Windows 7 Not Detecting Any Networking Hardware
Jan 4, 2011
This is my first post in which I'm looking for some assistance to the above problem I'm having with my new Packard Bell iMedia PC. I am unable to connect to the net through this PC, however, the net connection is working fine as I am currently connected wirelessly via my netbook.The icon on the tool bar has a red cross indicating that I'm not connected, when I click on the icon it tells me no connections are available.When I try to connect to the net via the PC through the control panel, a message pops up saying' Windows did not detect any networking hardware'. When I try and acces the basic information and set up connection page, a msg states 'The dependency service or group failed to start.
View 19 Replies
ADVERTISEMENT
Jan 21, 2012
Bought a new com done setup put a disc in thought it was Microsoft works however it was windows 7 and deleted the other version on there and put the new one on now it says Windows not detecting any networking hardwear. And I have all the yellow ! On network adapters.
View 19 Replies
View Related
Aug 27, 2011
When i try to go online it says that i dont have a connection, and that it does not detect any networking hardware. How do i fix this?
View 7 Replies
View Related
May 30, 2012
Just re-installed windows on a laptop i got, i got all the drivers installed, but i cant seem to get the wireless card to show up, i know it has wireless because it was my moms laptop before she got a new one. Ive gone to dell support site and literately downloaded all the drivers on the page. Device manager doesn't seem to be detecting the card at all, the dell Wlan utility wont even start ive reinstalled the driver multiple times i even tried the intel site for drivers.
The big problem is i don't know what wireless card it is and its hard to find out because the support pdf for the laptop shows multiple possible cards.
[URL]
View 6 Replies
View Related
Jan 19, 2013
my new laptop is not detecting my modem.its windows7 os
View 1 Replies
View Related
Dec 2, 2012
I am using a gateway nv53a laptop with windows 64 bit. I actually have 2 of them. Internet worked fine for a couple years then it just stopped. I cannot connect through wired or wireless. Icon says no connections are available. When I trpubleshoot it says there is no driver installed. I have already tried downloading and installing the drivers. In the device manager it doesn't even have network adapters listed unless you go to view and show hidden. Then it only lists a bunch of miniports and a teredo tunneling pseudo interface. No network adapter is listed. I have do a factory reset and have even taken the wireless card out of my other laptop and installed into this one and it still doesn't recognize it. Running out of options.
View 5 Replies
View Related
Jan 10, 2013
Me and a friend just installed Windows 7 on his computer and now it's not even detecting an internet connection. We're using a direct connection with an ethernet cable and his laptop is connecting just fine. Before we installed Windows 7 it was connecting just fine. We've tried reinstalling
View 6 Replies
View Related
May 17, 2012
I have Lenovo N100 , today i installed a new xp window but after that my laptop is not detecting network.
View 1 Replies
View Related
Apr 14, 2012
I have a Inspiron 1520 which came with windows Vista and I recently did a Windows 7 clean installation. There were no drivers specified for Windows 7 in Dell Driver Download so I installed Vista drivers, connected to internet via LAN Cable and upgraded most of the drivers.
WiFI networks could be detected when installed for the first time but after a shutdown it never detects again. Sometimes it randomly detects, I tried using the laptop for 2 weeks now and only 2 times the WiFI automatically came up.
There is a switch to pull after turning on WiFI radio, which will display the list of WiFi networks in a window, that Switch is not responding now.
View 5 Replies
View Related
Apr 18, 2012
I wan to access a folder shared on windows 2003 server 32bit from a Windows 7 64bit ultimate WS. but after asking password, beside giving correct password, it asks again and agian and do not show folder
View 1 Replies
View Related
May 30, 2012
My laptop (Win 7 x64) can currently access all the shares on the XP computers in my home network but,although I can see it, I cannot access the laptop from my main xp computer. I haven't tried to access it from the other xp computers downstairs. I have read the guide on this site as well as 3 or 4 other threads on this subject but am unable to resolve the issue. Completing the network setup so that I can look into my laptop from this main xp computer. My laptop has a wireless internet connection but I also have it plugged into my wired home network for sharing. I will provide other details as needed. I suspect that some essential services for file sharing may not be running on the laptop, but I'm not sure.
View 19 Replies
View Related
Sep 11, 2011
Trying to network between a Windows 7 computer and a Windows XP computer is possibly the hardest thing I have ever done.I have googled for hours and hours and none of the solutions seem to be working.I will try to explain what I have already done. Although I have done loads and I am sure I am missing some things.I have a Windows 7 laptop and for this exercise I shall call it WIN7. I have a Windows XP computer and for this exercise I shall call it WINXP.Both computers are in the same network which I have called SAMNETWORK. I have enabled permission to Everyone in folder sharing settings on WIN7. I have turned on Sharing and I have made myself discoverable with no password set on Network and Sharing Advanced Settings. Both user accounts on the XP and 7 machines are the same and both passwords are the same. I have turned all firewalls off. The WINXP computer has sharing enabled.
I have done a lot more things including installing LLTP (sp.?) and changing registry entries like Lsa/anonymous something like that (can't remember the actual directory) but I have changed registry entries as I have read elsewhere on the web and I have changed the network from home to work but that did nothing etc. etc. But everything that everyone suggests is just not working and I have been looking for about 4 hours now so you can imagine I have tried everything I have found!Anyway, my 7 laptop can see WINXP but when I click on it, it states that Windows cannot access \WINXP. The WINXP computer can see shared folders from WIN7 but it also states that it is not accessible. However, I did once get the WINXP computer to access the WIN7 shared folders. However, that doesn't even work now. I need the WIN7 to access the WINXP files. [code]
View 1 Replies
View Related
Dec 25, 2012
I am trying to add an XP computer to our (already) Win7 computer.Now...I have connected the xp computer to the external modem that gived the 7 it's signal by way of ethernet cable). I went through changing and matching up the workgroup names, and.....turned on "Network Discovery" on the 7 end....after everything is said and done...I DO get the internet signal to the xp, but knock out the 7, altogether.
View 4 Replies
View Related
May 4, 2012
I am trying to link a Windows 7 machine with a laptop running Windows XP. The workgroup on both computers is the same. On the Win7 machine, I have a couple of folders set to be shared. The first is the C Drive and the share name is C-drive. The second is Quickbooks that I have named Quickbooks. On the XP machine, I went to map network drive and in the blank typed \Remote1C-drive. It asked for username and password and just like that we were connected. But I can't see all of the files on this drive. I don't even see all of the folders - one of which is Quickbooks. So I tried \Remote1Quickbooks and Windows XP couldn't find that path even though I'm positive that folder is shared on Win7. So no matter what I try, I can't see this folder on the XP machine, I even tried copying this folder to other locations around the computer and setting up shares in hope that something would work, but it never did. So I went back to the C Drive share on the XP machine. I tried to go in reverse, creating a file and putting it on the root of the c drive (I did this on the XP machine, but the file should have actually been located on the Win7 machine. When I check Win7, the file didn't exist. So I tried the other way. I right clicked on the c drive in Win7 and created a new bitmap image file. Back to the XP laptop, that file doesn't show. But if I look at the c-drive on Win7 from the xp machine, I see several other folders and some of them like Program Files contains actual files. But some of them are just empty such as \Remote1C.
View 6 Replies
View Related
Jun 19, 2011
this is crazy - when i came back from out of town i tried to see if my problem still existed. it did - the win 7 laptop still could not "see" the win xp computers on the home network but all of the xp computers could see the win 7 laptop. just before sending this reply, i tried it "one more time". wa-lah, the laptop can see the other computers. this happened once before, it was seeing them, i had to leave the system and come back the next day - when i came back, the problem had returned. i did notice when i came back from out of town, my power had gone off and came back on- but this was b4 i checked it only to find the problem was still there, as just mentioned, i tried it just b4 writing this reply and the problem was no longer there. i just rebooted the laptop and as we speak, i can see all 3 of the xp computers from the win 7 laptop. i really can't make any sense out of what's going on but am beginning to think its in the modem.
View 5 Replies
View Related
Sep 13, 2012
So I have a desktop connected to a Thomson TG782T via the ethernet cable, (this desktop is running Windows7). I also have a laptop which allows me to use the wireless modem for the internet, (Windows XP sp3) but what I cannot seem to do is set up a network between the 2 pc's to share files, printer, and also game together.
View 1 Replies
View Related
Feb 21, 2013
I just got a new computer at work and it has Windows 8 on it. My old computer ran on XP and was connected to two different computers with access to the My Documents folder on each computer. That is all I need access to. I have tried everything to get my new computer set up so that I can have access to those two folders as they are extremely important for my job. I mapped the network drives from both computers to my new one and they access to my computer. When I worked from the Windows 8 computer and tried to access those computers I received an error message saying that access was denied and to contact my network administrator. I have access to other folders on the XP and Vista computer except the folder that I need to get into. I have brought in two different people who do freelance work and neither one was able to figure this problem out. For four days that I have been unable to properly do my job and I have just been emailing files and documents to myself. The XP and Vista computer do not need networked together either.
View 1 Replies
View Related
Nov 2, 2011
I need to connect a OS2 pc with Windows Server 2008. However, I have tried the Netbeau (which can work in connect with Windows Server 2000), I cannot install the Netbeau to Windows Server 2008.
View 2 Replies
View Related
May 16, 2011
I have 2 computers running windows 7 home premium and wireless enabled bluray player. One of the computer is desktop and connected to router by wire. Another is laptop and is wireless.Bluray is wireless.I want to establish a network (sharing among all these 3 devices) so that i can stream media from both of the computers to the bluray. At the mean time it would be great to be able to share files between 2 computer when needed.I checked it on google, it says creating a homegroup. I did but another computer does not give me option to join the group, it also has option to create.
View 6 Replies
View Related
Jul 12, 2011
My problem is that my XP network cannot access my Win7 server, but its not the same problem that has so many solutions around on the internet.Here is my situation:I have 2 networks in my office.
-Network1 consists of 3 WinXP machines connected via Router1 to Modem1 to the internet.
-Network2 consists of 7 64-bit Windows7 machines connected via a Switch to Router2 to Modem2 and then to the internet.
I also have a server machine running Windows7 64bit with two network cards. One NIC is connected to Router1, the other connected to the Switch.All of the above machines are all under the same work group: WORKGROUP..My Windows7 machines on Network2 can interact fine with the server.However, my WinXP machines cannot access the server "most" of the time, I've had a rare few occasions where it magically worked.
View 4 Replies
View Related
Feb 13, 2012
At my office we do business that requires us to use a OKI Microline 320 Turbo printer. We have had the two computers set up to be able to both print off this printer with no issues until recently. The computer which was hooked up directly to the printer crashed, and we replaced it. Until this point both computers were running off Windows XP Pro, but the new computer is running Windows 7. I can find the printer on the XP computer, but it says that the driver on the printer's server is incorrect, and asks me to direct it to the proper driver. This is where I'm having issues, I know the driver is on here as this computer was connected to this printer before, and when I try downloading the driver direct from the website it tells me that the driver is native to the XP, but now it won't recognize the driver and I don't know where to direct it to
View 2 Replies
View Related
Aug 5, 2011
I have a problem that ocuppied a lot of time. I have a new laptop, a DELL N7110 that comes with an FreeDos. I have installed the Windows 7, but i can't make internet to work, i even tryied to get a driver from Dell official site, but nothing. If i enter in Device Manager, at Other devices, all the options (Ethernet Controller, Network Controller, PCI Simple Communications Controller, SM Bus Controller, Universal Serial Bus (USB) Controller) are with a triangle with an " ! " mark.
View 3 Replies
View Related
May 14, 2011
a friend of mine has a USB printer (no WiFi and no Ethernet port) and is trying to use the printer from two different computers, without success. He turned to me for advice but I'm not really much use with networks.He's got the printer wired via the USB to his Windows 7 computer and that can print fine. But his Windows Vista computer shows the printer as offline no matter what he does. Both computers connect wirelessly to a router and have working internet connections. Both computers have the drivers and software installed (Epson RX520) and if he connects the Vista computer directly the printer via USB it works fine too. Both computers have fille and printer sharing activated. He just can't get it all networked together.He says it all used to network fine when he had his old desktop running XP but since replacing it with a Windows 7 system it will only work on one Computer or the other, not both.
View 2 Replies
View Related
Apr 14, 2012
Recently my computer will not connect to wireless internet and when i plug in the either net cord directly it still will not connect.. i have tried to reinstall windows 7 but it still will not work.. i am running windows 7 home premium on a Dell Alienware m14x..
View 1 Replies
View Related
Jul 22, 2011
I recently re-installed Windows 7 and I can no longer connect to the internet because I am unable to find the network, after checking my device manager I need to update drivers for ethernet controller among others and am unsure of how to do this with no connection.
View 3 Replies
View Related
Nov 28, 2012
I have a small mixed peer-to-peer network comprising 2 Win7 PCs, an iMac and a Win7 laptop and 2 little file servers: a Netgear Stora and a LaCie-2big.Stora is correctly listed under the Network part of Windows Explorer, but LaCie isn't, although I have been able to map a drive to a share on LaCie.No problem accessing files etc.Why would the LaCie not be displayed in the Explorer file tree?
View 2 Replies
View Related
Sep 25, 2011
I cannot seem to locate a driver for the "Nvidia nforce networking controller." ALL information I can glean from the computer does not show anf further information or part numbers or numbers after "nForce".
HP dv6704nr Pavilion Entertainment PC
View 3 Replies
View Related
Apr 26, 2011
Running OS X 10.5.8 on an old MacBook Pro on a wireless network. It might be relevant that I recently upgraded the wireless router and the DHCP-assigned IP addresses changed. Before that, everything worked reasonably well.
I can connect to the MBP from Windows 7 computers on the network, logging in with a user name and password, and access the files there as expected.
But the MBP disappears from Windows Explorer after a few minutes. I can usually add it back (always checking the box to remember it) but it just keeps disappearing. Sometimes when it disappears, I can't add it back and when I try, Windows Explorer says, "can't find."
How can I get this share to stick?
View 1 Replies
View Related
May 23, 2012
I have a Windows 7 HP with intel pentium my Internet only works in safemode with networking. Orignially it worked when I used internet explore 64-bit but eventually that stopped working as well. I have 3 accounts on this computer and I need safemode with networking for all of them. I do have both mcfee and norton anti virus i was told that may be the problem however, I do not know how to install either of them.
View 14 Replies
View Related
Apr 10, 2012
have a Dell laptop running Windows 98 on it and I'm trying to get a Linksys WPC54G ver. 4 PCMCIA adapter working on it. I finally got the adapter installed along with its device drivers and other required software such as IE6 and I have it connected to the router in my house. The only problem is, the card shows a connection between the card and the router but a broken connection between the router and the internet. I can't seem to figure out how to fix this considering all of the other wireless devices in our home (iPods, laptops, phone, tablets etc) connect to it which makes me think I have to designate (I'm no good at networking) an IP address or DNS like you would be able to on WinXP, Vista, or 7.I had a friend come over and he was looking through the admin settings on the router and said that it only supports WEP encryption, not WPA. The router is the standard router that Verizon gave us when they came in to install FIOS. The card says it supports WEP and WPA (Radius and PSK whatever that means) and I have it set to WEP and entered the password but I can't seem to get it connected to the internet. Would it work if I bought a new router or is there some kind of thing I need to punch into the Internet Protocol properties like you would on later OS'?
View 2 Replies
View Related
Nov 28, 2012
INS 560 working fine until Windows Update installed recent Windows 7 updates.
After restart I now have a red 'X' through the Tray Connection Icon and no networking (LAN & Internet).
The Status of the Network Adapter is 'Working Properly'.
System Restore rolls back okay to before updates but as soon as Windows Update runs we have the same problem.
I've re booted into Ubuntu and the Network Adapter works fine.
View 6 Replies
View Related
Mar 14, 2011
If I have two servers, one running Windows Server 2003, and one running Ubuntu 10, what would be the best way to 'map' one's drive to another? Either way is fine. They are each in a different state, and each have an external IP. I just need to do some processing on the Ubuntu server, then write the file either to its own drive, and have the web server (Windows) read it, or, have it write to the Windows HDD, and have Windows read it.
View 2 Replies
View Related
Jan 17, 2012
How i can download Sony vaio driver for win7 for wireless networking for sony vaio VPCEA31FX
View 1 Replies
View Related
