Access Internet From Remote IP Address?
Mar 29, 2013
I need to setup a system where my staff can access the internet using the IP address at my buisness. IE. My staff can log into our marketing software (which will only allow access from my buisnesses IP address) from home. My thoughts were to leave the computer on at work all the time and then use a remote access program like logmein to remotley control that computer however I am then limited by only having one person able to do this at a time. I want to be able to use my buisness internet connection as a proxy as such....i think? Computers are running windows 7. Buisnesses internet connection is DSL with wireless modem
View 3 Replies
ADVERTISEMENT
Mar 17, 2013
Is the following sysntax correct in removing a remote access vpn address pool and inserting a new one on an ASA5510?
(config)# NO ip local pool BWCVPN 192.168.200.1-192.168.200.128
(config)# ip local pool BWCVPN 192.168.300.1-192.168.300.128
(confif)# tunnel-group BWCVPN ciscovpn general-attributes
(config-general)# address-pool BWCVPN
View 5 Replies
View Related
Sep 15, 2011
At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this: [code] I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configuration on Internal Users.so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN.
View 2 Replies
View Related
Sep 7, 2011
I'm trying to achieve framed-ip-address/static ip address for some remote access vpn clients and ip allocation from pool dynamically for remaining remote access vpn clients. I've configured my asa [URL].
I'm using local database for user authentication. Remote users can connect and always gets IP address from pool only and never gets the framed-ip I configured for those particular users.
View 3 Replies
View Related
May 23, 2013
I've got a Cisco 1941 setup working fine for Cisco Anyconnect. Clients can connect to local resources fine. The issue I have is I need the remote clients to access a third party IP address but to do so they must do it through the VPN. At the moment only local resources are accessed across the vpn and if they need internet they use their own internet connection they are connecting with.I've added the below to make sure traffic going to the IP is going across the VPN.
View 4 Replies
View Related
Sep 17, 2011
At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I dont't know how to do it.
I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:
Step 1Add a static IP attribute to internal user attribute dictionary:
Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.
Step 3Click Create.
Step 4Add static IP attribute.
Step 5Select Users and Identity Stores > Internal Identity Stores > Users.
Step 6Click Create.
Step 7Edit the static IP attribute of the user.
I just do it,but it's not work.When I use EasyVPN client to connect ASA 5520,user could success to authentication but will not get the static IP address which I configure on Internal Users,so the tunnel set up failed.I try to Configure a IP pool on ASA for ACS users get IP address,and use EasyVPN client to connect ASA , everything is OK,user authenticate successed.but when I kill IP pool coufigurations and use the "add a static IP address to user "configurations,EzVPN are failed. how to use ACS 5.2 to create a static ip address user for remote access VPN?
View 7 Replies
View Related
Dec 6, 2011
Is there anyway that I can access Remote access my computers via the internet browser.
View 4 Replies
View Related
Feb 2, 2012
I have configured ASA 5505 for remote access VPN to allow remote user to connect to the officce LAN from remote locations. VPN working fine, users can access offce LAN and sahred resource etc but once they connected to VPN, they can not browse the internet ? Internet browsing stop working as soon as their VPN client connnect with ASA 5505 t, once they are disconnected from the VPN , again they can browse the internet.
Does ASA 5505 blocks the internet browsing for VPN users ? Is there anything else I need to congfure to make sure VPN users can browse internet? Do I need to configure Split Tunnleing , NATing or routing for the VPN users?
View 3 Replies
View Related
Feb 23, 2012
I have setup a site-to-site VPN tunnel between 2 sites using CISCO rv120w.Everything works fine; any PC on one site can access all systems on the other site and vice-versa.The issue I have is when I start a VPN connection another site on Internet using IPSecuritas.I can initiate a VPN to site 1 and site 2; but when connected, I can only access servers that are located into the same site I'm connected to; I cannot ping the remote site.The Range of IP addresses on the internet during my tests is 192.168.11.0 (I 'm using a Mac)
-Systems with IP 192.168.1.1 and 192.168.10.1 are bridges
-Systems with IP 192.168.1.2 and 192.168.10.2 are CISCO rv120w
View 4 Replies
View Related
Jun 23, 2011
I have a remote VPN with split tunnelling enabled. Currently, users connected to this VPN browses internet with his/her internet connection. Now, my requirement is that a roaming user connecting to the vpn must use our company's internet connection for his browsing purposes. How can I do this?Equipment we are using: ASA 5510
View 3 Replies
View Related
Sep 26, 2012
i have a laptop running windows xp sp2, i do PLC programming and often need to put an IP address into my pc, but i also often need to go on the internet,is there any way i can put an ip address in my laptop and also access the internet at the same time.I dont want to have to take out my IP address all the time to go on the internet.can i assign like a gateway or something?
View 4 Replies
View Related
Mar 28, 2010
I have successfully setup the AnyConnect VPN (connecting to our ASA5510) and have split tunneling configured. My remote users can access inside LAN servers as well as the Internet from their remote location. What I would like to know is is it possible to change the split tunnel and not allow access to the Internet from the remote location but force the remote client to go through the VPN and out our internal edge firewall to the Internet? Basically I need my remote clients to access the Internet but I would like for their Internet traffic to go through the VPN and out our edge firewall. This will allow the same security as if they were sitting in the office.
View 4 Replies
View Related
Sep 28, 2011
Have a problem with a laptop connecting to a Wireless Router. The laptop was working fine on the last router which was on an ADSL Network.. (not that that matters),When the new router (Virgin Media / Cable) was installed all other laptops where connecting to it without any probs, but not this one.The laptop in question still receives an IP address, Subnet mask and Gateway from the router - Vista says Local only, no internet access. It cannot ping anything else on the network either. When I do ping it comes back destination host unreachable.
View 6 Replies
View Related
Mar 14, 2013
I have a Cisco ASA 5510 I am using ASDM 6.1
I have a LAN and a DMZ and an internet connection. I am using one of the internet connection IPs to host a HTTP service on a server in my DMZ. (its the same interface as my internet connenction but a different IP to the one used for internet connectivity)
so say my LAN is 192.168.1.x
and my DMZ is 172.168.1.x
I can access DMZ from Lan and vice versa. when i try to access the public IP (or URL) from a pc in my LAN i get nothing.
I have enabled DNS rewrite (doctoring) but it is still not working. the HTTP service is available from other sites.
View 1 Replies
View Related
May 25, 2013
I have 5508 controller in my lab. I am working on a project to set up a public internet but with some condition.
- User should able to connect to the SSID without any authentication.
- Once user will connec to the SSID it should redirect to an external URL which indicates terms and condition and email address field.
- User should enter his/her email address in email addrss filed and click I accept button.
- Once that is done then he/she is allowed to access internet.
We are not sure how can we achive this as I do not know what should be the return value for WLC to allow that user to go through or what should be the settings on the WLC to redirect to the page.
I have seen a settings on web authentication for external URL but I guess it is only for username passwor or Radius authentication. While in this case I do not want to use any authentication just an accept buttor or Decline button and all good to go.
View 2 Replies
View Related
Sep 3, 2011
I'm running a Winsock server on my machine, and I want to be able to connect a client (on an external/remote) network. I know that there are two IP addresses: The WAN IP which is what your IP address looks like while connecting to the internet. There is also an IP address assigned to you by your router. If both machines are on the same network, then I am able to make the client connect to the server by providing the Router-IP. But when they are on different networks, they do not connect even when i give the WAN IP. How exactly do I specify an address for a remote device ?
View 1 Replies
View Related
Feb 8, 2012
How can I find the name of a remote unix server if the client can only provide me the ip address which they use to connect?
View 5 Replies
View Related
Feb 24, 2013
How do I do a remote backup to an IP address? I am using NAT.I will be using port forwarding.I am using the windows "Add Network Location" wizard.I typed in my router's IP address, and it doesn't like it.I would like to run a backup by selecting the destination as this network location, if possible.
View 1 Replies
View Related
May 23, 2011
How to remotely changing ip address for my ASA5505.
View 1 Replies
View Related
Mar 17, 2011
I have DHCP server running in windows 2003. Presently its unable to provide Ip address for VPN clients who connect remotely. What I should do / reconfigure in DHCP, so that the DHCP server provides address for VPN clients.
View 4 Replies
View Related
Apr 5, 2011
can i have 2 pools each with diifferent subnet [code] i wanna put restricution on remote vpn users having address from pool-2,and just give them access to 172.16.10.0/24,is it possible on the asa 5510?
View 7 Replies
View Related
Mar 5, 2013
I've been using an ASA 5505 -- ASA 9.1(1) -- with an IPSec Remote Access VPN. Everything works properly, though I recently noticed that when my IPSec session is disconnected, I get the standard message ID 113019, but within that message the Peer IP address is incorrect. In fact, it isn't even close to my actual remote address. [code]
When I first researched the IP, I found it coming from China, which freaked me out. I changed settings, rolled back to 9.0(1), and nothing worked. Finally I rebooted, reconnected the VPN, and the IP changed. This time it was an address from RIPE NIC. I rebooted again, now an address from ARIN in the USA. One more reboot, now a random Comcast residential address.
Within that boot cycle, the peer address always stays the same. I've connected from different devices, different IPs, different ISPs - nothing matters. Additionally, there are no firewall logs for these IP addresses at all.
ASA Remote Access VPN peer addresses in disconnect message are incorrect and change at reboot.
View 3 Replies
View Related
Aug 4, 2012
I have site to site vpn between cisco asa and cisco 2911 router.asa is static ip and cisco 2911 side is dynamic ip. my site to site vpn is working fine. I am just trying to make PAT over the vpn means i want forward one ip in my public pool to one of my local ip in the cisco 2911 side.
View 2 Replies
View Related
Mar 3, 2013
I have a RV120W; configured to perform port forwarding. I have Configured a Port Forwarding and Access Rule
* Sample Firewall: Access Rules:
Action | Service | Status | Connection Type | Source IP | Destination IP
[Code]....
Everything works, but in my destination server, i see as remote address the IP for the RV120W. I want it to forward also the originating IP address of the client (the remote address)
Is it possible to configure this?
I have also configured DMZ for my server, but see same behaviour
Firmware: 1.0.3.10
View 3 Replies
View Related
Aug 8, 2011
i am just installing my ASA 5510 and i want to configure it for remote access VPN IPSEC client.i use this doc : URl,When i start the connexion, the Client uses the first address of the pool and not the dedicated address ?,i have forget something ?
View 2 Replies
View Related
Aug 13, 2011
i am trying to configure static ip on remote client user side , i am using the following doc as an example but i am not getting the ip which i am mentiong in the user .[url]...
View 10 Replies
View Related
Jun 2, 2013
We have a 5508 with 7.4.100.0 vor Internal APs and OEAPs. till now every thing is ok. Now we have to connect an AP (local) in a remote office, connected to the WLC by a VPN Tunnel. The problem is that the AP in the remote office uses the NAT Address to connect to the WLC, so the traffic goes over the Internet, not trough the VPN Tunnel. On the controller I have the following setting:
AP Discovery - NAT IP Only ................. Disabled
On the AP:
AP Link Latency.................................. Disabled
How to force the AP to use the internal IP Address of the WLC?
View 7 Replies
View Related
Apr 20, 2011
i have a new smc router and my local ip address and remote ip addresses are very similar. The remote ip address is updating my dns server but i am unable to ping it. Its something like 122.61.xxx.1 ?
View 8 Replies
View Related
Feb 12, 2013
Im facing with some DHCP lease issue and its like this,Our Cisco 2951 edge router is configured with local dhcp pool for a set of remote users when they connect through Cisco VPN which was working fine until we planned to change it to a Windows box that is configured for DHCP.The basic idea now is to relay the DHCP requests that are coming from the remote clients through Cisco VPN to the DHCP Windows server. So we added the scope on the server and changed the client config on the router as follows (highlighted is the dhcp relay config). [code]
View 1 Replies
View Related
May 7, 2012
I have created remote access vpn in my ASA 5505. The tunnel is established but i am not able to access the internal network.
View 3 Replies
View Related
Aug 16, 2012
Im currently connected to a remote acess vpn setup using the vpn client and am unable to get anywhere around my network, this normalyl works fine The only difference i can see is that the are multiple virtualaccess interfaces pointing to my public ip address, which im presuming is causing routing issues How can i clear these unsed virtual access lines and how can i make it forget them automatically after disconnects?
View 5 Replies
View Related
May 17, 2011
We have an ASA5510 and a few days ago we were unable to access some segments from remote access VPN, the problem was not the config. A few hours later the problem was resolved on its own and I suspect we have an IOS bug. This has happened a few times in the past and its becoming an issue. How can this be confirmed and which IOS should we upgrade to? Prefer not 8.3 given the syntax difference
View 1 Replies
View Related
May 31, 2013
Is there any way to Mirror a CISCO C3750 Switch Port Taffic to a remote Host IP Address?I know Port Mirror (SPAN/RSPAN) can copy one Interface Packet to another Interface. But I am looking for a way to miror Switch Port Packets to a remote Host (having Public IP Address and running Wirehark). Is it possible?
View 9 Replies
View Related
