I was on the computer, it went into standby due to low battery. Turned it back on, and it wouldnt connect to the net as it couldnt find any connections. Tried repairing - to no avail. Checked all my networks were working, and enabled one that wasn't. Restarted computer still no connections being found to connect to.Windows XP, Asus, Service Pack 3, Version 2002.
i cannot seem to find my wireless network card in device manager? i have tried to download the driver from toshiba but it still dosent seeem to be sorting it. i am having to do this because i have performed a fresh install of windows 7 on my laptop.
I'm using Windows 7, and when I lived at my house I was able to connect to wireless networks without a problem. I just moved today into my brother's old apartment and for some reason I can't connect to his wireless network. I can see it along with a number of other wireless networks, but I'm unable to connect to any of them. When I attempt to connect to a network absolutely nothing happens. Typically at the bottom right corner of my screen something will pop up saying it's trying to connect, but for some reason that isn't popping up. I know it's not a problem with the router because I'm unable to connect to any of the networks, and I also had no trouble when I tried to connect to it with my laptop.
Windows XP on an older Dell Latitude. All wireless settings appear to be on, yet "no wireless networks are found in range" All other devices in the house see the same 3 networks (mine, mifi, and next door), so this is specific to this machine.
Also, I normally keep this laptop docked, 95% of the time, and earlier in the week disabled the wireless (right click on icon, disable) as I normally do when connected to the dock, since it seems to perform faster (no testing, just my opinion)
Other factors: The computer got undocked without normal undock procedure taking place.
Don't know if this is related, but the sound wasn't working either the last few days I have redocked, rebooted, restarted, checked every possible config I can think of, checked the router to be sure that my device was still listed, etc.
I have a desktop with windows Xp and I too have no wireless networks come up in the box on the right hand side, I know the wireless Linsky cisco wifi is working as I have connected it to another laptop with Vista, but have tried everything to get it wireless and nothing works the Desktop works fine when hard wired?
i have linksys network monitoring installed on my pc but have been using windows xp to monitor the network. However, after turning on the linksys monitor yesterday, I cannot go back to windows xp. When i do, I cannot view available wireless connections.
I am using Windows Vista.I work in a small office and our old computer guy set up our network. Not sure why, but he "hid" the two available wireless networks so they do not show up as available. How do I go about "unhiding" them? He left a folder on my computer that says "main router config" but it is a .bin file and I cannot open it. I did find out what our IP address is, but when I type it in the URL it does not show up.
I've formatted my computer(Windows 7 Ultimate 64bit), then I downloaded my wireless adapter driver from my manufacturer's website, installed it and tried to join my home network but it couldn't connect it(or my neighbor's network, which I could access before formatting the computer).
But I am connected to the internet somehow. There is no ethernet cord connected to my computer and the ethernet adapter is disabled. Also, when I add an SSID to my preffered networks list, it appears, but once I click OK, and bring up that same screen, it is no longer there. Yet, I am still connected to the internet. Wireless Zero Configuration is ON, The wireless adapter is ON, I am connected to the internet as I am typing this How do I get Windows to populate those two lists (the preferred wireless networks and available networks lists)?
A few hours ago, I just restored my laptop to factory settings. Once it was done, I tried connecting to the internet but the computer could not detect ANY wireless networks!I already know it is not the modem or router because I have a Macbook Pro and two HP laptops that connect perfectly fine to the modem. I also made sure the wireless is on. The laptop with the problem is a Toshiba Satellite l645. It's running on a 64-bit Windows 7. When I try to look up wireless networks, it only shows 'MOBILE BROADBAND CONNECTION".
Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersNguyen Family>ipconfig/all Windows IP Configuration
I've a Dell laptop with Windows XP. I was able to connect to my own secured wireless network. Suddenly no networks are found anymore where my other laptops are able to find wireless networks. Repairing the wireless network connection does not resolve the problem.how I can find my wireless connections again?
I switched to Intel(R) PRO/Wireless 2200 BG by mistake and now I can't get connected through my wireless! I did not mean to do this, but I have not been able to switch back to Windows to control my wireless.
So I recently took the WMP54GS ver 1.1 wireless adapter out of my old XP computer and put it in my new Vista 64bit computer. I successfully installed the adapter, downloaded the drivers (WMP54GS-v1.1_v184.108.40.206_Vista_dr), and unzipped them on my C drive to their Linksys Driver folder. When I go to find available networks it says "Windows cannot find any additional networks," and when I try to set up a wireless network it shows a blank window and says "an unexpected error has occurred." I can see the adapter in the device manager, so it obviously installed correctly.
We have installed Cisco Prime 4.1 and we have discovered all the devices of our network. Although all devices appear as known both in Monitor and in Inventory, some of them are not being monitored correctly.For example, in the Known_Device_List Report, I have a device named 'Switch1' with IP 'x.x.x.' but in the monitoring, it shown by the name 'Switch2' with the same IP 'x.x.x.x'.
It seems that the DFM database doesn't get correctly this device from DCR, but in the LMS 4.1 version there is no option to delete this device from the DFM. I already tried to rediscovery devices throught CLI by the dmctl -s DFM invoke ICF_TopologyManager::ICF-TopologyManager discoverAll command, but with no success.
I am experiencing an issue with end host being discovered on a cisco 4510. Anything connected to modules 9 or 10 are not discovered in User Tracking. The switch is running: Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.02.01.SG RELEASE SOFTWARE (fc4).
I can't get the connection to work between my laptop (Windows 7) and my Xbox360. I am on a college-based connection as I am away at school. I can't find the router IP or how to even go about finding it. What I've tried:
- Bridge-ing the connections, no success.
- Upgrading the drivers on the ethernet side, no success.
- Enabling "Internet Connections with ICS", no success.
I use multiple computers in my house, I was just wondering, how would I go about connecting to 2 different networks on Windows 7 simultaneously?I have a router/modem downstairs which is connected to the internet & all of our computers, and I also have a modem/router in my bedroom that isn't connected to the internet, but I'd like to use it to share files and other things throughout my house.I've quite easily managed to connect to both networks at the same time, but as soon I connect to the wired network (the one without internet connection) I lose connection to the internet, even though I'm still connected to the wireless network which is connected to the internet.I've read a few different articles and posts about this same issue, but I can't find how to be connected to both & still have a connection.
I have a Windows 7 Pro Desktop with an on-board Ethernet and an Axis USB To Ethernet adapter. The on board Ethernet is configured as dhcp and obtain the address 10.162.146.123 with 255.255.255.0 subnet. The Axis USB to Ethernet adapter is static ip configuration with 10.38.25.37 and 255.0.0.0 as subnet. Under the adv settings I have also another ip 220.127.116.11 with 255.0.0.0 subnet. When the Axis is communicating 10.38.0.1 network I can not access the internet using the on board Ethernet 10.162.146.123. I have to disable either one of the cards to access one network at a time.
I'm running Windows 7 and I want to share folders with other users on my University network. I have the sharing enabled and people within my broadcast domain (the dorms) are able to access my shares. The problem occurs when trying to access those shares from academic buildings which are in a different broadcast domain (and are part of a different VLAN).I have verified with Wireshark that the requests to access the shared media do reach the Windows 7 computer, but for some reason it doesn't respond.
I have the wireless switch turned on and the wireless router is set up correctly - I know the network name, encryption & password.The same setup has worked fine before, but now the laptop isn't letting me connect to it, or even try to connect to it.The internet works perfectly if I connect the ethernet cable directly; and I can bring up the wireless router's settings with 192.168.1.1; but the internet doesn't work when I remove the cable. I looked on google to try and find the method of bringing up the available networks, but it won't work for me. When I hover the cursor over the icon on the taskbar, it says "not connected - connections are available", but nothing happens when I click on it. I tried moving the cursor to the bottom-right corner of the screen, clicking on Settings, and clicking on the network icon with "Available" written underneath it, but again nothing happens.
I've also tried this:
-right-clicked network icon on taskbar, opened Network and Sharing Center
-clicked Set Up a Connection or Network
-clicked Connect to the Internet - nothing happens and the window crashes, I have to CTRL+ALT+DELETE->task manager->restart Windows Explorer
-clicked Manually Connect to a Wireless Network - I enter the details of the wireless network, then it says that the network already exists; I choose to Use the existing network, open the "connect to a network" dialog so I can connect, but then nothing happens. It doesn't crash this time though.
the virus is no longer a problem. Now, I cannot get the computer to connect to the internet via wireless OR wired connection. The computer will connect to the router and I can see other computers on the network, but I continue to see the warning triangle that says "No Internet Access." When running the diagnostics on the connection I receive "Windows could not detect the networks proxy settings."
I have a network domain with 2 domain controllers running windows server 2008. At some point the DNS name for one of the servers got messed up and they stopped talking to each other even though they are on fixed IPs. The DNS problem has been fixed, but they haven't started communicating again. While the DNS was messed up the domain controllers kept running a different copy of the network. The DFS stopped replicating, the users lists fragmented and the network separated into two "shadow domains" with the same name. DC1 says it is healthy, but it claims DC2 is offline. DC2 claims it is healthy but DC1 is offline. I don't even know where to begin repairing this rift.
I am running 32 bit Vista Home Basic SP1.I cannot get online. When I hover the mouse over the network icon in the notification area, it reads, "Connection status unknown. The dependency service or group failed to start". When I try to diagnose the problem, I can't because the Diagnostics Policy Service is not running. When I try to Start the service, access is denied (Error 5). Same scenario for the service DHCP Client. When I click on Start/Connect To - I get the msg Windows Cannot Find Any Networks Meanwhile, I keep getting warnings that my firewall is not enabled. When I try to enable it, I get a message that the Security Center can't turn it on.
Windows Firewall is not listed in services.msc.I ran a full Malwarebytes scan and it found nothing wrong. I did a system restore to several days before the problem, but even though the restore completed successfully, it didn't change my (non)results.The Network and Sharing Center does not display the familiar PC monitor icon with a line to the Network and another line going from the Network to the Internet. Instead it just has the word Unknown with the caption the depencency or groiup failed to start I have heard that this might be due to a permissions issue, but when I use regedit and navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServices and right click on Dhcp, select Permissions, I get an error when I try to add anything (either Local Service or Network Service).
The msg is c:Windowssystem32adsldp.dll is either not designed to run on Windows or it contains an error. Try installing the program again..I have run sfc /scannow as well as chkdsk /f. Scannow reported that it found some problems but was unable to fix all of them. Chkdsk found and corrected about 10 errors, but neither of these programs worked with the issue.Additionally I have downloaded and installed Process Monitor on the PC, but the amount of information displayed is overwhelming, and I'm not sure what to check. Every time I try to start DHCP I get about 200 lines of info on the screen.
When I open a command prompt and run ipconfig /all, I get that DHCP is running, although it is not. I get the bogus ip address of 169.254.... I get a default gateway of zeroes.Is it possible that this behavior could simply be the result of a bad NIC card?Can I possibly run an in-place upgrade from Vista Home Basic to Vista Home Premium? If it's a Dell PC and I have the Dell Premium CD will it ask me for the product key? If so, will the key on the Basic PC work?
I have tried restarting my laptop multiple times (something that usually works for me in terms of reconnecting to the internet) but that didn't work. And like i said it does not recognize a single wi-fi network while my ipod, phone, and the other computers in my household recognize our wi-fi and our usual neighbors wi-fi without any problem.I was torrentingsome music yesterday, and may or may not have stumbled across a bad site with a virus, but that's the only conclusion I could make.(Currently posting this on my brother's computer)I need to get my connection back and get online again asap?
sometimes my net will randomly dc and wen i trouble shoot it says "windows could automatically detect this networks proxy" and then when i go to diagnose it says "your computer appears to be correctly configured but the device or resource (dns server) is not responding.
I have an Acer 3810T laptop and am running Windows 7 on it.The problem I've had is my WiFi has been unstable. For example for 5 minutes or sometimes up to an hour I can easily find wifi networks in range of my laptop but then out of nowhere it disappears and I don't find any networks but any other WiFi device will find my router so I know it's laptop related.I did some research on Google and found out this is an issue others have had with Windows 7 and it seems to be something to do with when updates are installed. I followed the advice to remove my WiFi drivers and reinstall them so I downloaded a file for the Intel drivers from Acer's website. I went into Control Panel and removed 2 devices that were related to WiFi. I then did a scan for hardware and found one wifi device, an Intel WiFI Link 5100AGN. I installed the driver for this one. The problem is I know I removed two and this is the only one the scan found and I can't remember the name of the other wifi device/driver I removed.Unfortunately ever since I did this my WiFi isn't working. In the control panel it shows all drivers are installed and working but when I click on the bars at the bottom of my screen no wifi networks show. I have tried going into the Network and Sharing Center and for example I select set up a connection or network and when I select Manually Connect to a wireless network it states "An Unexpected Error Occured" so I know something is missing that's allowing the WiFI to work.
I have a Inspiron 1520 which came with windows Vista and I recently did a Windows 7 clean installation. There were no drivers specified for Windows 7 in Dell Driver Download so I installed Vista drivers, connected to internet via LAN Cable and upgraded most of the drivers.
WiFI networks could be detected when installed for the first time but after a shutdown it never detects again. Sometimes it randomly detects, I tried using the laptop for 2 weeks now and only 2 times the WiFI automatically came up.
There is a switch to pull after turning on WiFI radio, which will display the list of WiFi networks in a window, that Switch is not responding now.