This webpage is not available.Google Chrome could not load the webpage because realm108.c8.castle.wonderhill.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection.Reload this webpage later.Check your Internet connection. Restart any router, modem, or other network devices you may be using.Add Google Chrome as a permitted program in your firewall's or antivirus software's settings. If it is already a permitted program, try deleting it from the list of permitted programs and adding it again.If you use a proxy server, check your proxy settings or contact your network administrator to make sure the proxy server is working. If you don't believe you should be using a proxy server, adjust your proxy settings: Go to the wrench menu >Options > Under the Hood > Change proxy settings... > LAN Settings and deselect the "Use a proxy server for your LAN" checkbox.
I play dragon of atlantis on facebook and I cant get into one realm I can get into any other realm but It is just realm 108 I can not get into. I went to the library to could get into the realm then I came home and still can not get into it. I have uninstalled chrome and reinstalled it and same problem. It also has same problem with fire fox and ie. I have ran ait virus, anti malware software and same problem I have also release and renewed IP address still no luck. This is the only page I can not get into.
I have a network with a 2003 windows server and around 60 XP computers. I also have 2 different gateways. I am trying to access a webpage "eparts.rmpparts.com". When I enter the address it comes up to the page that says "IE cannot display the webpage".I have treid and both gateways and same result. I am also not able to ping the address from the PC within my LAN.I then went to a different network "not within my LAN" and I am able to access the site without any problem. I have accessed it from my phone also without any problems.I have tried to get to this page from the server and also around 5 other computers within the LAN and the same problem each time.I have security settings very low and also the firewalls are off. I tried on a computer that is connected to my LAN with no luck. I then disconnected that same computer and connected it to a different modem not within the LAN and had no prob getting to the site with the same PC.So I know it must have something to do with my LAN but I have no idea what it could be. I have tried everything I can think of and same result each time.
I am having trouble accessing the webpage related to my university (www.uniandes.edu.co) while connected through my router (Belkin Wireless G router F5D7230-49). I was able to access it without problem for the last four years, but recently I can't access it. If I plug in the PC directly to the cable modem, I can access the site. I can also access the website through a proxy server[CODE]
I have AT&T high speed (6Mbps). most of the time it works great. but sometime, links that I visit often does not load. sometime it just loads "This webpage is not available". I have to click links many times or fresh to load the page. Ping google.com is about 35ms..are there any settings on my DSL modem or network router that I can set to fix this issue? my equipments:
My laptop won't open a web page anymore what is wrong? My desktop still opens itwhat can I do to fix it ? When I try to go to the web page I just get a blank screen and that is allIt was working just fine until I installed Adobe pro X
i've had this internet problem that has been going on with a wireless laptop i've had since april. it only happens on this computer, and i've tried many solutions. occasionally, i will try and go to pages on google chrome and an error pops up that says "this webpage is not available." when i play games that are online, they get disconnected as well. i've added google chrome and my other browsers to the firewall list and i've also changed the DNS server. when i use the troubleshooter it says something like "router, or modem is not connected to the internet. i've even downloaded the "fix it" program and it detected no problems
My laptop now is using windows 7 operating system. When i want to use wifi it connected but cannot access the webpage. I am using wifi from my android device. Before this my laptop is working normally. I can access to the webpage like usual. But since three days ago it happen. what is going on with my laptop or my android device. But my android device can access to internet normally.
I have a notebook with Windows XP SP2 installed onto it. I am trying to access the web either using Google Chrome or Internet Explorer but no lack.I have tried almost everything such as:
1. Delete Cookies / Browsing History. 2. Reset Internet Explorer Settings. 3. Checked LAN settings. 4. Checked Proxy Settings. 5. Checked for Virus.
When I select to logon to the computer with Safe Mode then Internet works. In normal mode not... When I ping any website I get reply with 100% success.
I cant access microsoft webpage. I have fresh copy of win XP pro SP3, IE 8, and connected through an updated Vodafone ADSL modem through ethernet. Strange thing is, I can access bank, tv over internet, etc. except MICROSOFT webpages.
Can open (url) in work computer but not at home - Message coming up at home that it will be closed for maintenance and that was last week and has since finished now as i can open site at work but not at home
I am getting the error message "internet explorer cannot display the webpage", my computer tells me i am connected to my wireless and that internet is available but it will not open any webpages, no matter which browser i try. I have disabled all firewalls and run diagnostics but it just tells me there is a problem with my router, despite the connection being perfect for other devices. My computer is relatively new and i'm sure its not a virus as i have run different anti-virus and malware softwares.
I am trying to configure a Linksys RV042 VPN router as a simple router. I want to connect it to one of the ports from a CiscoASA5505 router because I need to connect 4 additional PC's and the ASA is out of available ports.I am trying to connect it through an ethernet port from my laptop.At first I configured the TCP/IP settings as getting the IP and DNS's automatically and but I was able to enter the setup by entering the default IP address (192.168.1.1).After 10 minutes it got disconnected and could not connect again.I get Status: Limited or no connectivity.If I try to type the IP address manually (192.168.1.1) I can ping the router successfully but the setup webpage never opens.what I need to do in order to access the setup webpage when I connect the router directly to my laptop?
I cannot access one particular website - one that I regularly use. I have checked with other users - they can access the site.
This has been going on now for about 2-3 weeks and evertime I try to access the site I get the following message: "Internet Explorer cannot display the webpage"
My laptop says that it is connected to my home wireless home network but no web pages seem to load yet when I connect to my neighbours connection using the same machine it connects and the browser loads instantly? I have made sure that the detect proxy settings box is ticked, and tried to reset my router, could it be a problem with my router and not my laptop?
I'm trying to connect to 192.168.1.1 in order to set up a password. When I type it in, I receive a message, Internet Explorer Cannot Display Webpage. Why can I not connect?
I have a lap plug into a wired connection and it has stop working, i have ran the windows fix program which didn't work, i plugged a different lap top into the wire and that works fine!
I've just recently upgraded a Cisco 877 to 887W router.
I basically copied most of the config across to the router with no problem.
ppp chap hostname and password all ok. ATM and Dialer1 interface comes up.
The problem I'm having is when I open Internet Explorer up, default homepage is Google. Google loads up fine, type a search is fine but when you click on the link or type URL, for example BBC News or Sky Sports, it takes a long time to load or times out (Page cannot be displayed)
DNS servers configured on Cisco router are: 8.8.8.8 and Virgin's DNS servers.
NSLOOKUP in cmd prompt it returns IP add no problem. however in web browser it fails except for Google.
However, with the same config on a 877 everything works perfectly...
I run into a 1230 that would have a Web page completely different than the usual one. Instead of getting the normal User/pass menu and then the menu on the left side frame, you get this:
Cisco Systems Accessing Cisco AIR-AP1220-IOS-UPGRD "1200AP"
Web Console - Manage the ap through the web interface.
Telnet - to the router.
Show interfaces - display the status of the interfaces. Show diagnostic log - display the diagnostic log. Monitor the router - HTML access to the command line interface at level 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 Extended Ping - Send extended ping commands.
Show tech-support - display information commonly needed by tech support.
Everything appears to work ok in that peage excepting the "Web Console" link which would probably go to the usual home page.Getting to it from the console, everything looks to be ok. You can configure the unit using the IOS and the unit apparently works fine. I have 12.2(13) JA3 running.I defaulted the unit, reloaded the image... I'm still getting that home page.
I have just started my installation of Prime 1.2. I have the OVA loaded (NCS-APL.1.2.1.12-K9) and I went through all of the setup. I have the webpage loaded but unable to get past the Root login. I then tried to change the password using the "ncs password root password password" command but get the error message "Execution failed: Cannot find user: root". I have seen some people talking about the wrong OVA file but that was for Version 1.1 I think.
192.168.0.1 "HTTP 401 unauthorized access: Authorization is required to access the configuration server. You must enter the correct username and/or password."I am trying to set up my Netgear wireless router. I have my username and password, but never get the chance to type it in. My Default Gateway is set to 192.168.0.1, but when I type it in the web address, I get the HTTP 401 error message above. I can access the internet through LAN cable now, but would like to get wireless set up to do so..
Windows IP Configuration Host Name . . . . . . . . . . . . : User-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid
For the last two weeks or so I keep getting kicked out of websites I have went to on more than one occasion. IE just says cannot display webpage and firefox keeps saying connection timed out. I have been researching this issue through other forms. Here is what I have tried so far to fix this issueReset all cookies, history, etc Renewd IP System Restore I am not running off any proxys Did a full compuer scan and removed all threats/virus' Reset SSL's Uninstalled Windows IE and Firefox and reinstalled Unplugged Router Put cookies/firewall settings to minimun or none and tried to access websitesThere is no specific trend towards the webstites I go to, that I can see at least. One is my bank account and another is a clothing store, little things like that here and there. I can't get on any mozilla websites for tech so I have been googling it through my Android. I even did a diagnostic through windows on a specific website and it said that everything checked out and that it was a web site issue, which I find hard to believe since I can access it through my phone
I connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows 7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
I went to Tools, Internet Options, LAN Settings, and I checked the First two boxes. Where it says "Address" I put in [URL]then I went back, and went on the Internet but It still says ---"Internet Explorer cannot display the webpage" Then I went back to Tools, Internet Options, and took off [URL]then tried again, then I went back to the Internet but it still said the same thing saying-----"Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" and it ---started detecting the problem.. and when it was finished detecting it said...---"Windows could not automatically detect this network's proxy settings."
You only want "Automatically detect settings" checked. The second check box if for a configuration script or the like to setup IE settings. That is really only used by company's that want specific home pages and other settings set to match their networks.If anything is checking in the "Proxy Server" area, I would uncheck it as you won't go through a proxy since you are connecting to a hotspot. It is pretty rare for public locations to use proxy servers.I connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
I did nothing different to my computer. It was online fine and then an hour later when I came back, it wouldn't load any pages. I have a DSL modem and a wireless router that also connects another family member's desktop to the Internet. (As well as our phones via wifi.). The connection is fine on the other PC through a wireless adapter (both are desktops), and on the wifi the phones work perfectly so I know the modem and router aren't the problem. But even though my desktop says it's connected (not wirelessly, it directly connects to the router.), no pages will load. If I use chrome browser it eventually tells me this webpage is not available regardless of which page I try to load, or sometimes it's telling me no data received - unable to load the webpage because the server sent no data. Yet oddly a couple of times after forever it seemed to half load a couple pages. Internet Explorer just keeps trying to load pages forever with blank white page as a result.
Is it possible to have web browsers load a specific file upon first launch when connected to a certain network (i.e. like public wifi hotspots automatically redirect your browser to their login page when you first connect). Would I be able to create a page that would act as a welcome page to people who have connected to my network (and probably to myself too).I want it to act as a welcome page to my network - to be honest, I don't know why I need it, it just seems fun to find out if I can (I sound so geeky now)
I got new internet installed in my apartment, intending to use the same WAP as I did on the old network. The only thing that changed from the old network to the new is the cable modem, which is identical to the old one. Currently, the WAP does not connect to the internet, although I can connect through an ethernet cable to the modem itself. My theory is that the modem is set to a static gateway, while the WAP is not. To try to fix this, I attempted to access the default gateway at 192.168.2.1. Of course, I couldn't remember the stupid password, so I tried different passwords with no results.
Now when I try to access the same IP, it loads for a few minutes, then says 'cannot display the webpage' and gives an option to diagnose connection problems. I know the internet still works, because I can go to any other page I choose. Diagnosis produces the following: 'Your computer appears to be correctly configured, but the device or resource (192.168.2.1) is not responding' (no error code given). Maybe this is a stupid question, but was there a limit to the number of times I could try a password? Additionally, I can't get to 192.168.2.1 on a different computer, on a different network, either. When I try the ipconfig command, the default gateway line comes up blank.
