Wireless :: Does The Wrt54g Have Wps
May 10, 2011I am using my hp 3050 j610a printer with ethernet, but I want to set it up wifi. I have the linkseys wrt54g router.
View 1 RepliesI am using my hp 3050 j610a printer with ethernet, but I want to set it up wifi. I have the linkseys wrt54g router.
View 1 RepliesIn the house I am using a WRT54G as the main router connected to the ISP. I have run a Cat5E wire from the house to the shop 110 feet away and connected a WRT54GS to the Cat5E (a LAN Port). I turned off DHCP and assigned it a static IP from the House WRT54G. Local wired connections work great, problem is it will not offer up a wireless IP address to wireless clients.I wired up a cross over cable and actually plugged it into the WAN port, it actually picked up and offered wirelessly the House IP address range, however, could not get to the internet. Why I can't wire to WRT54G and a GS together and expect a wireless connection at the shop site?
View 2 Replies View Relatedi have just found my old linksys wrt54gs router and wna t to know if it is possible to have it as a secondry access point
View 1 Replies View Relatedmy linksys router dosnt have a password and a disc either can i fix that
View 1 Replies View RelatedI'm looking to upgrade my WRT54G as I have had NO luck in getting my Galaxy Tab to connect through it so far (can connect and get an IP address but can't get out to the web) and have had intermittent problems with my Blu-ray lately. I am looking for something with the best affordable range, live 3 floors down from the current one and get about 3/4 signal strength so there's not much interference it seems. I watch a lot of online content through Hulu, Netflix, and LMB games and share with 2 other people.I am looking at the E series, probably the E1200, 1500 or 1550 as they seem to meet my needs. Any users have any advice about the ease of install and use of either of these? Or would it be better to get a gateway as we are considering going from DSL to U-verse service, twice the speed for $2/month more
View 6 Replies View RelatedActually i´m working in a departamet of networking in my business with only cisco devices. I used to work with the wap200 wireless-G Acceess point (Small bussiness), but now i have a problem with it. I´m trying set the wap 200 as a wireless repeater for WRT54G but it´s a impossible.
View 1 Replies View RelatedI'm currently contemplating on purchasing a 2nd WRT54G router with dd-wrt as a 2nd wireless repeater in the house. Just wondering if this would be possible. Current setup is Main router (D-Link DIR-615) on 3rd floor > WRT54G as wireless repeater on 2nd floor. I don't mind the loss of connection speed since the main purpose is to increase coverage to the 1st floor.
View 4 Replies View RelatedI've been using my WRT54G for at least 4 years if I'm not mistaken. I've never had any issues with it at home. I use it to connect my i Pad, iPhone, Mac Book, and XBOX 360 (wired). My question is should I just leave it as is or will I see any performance gain on upgrading my wireless home router? I eventually would like to get 6-10 IP wired cameras for home CCTV system.
View 5 Replies View Relatedwrt54g v1.1 After setting up the wireless router, I can use the internet on the pc as well as a wireless device. However after putting my pc in standby mode then back on, I can no longer connect to either. I have to restore factory defaults each time and re-enter all passwords and settings.
View 9 Replies View RelatedI have a WRT54G router V6, and I am wondering how many wireless connections it supports? Because, I have one wired connection and whenever I try to connect more than 4 wireless devices a device will get booted.
View 9 Replies View RelatedI've been having a ton of problems with fixing my connection with my wireless network. A few months ago, I lost connection on my desktop computer and I reconnected... however, it didn't actually connect. When I hovered my cursor over the Wireless Network Connection icon, it just said "Acquiring Network Address" and never connected. I got onto my laptop and did a quick search on the problem. A few wrong moves later, and I couldn't even find my wireless network.
Despite all of my attempts at creating a connection, I still have no internet. I've even tried plugging my computer into my WRT54G router via cable, and still no connection. It's not the router that's the problem, though, as my two other computers and xbox have perfect internet connection.
I use Windows XP, I use a WRT54G router, I have Mediacom high speed internet, and that's about all I know.
Last night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 3 Replies View RelatedI assign private IP for each PC within LAN. And DHCP is in charge of wireless connection since 192.168.0.100 for 10 clients. ,Web setup access is also disable for wireless connection.When a notebook connect to WRT54G via wireless. Private IP is always out of range and it could accesses web setup.What happen to my WRT54G ?
View 3 Replies View Relatedi got this wireless router (linksys version WRT54G) from my aunt but she can't find the disc for it. is there a way to use it without buying anything (this is mainly for my wii), if so how?
View 2 Replies View RelatedThe WRT54G is located upstairs in the game room. The entire house is also wired with Ethernet. I mean every single room except the nook. Well guess where my wife has her laptop set up, yup the nook. She wants wireless. And she insists on staying in the nook.
If I take the laptop in the living room (downstairs and closer to the router) It gets 12Mbs. If I take it upstairs near the router it gets 18Mbs. But in the nook (downstairs) it gets 2Mbs. My wired desktop is currently pulling 19Mbs. I have half a dozen WRT54G's stored in a closet. Should I setup a wrt54g as an AP or should I buy a WAP54G (ebay $20)? I have an Ethernet port in the living room, which is directly across from the nook. I tihnk If I had an AP there then problem would be solved.
Does the signal supposed to degrade that much when passing thru walls?
I have an old wireless router lying behind me and I want to use that old router as a switch. That old router is a knock-off,no-name router brand called "Gigafast" and the model number is WF19-CAPR. There are also variants to that router name as well.The router that I currently have is a Linksys WRT54G wireless-G router. I'm planning to upgrade the wireless router in favor of Wireless-N in the near future.I want to know how can I use that particular Gigafast router as a switch and I want to link that router up to my WRT54G router. The scenario goes as follows:
Cable internet connection ----> WRT54G router ---> Gigafast router (as a switch)
The IP address for the WRT54G router is 192.168.1.1, while the Gigafast router is 192.168.1.254. I may know by now that I have to disable DHCP on the gigafast router and I have to change an IP address to something that is "not in range" with the WRT54G router, am I right?I want to expand the number of ports, so I can connect with future devices such as a VoIP ATA adapter, a laptop and possibly an entertainment box (i.e. Apple TV or Boxee box)
I have lost the start-up cd for my router, where to find a downloadable one so i can hook up my router.
View 1 Replies View RelatedI have 2 Linksys WRT54G laying around. Is it possible to connect from Cable Modem – D-Link wireless N router – 4 port switch – Linksys Wireless G router?The reason is that my office is in the back of the house and I have a network cable running from outside to the front of the house. The wireless N doesn’t give signal to the front of the house. I want to have wireless for the tablets and the android phones.
View 1 Replies View RelatedI have a Linksys WRT54G 2.4ghz at one point and need the signal to go 300 feet to another location. Running an RJ45 cable that distance want work and no way to run any kind of land lines. Everything will have to be done wirelessly.
What equipment do I need to get the signal to reach out to 300 feet?
have one router WRT54G with firmware version v2.02.7, Feb. 27, 2004, and I'm trying to use this router to get my PS3 connected to the internet, but in the PS3 appears that I'm using NAT Type 3 and to enable some online features in my PS3 I must change it to NAT Type 2 (from the router configuration), I tried everything that I found (put my PS3 in DMZ zone, enabling TCP/UDP ports, enabling/disabling UPnP, disabling Media Server Connections in my PS3, etc.) and nothing works,
View 3 Replies View RelatedOur office has 2 connections to the internet. Each connection comes into our building through a Linksys WRT54G router. I like to connect the routers together through their ethernet ports so that we can share resources such as printers and etc. Should I config each router such that they are actually on the same network? For example:Router 1:Router IP 192.168.1.1DHCP serves 192.168.1.100-150Router 2:Router IP 192.168.1.2DHCP serves 192.168.151-200
View 2 Replies View RelatedI can not find the CD for my WRT54g router. Is there any place to download the setup info?
View 9 Replies View RelatedI have a WRT54G wireless router that I haven't used in years because my old cable provider supplied me with a router. I recently switched cable providers & they don't provide a wireless routers. I would like to use my WRT54G router, but I don't have the cd. I figured it wasn't a problem because I can just do a manual setup using the ip address 192.168.1.1. I receive the pop up window to enter the user name & password. I follow the instructions & just type in the password field the word admin & l left the user name blank but it doesn't work.
View 4 Replies View RelatedI have a few devices at my home that connect wirelessly to the internet via wrt54g. I want to connect to the internet via VPN. I would like to find out if it is possible to connect WRT54G router to the VPN via PPTP or L2TP? The VPN company provided me with PPTP and L2TP credentials. I can access vpn via OpenVPN on computers but I would like my TV connect to the internet also via VPN.
View 5 Replies View RelatedMy 'network' looks like this:
CABLE MODEM ===> WRT54G
WRT54G Port1 ===> PC
PC is running Windows/XP sp3 with all updates installed. It has no wireless adapter.WRT54G model number sticker shows ver.2. I don't think the firmware has ever been upgraded.This used to work. What has changed? The laptop that used to connect wireless is dead. I now have a 2nd PC that sits on the same table as the old PC. It has no wireless adapter at this point, but eventually either it, or the old computer, will be getting its internet connection wireless-ly, as the computers will be physically in separate rooms. I can't see how these changes would affect the operation of the router.
I have a WRT54G router that's worked for a very long time. I had WEP security set up and it worked fine until recently. About a week ago my three year old son managed to reset the router (I'm still not sure how). When I go onto the web-based setup page I am unable to change the wireless security setting. I select an option from the drop down menu but then the page reloads and nothing has changed.
View 1 Replies View RelatedWRT54G v6 router suddenly cuts out several times each day, using it with wired connection on two computers. No problem when direct wired to the modem. Is this router failing? How to fix it?
View 4 Replies View RelatedA few days ago I lost connection to the internet. The Status on the 54g does not show an IP address from the WAN(cable modem)If I connect the cable modem directly to the computer(wired) I can get online no problems. I can also access the 54g through 192.168.1.1. (wired)But if I connect the Cable modem to the 54g....no Internet This was my bootup.
1. Unplugged both cable and router.
2. Plug in cable wait for solid lights
3. plug in router wait for lights
4. plug in computer...connection established to router.... No Internet
I have a Model #WRT54G-V8 Linksys Router. I never set a password to keep my neighbors from accessing my router. I no longer have an Manual either. set a password or a manual to do that ?
View 1 Replies View Relatedhow i should set up my new valet m-10.Im currently using a WRT54G as my main router connected to my modem in my home office, and a WAP54 set up as a repeater in the living Room. We have multiple devices still using Wireless G, and a few that have Wireless N so im wanting to use the valet just for my N devices and My WRT54 & WAP54 for the G. So do I just cascade the valet off the WRT54? or should I make the Valet the main Router and cascade the G routers? the reason I have the repeater is because the wireless signal is weak in the living room and bedrooms.
View 1 Replies View RelatedI recently set up a wrt54g router that I got used from a friend. I pressed the 'reset' button on the back, configured it for my computer according to the instructions on the website, and everything worked fine for a couple of days. Then I lost connectivity, tried powercycling my modem, but had to reset and reconfigure the router again. Worked fine again for a couple of days, then the problem repeated itself, so I reset and reconfigured again.
View 1 Replies View RelatedSetting up a passcode for my router. I have searched online but so far have not been able to find anything.
View 1 Replies View RelatedI'm trying to set up my sons I pod touch to my router i have the wrt54g v6 and it won't connect?
View 7 Replies View Related