Sharing :: Printing From Terminal Server

May 11, 2011

Im having some printing issues whenever im working on the terminal server. If I try to print a document out in "landscape", it will print out "portrait", seen though it displays properly in landscape in the print preview. If Im working locally on my PC, it prints out fine.

View 2 Replies


ADVERTISEMENT

Cannot See The Sharing Printer Through TS (Terminal Server)

Jan 28, 2011

PC-1 connect to printer as local printer but shared for other PC.

PC-2 through TS can see the shared printer. This is OK. But when the printer move and connect to PC-3.

PC-3 connect to the server through TS and want to have print out some document from the server to the printer. But unfortunately the Printer cannot be seen through TS. Even the printer already shared.

View 3 Replies View Related

Terminal Services On Server 2008

May 26, 2011

I have rolled out Terminal Services on Server 2008 R2 for a company I used to work for, it worked perfect the users could go home and browse to our web domain and login and use apps straight from the server.there'd be no Microsoft stuff to be accessed just pure Linux Servers but probarbly if users access the online terminal services on Linux they'd be using a Windows PC

View 1 Replies View Related

Printing To Local Printers From TS App Via VPN - 32-bit Server?

Sep 5, 2012

I have walked into a company that has several small (1-4 PC's each) remote locations, and they all connect to Terminal Server to use our POS app. This app will not keep redirected printers saved between each session, so in order to save the printers, they have software VPN's set up on each client, then the local printers are installed on the server through a Local Port using the VPN ipaddressprinter share name. This allows the printers to be saved in the program and not re-assigned each session. Now, let's say that I have implemented a new desktop replacement procedure, and we are now in phase one of said procedure. I have purchased Windows 7 64-bit desktops. After setting up my deployment standards and testing in-house, I placed one of these PC's in the field. This is where I learned the issues of printing from a 32-bit server to a 64-bit client. I have not been able to successfully print to the printer installed on the server using the Local Port of the client, print job errors out. I have done some research, and found the issues with printing from 32-bit to 64-bit, and have installed all the additional drivers I can find, with no success.

View 1 Replies View Related

Cisco :: Terminal Server Disconnect From TS Session?

Jun 2, 2012

What command sequence disconnects you from a TS session? My setup is as followsr1 > TS > 2009-2621XM 2010-3825-R1 2011-3825-R2I can connect from the TS to any of the devices. The issue is that I am telnet'd to r1 and from there telnet'd to the TS. So when I type "Crtl+Shft+6, x" I go directly back to r1 and not the TS. Furthermore if I resume the session on r1 the TS is still connected to whatever session I was in prior to disconnecting. I've experimented with the disconnect and escape characters but I'm at a loss what it is that changes this.

View 4 Replies View Related

Cisco :: TIA-232 Terminal Server With Async Ports

Jul 24, 2012

We have the 16-port (NM-16A) and 32-port (NM-32A) asynchronous (async) network modules which  provides 16 or 32 EIA/TIA-232 (formerly know as RS-232) data terminal equipment (DTE) serial interfaces at speeds up to 134.4 kbps . Few of the interfaces are connected to the console of cisco switches and routers , now we need to know that the remaining  interfaces can be connected to console ports of devices other then cisco Systems to manage them , Will it work with them ?

View 0 Replies View Related

Cisco :: Configuration Of Terminal Server On 1921?

May 18, 2011

Since Cisco 2511 is out of sale now and Cisco 1900 series are recommended to replace for the purpose of terminal/comm server. How to configure terminal server on HWIC-8A module?

View 3 Replies View Related

Cisco WAN :: How To Configure 3825 As Terminal Server

Apr 19, 2012

I want to build up cisco 3800 series router as terminal server , i have Asycs 32A module in cisco 3825. Here is show version of device.Do i need to installed any specific IOS in Cisco 3825 device ? how to configure cisco 3825 as terminal server.

View 1 Replies View Related

Cisco VPN :: 5505 - RDP To Terminal Server Failure

May 2, 2012

I am running ASA 5505 release 8.2(4) using a clientless SSL vpn to connect  my assessors to the server via RDP to a Terminal server.  Everything was working fine until last week when we had a Internet outage. During the outage some of the assessors claimed to have accepted a Cisco add-on to get into the site.  once the internet came backup they could not connect to the terminal servers - what would happen is they would click on the link - say OK to connect the clipboard and the screen would pause for a few seconds then right back to the select options page.
 
they can get to other servers (non-terminal servers) but not to the ones they need.   I can recreate the issue by waiting a REALLY long time before replying to a prompt to install an cisco add-on.  I have users that can connect and others than can not.  Also this only seems to affect Internet Explorer 8 and 9  does not affect Firefox

View 1 Replies View Related

Cisco :: 2901 Terminal Server Configuration

May 12, 2012

I have just purchased 2901 with HWIC-16A and 2 CAB-HD8-ASYNC Terminal Server to manage 16 (connect via console) cisco deivces.
 
Plese find attached the config file. I could not find proper docs on setting up this device as a terminal server. I have followed the following link but did not work.
 
[URL]
  
There are 16 Async (0/0/0 - 15) interfaces and also the following lines.
line 2line 0/0/0 0/0/1line 0/0/2 0/0/15
  
How can I connect to other Cisco devices via the terminal router?

usage of above 16 Async interfaces and lines.

View 4 Replies View Related

Cisco :: Configure 1811 As Terminal Server

May 15, 2012

I've heard that you can configure an 1811 router as a terminal server for remote console work.I have several of them in the lab and would love to try it out.

View 2 Replies View Related

Cisco :: 2600 Router With 4A/S Module Can Be Terminal Server

Jul 11, 2011

I have a cisco 2600 router with 4A/S module, can it become the terminal server? If yes, which kind of octal cable should I choose to connect to other cisco routers console ports?

View 0 Replies View Related

Cisco :: NM-16A / Embedded Menu Manager For Terminal Server?

Mar 25, 2012

Using EMM as a nice friendly interface for their terminal server (ie router with NM-16A and octal cables)?when I ask the framework to run the following command it gets stuck will a blinking cursor and clear screen
 
<IOSExecCommand>"connect 10.1.1.1 2000"</IOSExecCommand>
 
however removing the port number allows it to connect fine.
 
<IOSExecCommand>"connect 10.1.1.1"</IOSExecCommand>
 
same symptom if iI were to replace connect with telnet

<IOSExecCommand>"telnet 10.1.1.1 2000"</IOSExecCommand>
 
even setting up an iphost does the same ie:

ip host R1 2000 10.1.1.1
<IOSExecCommand>"connect R1"</IOSExecCommand>
 
All of these commands work fine from the # prompt

View 3 Replies View Related

Cisco Infrastructure :: 2811 Terminal Server Configuration

Nov 30, 2011

i trying to set up a terminal server, 2811 with an HWIC-16A und two octo cables. [code] connect and sometimes not. It seems the connection is established but i don't get a prompt von the target device.The target devices are cisco 2811 and cisco catalysts 3560.

View 1 Replies View Related

Cisco WAN :: RV082 Dual Wan Terminal Server Configuration

Jan 31, 2012

I've a RV082 with 2 internet connections.The idea is to permit external connections to my server and if one Internet line falls, automatically switch to the other.
 
We have configured the router in Smart Link backup.We try to connect with WAN1 and WAN2 enabled and all works fine.
 
We try to connect with WAN1 disabled and automatically WAN2 is activated.The problem start here...if WAN1 is activated while there are connections using WAN2, these connections falls!
 
How I must configure the router to permit that active connections are not disconnected from WAN2 even when WAN1 connection come back?

View 1 Replies View Related

Cisco WAN :: 2901 Terminal Server And Restricting Access

Apr 19, 2011

I have a Cisco 2901 Terminal server with AAA authentication via ACS server.  I create twoaccounts on the acs server, cciesec2011 and vendor.  Both accounts can log into the Cisco 2901 Terminal Server without any issues.  By the way, I am NOT using AAA authorization on the  Cisco Terminal Server.  Once cciesec2011 or vendor accounts are authenticated, theseaccounts can access all the async line on the Cisco Terminal Server.
 
Now I have a new requirements.  I would like to allow cciesec2011, once this account is successfully authenticated, this account has access to ALL async line on the Terminal Server.  The "vendor" account, I want to restrict this account access only to async line 35 (there are 32 async lines available on the Cisco Terminal Server) and nothing else.
 
How can I accomplish without using AAA authorization on the Cisco Terminal Server?Is it possible to use "privlege level" to accomplish this?  if so, how?

View 5 Replies View Related

Cisco Firewall :: ASA 5510 Email And Terminal Server Going Out

Mar 5, 2011

I am having two issues:
 
1. my email going out is working along with internal, but inbound email is not working. My barracuda email filter is 192.168.1.107 and my exchange 2007 is 192.168.1.222 along with this OWA does not work.
 
2. Terminal Services does not work when I try from the home pc in I get server not available or disconnected

Below is my congig

ASA Version 8.3(1)!hostname wsigatewaydomain-name wsystems.comenable password yVSkMxWRc/S396FB encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Ethernet0/0 nameif outside security-level 0 ip address 64.XXX.XXX.XXX 255.XXX.XXX.XXXinterface Ethernet0/1 nameif inside security-level 100 ip address 192.168.1.1 255.255.0.0!interface Ethernet0/2 shutdown no nameif no security-level no ip address!interface Ethernet0/3 [Code]....

View 2 Replies View Related

Cisco WAN :: 3620 - Router Configuration For Terminal Server

Feb 1, 2011

Any example of router config for a terminal server.In fact I need a configuration for a router with multiple, low speed, asynchronous ports that are connected to other serial devices, for example,modems or console ports on routers or switches.With this router I would like to use a reverse telnet to connect with my devices using the serial connection.I find many examples on the Cisco web site but none with my router hardware configuration.My router is a 3620 router with a 8 port async (NM-8A/S) network module and I would like to use the 8 serial interfaces, each of them connecting a serial device.
 
Here is the show run and show ver :Router#show ver Cisco Internet work Operating System Software IOS (tm) 3600 Software (C3620-I-M), Version 12.3(25), RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Mon 28-Jan-08 20:16 by alnguyen
 
ROM: System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Router up time is 1 minute System returned to ROM by reload System image file is "flash:c3620-i-mz.123-25.bin"
[Code]...

View 1 Replies View Related

Network Printers Disappear After Logoff - Logon To Terminal Server?

Feb 8, 2012

I have an annoying problem with networked printers disconnecting/disappearing when TS users logoff. Current configuration is: SQL server (WinSvr 2K8 R2 Std) has printers installed on it (standard TCP/IP Port) and printer is shared, there are also some printers installed on the DNS server and a couple of satellite offices. Users connect to TS servers (WinSvr 2K8 R2 & WinSvr 2K3) printers are connected and work fine until they logoff, when they log on the printers are gone "sometimes some printers are still there!?" I have tried logging onto the server as domain administrator and connecting printers but they won't even stay for administrator (have had this with win7 client machines) and tried directly 'console' at the server. I have looked at the printers on the SQL server and sharing properties, it is stoping printers from coming back at login on TS Note that local (client machines) connecting to the same shared printer from the SQL server don�t have the problem it's just on the TS server.

View 2 Replies View Related

Cisco Firewall :: 2511 How To Access Terminal Server Remotely

Sep 21, 2011

I have verizon wireless router to connect to the internet via FIOS. The public IP on the wireless router is DHCP assigned. I have my home lab with cisco 2511 and octal cables. I would like to be able to access the terminal server remotely via the internet when I'm not in. I'm concerned cause the wireless router is DHCP assigned IP. Even if I have a static IP on the ethernet port of the 2511 connected to the wireless router, I'm not sure if the NAT will work so it can be accessible from the internet.

View 2 Replies View Related

Cisco Switching/Routing :: 6500 - How To Set Switch On Auto Terminal Server

Apr 22, 2012

I have a switch(6500) with 2 vlans(2 SUBNETS) and from the other side of my network i have 2 terminal servers.

I want to have a VIP in my 6500 switch which i have the 2 vlans and when the first vlan(network) try to connect to the VIP

my switch will forward to first terminal.When the second vlan try to connect to VIP the switch will forward to second terminal.
 
I'd like the switch to decide in wich terminal server will forwared the packet based on source network.
 
I am not sure how i can do this???I use VIP with SLB???I use NAT???PBR?

View 4 Replies View Related

Cisco :: 2600 Terminal Server Can't Connect To 3750 / 3560 Switches

Jul 23, 2012

I have a 2611XM that I am using as a terminal server for my lab setup.  Async is using octal cables.  It works great with routers of all different models, but when I connect a switch of any model, it does not work.  The connectivity LEDs don't even light (they do for the routers).  The switches in question are 3750s and 3560s. 
 
I have tried straight through from the octal cable to the console port of the switch, as well as a rollover with a converter, no luck.  This does seem to be independent of configuration on the console port - even before the console port of the routers were properly configured, I at least had indication of physical connectivity.

View 2 Replies View Related

Cisco Switching/Routing :: Unable To Login To 2960 Via Console Through Terminal Server

Oct 23, 2012

I have a set-up with multiple C2960 and C3750 switches. All these devices are being managed remotely. So basically I login to C2901, which is used as a Terminal Server,  and reverse SSH to the console of each device. That's - I have assigned an IP to each port of the terminal server so that I can SSH directly to the desired device through via the mapped IP.
 
Now, recently I had to restart couple of switches - one C2960 and C3750. I initiated the reboot via console connection remotely. I could see the device logs for some time and then the logs stopped and there was no reaction from the console irrespective of any command I tried to enter.
 
I tried resetting the line on the terminal server, but that didn't work.
 
Now when I try to SSH the IP mapped to console of that particular device - i dont get any login prompt and there is no effect on device after giving any command. Although i can see the logs on the console session - but cant do anything.
 
I have a second way of connecting the device via inband- management, and checked the device config found it correct. It is same as other devices which are working correctly.
 
Both C3750 and C2960 are behaving exactly same - can see logs on console but see effect of even pressing enter - not getting login prompt as well.

View 4 Replies View Related

Sharing :: Uploading Website On WWW Server?

Aug 10, 2012

getting process to upload my website on WWW Server?

View 1 Replies View Related

Sharing :: Files Looking For Old Server Path?

Dec 26, 2012

Recently I've changed my all local I.P. series in the server from 192.168..to 10.219..& the server 2008 providing through DHCP.So, I've to re mapped the share folder to change the path in every system.But few files in 1 PC are still keeps the old share folder path when trying to open & failing or taking long time! NOT all files in that machine

View 1 Replies View Related

Sharing :: PC To Wii Streaming Media Server?

Dec 24, 2012

im wondering if there is a streaming service that can allow my movies on my pc to be played on my wii.i know that there are for xbox/ps3 but not sure for the wii's.

View 5 Replies View Related

Sharing :: Setting Up A Home File Server?

Jun 15, 2012

I have a PC ready to use that I want to be used for sharing files, pictures and videos on between our multiple PCs in the house hold. I am going to have it constantly running (I have alot of cooling for it) but I need setting it up.I dont know if I should use Ubuntu Server or FreeNAS?

View 1 Replies View Related

Sharing A Folder Across A Domain Server And Workgroup?

May 7, 2012

i have been trying share a folder across the network but with a lot of difficulty.the folder is on a server 2008R2 on one domain while the work stations are on a work group. how do i get the work station to access the shared folder without any password issues.

View 2 Replies View Related

File Sharing Windows 2003 Server?

Aug 29, 2011

can you show me some screen shots on how to share file in the windows 2003 server operating system?

View 1 Replies View Related

Sharing :: Limit Of Connected Users In Server 2008?

Sep 28, 2011

I've got an HP Microserver, running server 2008 R2 foundation, and I'm using it for file sharing. All files are in a single folder with subfolders, and located in drive C.

The problem is that the server limits the number of LAN connections to it to 31. I've already changed the max. number of connections to the maximum, but doesn't seem to work. Network discovery and file sharing are on, firewall is off, full access rights for everyone.

The error I get when trying to access the shared folder is: 'Microsoft Windows Network: No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept'

View 3 Replies View Related

Setup Multiple Drive Sharing With A Filezilla Server?

May 4, 2011

I have set up a filezilla server, and connected to it, and was able to access my files in the main drive (C:/), but at this point the unsolvable problem for me has to do with being able to access multiple drives wirelessly.Filezilla's FAQ says it has to do with aliases, etc, but when I tried this, my main drive dissappeared and I was only able to access the alias drive.All I wanted to do was back my Android's content up to my computer. From what I understand, FTP is a good way to do this. Let me ask you something....is it possible to upload stuff to my computer's ftp server even without being connected to the same wifi network?

View 3 Replies View Related

Servers :: Disable Protection Sharing Windows Server 2000

Mar 27, 2011

disable protection sharing win server 2000

View 1 Replies View Related

Sharing :: Use Old Computer As Auto-sync Backup And Production Server?

Jun 20, 2011

I have this idea of using my old computer (which is still pretty awesome) as a back up + production server. What this would entail would be that each person in my house has a dedicated hard drive that auto-syncs folders they've selected for backing up (not Memeo under any circumstances!). Then there will be a hard drive for me to work on web projects on. I'd like this computer to be very secure but if needed, I could show my work on the production drive to my boss.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved