Vaio Stopped Detecting Ethernet Cable?
Mar 14, 2012
I live in student halls where we only have connection to the internet via Ethernet cables and for some reason it seems to have stopped detecting the cable. I remember I had the same problem when I arrived and I think we eventually resolved it by disabling then re-enabling the adapter, but this time that doesn't seem to have solved it. It also seems to have been triggered this time by a Windows (7) update, but doing a system restore doesn't resolve it. The cable and wall socket both work and I've tried my laptop in different rooms but it still won't detect a cable. I've checked device manager and everything seems to be functioning properly, but the port doesn't even light up when a cable is plugged in.
View 2 Replies
ADVERTISEMENT
May 11, 2012
I've recently tried to connect my laptop to my modem with the ethernet cable to update the modems firmware but the ethernet lights on the modem isn't blinking and a connection isn't seen on my computer. My laptop is : Vaio VPCEB13FG
EDIT: I think i may have deleted the ethernet driver to reset my drivers but i have no idea how to get the ethernet driver back. Oh yes when I tried the ipconfig in CMD, under Ethernet adapter local area connection i get media diconnected and not much else for that.
View 6 Replies
View Related
May 9, 2012
i own an THOSHIBA SATELITE M300 using WINDOWS 7 ULTIMATE SERVICE PACK 1 and recently my laptop has stopped finding any wireless networks. Other laptops connect via wireless to the hub without any problems so it must be a problem with my wireless card. Ive tried turning off my hub, as well as system restore and uninstalling my wireless device and letting my laptop reinstall it but it hasn't changed anything. my device manager says that my wireless card is working fine.Even i reinstalled the drivers.
View 12 Replies
View Related
Mar 11, 2011
My sony vaio (vista) has stopped working wirelessly. I have tried it at two locations with two different networks and modems and both times it would not work. So its the laptop that must be at fault. I can connect to the internet through the ethernet cable.
View 14 Replies
View Related
Nov 8, 2012
I have a router setup that worked for me for months, suddenly, it stopped detecting the wire connected from the POE adapter.When the wire is directly connected to my pc, the connection works and i have internet. But when thru the router, the WAN Light is not even lit.Btw, just for checking purposes, I tried connecting a wire from my pc to the router wan port, and the WAN light lits up.
View 1 Replies
View Related
Jun 24, 2011
My Toshiba Satellite Pro laptop has suddenly stopped detecting my wireless network. IT detects every other network in the area but mine. Other computers in the house have no problem detecting and connecting.Wireless is enabled, it happens no matter how close or far from the router. The network is set to broadcast the ssid, etc. I have not changed any settings on my laptop or router, this has suddenly started happening. Have updated drivers to no effect.Occasionally, the network pops up when I re-start the laptop. Rarely works and sometimes it will detect the network, then fail to connect, then the network can't be detected at all.
View 1 Replies
View Related
Mar 28, 2012
My sony vaio E series VPCEB34EN ethernet driver does not work. It's a one year old machine. The hard disk crashed and my recovery disc also did not work. So, had to re-install. Now, no working ethernet port.Wireless works fine, but I need ethernet connection for my work?
View 1 Replies
View Related
Apr 28, 2013
Is there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.
View 1 Replies
View Related
May 25, 2012
Sony vaio e series vpceh35en all drivers Ethernet controller?
View 1 Replies
View Related
Mar 12, 2012
i cannot find any ethernet driver for my Sony Vaio VPCEE26FG / VPCEE26FJ , this laptop is bought from japan, and i think that is the problem why i cannot find any compatible driver for this laptop. i use Win7 Ulti 32bitI have been searching for a compatible driver in rougly 5 hours
View 2 Replies
View Related
Jan 2, 2012
I realise many people are having this issue and there any lots of threads about it all, which i have spent hours looking through forums for answers but I am not that computer savy to understand it all...Haven't really come accross the same scenerio as i am having, so here it is: Just brought a Sony Vaio Laptop running Win 7 home Premium. Have a desktop computer running xp which is connected to modem and router...Am running a D-link DSL-502T and Linksys wireless-G broadband Router, model :WRT54G.My issue is i can connect to the wireless network through the laptop but when i switch the wireless switch on the laptop every few minutes the desktop PC will drop the connection and display network cable unplugged, then goes back and fourth connecting and disconnecting every few minutes....as soon as i flick wireless switch off on laptop all is fine again.....wireless works as have another laptop running windows 7 pro and can connect mobile phone through wireless and ipad etc...I have had the internet load web pages but connection doesnt stay on...Does the same thing when i try connecting directly using network cable.
View 3 Replies
View Related
Dec 2, 2012
I purchased the E1200 Linksys Wireless Router on 11/26/12. The router worked fine until today. Without reason, the router stopped reading the internet cable/the port on the router stopped detecting the signal from the cable connected to the modem. I can plug the cable from the modem directly into a laptop and the laptop picks up the signal (using it to write this). I swapped out several DSL cables to confirm it wasn't a cable issue and it does not make a difference. I tried rebooting the router, resetting the router, and yet nothing works.
View 4 Replies
View Related
May 29, 2012
I've tried to attach my external HDD to X3000 router and share entire partition through my home network, but it didn't detect any HDD with NTFS partition and some FAT32 partitions as well. Does it support NTFS partition and detects them to share through network? If not, is there any plan to add this feature to support NTFS partitions? Personally, I think today all media files which are using to share in home networks are huge and big files, usually more than 2GB and require to be stored in NTFS drives.
View 3 Replies
View Related
Feb 25, 2011
I am facing the problem as my CISCO router is detecting the RS 530 DCE cable as DTE 530idb. I am using this cable for X25 link connectivity. The same cable has worked for more than 1 hour with detecting the cable type as 530 DCE, but suddenly it stops the X25 data transfer. After that the cable type it is showing as DTE 530idb.
Below troubleshooting already carried out.
1. Changed the slot, but same output.
2. Removed the cable & reconnected, but same output.
3. Without connecting to the DTE device also, the cable type is showing as DTE 530idb
View 1 Replies
View Related
Mar 18, 2012
"Ethernet Connection has stopped working".Its stopped working again and I've run the Network Test and the results are in the file REG.txt attached. I can connect to the internet via wireless OK but I had wireless turned off to run this test.I've proven the ethernet cable OK by connecting another pc to it which works OK.
View 12 Replies
View Related
Oct 14, 2011
I was just browsing the net when all of a sudden internet lost connection.I am using Windows 7 64-bit Home Edition.I tried these solutions, but didn't work;
---reboot pc
---turn off the modem, wait 10 minutes and turn it back on
---ipconfig /release, /renew in admin mode
---built-in Windows troubleshooting
---updated drivers
---use different ethernet cables
I contacted a floormate (I'm in college) yet his wired internet works. I have tried wireless. It worked.I have been using the connection for months and this is the first time it has happened.url...
View 1 Replies
View Related
Feb 15, 2012
I have an ASUS X58C laptop which has been working OK to the internet via the ethernet cable but it has stopped working.I used the laptop via the wireless connection to access the internet while away from home and on my return I can not connect via the ethernet but I can connect OK via wireless. The results with the wireless enabled are :
C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
I can see that the ethernet adapter(s) are shown as media disconnected but I don't understand how to make them connected. I also don't understand why there are two ethernet adapters or what the Tunnel Adapters are.Before I did the ipconfig command I went into Control Panel/Device Manager/Network Adapters/SiS Ethernet Controller, right clicked and selected the Update Driver Software which searched the internet for a driver and installed it.
View 7 Replies
View Related
Apr 28, 2011
was using windows 7 ultimate OS. last night my internet antenna was hit by lightning. later i switched on my PC and i was to browse internet, but i couldn't connect to it. i don't know whether my Ethernet port was damaged by lightning[CODE]
View 1 Replies
View Related
Aug 8, 2012
I am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.
View 9 Replies
View Related
Jun 28, 2011
We had a storm the power went out when the power came back and I started my computer I had no internet. It is a gateway desktop MFATXPNT YKT 500X bought in 2003. I have tried loading drivers no luck and I have tried a usb ethernet adapter in which the computer says it can't load the drivers.
View 1 Replies
View Related
Jul 28, 2011
I've had the WRT400N for about a year and a half now and just last night it stopped sending out data when connected to my cable modem. I've tried connecting the modem directly to my Mac and it works just fine (that's how I'm sending this message now). But when the modem is connected to the router, I get no data. It connects to both the 5 Ghz and 2.4 Ghz networks, but it refuses to send data through the pipe. I've tried power cycling both the modem and the router to no avail.
View 1 Replies
View Related
Feb 24, 2012
I have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
View 1 Replies
View Related
May 30, 2011
i have a Dell inspiron 1520, the ethernet port has stopped working- no lights when cable connected. this was fine and then just stopped, it is used to connect to hub from time to time when wifi goes down. have tried 3 different cables, no joy, these all work in another laptop. No issues shown in control panel/ hardware. Have downloaded driver from Dell site, still nothing.
View 1 Replies
View Related
Apr 30, 2011
I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.
View 14 Replies
View Related
Oct 12, 2011
After i reinstall my PC, i can't connect my vaio (VGN-TX750P) to internet through internet cable nothing appears in Control PanelNetwork and InternetNetwork Connections wifi is working fine but I can't connect using ethernet
View 7 Replies
View Related
Mar 29, 2011
After trying to communicate between an XP machine and Win7 using static IP and a crossover cable my wireless card stopped working. I did make the mistake of trying Homegroups prior to that.
It says Unidentified network and constantly remains in the Public Profile. Not even WiFi Sync is working...diagnostics reveal a problem with the drivers though several have been tried. From the originals to the latest version...Properties describe the device is working normally?
View 6 Replies
View Related
Mar 26, 2012
Like the title says, the wifi on my wag120n stopped working. It happened suddenly, nothing was changed in the settings. It stopped showing when i'm searching for wireless connections (SSID is still enabled).
View 3 Replies
View Related
Jul 21, 2012
We ran a D-Link DIR-655 for about 5 years on our home network of 7 desktop computers (LAN) and two laptops (wireless) with essentially no problems. However following a power outage last week the router stopped communicating with the cable modem (WAN port failure?). From the web site we determined that the DIR-825 is a fancier version of the DIR-655 (extra 5 GHz transmitter) so we upgraded to a new 825 three days ago. I did not use the wizard on the CD to set up the new router -- rather did it manually because I thought I'd configure the new router exactly the same as the old one -- this was probably not a good idea in retrospect. (FYI our new DIR-825 is a ver. B1 unit with ver. 2.02NA firmware.
After setting the router up -- it lit up like a Christmas tree and I could see all 7 desk top computers (3 are WIN7 & 4 are WINXP) in the LAN and all would go on-line with no issues. (FYI 3 desk tops are directly attached to the DIR-825 and four attached via a switch). However, when I tried to map the network I find that only 5 of the desk tops we assigned to our named home network -- 2 or them could not be mapped as they were assigned to a "public" network. So while they all still communicate with each other two are no longer in our home network. I do not think this was anything that I did -- knowingly at least.
I logged back on the the router home page but I see nothing that clues me in as to what I did wrong.So I'm wondering how the DIR-825 made these "assignments" and what I can do to redirect the router to bring the other two computers into our home network. (BTW one of the two "miss-assigned" computers is WIN7 and one is WINXP so its not a window version issue).
View 2 Replies
View Related
Mar 29, 2011
I have had a WAG320N running problem free for approx 2 months, in that time I've upgraded the firmware 1.00.12 with no issues and has run fine for a month after upgrade. I have 3 laptops connected wirelessly and 2 pc's running wired (through homeplug system) plus TV, PS3 and ipods, all have run without issues.
All of a sudden 2 days ago all wireless connectivity stopped? SSID is still broadcasting and viewable but I can no longer connect with any computer or device. Wired connectivity is working fine.
I've checked security settings, turned off encryption, reset factory defaults, re-downloaded latest firmware and reflashed with no luck. As I said wirless stopped working all of a sudden with no changes to settings.
View 4 Replies
View Related
Jun 26, 2012
My WAG120N router has stopped working completely. None of the Ethernet ports or the wi-fi signal button is lit,power light continues to blink for 10 odd mins and then comes to a rest. Tried to login to admin portal without any success, tried to reset it pressing the reset button in the back without any success.Tried the 30-30-30 reset method without success too.
View 3 Replies
View Related
Mar 14, 2013
Region : Hungary
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP : T-Home
I bought a TP-Link TL-WR740R Router, the setup went smoothly, I could connect to the internet and set up WiFi connection. But after a few hours, I accidentally unplugged the Ethernet cable from the router, and since then, I can't seem to make the router work. (I obviously plugged it back in.) Setup says I have a problem with the WAN connection.I tried rebooting, resting, reconfiguring, cloning the MAC address.The router is sending packages, but receiving none. How could this happen just by unplugging the cable for a second?
View 4 Replies
View Related
Jul 21, 2011
I'm trying to set up a system where a lecturer can sit at home and give his (video and audio) class across the street via an ethernet cable strung across the street. The only problem is he has a mac, and we in the class running it aren't going to leave our PCs for macs!Is there any simple way to connect the mac to PC (without running through a router, as it slows down the system)?If so, what programs will work best for both PC and mac for streaming the video (and are free)[BTW I don't think a 100m cable is too long for the signal.
View 2 Replies
View Related
Dec 15, 2012
What is the best Ethernet cable too run around my house?
View 3 Replies
View Related
