Sumvision 300Mbps Wireless N PCI Adapter SVW322P

Jan 13, 2013

I have just installed a Sumvision Wireless N PCI card in my Desktop PC which is located upstairs in my home.I want the PC to run wireless to my SKY Router which is located downstairs.(Drivers and Software interface), and along the top of the software, i have 2 mode options to use the wireless card:

[code]...

View 9 Replies


ADVERTISEMENT

System Is Locked After Installing A Sumvision SWV322P Wireless PCI Adapter?

May 8, 2012

I have installed a SumvisionSWV322P Wireless PCI Adapter in to my desktop and have configured it to run on my existing home network: I can connect no problem but after about 10 mins my whole desktop just locks up: The only way I can get out of this is by re-booting by turning the machine off completely by the on/off button. My OS is Windows XP Professional version 2002 SP3:

View 1 Replies View Related

Sumvision SVW322U Wireless Dongle Keep Disconnecting Every 10 - 15 Minutes?

Nov 11, 2012

trying to connect to internet. I am using a Sumvision SVW322U wireless dongle/usb to connect to the internet In the last couple of weeks it will keep disconnection every 10 - 15 mins. All drivers are up to date and i have disconnected the firewall and anti virus but still the problem occurs. My os is windows 7 Ultimate.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : kie-PC[code]......

View 3 Replies View Related

Cisco Wireless :: Why Can't Get 300Mbps On 1141 AP

Feb 2, 2011

I have AIR-AP1141N-A-K9 access point, but can not get over 130 Mbps speed. Looking at the manual it appears that I need to set "channel width" to 40-above or 40-below, but it only accepts 20.  Is the 2.4Ghz radio limited to 20Mhz?  Since the specs indicate that it can do 300Mbps, I must be misunderstanding something.

View 4 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND Router Can't Get WAN IP

Mar 25, 2013

Region : Germany
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 8.1
ISP : M-Net

I set up my router and it does not get a WAN IP.The PPPoE user/pw ist 100% correct but in the "status field" it always says: "connecting" and i can't get an IP.The router is connected with the modem via RJ45 cabel that was in the box.My PC has no problem getting to the internet with direct modem communication (pppoe).

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - How To Set For Wake On Lan

Mar 30, 2013

Region : Others
Model : TL-WR841ND
Hardware Version : V7
Firmware Version :
ISP :

my ip address is not static i use no-ip sevice to get dns how to set my tp link for wake on lan

I managed to update ddns in my tp link How do I go from here?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: New Firmware For TL-WR841N(D)

Apr 22, 2013

I am currently running a TL-WR851ND Wifi Router whith the latest build 3.13.27 Build 121101 Rel.38183n() published last November 2012. Now is there any new firmware?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Using WR940N As Bridge?

Dec 10, 2012

Region : UnitedStates
Model : TL-WR940N
Hardware Version : Not Clear
Firmware Version : latest
ISP : Time-Warner

Just purchased the WR940N to use as a wireless bridge. I expected to be able to have the router join my wireless network, and provide Ethernet connectivity to 4 devices behind it. But I'm missing something in the configuration. I can get it on the wireless network, and manage it via the wireless network. But devices plugged into the Ethernet cannot get out to the Internet. Basically, I have a 192.168.1.x network, and the router is node 192.168.1.3 on the wireless network. I've turned off the firewall and DHCP on the router. The Ethernet devices behind it get an address from my network, but the router inserts its own address in as the default gateway, and my Ethernet devices do not have a route to my 192.168.1.x network, despite having an address on it.

View 4 Replies View Related

TP-Link 300Mbps Wireless :: WR1043ND V1.9 Not Seeing A WD 3TB USB NTFS HDD?

Dec 21, 2012

Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :

Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :

I have a WR1043ND

Firmware Version:
3.13.12 Build 120405 Rel.33996n
Hardware Version:
WR1043ND v1 00000000

I tried to connect a WD MyBook Essential 3tb hdd NTFS, but it never recognized it. Of course, I connected it with the external power supply.With a 15gb pendrive FAT32 it works OK.

View 14 Replies View Related

TP-Link 300Mbps Wireless :: WR1043ND Very Low Upstream?

Nov 26, 2012

Region : Russia
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :

Region : Russia
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : wr1043nv1_ru_3_13_10_up(120614)
ISP : netbynet

Connection to a router on a cable speed of dowstream-50MBit/s, upstream-3Kbit(!) wifi-dowstream-50MBit/s, upstream-3KbitA cable directly in the personal computer to 70 Mbps there and back.Measured speedtest.net, and as [URL] The matter is that even elementary with an investment it is impossible to send mail - I am connected by different devices-2 of the laptop and 2 smartphones - the same. Technical support of provider already talk sense only in a router. Insertions updated, changed - the same( Firewalls are disconnected, any more don't know what to do and where proceeding speed and all digs-is killed. Russian forum TP-Link is idle.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: How To Disable NAT On TL-WR843ND

Apr 16, 2013

Region : Others
Model : TL-WR843ND
Hardware Version : Not Clear
Firmware Version :
ISP :

I buy TL-WR843ND router to provide a better signal upstairs. Router is in wisp mode with statick ip. Everyting work good. I have routed home network with mikrotik. And everyting was setup with priority on mikrotik for each user separately. With this router every user connercted on it was hidden behind TL-WR843ND. How to disable NAT on TL-WR843ND to use routed network?

View 5 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND How To Get Device Pin

Dec 26, 2012

Region : Austria
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :

unfortunately I've lost my device pin and I've reset my device.can I get the device pin on a other way? on my invoice there is no information about that.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND - Can't Ping By Name

Nov 29, 2012

Region : UnitedStates
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : WR1042ND v1 00000000
ISP : comcast

I have a machine called 'survtest' on my lan with a permanent ip addr of 192.168.0.112. I can't ping that host by name from any other machine on the lan, although I can ping the ip address. Not only that but this machine appears in the DHCP client list within the router with its name 'survtest' and correct IP addr.

There is another machine on the lan called 'bsd' that also has a permanent IP addr of 192.168.0.110. It can be pinged by name from any other machine on the lan. However it does not show up in the DHCP client list at all.

Neither of these machines can be pinged by name from within the tplink admin diagnostic screen.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: VPN Usage On TL-WR1043ND Without DD-WRT?

Jan 22, 2013

Region : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :

Is it possible to use a VPN service such as hidemyass on the TL-WR1043ND without installing the DD-WRT firmware?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND Network Goes On And Off

Nov 29, 2012

Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 3.13.18

I recently bought a wireless N router (TL-WR841ND). I could connect my laptop to internet using the router but the problem is whenever I try to connect my phone to the wireless network, it goes on and off. It'll be on for a few minutes and then it is off and so on. By the way, the phone says you're still connected to the router but actually there is no real internet connection. But anyway, my laptop is connected to internet anyways!

I am living in a dormitory. And the website of the ISP is url... which provides dynamic IP. I have already tried different LAN IP adresses.I have already tried MAC Clone for WAN but nothing changes.I'm in a dormitory, there is also other routers here, could it because of conflicts with the other routers? [code]

View 4 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - Network Goes On And Off

Nov 29, 2012

Region : Germany
Model : TL-WR841ND
Hardware Version : V3
Firmware Version : 3.13.18
ISP : [url]...

I recently bought a wireless N router (TL-WR841ND). I could connect my laptop to internet using the router but the problem is whenever I try to connect my phone to the wireless network, it goes on and off. It'll be on for a few minutes and then it is off and so on. By the way, the phone says you're still connected to the router but actually there is no real internet connection. But anyway, my laptop is connected to internet anyways! I have already tried MAC Clone for WAN but nothing changes.[code]....

View 1 Replies View Related

TP-Link 300Mbps Wireless :: 2xWR941ND WDS Won't Work

Mar 22, 2013

Region : Germany
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n

I bought 2 router but WDS wont work. If i set on both WDS on they wont connect themselves wireless statics show 0 stations if i only set one to wds then there is one station connectet but it only functionates in one way. I set WDS on router A on and plug a lan cable to my pc i can configure Router B if i plug in B my lan cable i cant configure router A. If i plug my existing network on B and mein PC on A in then i can config all my router in the network but inet wont work -.- what did i false? or have they a disfunction? I tried it withouth wlan security and with wpa2 no succes

View 8 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR941ND - Way To Set Up WDS Using Router?

Feb 16, 2013

Region : Others
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP : Bezeq benleumi

I want to setup WDS using my TL-wr941nd WDS router?

View 7 Replies View Related

TP-Link 300Mbps Wireless :: Why To Install CFW On Wr1043nd

Jan 25, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12

I just got one of these to replace my old wrt54g. Seems to me a lot of people are flashing theirs with dd-wrt or openwrt. I was wondering why exactly. Unlike the old wrt54g, the tp-link stock firmware supports a lot of features in my view, especially the so wanted QOS. Do the CFW give the wr1043nd more stability or maybe better performance? Or is it about features? What features a CFW would add to the stock fw?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: Using TL-WR1043ND As A Switch?

Dec 24, 2012

Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :

My house has thick internal walls, so WiFi does not propagate easily. I am fortunate to have FTTP. Therefore I have the following setup: At one end of the house there is a Genexis HRG1000 Fibre Optic Modem / Router with WiFi and 4 ethernet ports. One of its ethernet ports links to a Devolo 200Mb homeplug and there is a matching homeplug at the other end of the house which is linked to a WR1043ND. We have tried two configurations each with various settings. If we link into the WAN port it creates a separate network which cannot be seen from the fibre modem end (since the 196.168.1.n addresses are non-routing) and although this works, we cannot stream / transfer files from the PC (connected to the fibre modem by ethernet) to the smart TV connected to the WR1043ND. The TV can "see" the internet and things like iPlayer work. Various other gadgets can connect either by ethernet or WiFi and get successful internet access. Alternatively If we link into one of the LAN ports, AND disable both the DNS service and the DHCP server in the WR1043ND it all appears as one network, but although it is disabled, all the gadgets and computers try to use the DNS in the WR1043ND rather than that in the fibre modem and consequently there is no internet connectivity. We have tried several combinations of fixed and dynamic IP addresses, rebooting the WR1043ND and the PC etc. but nothing seems to work. What does work is giving both WiFi routers the same SID and password so that moving from one part of the house to another with, say, a smart phone transfers what connectivity there is seamlessly.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR941ND Losses Its Settings?

Dec 25, 2012

Region : Others
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP :

I have two(2) WR941ND routers working at my home. The primary has IP : 192.168.1.2 , this primary router is working as an Acess Point, DHCP is OFF, and no wireless security activated. This primary router is connected to a DSL modem+router and DHCP is activated on it.For the secondary router I configred 192.168.1.100 . On the secondary router I have activated WDS function as well as Wireless Security (WPA2) , DHCP is Off on it. This secondary router is to work as wireless bridge + Access Point. You will understand that this secondary router is wirelessly connected to the primary one.I am able to configure all, and all things work correctly for few days at a time.But if at any time the secondary router is switched OFF, and then again switched ON, it seems to have lost al the settings and its IPs, and thus unable to connect to primary router. At such time I am unable to locate /connect my laptop to this secondary router, and it keeps on searching & searching.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: VPN Connection From Win 7 Client To TD-W8970?

Mar 7, 2013

Region : Australia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

I am trying to get a windows 7 laptop to connect to a TD-W8970.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Disconnects Every Two Days?

Mar 19, 2013

TL-WR1043ND disconnects every two days

View 7 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR842ND PS3 Console Does Not See Files

Nov 27, 2012

Region : Poland
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22 Build 120424 Rel.39632n

I recently bought an new router TP-LINK TL-WR842ND. After configuring it I connected it via an cable connection to my PS3. The Internet connection works correct and I'm able to use all network feature on my console.

Then I connected a USB Hard Drive to it USB port and I enabled Media Server feature on the router. I have done steps described here url... but with no results. My PS3 sees the Media Server, but when I open it it shows no files.

View 7 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND Won't Send Out Email

Jan 24, 2013

Region : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.12.22 Build 120424 Rel.39632n

I have a WR842ND with firmware 3.12.22 Build 120424 Rel.39632n. I can't seem to get the mail log emailed out. I've tried hotmail, gmail and ISP email ids. I know these will work as I've done it with my NAS and other routers. When I'm in the System Tools/System Logs/Mail Settings I have authentication enabled and I know I've put in the proper information including mail server outgoing mail names EG. smtp.live.com for hotmail.

I don't see any place to identify a non standard port IE. not port 25, to use. So when I try to send I get the Userid or password is wrong message. Do I have to configure something else.

View 5 Replies View Related

Tp-link 300mbps Wireless :: Wifi Dropout On Wr842nd

Mar 1, 2013

Region : Australia
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.24 Build 130110 Rel.58124n
ISP :

The wireless drops out on my router every 1 or 2 days. I checked the LED on the router and it goes off when this occurs.I have attempted to turn WiFi back on using the 'on/off' button on the rear but it still won't work. The only remedy is to pull the power plug for a few moments and plug it back in.

View 9 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND Loses All Connections?

May 6, 2013

Region : Others
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : TL-WR1042ND_V1_130117
ISP : Optic konvertor DHCP mod

I bought TL-WR1042ND and I have problem. After 2 hours, the router loses all connections. Lights that everything is OK, but he can not connect to any site on the Internet or LAN. Even nor to 192.168.0.1 Only search for the host.

I have a DHCP internet. DNS 8.8.8.8 I disabled firewall and all I do not need, but nothing worked.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR941ND Constantly Freezing Up?

Feb 1, 2013

Region : Canada
Model : TL-WR941ND
Hardware Version : V5
Firmware Version : wr941nv3_en_3_13_9_up(120201)
ISP : Teksavvy

This wireless router keeps freezing. It might stay up for 6 hours at the most, then I have to reset it or unplug for 10 seconds to get it to reset. I updated the firmware a few months ago thinking this would solve the problem. It hasn't.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - USB Hub With Multiple Printers?

Jan 9, 2013

Region : Others
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

I got a TL-WR842ND to try and decide if i want to buy it. I want to connect a usb hub with 5 printers connected to that hub and use it as print server, would that work at all?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: Use TL-WR1043ND USB Printer For IDevices?

Apr 9, 2013

Region : Germany
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

my new TL-WR1043ND. I've just installed the usb print driver for my HP PSC 2355 and it works fine for the PCs.Currently i'm wondering if i have any chance to also print using my iDevices (iPhone & iPad) in an AirPrint like way? The devices are connected via WiFi.

View 2 Replies View Related

D-Link DIR-615 :: Wireless Speed Drops From 300Mbps To 130Mbps?

Feb 20, 2013

I have a issue, my DIR-615 V.E3 has been working good.  I have multiple computers connected and all get between 280 and 300Mbps.  But then after a few hours the speeds drop to 130Mbps on all computers.  After I reset the router the speed returns to 300Mbps.  I have it set up to run on N speed only so g devices are not connecting.

View 14 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR842ND - UPNP Not Working On PS3?

Dec 22, 2012

Region : UnitedStates
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22
ISP : Bright House Networks

I'm having a problem as my PS3 keeps showing up as UPnP not available even though it is turned on in the router menu. What can be the cause? I want to say there is something wrong with the PS3 and not the router.

View 6 Replies View Related

TP-Link 300Mbps Wireless :: Corrupted Update To TL-WR841N V7

Oct 31, 2012

Region : Malaysia
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.12.7 Build 110726 Rel.37868n
ISP : unifi

as I tweeted here: [URL] The top download from [URL] is corrupt.

Took my ages to find that I need to post in the 300Mbps Wireless Routers forum to get support with the TL-WR841N. All the little subgroups are a little over-engineered to say the least.

I'm keen to improve the performance of this router. It needs rebooting and Apple based clients need to reconnect all the time.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved