Cisco Wireless :: Block Local Server IP Address In WAP321?

Sep 2, 2012

how can i block local server ip address in WAP321?I set captive portal web page and user accounts for guests but I still can map into my local server once the guest account is log in to CP.

View 1 Replies


ADVERTISEMENT

Cisco Routers :: RV016 PPTP Server And Block MAC Address

Apr 2, 2013

So if the PPTP server is enabled, and "Block MAC address not on the list" is enabled under the DHCP settings, will the PPTP client get an IP address?Similarly, if the PPTP server is enabled and the range of IP addresses configured on the PPTP server screen is outside the IP range of the router due to a subnet mask (like 255.255.225.248 for example), will the IP still be assigned to the PPTP client? If assigned, will that IP have any connectivity to the LAN?

View 1 Replies View Related

Check Off Bypass Proxy Server For Local Address Box?

Dec 30, 2011

Charter tech came today to solve my problem of my new modem not working, he fixed the Modem but i think he did something to the lan proxy settings after.I'm trying to set up my Belkin wireless G router but i do not have the orginal CD. What should my address be under the "Use a Proxy server for your LAN" checkbox and what is the port and should i check off the bypass proxy server for local address box?

View 4 Replies View Related

Cisco Wireless :: WAP321 Not Passing IP Address To Client

Mar 20, 2013

Our brand new WAP321 is configured manually because the setup wizard would not complete, just hangs at the end.
 
Anyway, when a client connects to the AP, it cannot get an IP address.  It is able to connect to the AP but does not pickup an IP from our internal DHCP server. I've been up and down tthe config screens and even tried hard resetting the AP and starting from scratch to no avail. This happens with 2.4Ghz and 5 Ghz modes.
 
I've tried laptops and smartphones with the same result.

View 2 Replies View Related

Cisco Wireless :: WAP321 - How To Limit Access To Two IP Address Via ACL

Aug 29, 2012

I need to limit access to two ip address via acl but when i add them to the list i lose access to internet.

View 1 Replies View Related

Cisco Wireless :: WAP321 Configure IP Address On Management VLAN

Feb 26, 2013

I have a WAP321 I am trying to set up.  It's connected to gi1/23 and the switch system mode is set to router.  The rest of the network works just fine.I have an SG500-28p and the port. [code] On the WAP321 wizard, configured IP address on my management vlan and also configured the default SSID on that vlan.  That works. (I plan to remove that one) Then I add the two SSIDs for vlan 20 and 22 (private and public access)  and I can't associate to either of the two additional SSIDs. I haven't configured any other settings beyond the wizard and adding the other two SSIDs.  I do want cisco mobile ios (jabber) to work on the private network and also do have a couple spa525g2s that need to connect wireless.

View 1 Replies View Related

Cisco Wireless :: WAP321 - Loosing Connection To DHCP Server

Jan 1, 2013

I have two WAP321s in my office.  The network they are on is a single VLAN (172.16.10.x).  Both WAPs are setup with the same SSID, and I have setup Single Point Setup.
 
I am having a problem that was happening before I setup Single Point Setup, and it is still happening.  Basically wireless will be up and running fine for part of the day.  Then people throughout the office will begin to lose their connections to the DHCP server.  They still retain the connection to the WAP, but can no longer access the network. 
 
The only way I have been able to fix this issue is to reboot the WAP.  As soon as it reboots the connections come back.  At first I thought it was due to the number of connections (which is why we now have 2 WAPs), however we only have about 20-25 conncurrent connections. 
 
I put in the second WAP to try to balance out the load but this does not seem to be working.  Is there a setting I need to change on the WAPs to balance out the load?

View 13 Replies View Related

Linksys Wireless Router :: Wrt54gs / Setup Local DNS Server To Manage Small Office Local-only Domain Names?

Apr 22, 2012

i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.

View 1 Replies View Related

Cisco Wireless :: WAP321 Lost Time - Cannot Sync With Time Server

Jul 8, 2012

I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT".  I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.

View 5 Replies View Related

How To Block A Port On Local PC

Sep 25, 2011

I dont currently have access to the router and i was wondering is there a anti-virus program that allows you to block ports to the local pc? Or is there another way to block programs using peer-peer network connections such as PPS.

View 3 Replies View Related

Linksys Wired Router :: RVL200 / RVS4000 Possible To Assign Public IP Address As Local IP Address?

Feb 28, 2011

Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?

View 1 Replies View Related

Linksys Wireless Router :: Block An IP Address With WRVS4400N?

Nov 8, 2009

I've been keeping an eye on my IPS report tab lately and have been watching a large number of ICMP_SMURF and DOS attacks originating from chinese ip address's.  I know I can probably block the offending ip's through the ip based acl tab in the firewall settings, but I'm kind of a newbie how I can block certain ip's from touching my router?

View 3 Replies View Related

Linksys Wireless Router :: E4200 V2 - Block Public IP Address?

Feb 2, 2013

i got an E4200 V2 and it is updated to Linksys Smart Wifi firmware.. Is it possible to block a specific public IP address?

View 4 Replies View Related

Cisco Firewall :: How To Block Websites Using Local Content Filtering On A 876 Router

Nov 3, 2012

I found an interesting manual at this forum for blocking websites whits local content filtering. After I've modified the variables to get more details, I stopped at on question. My current Problem is "zone-pair.
 
zone security Z-SECRUTIY-SOURCE
zone security Z-SECRUTIY-DESTINATION
zone-pair security ZP-SECURITY source Z-SECRUTIY-SOURCE destination Z-SECRUTIY-DESTINATION
service-policy type inspect CM-INSPECT-TRAFFIC

[code]...

View 7 Replies View Related

Cisco VPN :: ASA5510 / Make Some Local Policy With Client Of SSL VPN AnyConnect And Block Access To Internet

Dec 12, 2012

I can make some "local policy" with client of SSL VPN AnyConnect and block access to internet?

The user would only have access to the internet if he was connected to the VPN (by internal proxy).

View 10 Replies View Related

Linksys Wireless Router :: EA4500 - Block Specific Site Based On Keywords In Webpage Address?

Apr 2, 2013

I have an EA4500. I am trying to block a specific site based on keywords in the webpage address. how to get the EA4500 to block sites with based on keywords.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 / Enable Parental Controls Or Access Restrictions To Block MAC / IP Address?

Mar 13, 2013

I have been looking into this router, I would like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?Instead of Midnight to 6:00 am.My E4200 works just fine, Just would like to know if the EA6500 Can do that ?

View 7 Replies View Related

Linksys Wireless Router :: E4200 As A Local Dns Server?

Apr 24, 2012

i'm trying to find out whether my e4200 has the possibility to be a local DNS server and if so, how I can configure it. As it is right out of the box, i cant ping any of my local machines on DNS. 

View 4 Replies View Related

Cisco Wireless :: 5508 - HRES Local Switching With WLC As DHCP Server

Sep 1, 2012

i have 5508 WLC and 1242 LAP . i 5508 connects to core switch and LAP connects to access switch,  and there is L3 link from core swtich to access switch , so i have to use HREAP to let my WLC to control my APs.in my access switch i set ip helper-address to my WLC in the client vlam, then all the wireless clients cannot get ip address from the WLC.but if i set ip helper-address to another DHCP server ,  the wireless clients can get ip address .so i dont know why WLC cannot be the DHCP server of the wireless client?

View 3 Replies View Related

Cisco :: Private Address Block 172.16.0.0 - 172.31.0.0?

Apr 11, 2011

how the address stops at 31 in the second octet. I'm not even completely sure how it starts at 16 for the first address (172.16.0.0). are we dealing with subnets?

View 10 Replies View Related

Block A Computer By Its MAC Address Not By IP?

Feb 16, 2011

I want to block a computer by its MAC address, not by IP, from accessing Internet.

View 1 Replies View Related

How To Block Mac Address In Windows 7

May 21, 2012

I have blocked a hacker from hacking my pc, I tracked his IP and then blocked it.

View 1 Replies View Related

Block A Mac Address From Home Network?

Dec 16, 2012

How to block a mac address from my home network?

View 4 Replies View Related

Cisco Firewall :: Block Website Or Ip Address From ASA 5505?

Apr 27, 2011

if it is possible to block a website or ip address from an ASA 5505? if it is possible, can you give me an example of the commands to get it done?

View 2 Replies View Related

Cisco Firewall :: ASA5510 - Block IP Address From Outside Interface

Jun 23, 2011

Recently, I've been having significant problems with denial of service on our ASA-5510. Two IP addresses in particular attack my ASA regularly. What kind of rule do I need to create to deny these IP's access to my firewall?

View 4 Replies View Related

Cisco Wireless :: 2504 / Assign IP Addresses To Remote Site Wi-Fi Users From Local DHCP Server?

May 29, 2012

Is it possible to assign IP addresses to remote site WIFI users from local DHCP server and forward all other traffic to 2504 WLC?
 
[WIFI Users] >--------<AP (DHCP server) >------ VPN ---------< WLC

View 1 Replies View Related

Linksys E2000 Router - Block LAN Mac Address?

May 10, 2011

what would be the easiest way of blocking a mac address from LAN not wireless, the router is Linksys E2000 and the reason isnt important, just that i want to do it, i have full access to router

View 7 Replies View Related

Block Iphone / Devices From Getting IP Address From DHCP?

Feb 23, 2012

I've came across IP address that aren't enough for some users in the company. The IP addresses are more than enough to cater to the user's notebook or PC. However, some users does not know that there are actually limits to the IP we have, so quite a number of them actually uses their mobile / pads to tap the company's wireless.

I was wondering if i could restrict that particular user from tapping onto the network. I know it sounds a bit impossible because DHCP doesnt have that smart function to block whoever we sees deemed as a "nuisance".

View 29 Replies View Related

D-Link DIR-655 :: Need To Block Certain IP Address To Be Accessed By All Computers

Dec 3, 2011

Bought DIR-655 from Amazon. Rev. B. Come with 2.00NA firmware. Updated to latest one, and there are a lot of problems, to most of them, I was not able find any solution. Here they start:

1. WIFI SPEED PROBLEMS.No matter what speed, parameters, channel, mode, etc I select, router keeps working on 20mhz channel width. So I never get speeds above 65 mbit. In absolutely same conditions, my DIR-300 B1 (with DD-WRT firmware) gives me stable 150mbit. SO I KINDLY ASK, MAYBE THERE IS A WAY TO FORCE "40 MHZ ONLY" OPTION?

2. PASSWORD PROBLEMS.Router came with no admin password, I enter new password, hit "update" it says - wait 20 sec, after that, login page is displayed, but, new pasword does not works! since it asks again for empty password!

3. FILTERING PROBLEMS.I need to block certain IP address to be accesed by all my computers. Say this is 111.111.111.111 . So I added inbound filter rule, to block access to that IP. It does not works - IP is still accesible.

4. MORE FILTERING PROBLEMS.Since above mentioned method does not works, I have to use "ACCESS CONTROL" feature. It does works, but it causes another problem, with access control enabled, all webpages with form submit stop to work. For example, if I'll have that feature enabled, when I press "post" on this webpage, it instantly will go to "this page cannot be displayed".

I bought this router solely for one purpose - I was happy with speed of my DIR-300, but I needed gigabit for my computers. So I thought, instead of buying separate switch, I'd better buy a router with gigabit. I was suggested to get TP-LINK 1043, since it's quite popular, alternate firmwares available and so on, but I refused to buy it, since I thought that some chinese company does not worth my attention. So I bought this D-Link (for almost 2x price of TP-Link) and having huge problems as you can see.

View 9 Replies View Related

Cisco Firewall :: Can ASA 5555 Translate To Secondary IP Address Block

Oct 14, 2012

I just purchased an ASA 5555 and started to configure.  I was successful in natting all the IPs that are on the same subnet as the ASA eth0.  I could not get the nat working for the 2nd address block.
 
Ex:
 
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 192.168.1.33 255.255.255.224
[Code]....

View 4 Replies View Related

D-Link DIR-655 :: Access Control - Block All Computers Instead Of Specified MAC Address

Aug 8, 2012

I want to do what I thought would have been a simple enough task - block my kids phone/computer after certain hours. Instead of blocking the specified MAC address(es), all my computers does not have internet access. As soon as I disable the policy, internet access is on again. Here's what I did:

[code]...

View 4 Replies View Related

Cisco Switching/Routing :: How To Block Single Mac Address In 3550 Switch

Nov 16, 2011

I need to block this mac address in  my 3550 switch.i enable port security but this mac address comes and do the violation and port is shut down.

View 3 Replies View Related

How Does Firewall Block Or Filter Traffic On Specific Port Or IP Address

Nov 15, 2011

How does a firewall block or filter traffic on a specific port or IP address?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved