Trying to get an HTPC to connect to mobile phone to use phone as a remote. The pc is XP sp3, phone is HTC EVO 3d running smart pc remote lite, wireless adapter is an Airlink AWLL6075. I think the problem throwing me off is all of the guides I'm reading assume that I am sharing an internet connection. This PC is not internet connected. What I want it to do is broadcast its own Wi-Fi connection so that my phone can connect to it and be used as a remote control. How do I set this up?
I successfully installed the AirLink101 AWLL6075 Adapter, however it cannot find networks because the Wireless Monitor section is always checked as being "Disabled". When I uncheck the box, a few seconds later it comes right back to Disabled with the check mark again.
I've seen loads of people connecting 2 routers, but they're usually connecting the routers together (as in connecting 1 router to another, which is connected to both the internet and the PC) to boost the performance of the current router, or connect more devices. What seems to be hard to find is what I want to do.
The situation is, I have a Sky Broadband Router (a specialised Sagem router from Sky Broadband ISP) in the back room of my house, and it's wireless range can't reach the front room of my house (where I want to use my wireless laptop). Moving the router is not an option, so I purchased a Belkin 300N Router and plugged it into another phone socket at the front of the house (the phone line was originally just at the front of the house, but was extended to another socket at the back of the house, the one the Sky Router is connected to).
The router is working, but seems to be clashing with the Sky Router, it can't connect unless I turn the Sky Router off, and the Sky router always overrides the Belkin one. I've seen some posts about syncing routers when they're connected, but these aren't, they're just on the same phone line, how to stop them clashing?
I got told if I changed the IP address of the Belkin Router to one similar to the Sky one, and disabled DCHP it would work, but this just messed the Belkin Router up and I had to give it a factory reset!
I have a phone jack in my computer. i want to connect to the internet on it. I have an arris modem that supports the Internet phone but it has Ethernet port too can i just use the telephone port on the modem to connect to the inet?
I have bought Cisco WAG120N modem+router weeks ago, and until now I have trouble with connecting it to my android phone with wi-fi, every time I try to do it keep trying to connect and after that I get a massage connection lost in my PC, then I have to restart modem-router agin to get the internet connection,
previously I had my ISP provided unbranded one and it worked fine, since Cisco have good name I bought this and now I was totally disappointed,
even the Internet connection stop without any reason and I have to do restart process.
Is it possible to integrate a wireless voip cisco 7921g (sccp protocol) with an small business modem router Srp527w (sip protocol), even if if is by connecting another device (like an access point) between both? I know skiny is cisco property and sip is an open source protocol, so I do not understand why cisco does not implement the skinny protocol in his Srp527w.
I have a home network using WEP 128-bit router and my phone is Motorola Atrix with AT&T. until I did the jellybean update to android my phone connected automatically with my home wifi but now it won't connect at all. In all other placed with wifi or hotspots it connects automatically and even with secure networks it saves the password and stays connected. I tried my local AT&T store and they said all my settings in the phone were right and suggested I reboot my router which I did. Nothing has corrected the problem. The wifi doesn't stay on long enough for me to put in my password to connect.
I want to do this connection:-DSL cable--> Modem --> Wireless Router --> use WiFi on my mobile.Is it okay or I need a PC in between????? I don't have PC with WiFi Connectivity.....
I received my upgrade yday from shop. I'm using galaxy 11s but have now galaxy 111 x my 11s is still connected to fone as hubby got it but I can't get wifi on new fone x iv sky broadband. does it take 24 hrs or what's wrong.
I'm new to networking and was looking for some assistance. First off im using packet tracer to diagram my senario as I will be receiving my equipment next week to deploy.
Hardware to be used:
1. 2 catalyst 3560 switches 2. all connect to a sonic wall router
I have two companies that work in the same office space. I need to keep these companies seperate on their own vlan. They will however need to share the phone system.(Packet tracer file uploaded to give those who have the time to see what I put together.) [code]
I am trying to connect to my office wifi which uses a proxy server. Scenario 1: I am using Samsung Bada (wave 1), connected to the internet successfully and also any applications that require an internet connection including Samsung's app store. While, connecting via open networks like home wifi and other friends' wifi also worked without any issue. Scenario 2: Now I also have an android based Galaxy pocket: even after entering all the required proxy setting as mentioned above, I can access websites via browser but cannot access samsung's app store, google's play store, skype, sipdroid etc. I know it is nothing to do with the network administration as I am still accessing via my samsung wave but not via android. Is there anything like a network profile I need to assign for these applications?
I need to connect my laptop with android phone thru Wi-Fi. I have created ad hoc WEP connection in my laptop. Now, the signal strength in my laptop Wi-Fi shows "no signal". Therefore , my phone is not detecting the ad hoc connection which I have created.
My laptop has recently not been able to connect to the internet through my wifi connection. My desktop is fine though it can connect to the internet on the same network, and I have my wireless router connected to my desktop. I thought it was just my laptop having a problem (possibly a virus) but then I noticed that my smartphone is having the same problem of being able to connect to the network but not connecting to the internet.So is there something up with my router?
I am using the HTC One S and a Linksys WRT54GL router and I find that I become out of range once I leave the room with the router. I am wondering if there is some sort of setting that I need to change on the HTC One S or Linksys WRT54GL to make the signal stronger?
My brother owns a Moto Razr, dad has HTC Desire C, friends have iPhone, S3, Nexus 3... all do not have any problems with our wifi connection anywhere in our house. In addition, I'm able to bring my 8 year old laptop across the street and use our wifi on our neighbour's lawn.
I have recently been experiencing a problem. This started to occur after I had gotten new internet service and a new router. I now have comcast, and a new NetGear router. I also have a VOIP phone connected to the router call "AllVoi". Now, whenever I use this phone, all connections on WiFi go down as I am using it. While, when I am using any ethernet connections dirctly from the router, it works fine. It becomes a large problem when you are watching a video or something from a laptop WiFi connection.
I have a wifi connection in my shared accommodation which I use to connect to my Laptop. Now that I have bought a new smart phone, I want to use this wifi with my phone as well. I have a Sony Xperia Neo mobile phone. When I entered the password in phone it said limited connectivity and was not allowing to open the webpages. So what I did was took all the settings of the Wifi like IP address, subnet mask, default gateway, dns 1 and dns 2, manually entered all these in the advanced setting. Now the phone is saying you are connected to the Wifi, But I am not able to open any webpages.
