Wired PC Cannot Find Wireless Printer
Mar 17, 2012
Desktop PC running Windows 7 connected to D-Link DIR-655 via cable.I then have a Laptop also running Windows 7 connected to router wireless.Finally, I have a Brother MFC-490CW printer connected to the network wireless as well.Checked out the router status page - it shows all three devices connected properly.My PC, however cannot find the printer to save its' life; I've tried auto-detecting, entering the IP address; none of this seems to work, the PC just REFUSES to find the printer. If I connect the Printer to the router with a cable - my PC finds it alright.I'll admit - wireless networking is not my forte - and so I'm not sure, but my Laptop is connected to my specific wireless network (by name) while my PC is just showing as connected to "Network"
View 1 Replies
ADVERTISEMENT
Feb 27, 2012
I can usually solve most problems given enough time but after 4x hours work I have admitted defeat.I need the Mac Address of my Wireless printer so I can set mac filters for our laptops and printer.The printer is an HP F4500 all in one wireless printer.I managed to find out how to print a configuration page but there is no ip or mac address on it.Tried Ipconfig /all on the laptop and it only lists the ip and Mac address of the netbook.Phoned HP twice. wasted half hour being transferred all over the place then told to check their tech website. Nothing on their website about obtaining mac address naturally
View 8 Replies
View Related
Aug 26, 2011
I just picked up a new Windows 7 laptop for my home. My live in girlfriend has a Vista laptop and we both connect wirelessly to our linksys network. We also have a lexmark printer that is connected wireless as well. The Vista laptop has worked and prints fine with the lexmark. Now I have been trying to connect my new laptop to find the printer but when trying to add a new printer or even trying to add a new device windows 7 never finds the printer. I have installed the drivers from lexmark and have even enabled sharing on the printer properties from within the Vista laptop and still my win7 cannot find anything. What can i do to add this printer?
View 4 Replies
View Related
Jan 5, 2012
I am running a computer with Windows 7 Service pack 1 64 bit OS and I'm trying to install a wireless Canon MX420 printer.My computer is connected to my router through an ethernet cord and I have managed to set up my printer's wifi just fine. It appears connected on the printer's screen and I have disabled all firewalls on my computer yet it still won't detect it.
View 9 Replies
View Related
Feb 15, 2011
i have 3 laptops, 2 are running vista and 1 with xp, the xp os will not recolonize the wireless network printer while the other 2 computers work fine. I cannot add a printer?
View 2 Replies
View Related
Jul 29, 2012
I've got a Brother 5490CN network printer. For the past year, it has been sitting next to my router and plugged directly in. Due to changes in how my service enters my home, the router needed to move to another location - a location that is inappropriate for the printer.
View 4 Replies
View Related
Mar 3, 2013
I was wondering if there was a way to connect a wired printer to my linksys E3000? or am I still stuck with using my spare desktop.
View 4 Replies
View Related
Aug 15, 2012
I am using a Compaq laptop, and i have Microsoft Virtual WiFi Miniport Adapter attached to it.I used to be able to connect to a Printer Brother MFC-J430W via wireless and print from it.But recently, when I try to print from it, it says that the printer is offline. I tried restarting my laptop, wireless adapter, and the printer, I also try restarting the spooler service but the attempt was not successful. Try unchecking SNMP and the printer is online but I can't print from it. So, I decided to uninstall the printer and reinstall it again. This is where another problem occurs. When I try reinstalling it, my laptop seems to be unable to find the printer (I have entered the IP address of my Printer but the printer still can't be found). Oh, and by the way, other laptop seems to be able to print a document from that printer.
View 3 Replies
View Related
Sep 1, 2012
I just set up a new EA3500. I added my HP Photosmart C4680 printer, however, my computer can not find. In other words, the router could see it to add it, but my computer can not find the printer at the router. MacBook Pro OS 10.6.8
View 3 Replies
View Related
Nov 10, 2011
My printer (HP7210) is wired connected to my WRT54GL router. 2 computers have also a wired connection, my laptop is connected wireless. All these computers use the connected printer. 2 computers can only use a static IP-address for the printer. How can I set a static IP address in my router?
View 3 Replies
View Related
Sep 5, 2011
I have a Dell Inspiron 1720 (running Vista Home Premium) that connects to my Linksys E2000 and to a wireless printer, the Canon MX870. It's been working for months without problems.
I just got a Toshiba Satellite P770-BT4G22 Laptop (running Window 7 Professional 64 bit) and installed the Cisco Connect software following the instructions where you have already set up the router and just need to install the software to do things like add a device. I can connect to the router fine using a web browser or the Cisco Connect Software and my Toshiba connects to the Internet through the router without problems.
The problem is Cisco Connect says it can't find a wireless printer when I run it on my new Toshiba. I've put the printer within 3 feet of the router with my Toshiba in between but still it can't find it. My Dell in another room connects to the printer no problem. And I can print to the Canon if I select the Shared Canon Printer ( on the Dell) using the Toshiba's Control Panel Add Printer function. But obviously that means the Dell has to be on so that's not good for much more than troubleshooting. I've also wired a connection from the printer to the Toshiba and downloaded the latest driver, printed that way so I know that's not the problem. The problem is that Cisco Connect can't find the printer. It says there are 6 devices attached to my router so it's seeing something, but I guess not the printer. I've turned any firewalls off for this testing too.
I'm stumped as to why it can't find the printer when the Dell did and they are all on the same network. Unless it's not compatible with 64 bit Windows.
View 7 Replies
View Related
Aug 4, 2011
We purchased a new printer which is running on a network where one computer is running Windows 7 and the other Windows XP. The printer cable is connected to the Windows 7 computer. The print function works fine on the Windows 7 but doesn't work on Windows XP. Asking me for a "printer name" and I don't know what to put in that option. When I go to printers and faxes I click on each of the options under shared printers and it still asks for "printer name"?
View 1 Replies
View Related
Mar 11, 2012
Unable to find the printer I am sharing on wifi on my home network !!
View 4 Replies
View Related
Jan 1, 2013
I'm trying to add a printer back to my laptop. I've had to do this several times because our internet drops a lot.This time for some reason I can't add the wireless printer back to my laptop. When I add the printer it finds it but then it can't establish the tcp/ip connection.My workstation at the house can print to the wireless printer with no problem.
View 2 Replies
View Related
May 25, 2012
I have a new Cisco router for my mac. I have wireless connection and a wireless HP Photosmart 4780 printer that no longer communicates with the router
View 1 Replies
View Related
Jul 6, 2012
I can't find my WEP key to set up my wireless printer.
View 1 Replies
View Related
Jul 16, 2012
How to find ip address on my hp photosmart printer
View 1 Replies
View Related
Mar 12, 2012
is it possible to connect between 2 networks (different ips)? i have a wired ethernet group n a wireless group, my printer is on the wired group, my laptop on the wireless one.
View 1 Replies
View Related
Jan 2, 2012
Just upgrade from an old DIR-524 (or something like that) to a DIR-655. Set up was easy all is working good with the computers. |However, I plugged my HP Photosmart C5100 printer into the router (first slot). The computer seems to know it is there, and the printer seems to recognize the router, but it will not printer. Microsoft diagnostics says that the printer is not ON, and the printer is listed on Devices as Offline. The printer is about 5 years old, but it is a trooper and I don't want to to get rid of it.
View 7 Replies
View Related
Sep 5, 2012
How to find the correct port a printer is connected on using just the IP address on a CISCO WS-C4006/CAT IOS.
View 1 Replies
View Related
Jul 12, 2011
I'm trying to wirelessly connect my HP Photosmart printer series C4780 to my mac osx even though I have the disc it is now asking me for the ip address, this doesn't seem to be anywhere on the device.
View 1 Replies
View Related
Jan 23, 2012
i am having real issues with my printer, i have a network of 3 computers and it was attached to a printer that worked fine, i then changed the printer for a new one and i am now unable to find this printer on my network. i have installed drivers on the computers. how do i find the printer. the network works fine with everything else.
View 4 Replies
View Related
Apr 4, 2012
I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies
View Related
Feb 19, 2011
Is it possible toconnect a wired printer to the router and have it become a part of the network?
View 6 Replies
View Related
Aug 3, 2011
Had canon pixma mp990 hooked up wireless to a netgear wndr 3700 router for a year without any problems. Started getting print errors when trying to print, so deleted software and reinstalled. Now the mp990 software can not find printer on network and will not finalize installation and download drivers. Printer will find access point on netgear. I'm running window 7 64bit. I'm not very verse at playing with a router.
[code]....
View 1 Replies
View Related
May 21, 2012
I HAVE AN EPSON SX435W WITHOUT THE DISC. EVERY TIME I DOWNLOAD SOFTWARE. MY PRINTER SAYS IT CANNOT FIND THE PC. WHY?
View 1 Replies
View Related
Mar 3, 2012
My buddy just purchased a Sharp AR-M450 multifunction printer for his small business and it has the optional network card. He wants to take advantage of the network printing capabilities but we want to avoid having to run an ethernet cable from the printer to the wireless router. The entire network is wireless because running cables would be a huge pain in the building he is in. What could we use to connect the printer to the network without running cables?
View 1 Replies
View Related
Apr 7, 2012
I have an Epson Stylus D88 printer connected by USB to my Windows XP desktop that is connected to my router by an ethernet cable.
I would like to print through that printer from my Win7 laptop wirelessly, but when I follow the "add printer" steps I get told; "Windows can't find a driver for EPSON Stylus D88 Series on the network. To locate one manually, click OK. Otherwise, click Cancel and consult your network administrator or the printer manufacturer's website."
View 4 Replies
View Related
Dec 18, 2010
I recently purchased a DIR-655 and everything's working fine -- Internet access, visibility of local shares, etc. -- with the one except accessing to my printer (Brother MFC-7440N) that's hard-wired to a port on the router.After installing the latest PC SharePort Utility on my two Windows 7 desktops, they're both able to connect and use all of the features of the printer (print, scan, etc.). However, I can't say the same for my two Macbook Pro's connected via WiFi (802.11N). I installed the latest Mac SharePort Utility on both, but neither can "see" the printer. Caveat: If I connect the laptops via a LAN cable (ie. hard-wired directly into the router), they're able to see the printer. how to configure the router (or Mac) to allow them to see the printer?
View 9 Replies
View Related
Dec 13, 2011
i need the address of my pro 900 series printer to install the program for my Sony note pad
View 2 Replies
View Related
May 10, 2011
There's a Canon LBP 3500 printer on my office network.I don't know its IP.It doesn't show up when I scan the local subnet with nmap.I cannot find the manual (hardcopy or online).It is plugged into the network.It is turned on.I have turned it off and on again.I have tried plugging it into other ports on our switch.
View 1 Replies
View Related
Oct 13, 2011
Trying to print from a Dimension E521 using Dell AIO Center to a hard-wired networked 962 printer hosted on an Inspirion 530 using a LinkSys WRT54G V8 router. Cannot scan or fax from the Dimension via the network. During software install, the printer is not automatically detected on the network and it has to be manually assigned. Attempt to print test page via the network during software install results in a document in the print queue that hangs the printer with a print error. After the aborted test page, nothing works.
Using the VISTA Control Panel can successfully set up the printer and can print a test page to it. In this case, the printer install CAN see the printer on the network, so I don't think it is a network issue.
However, if the control panel is used to install the printer, the AIO center cannot find it at all and displays an error that software and drivers are not installed. Yes, Network and Sharing are all set up correctly and, no, the Firewall is not the problem as it is turned off on both machines.
Drivers are not the issue. I have deleted the drivers and reinstalled them so many times in the last week I can do it in my sleep.
View 4 Replies
View Related
Apr 6, 2012
have a HP 6500a All In One Printer in the network with a BERSR41 V3 router. I am using a Imac with this sytem for printing and scanning. For some reason I keep loosing the printer when I try to scan? I have it set to a static IP, and can not ping it, but can access the printer throught the network with the HP Utility. Am I missing something in setup on the router that causes it to keep loosing connection?
View 2 Replies
View Related
