Printing To Local Printers From TS App Via VPN - 32-bit Server?
Sep 5, 2012
I have walked into a company that has several small (1-4 PC's each) remote locations, and they all connect to Terminal Server to use our POS app. This app will not keep redirected printers saved between each session, so in order to save the printers, they have software VPN's set up on each client, then the local printers are installed on the server through a Local Port using the VPN ipaddressprinter share name. This allows the printers to be saved in the program and not re-assigned each session. Now, let's say that I have implemented a new desktop replacement procedure, and we are now in phase one of said procedure. I have purchased Windows 7 64-bit desktops. After setting up my deployment standards and testing in-house, I placed one of these PC's in the field. This is where I learned the issues of printing from a 32-bit server to a 64-bit client. I have not been able to successfully print to the printer installed on the server using the Local Port of the client, print job errors out. I have done some research, and found the issues with printing from 32-bit to 64-bit, and have installed all the additional drivers I can find, with no success.
View 1 Replies
ADVERTISEMENT
Nov 25, 2012
I have a major wired network issue.It manifests itself as not being able to print to my two home network (wired) printers and speedtest upload test fails.I can disconnect the ethernet cable from the failing desktop and plug it in to a laptop and everything works fine.I have tried disabling AVG firewall.
View 2 Replies
View Related
Jan 16, 2012
how can i add two printers of different hp series to the same local network ?
View 1 Replies
View Related
Nov 20, 2012
I have a 2504 WLC with 3 1262 WAPs in lightweight mode.
Clients connect using WPA2 PSK AES with no problem. Clients are Windows XP Home SP3. Test pages end up in print queue and eventually get a error printing status. Clients are not part of a domain and in a standalone workgroup - techstream.
Printer can be pinged from wireless client.
Another 1262N WAP in standalone mode connected to same lan from windows 7 sp1 clients have no problem printing to a local printer.
What does work on the Windows XP Home client is connecting to a network shared printer authenticating with domain admin id and password and it works. Reboot and the network shared printer can not connect multiple reasons are "access is denied" and message box says "only security tab will be displayed....." Another Windows XP Home SP3 client on reboot can't open the network shared printer with message "Can't find printer"
The local printers do work on these pc's with an old colubris router that has an outside interface on our lan and internal network with clients getting dhcp address from colubris router of 192.168.3.XXX .
What is wrong with the wireless 2504 WLC?
View 4 Replies
View Related
Mar 3, 2012
I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies
View Related
May 11, 2011
Im having some printing issues whenever im working on the terminal server. If I try to print a document out in "landscape", it will print out "portrait", seen though it displays properly in landscape in the print preview. If Im working locally on my PC, it prints out fine.
View 2 Replies
View Related
Sep 11, 2011
Here is what we are trying to do: (server names have been changed to protect the innocent, etc.)3 servers at 3 different locations - all running Server 2008 R2 and all on the same domain
setup:
server01 (has the print server role and printers are shared out)
server02 (has the print server role and printers are shared out)
terminal_server (a terminal server)
We have printers on server01 and on server02 that we need to install on terminal_server.The printers install just fine onto terminal_server from server01 when browsing and connecting or opening the shared printers.
The printers on server02 give thes error message when trying to connect to or open them from terminal_server:"The operation could not be completed (error 0x00000709). Double check and make sure that the printer is connected to the network."However, the printers from server02 will install and work just fine IF I install them as IP printers.
View 6 Replies
View Related
Jun 19, 2012
We have a new building coming online. It is a layer 3 connection (OSPF) between our core and this building. I have a handful of VLANs configured at this building (using VTP) and I'm having a problem with only 1 of them (the printer VLAN).From the print server (a virtual machine who's host is directly attached to our core switch - a Cisco 6509), I can NOT ping any of the printers at the remote building. But I can ping the gateway for that vlan (which is on the L3 switch/router for the building - a Cisco 3750X).However, if I put a laptop on that vlan at the building, I can ping the print server as well as the other printers.
I ran a traceroute from the print server to the printer's IP address and after hitting the building's router, the requests just started timing out.
I double, triple, and quadruple checked the laptop and printer configurations. In my troubleshooting,I even created a DHCP scope and added the ip helper-address to the interface vlan. My laptop, connected to a switchport on that vlan received the IP address, DNS server info, etc. from the DHCP server (which is on the same vlan as the print server). From my laptop, I could get to all of our internal web servers. I configured the firewall to allow that IP range internet access, and had full internet access on my laptop.But still, I could not ping my laptop or the printers from the print server.
No change in the traceroute.
I then created a vlan interface on the access layer switch (a stack of Cisco 2690Ss) that the printers and my laptop were connected to.From the print server I *could* successfully ping that vlan interface.Traceroute went right to it (3 hops from print server - core switch, router at building, vlan interface on distribution switch).But I could still not ping the laptop or any printers from the print server.
I even wiped out all config related to this vlan - the vlan interfaces on the distribution switch and the L3 switch, deleted the vlan itself, the router network statement, etc. Then rebuilt it all over again.Same results. I've compared every line of config for this vlan to other vlans where this problem is NOT occurring and can find no difference.
View 6 Replies
View Related
Feb 8, 2012
I have an annoying problem with networked printers disconnecting/disappearing when TS users logoff. Current configuration is: SQL server (WinSvr 2K8 R2 Std) has printers installed on it (standard TCP/IP Port) and printer is shared, there are also some printers installed on the DNS server and a couple of satellite offices. Users connect to TS servers (WinSvr 2K8 R2 & WinSvr 2K3) printers are connected and work fine until they logoff, when they log on the printers are gone "sometimes some printers are still there!?" I have tried logging onto the server as domain administrator and connecting printers but they won't even stay for administrator (have had this with win7 client machines) and tried directly 'console' at the server. I have looked at the printers on the SQL server and sharing properties, it is stoping printers from coming back at login on TS Note that local (client machines) connecting to the same shared printer from the SQL server don�t have the problem it's just on the TS server.
View 2 Replies
View Related
Apr 22, 2012
i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies
View Related
Oct 31, 2011
Our companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
View 1 Replies
View Related
May 16, 2012
My pc in the LAN can ping the local server but cannot connect ( cannot browse) it.Others in the LAN can connect it. I can also connect Internet but , not the local server. (when I type \192.168.... on my computer browser , answer " window cannot access \192.168.........)
View 11 Replies
View Related
Feb 22, 2011
System was running fine untill about two days ago. File and print sharing stop working. went to services and tried to restart "Computer Browser". It would not start due to a dependancy. Tried to start "Server Services" Got the following error. "Can not start Server Service on local computer, Error 2:The system cannot find the filed specified". The files srvsvc.dll 95KB 4/14/2008 The file srv.sys 327KB 4/14/2008.If I delete either of these files they are just created again. If I replace them with the new versions they are converted back to these files.I am running XP Pro SP3.
View 3 Replies
View Related
May 23, 2011
I'm trying to develop and test a website from my iPad. I have my laptop and iPad on same local network, 192.168.1.xThey can see each other over network and I can access the page:192.168.1.105:80 (my laptops local web server) from both iPad and laptop. However the application server runs on port 8080 and I cannot access this from either device/machine. the router's firewall is playing a role, and I have no software firewall running on laptop that I'm aware of (turned off windows 7 firewall).localhost:8080/myWebSite or 127.0.0.1 also works on port 8080.The only combo that does not work is 192.168.1.105 with port 8080. I need this so the iPad can hit the site so I can test locally while developing.
View 4 Replies
View Related
Feb 2, 2011
When i connect VPN in server site then I can't use my Local Internet connection?
View 1 Replies
View Related
Feb 14, 2011
One of our servers recently lost its outbout network connectivity. It can ping and communiate with any computer on our LAN, but it can't communicate with anything outside our network. It has a statically asigned IP address, and can ping the default gateway. We haven't changed any settings on the firewall or gateway....
View 1 Replies
View Related
Mar 7, 2012
I am testing a Aironet1040 in AP setting. During the process of trial run of GUI on this 1040, I saw a local radius setting and it can set something like FAST-EAP.
Is it after using this setting (plus other steps), I can set this Aironet1040 as an AP with the capability of simple Radius Server for authentication purpose?
If not by this way as I mentioned above, can Aironet1040 be set as simple Radius Server? This is because if it can set as simple Radius Server and not need to work with an external Radius Server, that would be great and save trouble to find another server.
View 5 Replies
View Related
Feb 19, 2013
Im trying to configure remote access VPN on ASA5505. I configured it as local CA server, installed digital certificate on remote station and everything looks fine as far as i can see. I'm using cisco VPN client 5.0 on remote station. when i initiate VPN session it fails while trying to connect. Looks like im missing some configuration but i cannot figure out what it is. Currently i have firewall configured to use group authentication and everything works fine. I want to switch it to use certificate authentication, and if possible, confiure firewall to use main mode instead of aggressive mode for better security.
View 4 Replies
View Related
Jan 25, 2012
Since the number of computers are expanding at my home, I want to reduce Wireless Connectivity and increase Ethernet connection between computers. I will be running a Server that supports 10 TB Storage.Will a Custom PC be better or should I use a NAS connected to a web server?
I currently use a Linksys WRT160n router that supports only 4 ethernet connections.Now I need at least 40 Ethernet connections. Will a Switch do? Also I will be running Asterisk to support Telephones.
My web server will not function globally. Only in LAN.And also, the web server will have a 250gb Wikipedia Dump that will deploy 10 times; and also a lot of video from KhanAcademy for knowledge base.I am looking for something powerful which will be quiet and have less downtime.I have checked out Newegg, eRacks, and many other websites. But I am confused with what to consider buying.
A Local Web Server or a custom built PC for 10tb hard drive suppoty.Router that can provide wired connection to about 40 users.A Terminal so I can monitor the bandwidth usage.
View 19 Replies
View Related
Dec 15, 2012
I build a local DNS for namming my local network on windows server 2008 , but due to setup local DNS ,when I want to connect to internet from my pc , I can't do it . because my DNS set with a local IP such as 192.168.1.10. What can I do that have an Internal DNS and can use internet with that too.
View 1 Replies
View Related
Dec 30, 2011
Charter tech came today to solve my problem of my new modem not working, he fixed the Modem but i think he did something to the lan proxy settings after.I'm trying to set up my Belkin wireless G router but i do not have the orginal CD. What should my address be under the "Use a Proxy server for your LAN" checkbox and what is the port and should i check off the bypass proxy server for local address box?
View 4 Replies
View Related
Apr 24, 2012
i'm trying to find out whether my e4200 has the possibility to be a local DNS server and if so, how I can configure it. As it is right out of the box, i cant ping any of my local machines on DNS.
View 4 Replies
View Related
Mar 19, 2013
I got a new Cisco 3845 under my adminsitration. For some special events I do automated actions (e-mail's) from Cisco Works 2000.
One is if power supply fails. Problem now is, tha a ps fail message will be repeated every 20 seconds to syslog server - but local log on router only once.
View 1 Replies
View Related
Mar 16, 2011
I have redirected the IE Favorites folder to our network but I need a script to copy the Favorites to the new location.
View 2 Replies
View Related
Jun 10, 2012
I need configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.I have attempted to configure rdp access but it does not seem to be working for me. How to modify my current configuration to allow this? I need to allow the following IP addresses to have RDP access to my server: [code] The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. My configuration file and what are the commands i need in order to put this through. Also, if there are any bad/conflicting entries. Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course.Also the bolded lines are the modifications I made but that arent working. [code]
View 8 Replies
View Related
Jan 10, 2012
I have a local web development server that I'd like to open up so my clients can see the sites I build for them. The server is just my old laptop that I now use only as a web server.
I'm having trouble figuring out the port forwarding for this. I have a Netgear WGR614v9. I've configured the server to have a static IP, and have port forwarding sending port 80 over to the server. I've made an exception in Windows Firewall for port 80.
So, from my understanding, I should be able to go to my http://[my public ip], and I should in the least see my servers default site.
I think my problem is that I don't have just one website hosted by Apache. But instead am using Virtual Hosts to have a handful of sites hosted. So what I don't know is how to configure the server to know what site to serve.
I know I'm missing a step with having DNS setup. I haven't gone through that step yet because I thought it wasn't immediately necessary to configure the port forwarding.
View 13 Replies
View Related
Mar 30, 2011
I like the ASA 5505 for SMB and Home Offices very much, but I'm missing sadly a DNS Server or at least the ability of the DHCP Server to use static addresses for certain MAC's. In SOHO's the ASA is the only thing always powerded on and often even a Server where a DNS Server could be installed is missing.So is there a chance to see such a feature (DNS Server and/or static DHCP) in the next SW Release? how name resolution in a small LAN can be done without a local DNS Server?
View 3 Replies
View Related
Sep 2, 2012
how can i block local server ip address in WAP321?I set captive portal web page and user accounts for guests but I still can map into my local server once the guest account is log in to CP.
View 1 Replies
View Related
May 24, 2012
I have a Cisco 831 router (c831-k9o3y6-mz.124-5c.bin) that cannot backup the config to a local tftp server. I have seen this behavior on a few different Cisco devices over the years and have never found a solution. The connection is made to the tftp server (in this case tftpd but similar behavior on any tftp server) and a blank file is created on the target machine file system, but the data is never transferred.
The router shows %Error opening tftp://192.168.0.2/router-confg (Timed out) [Failed]
The tftpd log shows 5 repeated attempts at the file write.
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:40.922]
Write request for file <router-confg>. Mode octet [25/05 11:56:40.922]
Using local port 61607 [25/05 11:56:40.922]
<router-confg>: rcvd 0 blk, 0 bytes in 3 s. 0 blk resent [25/05 11:56:43.922]
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:43.923]
[Code]...
This is also stopping me upgrading the image on the router as I cannot transfer in the other direction either.
View 1 Replies
View Related
Oct 11, 2009
I'm having a problem configuring local EAP Authentication using CA (Windows Server) and LDAP server. I followed the URL:
[URL]
but it seems that CA has no effect. Any wireless client who has his own LDAP account can access to the network.What I want is just allow some wireless clients to access if they have approved CA before.
View 2 Replies
View Related
Oct 4, 2012
I am configuring remote access vpn on ASA5505.Everything is working fine so far, except when the client got connected, it still used the local DNS server provided by the ISP. How do I force the client to use the DNS server configured on ASA?
View 7 Replies
View Related
May 4, 2013
I have a Cisco ASA 5505 in my home office which has a few PCs behind it with a linux web server running some websites. I can access the websites from outside no problem (i.e. on my iPhone using a 3G connection). However, I struggle to access the websites from within the network. The ASA gives me this error: [code]
View 3 Replies
View Related
Sep 1, 2012
i have 5508 WLC and 1242 LAP . i 5508 connects to core switch and LAP connects to access switch, and there is L3 link from core swtich to access switch , so i have to use HREAP to let my WLC to control my APs.in my access switch i set ip helper-address to my WLC in the client vlam, then all the wireless clients cannot get ip address from the WLC.but if i set ip helper-address to another DHCP server , the wireless clients can get ip address .so i dont know why WLC cannot be the DHCP server of the wireless client?
View 3 Replies
View Related
