i have 3 laptops, 2 are running vista and 1 with xp, the xp os will not recolonize the wireless network printer while the other 2 computers work fine. I cannot add a printer?
View 2 Replies
I am running a computer with Windows 7 Service pack 1 64 bit OS and I'm trying to install a wireless Canon MX420 printer.My computer is connected to my router through an ethernet cord and I have managed to set up my printer's wifi just fine. It appears connected on the printer's screen and I have disabled all firewalls on my computer yet it still won't detect it.
View 9 Replies View RelatedWe purchased a new printer which is running on a network where one computer is running Windows 7 and the other Windows XP. The printer cable is connected to the Windows 7 computer. The print function works fine on the Windows 7 but doesn't work on Windows XP. Asking me for a "printer name" and I don't know what to put in that option. When I go to printers and faxes I click on each of the options under shared printers and it still asks for "printer name"?
View 1 Replies View RelatedI have a wireless network with an older model HP printer connected to an HP XP desktop computer. I also have an HP laptop running Windows 7. How can I get the printer to work on the laptop?
View 1 Replies View Relatedi am having real issues with my printer, i have a network of 3 computers and it was attached to a printer that worked fine, i then changed the printer for a new one and i am now unable to find this printer on my network. i have installed drivers on the computers. how do i find the printer. the network works fine with everything else.
View 4 Replies View RelatedI have a Samsung SCX-4623FW All-in-One Printer that will not maintain a connection to my wireless router a Linksys WRT160N. Samsung technicians have not been able to assist after multiple calls. They sent me to a printer repair store which reported they had no problem with the printer working on their wireless network. When I used the setup disk initially it would connect the printer to the network and I could print from my laptop wirelessly, but the connection never continued working more than a few hoursThe router has no problems in connecting to 3 different computers.
View 1 Replies View RelatedHad canon pixma mp990 hooked up wireless to a netgear wndr 3700 router for a year without any problems. Started getting print errors when trying to print, so deleted software and reinstalled. Now the mp990 software can not find printer on network and will not finalize installation and download drivers. Printer will find access point on netgear. I'm running window 7 64bit. I'm not very verse at playing with a router.
[code]....
my computer has been playing up the last couple of weeks not finding my network, even though ive had it about a year now without any trouble before. my laptop and iphone still pick up the wifi with no problems.i decided to format the computer as i wanted to do a clean install anyway, which has not made any difference. i have even tried bringing the desktop downstairs now and placed it directly next the the router to see if it would pick it up then, which it hasnt.
i have used an edimax wireless usb receiver ever since the computer was new which worked fine up until now, i also purchased a wireless pci card to see if that worked (wasnt sure if my my edimax usb had broken), which still doesnt work. the drivers for both the pci card and the usb receiver are up to date.i have tried logging into the routers firmware and changed the channel from 'auto' to channels 1-12. with no luck. i have now had to plug my computer into the router via the ethernet port to get the internet working.
i also run ubuntu on a dual boot, which for some reason also doesn't pick up the wireless network. (however my laptop runs ubuntu and does pick up the wifi)
I have a dell, running windows 7. I can see and connect to other networks, just not my work network. I can see my work network and connect to it from other devices. However I can't see it on the dell and I can't manually connect to it.
View 3 Replies View RelatedI have Windows 7 and suddenly my home router isn't showing up on my list of networks.
View 1 Replies View RelatedThere's a Canon LBP 3500 printer on my office network.I don't know its IP.It doesn't show up when I scan the local subnet with nmap.I cannot find the manual (hardcopy or online).It is plugged into the network.It is turned on.I have turned it off and on again.I have tried plugging it into other ports on our switch.
View 1 Replies View Relatedhome network was working fine up until a few days ago. unsure what happened but my Vista laptop no longer can see my desktop, printer and backup F: drive on the network. HOWEVER, desktop can see my laptop.using linksys router WRT54GS with DSL upstairs.vista laptopWin XP desktop downstairs with attached printer and linksys wireless pc card installed Kaspersky antivirus?
View 13 Replies View RelatedI have a Dell Latitude D610 ,and i can't find drivers for Windows 7.
View 7 Replies View RelatedI have a Asus EeePC 701sd and upgraded to Win 7 Ultimate but I couldn't find any driver for the wireless network adapter
View 1 Replies View RelatedI've just bought a WUSB300N Wireless USB Network Adapter and installed it with the Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.
View 5 Replies View RelatedI pressed a button and tried to print off line. I don't know that to do to get it back online
View 1 Replies View RelatedHow can i share a usb printer conected to a windows 7 pc to other computers running windows xp and windows 7?
View 1 Replies View RelatedI just installed Win 7 pro 64 bit on a new computer / hard drive. I can connect to my router which is hardwired to a computer running Win XP Pro 32 bit, but I can't figure out how to connect to my printer which is on that same network. I can access the internet, just not the printer - which is connected via Ethernet to the router.Is is possible that because Win7 is 64bit and the other computers on the network are 32 bit running XPpro - that it won't work? I have another XP pro computer that is connected via wireless that accesses the printer just fine.I have a netgear USB adapter on both the WinXP computer and also the Win7.Win7 is foreign to me. I can't find anywhere where I would 'join' the mshome network. It asks me about them joining ME.
View 10 Replies View RelatedI've got a small wireless home network that currently has 2 computers - my desktop is running XP Pro, and a laptop that my wife uses running XP Home. I've recently bought a new laptop that is running Windows 7, and although it picks up the wireless feature of the network (it has wireless internet access), I can't seem to figure out how to get this new Windows 7 laptop to see the other PCs or the printer connected to my desktop. I've tried a couple of the "how-tos" online, but I must be doing something wrong. getting my Windows 7 box to see the other PCs and printer on my network
View 3 Replies View RelatedI've got a modem which feeds a wireless router; plugged into the router via ethernet cables are my personal computer in my room and an office computer. Connected wirelessly is my kitchen PC. My printer (Canon MX330) is not wireless/bluetooth and is connected via USB to my office computer.
Office / Kitchen Computers: Windows XP My Personal Computer: Windows 7
I'm trying to set up a network/file sharing system, and more importantly, I'm trying to be able to print on a computer other than my office computer.
So here's my situation: up untill last night myWireless Internet was working fine, I came home and it all of a sudden would only connect with limited access? SoNo Internet ect. I left it for the night and wentto sleep, then this morning i come to logon and it wont find networks at all, nothing comes up in network centre and it dosent seem to even be looking for networks?!
View 5 Replies View RelatedI can usually solve most problems given enough time but after 4x hours work I have admitted defeat.I need the Mac Address of my Wireless printer so I can set mac filters for our laptops and printer.The printer is an HP F4500 all in one wireless printer.I managed to find out how to print a configuration page but there is no ip or mac address on it.Tried Ipconfig /all on the laptop and it only lists the ip and Mac address of the netbook.Phoned HP twice. wasted half hour being transferred all over the place then told to check their tech website. Nothing on their website about obtaining mac address naturally
View 8 Replies View RelatedDesktop PC running Windows 7 connected to D-Link DIR-655 via cable.I then have a Laptop also running Windows 7 connected to router wireless.Finally, I have a Brother MFC-490CW printer connected to the network wireless as well.Checked out the router status page - it shows all three devices connected properly.My PC, however cannot find the printer to save its' life; I've tried auto-detecting, entering the IP address; none of this seems to work, the PC just REFUSES to find the printer. If I connect the Printer to the router with a cable - my PC finds it alright.I'll admit - wireless networking is not my forte - and so I'm not sure, but my Laptop is connected to my specific wireless network (by name) while my PC is just showing as connected to "Network"
View 1 Replies View RelatedI just picked up a new Windows 7 laptop for my home. My live in girlfriend has a Vista laptop and we both connect wirelessly to our linksys network. We also have a lexmark printer that is connected wireless as well. The Vista laptop has worked and prints fine with the lexmark. Now I have been trying to connect my new laptop to find the printer but when trying to add a new printer or even trying to add a new device windows 7 never finds the printer. I have installed the drivers from lexmark and have even enabled sharing on the printer properties from within the Vista laptop and still my win7 cannot find anything. What can i do to add this printer?
View 4 Replies View RelatedI have windows 7.
View 2 Replies View Related"Can't find certificate-wireless". I've applied all the suggestions. With and with out Winduh Zero Config and network adapter software. Unchecked 802.1x, changed ecryption types, modem and computer reboots, push little button on back of modem, tried two differnt makes of network adapters, confirmed correct network key typed, etc. All these things in many combinations. Great full signal, no certificate or with software installed no connectivity. Is it time to Ethernet hard wire my network? Is it the Windstream 1704 modem? Studied and tweaked the modem settings a little
View 7 Replies View RelatedMy DIR-615 was working for months but then it unexpectedly stopped. So I tried re-linking, but Windows can't find the certificate to log onto the network. I found the network fine but I can't find anything that lets me input the WEP key.
Perhaps I need to reset it up on the main computer? But I don't know how to find the IP address or the MAC address.
I just got myself a new laptop, and set it up. It is connected to the wireless internet in my home. I then wanted to create a homegroup between the laptop and my desktop, but they can't find each other. Probably because the desktop has a wired connection to the router and the laptop is connected to a wireless access point. The router and the AP are connected to a switch in the middle by cable.
A sketch of the network:
Laptop - - - Wireless Access Point ----- Switch ----- Router ----- Desktop
^ ^ ^ ^
Wireless Wired Wired Wired
They both point to the same gateway and DHCP-server (on 192.168.0.1). And I can ping to that address from both PCs. When I try to ping either of the PCs the pings time out. The subnets are also the same (255.255.255.0) and the IPs are in the same range (192.168.0.114 laptop, 192.168.0.205 desktop).
So I don't really understand what I need to do to be able to access either computer from the other. The weird thing is that Synergy (to use mouse and keyboard over the network) works, just by using the IPs assigned to both PCs.
The acces point is a linksys WAP54g, but I'm unsure of the Router, it has a custom casing from our ISP and hides any clues for identifying the product. I'm going to google a bit so I can add that info later. Both PC's are Windows 7 64 bit. The desktop is Ultimate, the laptop Professional.
months ago, i installed a USB card so that my dvd burner could run at 2.0 or 3.0. it has worked fine. every now and then the card becomes unlodged from inside the computer, and i have to push it back into the slot.Tonight, while the computer was on, i was putting it back in, and it popped all the way out, my computer shut down and when i restarted it, i got the error message "windows did not find properly installed network adapter/ if you have network adapter update/re-install drivers"Only problem i have is when i go to device manager, i see NO network adapter?
View 8 Replies View RelatedThis printer is connected to our schools network...in the lab I'm in, we have different subnet and my tech computer and the lab pcs gets dhcp from router connected to same new network switch as printer. I can ping the printer and pull up menu in browser but cannot print.
View 1 Replies View RelatedI went to Furrynutz link where I never found the direct download lilnk to the widget. I then chatted with a Microsoft representative at the widget page and he linked me to the same Furrynutz's link.
My DIR-825 has the latest firmware, 2.06xx and works flawlessly, even the shareport usb port works without a hitch with a Seagate Expansion 3TB drive connected into it. What I simply would like is the D-Link gadget.
I am using a Compaq laptop, and i have Microsoft Virtual WiFi Miniport Adapter attached to it.I used to be able to connect to a Printer Brother MFC-J430W via wireless and print from it.But recently, when I try to print from it, it says that the printer is offline. I tried restarting my laptop, wireless adapter, and the printer, I also try restarting the spooler service but the attempt was not successful. Try unchecking SNMP and the printer is online but I can't print from it. So, I decided to uninstall the printer and reinstall it again. This is where another problem occurs. When I try reinstalling it, my laptop seems to be unable to find the printer (I have entered the IP address of my Printer but the printer still can't be found). Oh, and by the way, other laptop seems to be able to print a document from that printer.
View 3 Replies View RelatedI just set up a new EA3500. I added my HP Photosmart C4680 printer, however, my computer can not find. In other words, the router could see it to add it, but my computer can not find the printer at the router. MacBook Pro OS 10.6.8
View 3 Replies View Related
