Netgear WGR614v9 - Opening Local Development Web Server To Public
Jan 10, 2012
I have a local web development server that I'd like to open up so my clients can see the sites I build for them. The server is just my old laptop that I now use only as a web server.
I'm having trouble figuring out the port forwarding for this. I have a Netgear WGR614v9. I've configured the server to have a static IP, and have port forwarding sending port 80 over to the server. I've made an exception in Windows Firewall for port 80.
So, from my understanding, I should be able to go to my http://[my public ip], and I should in the least see my servers default site.
I think my problem is that I don't have just one website hosted by Apache. But instead am using Virtual Hosts to have a handful of sites hosted. So what I don't know is how to configure the server to know what site to serve.
I know I'm missing a step with having DNS setup. I haven't gone through that step yet because I thought it wasn't immediately necessary to configure the port forwarding.
View 13 Replies
ADVERTISEMENT
Apr 28, 2011
I've been pulling my hair out for several weeks trying to connect to a Filezilla server on Windows Vista through my Netgear WGR614v9router.I have received a domain name for dyndns.org and the IP address resolves correctly on the remote computer using the Filezilla client but my computer doesn't respond. I have set up the FTP port to be on 21 and have allowed Filezilla through my firewall on Windows Vista.
View 19 Replies
View Related
Jan 16, 2012
We cant dont know our password for the wireless router So we cant get our kindle fire hooked up or the ipods how can we get this
View 1 Replies
View Related
Dec 30, 2012
do i need to go to my control panal to connet to use it wireless
View 2 Replies
View Related
Mar 5, 2013
change my password netgear wifi
View 1 Replies
View Related
Jul 2, 2012
My netgear wireless router (wgr614v9) wont reboot or let me access the internet what should i do.
View 2 Replies
View Related
Mar 18, 2011
I've got an Optus (in Australia, so 3G mobile broadband is all that matters I would think) that I'm trying to connect to a Netgear WGR614v9 wireless router. So the 3g mobile plugs into usb on computer; the router to the ethernet card on computer.
I know; I could buy one that has it in one package, but we're throwing the router out from work anyway. If this works my daughter will be thrilled with her iPod more is all :)
I've got the mobile broadband on, and plugged in the router and Windows 7 makes a second network connection automatically for the router, though with no internet access, and the setup wizard in the router claims to have no access to the internet. (though clearly I'm posting...lol).
We can see the Wireless signals on devices and can connect to the router but then the devices say no internet access when you actually try to access the web, like the router wizard does. and yet, we are online
View 2 Replies
View Related
Jan 24, 2011
i currently have a netgear wgr614v9 running the most recent firmware update and a tplink nr741nd running the latest dd wrt firmware.the netgear is my main router connected to the modem positioned in the living room attached to this is a wired ps3, wii and various laptops connect wirelessly to this. In my bedroom i have the tplink router is is setup as a client on the netgear router allowing media network drive access to the internet.
eg.
--- wired
~~~ wireless
modem-----netgear~~~~~~tplink----network drive
What i would like to achive is to be able to connect to the netgear router wirelessly and have access to the network drive attached to tplink router.I have tried a client bridge on the dd wrt firmware but this does not work at all. I have read that i need to setup a VPN on the dd wrt but i can find anything on how to do this when trying to access a drive on a second level.
View 3 Replies
View Related
Mar 6, 2011
I have existing wireless system router "Netgear wireless G router WGR614v9" and connected to DELL PC and laptops (two) and both are having window XP system.I have old computer ( Toshiba Satellite 335CDT with window 98 and I want to connect this to my existing wireless system.
1. Can I do this wireless connections.
2. If yes than how to do it, step by step.
View 1 Replies
View Related
Jun 28, 2011
I've just installed a new wireless router (Netgear wgr614v9), but I'm having trouble getting an Acer Aspire 1 (with Linpus Linux) to connect. All other devices within the house can connect (iPod, mobile phone, other laptops), but this laptop wont.It was connected but it disconnected itself and now refuses to connect. Clicking "Connect" on the dialog does nothing. The OS is possibly the worse I've ever used, but there doesn't seem to be much you can upgrade it to.The router is protected with "WPA-PSK [TKIP] + WPA2-PSK [AES]" according to the router setup, it's name is unique and password 8 chars long.
View 4 Replies
View Related
Apr 22, 2012
i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies
View Related
Jul 30, 2012
I am setting up a site to site IPsec connection with a company, something which I have done many times before without trouble. I use ASDM to configure this as it is quick and painless, usually.
We have a number of other site to site connections currently configured and working fine on this ASA, these are configured with the 'Protected network - Local network' configured with the private IP's of the hosts within our network we want to make available through the seperate tunnels. This includes the configuration setting on our ASA for each connection to 'Exempt ASA side hosts from NAT'.
With this new connection however, the company has asked us to use a public IP for the host we want them to reach through the tunnel. I am not sure why but they demand it. So I added a NAT rule for the inside host, and configured the connection with the public IP under 'Local Network'. When testing to try reach a host on their side, the tunnel does not even attempt to initiate.
I cant see where I am going wrong. I am guessing the 'Exempt ASA side host from NAT' does not require to be set for this, as how else would the ASA know which internal host the public IP relates to.
View 6 Replies
View Related
Mar 10, 2011
I've installed XAMPP on one of my Vista computers, and intend to use it as a server. The internal IP address of the server is A.B.C.D. The internal IP address of the DIR-615 is A.B.C.E. whatsmyip.com says that external address of the server is F.G.H.I (and so is everything else inside my network). I have Filezilla listening on port 21. I've turned Windows Firewall completely off on the server, and my ISP (Time Warner / Road Runner) says that they never block any port.I tried going to the DIR-615 using Port Forwarding, and set ports 21 & 90 to forward to A.B.C.D, for both UDP & TCP, Allow All, Always. That didn't work.I tried going to the DIR-615 using Virtual Server. I set a virtual server on port 21 to A.B.C.D, for both UDP & TCP, Allow All, Always. It made me turn off Port Forwarding, and it wouldn't let me use both 21 & 90 on the same rule, so made two rules. That didn't work either.
I tried setting A.B.C.D as a DMZ host. That still didn't work.I can ftp connect into A.B.C.D from one of the other computers in the network. People outside the network can't connect to F.G.H.I. I can't connect to F.G.H.I. from inside the network. The same is true of Apache (but ports 80, 81 & 443), Ventrilo (but ports 3784 & 6100) and MySQL (but port 3306). I figure that FTP is the easiest to test, so I've been just trying to get that to work.In FileZilla Server Options, I am bound to *, I have no filters, and my passive mode is set to "Retrieve external IP"As far as I can tell, if I've ruled out anything inside my network (by connecting internally), and I've ruled out my ISP (they don't block), then it must be the router. I think I've done port forwarding according to [URL], and it seems like it should be easy, but I've been trying forever and I can never get it to work.
View 3 Replies
View Related
Mar 5, 2012
We have a Cisco ASA 5520, and we're creating an IPSec VPN to another Cisco ASA. We have multiple VPNs on this firewall.
The issue with the latest one is they require a Public IP as the Local Encryption Network. I've seen this question a couple times while searching but never really a definitive answer.
Would using the "Outside-Network" as the local encryption network, then natting the appropriate IPs be sufficient? Or would this not work at all?
Our Public block is X1.X1.X1.64 - X1.X1.X1.79, our Peer IP X1.X1.X1.66. Would using X1.X1.X1.64/28 as the local encryption network make the connection? Then NAT the needed IPs from our DMZ X2.X2.X2.71 as X1.X1.X1.71 to the client?
Would this work or am I way off the mark (I'm by no means an ASA expert, and an ASDM explanation would work over command line).
Edit: Or would I have to create a new Global Pool made up of Public IPs on a different subnet mask than our actual Public IP address pool. And make that our Local Encrypted Network? I think this might be it, but could it cause IP overlapping? Our webserver is part of this and I'm worried about causing connection issues.
View 8 Replies
View Related
Dec 15, 2011
We've a Cisco ASA 5505 connected directly to Verizon FiOS Circuit (ONT) box using Ethernet cable. As per the existing documention that I have, the previous configured this as a dedicated router to establish a seperate VPN connection our software provider. They assigned both Public Static and Local Static IP address. When I try to ping the public IP address, it says request time out; so the public IP address is no longer working.
When I ping the local IP address of 192.168.100.11, it responds. The SolarWind tool also shows Always UP signal. How can I login into this router either from remotely or locally to check the configuration, backup and do the fimrware upgrade?
I also tried to connect my laptop directly to the ASA 5505 router LAN port. After 3 minutes, I'm able to connect to Internet without any issues. However I don't know the IP address to use to login.
View 3 Replies
View Related
Mar 14, 2013
I have a Cisco ASA 5510 I am using ASDM 6.1
I have a LAN and a DMZ and an internet connection. I am using one of the internet connection IPs to host a HTTP service on a server in my DMZ. (its the same interface as my internet connenction but a different IP to the one used for internet connectivity)
so say my LAN is 192.168.1.x
and my DMZ is 172.168.1.x
I can access DMZ from Lan and vice versa. when i try to access the public IP (or URL) from a pc in my LAN i get nothing.
I have enabled DNS rewrite (doctoring) but it is still not working. the HTTP service is available from other sites.
View 1 Replies
View Related
Aug 9, 2011
I have a Netgear ProSafe VPN Firewall FVX538. But I also have 10 Public IP Addresses that I will like to setup for three web services. So how do I set this up. With multiple routers. Or can my Netgear FVX538 take multiple Public IP Addresses to the same ports. If not how can setup multiple routers. one being the main one.
View 1 Replies
View Related
Feb 14, 2013
when I try to connect a laptop to the wi fi it won't connect because the connection has changed from home network to public and sometimes unidentified network . I can get it connected by momentarily unplugging the router and rebooting it , then pressing connect button and it will revert to home network and things are ok . It is a netgear DGN1000 and I tried another router same make and model, same problem. I use an ethernet cable on my desktop no problems.there's 3 laptops come in to occasional use and it's happened to them all . My early attempt was microsoft's fix for sticking in public mode . It is windows 7 pro on the laptops , ultimate on desktop?
View 4 Replies
View Related
Mar 26, 2012
setup my Foscam IP cam lastnight on the Wireless network using UnPn and was able to access it fine via the public IP , using another PC on the same network with no issues. However when I tried to access it from work it doesnt connect - Is there a firewall setting that im overlooking?
FYI im using a Netgear CVG824G
View 1 Replies
View Related
Jul 28, 2011
I have a request to establish a site to site VPN with a customer. While collecting the information I give them our local network subnet which is a private subnet (192.168.5.0). They asked me if I could give them a public address instead. They can not work with the 192.168.5 subnet. Is this possible?
My side of the VPN is an ASA 5505 running 8.2(2). The other side i believe is a Checkpoint.
View 5 Replies
View Related
Feb 28, 2011
Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?
View 1 Replies
View Related
Jan 17, 2012
we need to implement a scalable solution where we can provide for each customer it's own public IP so that they can access some content restricted by IP range.the solution consists of a proxy software that will "listen" to multiple IP's, then reroute the HTTP requests and rewrite the URL's to a different format.Anyways, we came to the conclusion that what we need is the following:
- broadband line with a pool of 8 IP's
- a router that can support multiple IP's
- a server
what kind of router or device is required for this kind of configuration. basically the network diagram will be like this:
Internet ----> broadband -------> cable modem ------ > multiple static IP router -------> server NIC
we should be able to add the same above combination once we run out of IP's, another broadband line, another device and server ...
View 3 Replies
View Related
Feb 16, 2012
I have a virtual FreeNAS server running from VMPlayer and I want to allow my friends to connect to my media server from their houses, but I don't want to buy a domain. Is there a way to port them to it when they connect to my Public IP? I am willing to use another program if necessary. I have looked at Filezilla, but have the same issue.
View 4 Replies
View Related
Nov 9, 2012
I got 1 public IP for router and 16 Public IP's for NAT from ISP. Both router IP in one range and the NAT IP's are in different range. I want to use 1 NAT public IP for one of my windows server.Am using cisco 1841 router, in which I ve configured the public IP provided by the ISP for router.
View 10 Replies
View Related
Dec 29, 2011
I am currently experiencing difficulties setting up a Netgear router (WNR834B). The router I had been using previously allowed me to access the internet, but frequently dropped the connection, especially when I connected to it via my laptop. I have the new router set up correctly (I even get a signal from it) but both the desktop computer I set it up through and my laptop cannot access the internet. When I diagnose the connection issue I get the message "The network adapter "Local Area Connection" does not have a valid IP configuration."
View 14 Replies
View Related
Dec 19, 2011
I have a Netgear wnr1000 v3 router. & At about 12:00pm central standard time. It kinda messed up.. This is the Problem.. I have seen this "Local Area Connection" Doesn't have a valid IP configuration. I've browsed and browsed and browsed.. Over and over trying every solution. It's gotten me so frustrated.. I don't want to return the router.. Nothing works for me.
View 2 Replies
View Related
Jan 27, 2013
I couldn't connect wirelessly to my NETGEAR router because of the "DNS server isn't responding" error.I then eventually made the rather dumb mistake of doing a factory reset, so now the router isn't even in range apparently Therefore I connected to the router with a wired connection and after a "Investigate router or broadband modem issues" error I eventually came to the error in the title.Currently I'm connected directly via my virgin modem with a wired connection, so this is my means of creating this thread.
Below is what i got from ipconfig /all using a wired connection to my router.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Userschenupan>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CGPC
Primary Dns Suffix . . . . . . . :
[code]....
View 1 Replies
View Related
Feb 20, 2012
i have a windows 2003 server using it as a proxy server with 2 nics. 192.xxx.xxx.xxx to the LAN and 172.xxx.xxx.xxx to the internet router. although I can browse on the LAN, i cannot ping any public ip. because of that i cannot use my outlook to get my mail.
View 1 Replies
View Related
Dec 14, 2011
Is there a simple way to have a web server have both a static public ip (I have a block of static IP's) and an static private ip (ex 192.168.0.60)? I am running a web project management application....
View 4 Replies
View Related
May 15, 2013
Could I get a validation that this config is correct in that it allows inbound access to the web server and that I should be able to ping it from my inside interface.
I tried to use the example code from Cisco DocID: 115904 for DMZ WebServer, but I found the object NAT parts did not work with my 8.6 IOS so I modified them as shown in my config.Example from 115904 doc.
!!!!
object network WebServerPublic
host 24.25.26.80
object network WebServerPrivate
host 192.168.1.80
nat(dmz,outside) static WebServerPublic service tcp www www ---> this does not code
!!!!
With the below code I do not get a ping reply sourcing from a 10.1.0.X host to 192.168.1.80 web server.And I cannot browse in from the outside to it either.I do see the MAC for 192.168.1.80 in the ASA's arp cache for the dmz interface.The web server is on a VMware ESX environment and I'm not sure it is set up correctly.
!
ASA Version 8.6(1)2
!
hostname A5515
!
interface GigabitEthernet0/0
[code]....
View 4 Replies
View Related
May 24, 2012
I'm having some trouble with my P660RU-T1 configuration. I have recently set up a linux SFTP server at my home and am trying to access it via my public ip (eg 1.1.1.1), the problem is this public IP goes to the router which doesnt pass on the requests to the server.Last summer when i first messed around with this i had no problems with using the public ip to access the server, its only recently.
View 1 Replies
View Related
Jul 5, 2011
The router is 2821 and is setup to perform static NAT from one internal ip address mapping to one external ip address for each of our servers (inside the LAN): [code] Servers all have internal ip addresses and each of them represented to the outside world by their public ip address with above command on the router. Here is the problem.When I'm in a server (for example 192.168.0.210) and try to access other servers by their public ip addresses (i..e. *.*.*.211) the connection fails. However, When i try to access the same server by it's private IP address (i.e. 192.168.0.211) it works!
My issue is i don't want to modify windows host file for a manual mapping (for example mail.mydomian.com goes to 192.168.0.211 rather than *.*.*.211) because we host many domains and just doesn't make sense to do it one by one.So we must be able to access our servers by their public IP addresses in order for us our applications works correctly.
View 10 Replies
View Related
Jan 13, 2011
I have a new (linksys/cisco) RV082 Router that I have just set up and everything is working except that I can't configure it to allow public access to our web server. I have tried configuring port forwarding under the Forwarding and UPnP menus and still no access from the outside. I have tried accessing it from the outside using both the URL and the IP address and still no access. I have checked with my ISP and no ports are being blocked from their end. I can ping my public static IP from the outside with no problem. The documentation that I've found for this router refers to a menu that is different from the menu of this router and refers to an Applications & Gaming menu which isn't there, but it seems like the port forwarding should handle this.
I have a static public IP, a static internal IP for the server. I have set the port forwarding and UpNP to point to the IP of the server using port 80 and a secondary forward to port 8080. There are no issues accessing the website from within the LAN.
View 2 Replies
View Related
