Wireless :: Two Modems And One Router?
Feb 24, 2011
I recently moved into a new place and suscribed to and ISP which they gave me a modem. I have been planning on buying a a cable spliter and router but in the meantime, I have been switching the cable from the cable box to the modem when I need internet. Well, a friend moved in and he brought HIS modem from same ISP and a wireless router and set it up upstairs. Now there is a modem upstairs and a modem downstairs and a wireless router upstairs. My kids are complaining that they cant connect wirelessly when the internet is being used upstairs. My goal is to be able to have two xbox 360's online- one upstairs and one downstairs, one netbook and two Jurrasic PC's which probalby are not wireless, My roomate prefers to hardwire his xbox to a router as he says its faster that way. Is the problem my kids are having downstairs just that the wireless router is too weak? Is it ok to have to modems connected (the one upstairs to the xbox? and the one downstairs?)
View 9 Replies
ADVERTISEMENT
Mar 29, 2011
I am looking for a wireless router with USB connectivity.. is there any router in the market with this kind of capabilities.. (USB 3.0)
View 4 Replies
View Related
Dec 17, 2012
Region : Brazil
Model : TL-MR3020
Hardware Version : V1
Firmware Version : V1.00 120817
ISP : CLARO (Brazil)
I have three 3G Routers TP-Link TL-MR3020 120 817 V1.00, a modem 3G Huawei E303C and another 3G modem ZTE MF-190 with ship operator CLARO (BRAZIL). I can not get 3G Router 3G modems work with these, although it is loaded with the latest firmware.
View 2 Replies
View Related
Nov 10, 2012
I have idea netsetter(huawei dongle e1732) and i had unlocked it and now i am using tata docomo sim card on it.now i want to use this dongle in wifi router 3g usb modems.but i am not sure that the dongle can work on router modems or not?i wanna make hotspot at home using dongle in router modem.
View 1 Replies
View Related
Feb 9, 2013
Region : Australia
Model : TL-MR3420
Hardware Version : V2
ISP : Optus, Telstra
Whilst the MR3420 V2 is sold as a 4G usb router, it appears that it does not support many usb 4G devices.In Australia we currently have the Seirra 320u, ZTE MF821 (100Mbps Cat 3) and Huawei E3276 (150Mbps Cat 4)whilst the V2 supports the first two (not the E3276), it has one major failure!It does not work at full 4G speeds.
The V2 does not appear to allow download speeds in excess of 25Mbps or uploads much greater than 2Mbps. This occurs on fast 3G and 4G networks.The throttled speed is apparently due to slow modem protocols deployed in the router. High protocol overheads mean it cannot 'shuffle data' very fast.We have developed working solutions using the Openwork platform that overcome these issues and provides speeds in excess of 70mbps.
View 10 Replies
View Related
May 4, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.15.2 Build 130326 Rel.56282n
ISP : BSNL EVDO
I have tested two zte ac 8700 bsnl evdo modems with tp link mr3220.its not working with the tp link mr 3220.it is lited as the compatible modem in the website. I have updated the firmware.
View 3 Replies
View Related
Nov 9, 2009
I'm on a Mac running OSX. Qwest (my ISP) recently swapped my DSL modem for an Actiontec Q1000 combo modem/router. The Q1000 firewall is not nearly as configurable as my Linksys BEFSR41 (v3) router. I'd like to use the Q1000 just as a modem and use my Linksys as my router so I can access it's superior firewall configuration.
How do I physically hook the hardware up?
How do I configure the 2 items. The Q1000 uses 192.168.0.1 as it's web address. The Linksys uses 192.168.1.1. I have 2 Macs on my network, an iMac (OS 10.5.8) and a G4 (10.3.9).
Besides web browsing & email, I also have a torrent client I use (Azureus).
View 8 Replies
View Related
Nov 6, 2012
I have my broadband line feeding into a WAG 320N in an outside room. There are computers in the outside room which are wired to the modem via CAT leads & plugs. Wireless is turned on, but is not currently being used in this room, as the wired connections work fine. From this outside room there is an underground cable (12 metres) to the house, which through a CAT lead is plugged into another WAG 320N, which operates primarily wirelessly, so laptop computers can be used in the house wirelessly. When the outside room modem is turned on AND the house modem is turned on, only one modem OR the other can access the internet, NOT BOTH. Why can't both modems operate wired and wirelessly. What is the problem? Is there a conflict between the two wireless signals? Can/ should I turn off the wireless signal from the outside modem (if so HOW?) . OR is there a way I can have both modems transmitting a wireless signal.
View 1 Replies
View Related
Jan 27, 2013
I have two modem USB (two ISP) and successfully created two Internet connections. However, it's useless since Windows will only use one of those connections as its default gateway. The other is essentially ignored,I have software Multi-WAN for split IP, first modem connection can't use but it ok for last modem connection to internet.
View 3 Replies
View Related
Sep 13, 2011
omputer A connects to modum A thru phone line that needs to stay active for a system to operate. Computer B connects to modem B always using the same phone line a few times a month, what device will alow each computer to know and go to its modem, dialing in on one phone line for two modems, and resting in primary state for system A to operate as a Dialer.
View 5 Replies
View Related
Aug 21, 2011
I have ATT 2wire DSL but the range sucks, can I hook up a second one on the same phone line at the other end of my house?
View 3 Replies
View Related
Apr 11, 2012
i need to use two modems connected to different virtual networks at the same time on one pc.the pc is having two lan cards. i tried using different ip address for both the modems.they are pinging but web pages are not opening.i tried using different browsers for opening web pages of the virtual networks but they are not opening.
View 1 Replies
View Related
Feb 19, 2011
I currently have a Motorola modem, which is unreliable so I want to upgrade. What's the difference between modems and routers an what should I get? I don't need any ultra high-end thing just a reliable modem/router for surfing the Internet and some light gaming (mainly COD4).
View 8 Replies
View Related
Feb 28, 2012
Best modems for PS3?
View 1 Replies
View Related
Apr 11, 2011
In a house that is too large for a small wireless modem to send a signal far enough, is it possible to use a second modem in the same phone line (not at the same time). Filters are used in the spare phone jacks.My main question is: when modem A is being used and modem B is switched off, is it necessary for the splitter for modem B to be removed and the filter put in its place? Or is the fact that modem B is switched off sufficient? I suspect that it's necessary and that's why my friend gets very slow download speeds even when the other modem is off.She insists that it used to work but I think she was just lucky if it used to work.
View 2 Replies
View Related
Oct 24, 2012
DSL user. Can two different modems (one wireless and one regular) be used at two different locations in the same house using one phone line..?
View 1 Replies
View Related
Feb 19, 2012
I have two usb modem A and modem B. modem A could download at max of 300kbps while B could download at max of 700kbps. Since I am a frequent internet user, Im planning to use this two modem simultaneously so that I could have a max speed of 500+300=800+kbps. But I dont know if this would work. The problem with usb modem is that, when you connect the modem A in the internet while modem B is currently running, Modem B is being disregarded right? I was thinking of, say while im browsing and downloading, modem A would be use for browsing and modem B is for downloading. Or them may either share each connection for better performance.
View 1 Replies
View Related
Jul 2, 2012
At home we have a BT broadband connection. My girl friends work pays for it as she needs to get on to the office servers, this is secure thought a modem box and also a firewall box. This is restricted our personal internet access to only certain sites on her work laptop. I myself work for myself and need to access the internet via my laptop (mac), I'm a web designer so rely on the internet.If I was to buy an addition wireless modem could I unplug the work configured set-up at the wall, plug in the new one and set it up? I don't need to run the two modems at the same time, so could just swap the plugs as and when required.
View 2 Replies
View Related
Dec 28, 2012
I Just switched from DSL to Charter Communications Cable internet. For some reason my computer wont see the internet. I plug the same cord into my brothers computer and the internet works just fine. I plug the same cord back into the DSL and i have internet. I have done troubleshooting and it finds this problem (Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding. I switched to a different cable modem same exact situation. Works on my brothers but not mine. My computer is a much newer and more capable computer then his. When we activated the internet we did it on his computer, but before we switched to charter i plugged the modem in without internet and it seemed to have the same problem. I just got more results on his as it immediately directed my to the charter page at that time. On mine i got nothing. ( Also i believe my brother said that it did work on my computer for a few minutes at first but i'm not 100% on that.)
View 1 Replies
View Related
Feb 1, 2011
How to track all the MAC address of all the modems connected to a network .
View 2 Replies
View Related
Aug 4, 2012
I have a problem with a new Actiontec modem from Verizon FIOS The past few years I've had two cable modems working fine for verizon fios. Both were the NIM-100 from Motorola.The second "slave" cable modem is connected via coax cable.I recently replaced the primary NIM-100 and the associated wireless router with the new Actiontec modem MI424-WR IN viewing the network connection via the Actiontect control panel, it shows the other slave modem connected via coax but claims that the status is "Cable Disconected"
View 3 Replies
View Related
Jan 7, 2011
I have Comcast broadband with one modem connected to my PC. I just bought a Denon AVR-991 Receiver that has internet capability. I I plan to use it for internet radio, etc.The problem is that each piece of equipment is in different areas of the house. I could connect the cable modem to the receiver and connect the PC to the internet via a wireless router, but I don't want to lose the speed of a direct connection on the PC.. can I have two different modems connected to the same incoming cable line? FYI, the existing modem is a Linksys BEFCMU10, and the second modem is one Comcast is in the process of sending to me as I just added Voip phone service to my account.
View 2 Replies
View Related
Aug 9, 2011
What is the current list of supported USB modems for the SRP547W router?
View 1 Replies
View Related
Feb 9, 2013
I've tried to download the .docx document to both Win and Mac computers. On both platforms MS Word complains that the document is corrupt.
View 5 Replies
View Related
Feb 6, 2011
I have two buildings. In first building I have network with internet. In other building network without internet. I need to connect buildings to the same network using two WAG320N modems by the phone line cable. Is it possible and what configuration I need to set up?
View 2 Replies
View Related
Feb 7, 2011
The internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
View 3 Replies
View Related
May 1, 2013
I recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results. Other than a factory reset, get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago?
View 2 Replies
View Related
Jul 18, 2011
Have a 400N wireless router that has been working fine with several wireless devices on a small home network for about a year. Nothing has been changed but suddenly all of the wireless wireless devices dropped offline and none see the network signal in their search to reconnect. All of the indicator lights on the router look good and I have unplugged power and reconnected first the cable modem and then the router but still no signal. Logging into the router seems to show that it is working OK but there is apparently no air signal for the client devices to detect so only the wired devices are showing up. It's as if everything is working except the antenna function. Are there any suggestions short of uninstalling and reinstalling the whole set up and see what happens? I have taken my laptop to a nearby hotspot and confirmed that it is receiving other network signals fine so it has to be something to do with the router itself.
View 1 Replies
View Related
Jan 3, 2013
I have a WRT54G V8 and everyone says the username to sign is is blank and the password is admin. I have tried this and it does not work. I have also reset the router several times and this also does not work.
View 2 Replies
View Related
Dec 26, 2012
I have a wrt160n as my main router cascading to an e1200 at the other end of my house. The idea was to enhance the wireless signal there. Went thru extended discussion with Cisco support settnig the system up.
Ip address of e1200 is set more than 5 apart from primary router, dhcp is disabled. The connection bewtween routers is Wan to Wan.
I have wired signal at the e1200 but no wireless signal?
View 2 Replies
View Related
Nov 3, 2011
The problem is that I have Vonage phone service which requires internet service. I have spoken with serveral Linksys agents, none seem to understand the problems or know how to get me connected. In sum, with the Linksys modem, the Comcast modem and the Vontage modem, how to get the router to work without messing up my phone service.
View 9 Replies
View Related
Oct 29, 2012
I have a Netgear WNR3500L wireless router. I assume it's v1 because on the back it doesn't have "v" anything. Firmware version V1.2.2.44_35.0.53NA.When I connect using g I get 22+Mbps download speed. When I connect using n I get 10 Mbps. I've tried using both WPA2 only (laptop reports 130 Mbps connection I believe) as well as the combo WPA+WPA2 (laptop reports connection of 117 Mbps).Broadband download results don't change - they stay at the 10 Mbps level. I've fiddled with some of the settings on my laptop's wireless card - but the results are the same.For now I'm just trying to figure out where I should focus my investigation and fiddling efforts - on the laptop or on the router.
View 5 Replies
View Related
Jan 6, 2013
i have a Netgear N600 Wireless ADSL2+ router on wireless a/b/g/n dual band and all that but what i want to know is will i get better performance if i use a WirelessN card over G on a 10 - 15mb/s connection gaming wise and will it b a great increase over the G causeif its not a HUGE increase then i wont waste my money on a newer card?
View 3 Replies
View Related
