From my Dell Vostro laptop I can connect to the internet but cannot print wirelessly on any of my three printers. The Mac computer in the house works on one printer.Not really sure where to start working on this problem.
View 1 Replies
My printer is hard wired to my wireless router, allowing me to print wirelessly from my laptop. After successfully printing this way, it is no longer working. I have tried re-installing the software, however, it is unable to "find" the printer. I have tried this from 2 laptops with no success. My wireless router appears to be working as far as internet.
View 1 Replies View RelatedA friend has asked me to work with him set up a new office. He already has a PC and a phone line but not broadband, so he is going to organise that and getting a wireless router.He wants a wireless colour laser printer so that his visitors/guests can print easily from his office, or the next office. Does he really need a wireless printer to do this? Or if I plug a network printer directly into his router with an Ethernet cable, same with his PC, will that enable laptop users to print wirelessly (assuming they know the router passphrase of course)? I guess they would need to install the relevant printer driver to do this too.
View 2 Replies View RelatedShared printer not printing. Have two PCs, one with Vista OS with the printer connected and the other XP, both connected via network sharing. I cannot print from the XP PC. It says I do not have permission even though I have shared the printer.
View 4 Replies View Relatedwireless hp photosmart printer stopped printing for no apparent reason.
View 1 Replies View Relatedwhat do i need to do to be able to print from my macbook air to my epson r280. i have a wireless network set up. computer attached to the printer is a dell running windows xp home edition
View 2 Replies View RelatedI have a Samsung CLP-325W wireless printer, and I don't have the MAC address bounded to a static IP address. The printer is turned on and its wireless light is blue. However, from the view of my router, it doesn't seem to be on the network.
The printer is binded to the SSID and has worked before, but when it gets turned off it seems to forget about the network.Is there anyway that I can force the printer to print out it's current state? [IP address etc]
I currently have a home wireless network set using a router provided by the phOne company. I am considering canceling my wireless Internet through the phone company and use a cell phone data plan for all my wireless by using cell phone as a personal hotspot. Is there a method to use my wireless printer (hp 4360) to print through the personal hotspot?
View 1 Replies View RelatedNow that the firmware update allows us to plug a printer into the E4200, is there anyway to simultaneously enjoy network storage AND a USB printer?
View 1 Replies View RelatedWork has an E3000 set up in the office. Is it possible to connect remotely (outside of office) through the internet and print to a printer that is wired into the E3000?
View 3 Replies View RelatedI working with guest accounts on a WLC 5508.if there is possibilty to print out the account information directly from the controller. If possible how to print out this accounts ?
View 3 Replies View RelatedI have a wireless printer on an internal wireless network. I have a laptop connected wirelessly on the same internal network. When both devices are connected to the same network I cannot connect to the printer. If I change my laptop over to the guest wireless or to a wired lan, I can see the printer. I vendor stated that within the 4402 wireless controller there is a setting to allow wifi to wifi connections on the same internal network. I am trying to figure out what that setting is called and where I might look for the setting within the wireless controller.
View 1 Replies View RelatedATT Uverse modem provides internet for the house. Uverse modem also includes a wifi router. The HP C410a printer is connected wirelessly to the Uverse router. The printer is able to access the internet, and all computers (including the problem Mac) can print wirelessly when wirelessly connected to the Uverse router. The Mac sits at the opposite end of the house, far outside the range of the Uverse router. To solve this, we have a Netgear Powerline adapter connected to the Uverse router to provide internet over powerlines throughout the house. At the opposite end of the house, the Linksys E1000 is connected by ethernet to the Netgear Powerline outlet. This setup works - all computers, including the Mac, can wirelessly connect to the E1000 and there is fast internet access.
Two different PC's can print wirelessly to the HP C410a while connected to the E1000 - it works perfectly. However, the Mac can't print via the E1000 - I have to carry the Mac over to be in range of the Uverse router and then print. When you try to print on the Mac, it can't "find" the printer. However, if I open the HP print utility on the Mac and manually enter the IP address of the printer, a new printer pops up and I can make it print test pages. But I still can't print anything else from the Mac.
The Mac can print if the E1000 is bypassed with a physical ethernet connection to the Powerline outlet. So the conflict is definitely between the E1000 and the Mac, because everything else works in every other combination.I think something in the E1000 is preventing the print driver on the Mac from sending data to the printer, because the Mac can "communicate" with the printer via the HP print utility software, but whenever you try to print using the driver it can't connect to the printer. I disabled the E1000 firewall
I have followed the details here as closely as I can:URL
I've upgraded to 7.4. I've enabled IGMP snooping, increased the time out, decreased the query/hello interval, went into Controller> menu and set AP Multicast Mode to Multicast with the Bonjour multicast range of 224.0.0.251.
Went into my WLAN and enabled Multicast VLAN Feature, and enabled my Multicast Interface as the same VLAN as the WLAN range.
The Lantronix Bonjour device is on the same VLAN as the WLAN (13). Accessing the Lantronix device shows it polling printers on our wired VLAN. However, no iDevice that joins the WLAN/SSID can find these printers.
I have 2 separate broadband providers at home - one for work, one for family use. Both are ADSL lines, one with a Netgear DG834G modem router, the other with a Thomson TG585. My work PC is Windows 7, and the family have 2 Windows XP machines and a MacBook. I also have 2 printers (Xerox ColorQube 8570 for work, and Canon MP610 for family).If possible I'd like to be able to print to either printer from either network and any computer! Am I asking the impossible or can the two networks somehow be linked?
View 1 Replies View RelatedDoes my Belkin F5D8236-4 ver. 1 (firmware 1.00.02) router support Apple's Bonjour print application. I can't get my iPhone or iPad to recognize my new HP Photosmart 7520 wireless printer which is connected to my network through my router.
View 4 Replies View RelatedRegion : United Kingdom
Model : TL-WR702N
Hardware Version : V4.20.0
Firmware Version :
ISP :
Using a TL-WR702N router as a wireless access point on a narrow-boat. How to print from my i Pad and iPhone to a printer on my narrow-boat, on the UK inland waterways. The Apple store geniuses seem to contradict each other on how it can be done, if at all. I have an i Pad and iPhone and would like to print photos, documents and the occasional web page to my Canon MG4250 printer, which has Air print capability, while I am cruising. I don't have a PC on the boat and of course there is no telephone or broadband connection (other than via 3G on my iPhone). In other words, I want to link my printer to a router, then when required, wireless connect to the router to print from my Apple devices.
Will the TP Link TL-WR702N 150Mbps Wireless N Nano Router allow me to do this? Reading the product information, this nano router looks very flexible, but all five modes mentioned seem to utilize an internet connection. I only have an internet connection via 3G on my iPhone, and can also tether the i Pad to the iPhone's WiFi hotspot to give internet connection on the i Pad. Would I have to use this internet connection somehow, or can I just connect the Apple devices to the printer via the WiFi on the nano router?
In effect I want to create a wireless access point for printing, without any, or at least a regular, internet connection.
My customer has multiple sites, each with a 2504 WLC.A data center with a 5508 in the DMZ acting as Anchor for the remote sites.ACS 5.x and NCS Prime.All guest users will egress to the internet via a Vlan in the DMZ.Authentication is currently web-auth on the Anchor, but will move to NCS once that is fully deployed.
Is it possible to put a printer in each site for Guest WLAN users to use?
The scenario I am facing is, trying to have the ability to print from my laptop computer remotely to my home printer which supports IPP.What I did so far was to make sure that I enabled IPP in the printer. So the URL is 192.168.1.101:631. (I am able to connect and print to the printer on local network usinghttp://192.168.1.101:631.) I then went into my router and enabled port forwarding for that address and made sure to specify port 631. It doesn't work. I took the following steps: (It works neither with XP or 7)Windows 7 Steps:1. Start-Devices and Printer2. Add a printer3. Add a network, wireless or Bluetooth printer4. Clicked "The printer that I want isn't listed5. Choose "Select a shared printer by name" Below is the scheme I followedWhat is the proper way of setting this to function properly so that I can print to my computer remotely. I want to be able to print to the printer directly and not through a server or another computer. Is this even possible?
View 2 Replies View RelatedI need to be VPN'd in to work all day but during the day I need to print to my home network printer. The work around has always been to press print then disconnect from VPN, wait for the document to finish then reconnect VPN. This is starting to get on my nerves and I was hoping that there was a way to be on VPN through my physical LAN and maybe print over my wireless network. Is there a way to separate traffic in Windows 7?
View 2 Replies View Relatedi want give the dos printing from remote desktop to local computer on anotherlocation
View 2 Replies View RelatedI'm having trouble printing from anything other than "windows desktop 1" (exclude "xbox 360 & Apple TV) So I need to know how to setup printing on the "macbook pro", "Windows laptop" & "windows desktop 2" These computer (except the macbook) all were connected once and I did have home group successfully connected to share the printer between them all as long as "windows desktop 1" was on. But now there in the setup in the pic and the home group and printers don't communicate with each other anymore.
View 3 Replies View RelatedA weird issue that came up a couple weeks ago, about 15 users that print to network printer via IP. The printer is attached to a print controller with all print jobs are spooled to.
So when a user prints, lets say three pages, it spools to the windows queue and each page takes about 1.5min to get to the print controller queue, when it would only take a few seconds to spool.
Different switches, print drivers..etc have been tried and narrow it down to one thing. When working with the NAS server plugged into the switch, that's when it takes long but when unplug from the NAS, prints come out fast like normal.
how to find out if the NAS is broadcasting some crazy traffic? but it seems that it's only affecting this printer, other printers that don't have a controller print out fine and fast.
I have walked into a company that has several small (1-4 PC's each) remote locations, and they all connect to Terminal Server to use our POS app. This app will not keep redirected printers saved between each session, so in order to save the printers, they have software VPN's set up on each client, then the local printers are installed on the server through a Local Port using the VPN ipaddressprinter share name. This allows the printers to be saved in the program and not re-assigned each session. Now, let's say that I have implemented a new desktop replacement procedure, and we are now in phase one of said procedure. I have purchased Windows 7 64-bit desktops. After setting up my deployment standards and testing in-house, I placed one of these PC's in the field. This is where I learned the issues of printing from a 32-bit server to a 64-bit client. I have not been able to successfully print to the printer installed on the server using the Local Port of the client, print job errors out. I have done some research, and found the issues with printing from 32-bit to 64-bit, and have installed all the additional drivers I can find, with no success.
View 1 Replies View RelatedI am trying to protect the computing assets on a perimeter firewalled / protected LAN from visiting laptops while still permitting the laptops wifi internet access and printing priviledges on the LAN's networked HP printer To do that I was thinking of setting up a computer as a dedicated firewall with 3 NICs (external internet, internal LAN and a DMZ for a Guest wifi router for use by the visiting laptops). (Will probably use free Untangle Firewall software software or such on the dedicated firewall computer).What I can't figure out is the firewall's topology, IP ranges and rules / forwarding that would permit such laptop operation.I would think it would be a common need for small offices but can't find much material on the subject.I do understand that such would slightly weaken the firewall but feel that I would gain more security overall.
View 2 Replies View RelatedI've tried scanning for viruses, using winsock fix (they had a static ip I also set to automatic since they should not need it). I just turned off the firewall as well, tried "selective startup" and unchecked "load startup items" and nothing has worked so far. We're working on giving them another computer but I'd like to know why this happens.
View 7 Replies View RelatedI've been having an issue with all the printers and print servers on my network. They work great with my wife's computer which runs XP, but my computer which runs 7 won't print. Tried a Cat 6 cable on one and got some results.
View 1 Replies View RelatedHow do I get note pad started on my computer. When I want to print something the computer tells me I need to use notepad first.
View 1 Replies View RelatedIm having some printing issues whenever im working on the terminal server. If I try to print a document out in "landscape", it will print out "portrait", seen though it displays properly in landscape in the print preview. If Im working locally on my PC, it prints out fine.
View 2 Replies View RelatedI am using Open-VPN to connect directly to our server at our office. We have a main network printer at the office that everyone uses. While hardwired, I added the printer to my laptop. When I am at the office, either wired or wirelessly, I can print to the printer. When I try to print from home, the printer never opens, it is unable to connect. Is there a way to access a network printer when logging in remotely through VPN?
View 9 Replies View RelatedI've been having an issue with all the printers and print servers on my network. They work great with my wife's computer which runs XP, but my computer which runs 7 won't print. Tried a Cat 6 cable on one and got some results.
View 2 Replies View RelatedI have a Cisco ASA 5505 and i need to allow printing from an outside network.
View 2 Replies View RelatedI have the printer hooked up to the USB port on the router (Asus RT-N56U), and in the router GUI, it recognizes the printer but when I set the printer up on my computers, they seem to not want to connect, or if they do it won't print anything for a few minutes after clicking "print." Is this just one printer that's going to have issues printing through the router?
I've tried both USB ports, and a couple different cables.USB flash memory works just fine and is quick, like it's plugged straight into a computer.Ironically, I bought this router to replace my file/print server.
