B/G/N-Mixed in red letters and it does not save. If I select N only then when I go to save it says in red letters N only N only.
It does not matter if I pick 20 only or 20/40. It does not matter if I enable or disable U-APSD. It does not matter if I use the LSB or USB side.
Firmware Version:1.0.3.10 :When I got the router it had an older firmware if I remember correctly, and it would let me change to n speed.
View 3 Replies
View Related
Mar 12, 2011
i have a Cisco 2801 router which is running ssl vpn, previously my ssl vpn is working, but when i reset the config to factory default and restore the working config, then i experienced this problem;
Here is my crypto config, here is the error:
CRYPT O_PKI: Can not select private key (key name)
webvpn gateway web vpn-gateway host name sslvpngtwy01 ssl trust point key name in service.
View 6 Replies
View Related
Feb 4, 2013
I just saw the AVC feature in WLC version 7.4.100.0 and wonder, if there is a possibility to select a AVC profile per user, based on it's RADIUS authentication via ACS.For example:
- A user in group teacher can access youtube on SSID A
- A user in group student can not access youtube on SSID A
View 3 Replies
View Related
Jun 28, 2011
I have 3 different office location and I need to set up a LAN so that all three are connected and can share info?
View 1 Replies
View Related
May 7, 2011
I setup one location (business retail shopping center) in maryland (using swann dvr/cameras- will switch to qsee) with no internet available.I setup another location (business auto shop) in virginia (using qsee dvr/cameras) with internet through verizon fios.I have internet through cox at home in virginia which I can view cameras remotely only to one location in virginia.
View 2 Replies
View Related
Jan 26, 2011
We purchased a database program which has 3 licenses attached. This is a small non-profit org. We would all like to be able to use the program from our homes. What is the best way for all to share and update data to the same database? Would we all be able to work on it simultaneously?
View 2 Replies
View Related
Feb 6, 2013
why one of my two offices experiences significantly slower speeds when accessing the web. I'm a complete technology simpleton, so I haven't been able to figure out a logical reason for it. Here's the scenario:
Office 1..................................................Office 2
==========..........................................===========
Comcast Business.....................................Comcast Business
tests at 33 mbps down..............................tests at 7 mbps down
tests at 6 mbps up....................................tests at 3 mbps up
6 CPUs access Linksys SR216 10/100 switch..6 CPUs access 3Com Office Connect Ethernet Hub
switch accesses Comcast modem.................hub accesses Comcast modem
My laptop, and all other CPUs, perform significantly faster at Office 2.
Is it the difference between the switch at Office 1 v the hub at Office 2? I always thought they were sort of the same thing. I know I've taken some of the cables out of the switch in Office 1 and put them directly into the Comcast Modem and haven't seen any improvement.
Why on earth does my laptop perform so much better at Office 2. I've also moved desktops to Office 2 and they are noticeable faster at that location as well. I'm stumped. We access a major company's web site for account servicing, and it is twice as fast at Office 2...while using the exact same laptop.
View 3 Replies
View Related
