Toshiba A665D Wireless Capabilities Do Not Turn On
Sep 15, 2011
I have a Toshiba A665D. For some reason the wireless capabilities is turned on and doesnt turn back on no matter.what ive done
- ive tired fn+f8 but it tells me waireless capabilities are disabled.
- the wireless button on top of the keyboard above the f8 does not do anything but light off then light back up
- in Windows Mobility Center, the turn wireless on button is disabled so i cant use it
- ive even tried uninstalling the driver and restarting the computer
- system restore doesn't work
I have a higrade VA250D laptop, I have just connected a wireless adapter to my main pc, but when i try to connect the laptop to the wireless connection i get the message that "the wireless adapter is turned off. turn the wireless connection on by means of the switch usually found on the side or front of the unit or by means of the function keys". I do not have a switch on anywhere of the outside of the laptop and i am unable to find a function key to turn it on. How to switch the wireless capabilities on. I have checked on the device manager and it has a green tick and says that the device is working properly.
I can't turn WI-FI on in my Toshiba A 665, Win 7. At the biginning worked good ,than vanished. Checking Fn > F8 below main icon (with an antena ) do not show up other four icons below, like they suppose to do. So I'm not even able to try to turn it on. Restarting doesn't do at all. Pushing Wi-fi switch, above the keybord, doesn't even show On/of icon.
can't turn on wireless A665-S6094 Toshiba Satellite, tried the FN & F8 keys, but nothing happens Maybe I'm missing a driver or software to fix this wireless problem.
We have Wireless connection facility in our collage. All my friends can access to wireless but I cannot. How to connect to wi fi in my laptop.I tried to power on the wireless by pressing FN+F8 together but at network connection it displays as No connection is available.Secondly I checked the device manager and under Network adapters there is only three driver Bluetooth Device (Personal Area Network), Bluetooth Device (RFCOMM Protocol TSI) and Realtek PCIe FE Family Controlleer are working.I also checked the driver of this PC and found one folder named WLAN_B and even did the setup but still not working. I am using windows 7 Professional and 64 bit of OS.
I have a Toshiba A350 satellite notebook. The wireless adapter was working fine, then I installed Windows 7. Now the adapter wont turn on. I've searched forums, and followed several threads to no avail.The wireless switch is on, but there is no LED. Fn+F8 does nothing. I have restarted and reset the BIOS to defaults.I have disabled Internet protocol 6.All of these have made no difference. I can access the internet via a fixed connection, but cannot get the wireless adapter to respond.
The switch is one, device manager shows the wireless card removed the switch and checked it and it moves to "off/ON" no problem System still says the switch is off.
I am having to use my ethernet for my lap top, Satellite Toshiba. I have a router and the other laptop in the house works but mine wont. Cox blames it on Toshiba and Netgear and netgear blames it on Toshiba. i blame it on Cox who says for some reason my Toshiba wont allow the signal to be picked up. It goes elsewhere but not my laptop. PS is my satellite burner capable or do I have to buy softwARE?
I will be purchasing an Insprion 570 with an AMD Athlon II X2 Processor 245 and 4 gigabytes of RAM from Dell in a short while as a budget gaming computer. I have a Qwest wireless router connected to my main rig, and I was just wondering if I would need to buy a wireless adapter, namely the Netgear WNA3100 Wireless-N 300Mbps USB Adapter from Dell, to be able to recognize and connect to the network, or would it automatically recognize the network without it.
I own a Netgear Router and the wireless capabilities are not working. I have it connected to a comcast arris Modem. When i have and ethernet cable connecting my laptop, router, and modem, i get a connecting. but im not sure how to get the wireless running. I have used this router before ith my old internet provider. Ive tried messing around with the router settings for a while but i cant get it working.
I have built my own computer and have almost finished with everything, but I am unsure as to how to set up the wireless capabilities for it. I am submitting this thread on the computer itself, but am using an ethernet cord to connect to the internet. I don't know if I need to download and install a different driver or if there is a simple way to just change some settings in the control panel. I am using windows 7 64 bit. The networking hardware is a realtek 8111f Gigabit LAN controller
I'm trying to set up a wireless bridge as part of my network and I'm having some issues.I'm only assuming I need a wireless bridge setup based on what I've gathered in forums such as this, but perhaps I'm barking up the wrong tree.Internet Modem --hard wire-- Belkin F9K1102 Router {{{fancy wifi waves}}} TP-Link TL-WR340G Router --hard wire-- CPU..I already have a working wireless/wired router (Belkin) that I use to get online. I have a CPU that can only connect to my network via hard wire in another room. Running a hard wire from my Belkin router to the CPU is NOT an option. Therefore, I would like to use my TP-Link router (which has built in WDS wireless bridge capability) as a wireless bridge and have it connect to my Belkin router and thereby the network and the internet via wifi. I will then connect my CPU to the TP-Link router via hard wire.
I've tested both routers directly and independently connected to the modem and they both work fine. The issue I have is only in trying to get the bridge between them to work. I've followed various tutorials (TP-Link website, YouTube videos, site like this one, etc.) to no avail.I know that my Belkin router does not specifically have wireless bridge capabilities, but I'm not sure if BOTH routers having this capability is necessary for a wireless bridge to work or not.I also have multiple screen shots of the router configuration settings for both routers which can be provided if need be.
Can I daisy chain an RV042 and a WRTSL54GS and have them work properly? I would like to take advantage of the VPN piece of the RV042 (as the primary router) and the wireless and storage capabilities of the WRTSL54GS.
I have 2 CISCO WS-C3750G-12S-E witch I`m concidering using as redundant VLAN routers for a small WISP network.Do not have much experiences with these, so I might be asking stupid questions...The network has about 2000 connected clients.
Traffic is about 300 - 400 Mbps duplex.
100000 - 150000 PPS
Expected this to get to about 3000 connected clients.
Traffic about 500 - 700 Mbps duplex.
150000 - 200000 PPS
Before these end their duty Are they up for the task, or do you reccomed something different?
I'm currently looking at the slew of firewall options out on the market. I have the task of recommending one for a client that has the most functionality for a reasonable cost (preferably no more than $800). I typically would go with the ASA 5505 w/base lic. I have been using ASA devices for some years now and they have been great. But, as with the ever changing internet and security threats, would I be ok in going with the ASA? I'll admit I'm not knowledgeable in all the capabilities of the ASA. Is it considered a "Nex-Gen" firewall? Where is the ASA ranked in comparison to the other options like SonicWall, Juniper, Fortinet, etc.? I've worked with SonicWall and Juniper, but did not like them. It has been sometime though, so maybe they have gotten better.
With having layer 7 filtering and IDS/IPS capabilities, one feature I will need is VLAN capabilities and ability to provide separate DHCP service for each VLAN (ASA can do this). I will be setting up a guest, internet only, network. VLAN trunking would be nice (ASA can do this with security plus lic, expensive though). In addition, having solid VPN capabilities (client and site-to-site). Good product support and documentation is a must too.
Before I decide to purchase the ASA5510 as our firewall solution I'd like to clear up some confusion I have regarding its expansion capabilities. According to the Cisco website, the ASA5510 supports 1x SSM expansion slot. Intrusion prevention (IPS) is supported via the AIP SSM. Content Security (anti-virus/spyware, file blocking) is supported via the CSC SSM.
One would assume that only one of these expansions can be enabled at time since it is clearly stated that the ASA5510 supports 1x SSM expansion (AIP SSM or CSC SSM). However, the Cisco representatives I've spoken with on the phone claim I can concurrently run both the AIP SSM and CSC SSM in a single ASA5510.
Also, I am debating if the ASA5510 is overkill for our network infrastructure and perhaps we should be going with the ASA5505. Essentially, we have a large network of users and we'd like to firewall three machines from the users such that only certain users (15 users) are allowed to access them. Are there any other compelling arguments to use the ASA5510 instead of the ASA5505 aside from the fact that ASA5505 does not support content security?
Can I have two wireless networks running in the house? Does a low internet speed affects my home network sharing capabilities? Can I have one network with internet and the other one just intranet. I would like to stream using DLNA without affecting my internet speed. I have D-link router DGL-4500 and another router Cisco Linksys E1000 new in a box.The internet provider in my area only provides up to 750KBps. I have a large number of internet enable wireless devices and most of the time the connections is not even fast enoguh to even stream youtube video
I have a customer who has a Cisco 2821 router with software 2821/HSEC/K9 and they wish to upgrade to C2821-VSEC-SRST/K9.From my understanding they want to use the same router but install an IOS with the capabilites it has at the moment but with voice. [code]How do I go about pricing this up and what upgrade sku's will do this?I am not to worried about the memory.Is it just a simple ios upgrade as the srst licenses are on a trust basis?
