Connect To A Router That Requires A Password?
Apr 6, 2012
I have a Cisco Valet wifi router that works fine with my laptop and my computer that has a usb wifi adapter. The problem is that for some reason when I try to connect my moms computer to the router it can only connect to the guest router and when I try to connect to the regular router it just fails even when I use the correct password. I have tried uninstalling the driver and re-installing it for the usb wifi adapter for my moms computer (NetGear N150 USB Adapter) and its nothing works. Her computer by the way is an Acer Windows XP SP3 machine.
View 4 Replies
ADVERTISEMENT
Aug 2, 2011
My storage link drive is accessible from my lan requireing a userid and password, but it can be accessed from outside my lan through ftp without userid and password. how do I change it so it requires a password from outside my lan when accessed as an ftp drive? I have the WRT350N
View 1 Replies
View Related
Oct 29, 2011
I just bought a Westell modem 6100 model online, and when I try to change the profile, I get a message saying: The server 192.168.1.1:80 requires a username and password. The server says: Modem Secure."
View 12 Replies
View Related
Oct 29, 2011
I just bought a Westell modem 6100 model online, and when I try to change the profile, I get a message saying: The server 192.168.1.1:80 requires a username and password. The server says: Modem Secure."
View 1 Replies
View Related
Jul 28, 2011
I was excited to learn that USB printer support was added to the E4200. I'm disappointed to find that the USB printer option that is available in firmware version 1.0.02 requires Cisco Connect software. There is no version of Cisco Connect for Linux. I was hoping that this would allow the printer to be shared among my Win7 desktop, Win7 laptop, and my Linux desktop running Ubuntu 10.10. No such luck. WIth the printer connected to the router I can print with any one computer. My previous configuration had the printer connected to my WIn7 desktop so that desktop had to be turned-on to print. The bottom line is that I still can't print from the Linux box without turning on the desktop machine. Cisco please provide a way to connect to the printer without using the Connect software! Or provide a java version that can be run on any OS.
View 4 Replies
View Related
Mar 6, 2011
I understand ip addressing and what a subnet is.But why is it sometimes I connect two things together,it always requires a subnet mask, and other times no? For example when I try to connect two computers together, it requires both IP and subnet mask.But if I use FTP software all it ask for is IP.Same thing when connecting to a website through their ip, doesn't require subnet.
View 6 Replies
View Related
Mar 22, 2011
I've just gotten a DIR-615 and replaced a working linksys G router. I configured it to work with my ipad (wireless N), my laptop-win 7 (N), and my desktop-vista (USB connected N). Everything works ok,. I'm using WPA personal, WPA2only, AES encryption, 3600, 802.11n only, auto 20/40 mhz channel width, invisible.
Here's the problem. As I powered up and shut down the laptop each day, it wouldn't connect to the router. I could see the connection, but windows said it couldn't connect. I had to go and unplug the router, count to 10, and then plug it in, and tell the laptop to connect and then it would connect it would be fine.
I thought it might be a compatibility with the laptop driver, but after powering down the desktop today, I had to do the same power cycle on the router to get the desktop to connect. So then I went and turned off the IPAD and had the same thing happen. 3 for 3.
I'm pretty sure its router settings and not the 3 devices, this never happened with the Linksys router, but I don't know what to change.
One other odd thing, when I view the network in windows, the DIR-615 icon is there (for about 15 secs), and then it disappears (for about 5 secs), and then reappears (15 secs), disappears (5 secs), etc. - almost like its dropping out for 5 secs... I haven't noticed a performance hit, but haven't transfer big files yet.
View 14 Replies
View Related
Sep 7, 2012
Lately, I upgrade the firmware on my router. A linksys WRT54G. In order to access the router I had to do a manual reset to factory settings. Post upgrade, for some reason I couldn't access the internet. I tried everything for hours and finally through sheer luck of unplugging every cable and ever power lead and plugging it back in, it started working.
However, lately I've found that the only computer connected to the internet via eathernet cable is loosing connection intermittently. Also we seem to get constant huge spikes in latency and very inconsistent speed. Unplugging the router and plugging it back in again seems to solve this problem temporarily, but requires toggling of power multiple times a day. Also I had what I believe was an IP address conflict, or lack of an IP address once, but using the windows troubleshoot errors fixed that by resetting my wireless network card. (This was on a 2nd machine)
[code]...
View 8 Replies
View Related
Jul 25, 2012
So I have a WRT160N firmware v3.0 wired connection to my PC, and at least once a day my connection speed drops from 2mbs down to almost dial up speeds at 60kps. Just unplugging the router then plugging it back in seems to fix it every time. I've contacted my service provider and they say there's no issue on their end, and since I don't get this problem when I plug the modem directly to the PC I agree with them. I've done a factory reset and that didn't work. I've gone through the FAQ and can't find anything useful in there.
View 7 Replies
View Related
Sep 9, 2011
My ISP here at my mother's in Italy (www.teletu.it) gave me the following configuration:
1. Supported Protocol: PPPoE or PPPoA
2. VPI: 8
3. VCI: 35
4. Encapsulation: LLC (If not supported: VCMUX/NULL)
5. Modulation: Multimode
6. Authentication Protocol: PAP or CHAP
if I connect my laptop to the ADSL modem, it all works just fine and I can connect to the internet (as you can see )
HOWEVER, if I then try to configure my WRT54G v6 to use this internet connection (I NEED to be wireless here, or I won't be able to use my iPhone and iPad), there is no way apparently for me to configure the Encapsulation, Modulation, and Authentication Protocol above. I just upgraded my WRT54G's firmware, and am now running firmware Ver.1.02.8, 10/05/2009. I was hoping this would allow me to set these parameters, but I can't find a way.
I tried just configuring the WRT54G with PPPoE and the ISP's userId/password, but this doesn't seem to suffice, and I don't see any other settings I could try.
View 3 Replies
View Related
Apr 27, 2011
Using Windows 7 and router wont connect to the net..it asks for a key password and when I do that it doesnt connect..I have a good channel ..I had a windows XP on this before and no problem..bought a new computer with windows 7 and cant seem to get the router to connect and pick up the signal
View 1 Replies
View Related
Jan 3, 2011
When trying to connect a laptop to my router it asks for my password. I am sure I am putting in the correct word but every time my connection fails. Is their anyway of checking my password
View 1 Replies
View Related
Jan 16, 2011
I've got a Belkin G wireless router.I've got my Vaio with windows 7 , my other emachines with vista and another acer laptop in the house also on vista/All laptops can connect to the router and internet fine but when I password protect the WI-FI the ACER aspire won't connect to the router, while the other 2 and also a ps3 all connect with the password no problems.
View 1 Replies
View Related
Jan 29, 2013
Cannot connect to Linksys Router 192.168.1.1 Webpage. We are trying to remove the need for a password on the public side.
View 1 Replies
View Related
Jan 1, 2013
I can't be the only one who misplaced their Router's Password - How do I manage to 'connect' my new devices (Kindle Fire and new smart phone) to my router installed less than 2 years ago.
View 1 Replies
View Related
Dec 15, 2012
Trying to connect new iPad with Belkin router but have lost the password.
View 5 Replies
View Related
Apr 20, 2012
My son decided to update our router firmware, together with this the password was changed. My computer which hosts the Internet connection works fine, all other laptops have now been connected successfully after simply changing the password. However my wifes laptop won't play ball. It is a Samsung R510, with Vista Home Premium OS. It worked fine prior to updating the firmware. I have been through the process of changing the password and have the correct security encryption in place, exactly the same process as with the other laptops.
It then says successfully connected, but shows in the bottom right of the screen, Unidentified network access local only and will not connect when the browser is opened. I have tried to diagnose but the usual windows prompt to reboot both modem and router has no effect. I have set it to private, as advised elsewhere, I have switched the firewall off and removed security software, all to no avail.
I tried the command prompt, then ipconfig/renew. An error occurred while renewing interface Wireless Connection: unable to contact your DHCP server. Request has timed out. No operation can be performed on Local Area Connection while it has media disconnected. Let me stress that no changes were made to the laptop at all, it is simply not connecting following the firmware update and password change. All other computers, and phones, 6 in total, are all working fine from simply changing the password.
View 8 Replies
View Related
Jun 29, 2012
I am in the process of upgrading a Linksys WRT160Nv2 to a Cisco E4200. I run Cisco Connect and enter my ISP password (7 characters long) and click save but when it refreshes the screen, the password field has 16 characters in it.
View 4 Replies
View Related
Nov 29, 2009
I have a Linksys WAG200G DSL wireless router and I recently got Network MAgic. When I am trying to connect to change the wireless settings, it always gives me the message that it cannot connect to the router no matter what password I enter! I even used really simple ones such as admin admin and It WONT connect. It gives me the message "Could Not Access Routers Settings". I have the ESET Smart Security AV & Firewall and I have properly configured them to allow communication of Network Magic. I should note that I CAN connect to the router through a browser.
View 4 Replies
View Related
Jul 15, 2011
I have tried to connect my Kindle to my E3000 without success. The Kindle shows that the router is there but after entering my password in the Kindle it will not connect. I tried going into Cisco Connect and enable "Guest" user. Again the Kindle shows that the router is there showing "Guest User" and after entering the password for the guest user it still will not connect. The Kindle does connect to the internet through a router that is shown - I have no idea whose router it is - but at least it proves that the Kindel will connect to the internet.
View 2 Replies
View Related
Jan 1, 2012
new instal will not give me page to enter password
View 1 Replies
View Related
Dec 18, 2010
Alright, the computer I had cisco connect on crashed. I got a new computer and I'm trying to install Cisco connect using the downloaded version and I can't install it because it requests the password of the router, which i do not know. This is because I've lost the CD copy of Cisco connect. I've tried resetting the router itself by pressing the red reset button
View 5 Replies
View Related
Oct 28, 2012
When i try to connect kf to wifi router, I keep getting password error message when I type my network pw. I have no problem connecting to other wifi connections
View 6 Replies
View Related
Mar 21, 2011
I just got Charter cable internet and decided to purchase my own cable modem instead of paying 5 dollars a month to rent one. I got a D-Link DCM-201. I know it is a little old but it was brand new/unused so I figured it would work out well. Ever since we got it hooked up every few hours we lose internet connectivity. The power, cable, and status lights are solid green and the Ethernet light is blinking green. The only fix I have found for this is to power cycle the modem. The problem is this happens about once every 4 hours...having to reset the router every few hours is making having cable internet a much more painful experience than it should be.
View 7 Replies
View Related
Sep 29, 2011
I've been having this issue where my wireless network completely disappears from my computer and it requires a restart to fix.I know for a fact that it is not my modem/ISP as my iPad still connects just fine to the network.My network disappears about after 10-20 minutes of being logged on.
View 1 Replies
View Related
Apr 14, 2011
Shareport recognizes the printer only after resetting the DIR-825 router. I don't know if this is a Shareport issue or an issue with the DIR-825 disabling the USB port.This happens after there is no PC connected to the router for a number of hours such as overnight. I have 1 laptop and 1 desktop running Win 7 64-bit and 1 laptop running Win 7 32-bit. The desktop is connected directly to the router and the laptops connect via wifi. All PCs work perfectly when the DIR-825 is reset.This isn't a big issue but it's extremely annoying and shouldn't happen. I use a Cisco WAG320 in my office that has similar USB functionality and this never happens.
D-Link Router: DIR-825
FW Version: 1.13NA
Operating System: Win 7 32 and 64 bit
SharePort Version: 3.1.0 R1 (SXUPTP Driver : 3.4.6.0)
View 2 Replies
View Related
Feb 22, 2010
DIR-655(A3) 1.33NAb02_HNAP_beta I used to be able to send notifications on log full etc... When my ISP was still allowing outbound email w/opt out of block on port 25. This worked on my old DI-524, and used to work on my DIR-655.In an effort to clamp down on spam my ISP formerly SBC now AT&T began requiring SSL. Secure Authentication is not required. With the ever increasing concern for controlling spam DLink really needs to get in gear and provide the support customers need and back the efforts of ISP's to control spam. Otherwise it's wasted code occupying space. On that note if space is a concern, need space for the code ~ throw SecureSpot out !
[URL]
On the Outgoing Server (SMTP) Settings window click Edit and verify:
# Server Name - displays smtp.att.yahoo.com.
# Port - displays 465.
Note: When updating the secure server settings, check SSL checkbox first to update the port setting.
* Under Outgoing mail (SMTP), the box next to server requires a secure connection (SSL) is checked. This works flawlessly with Thunderbird and other mail clients therefore it is clearly a shortcoming of the firmware on the DIR-655 i.e. no SSL? This is totally inadequate.
View 5 Replies
View Related
May 30, 2011
I have access to free wireless service but it requires a security key? How do I get this key?
View 3 Replies
View Related
Feb 3, 2012
I have a Linksys X3000 router. While it is running, connection latency will gradually increase over about a day until eventually it just stops working at all and I have to power it off and back on again.
Ping times to a local website slowly increase from 30ms immediately after restarting the router, to about 100ms about an hour before it will need to be restarted, then rapidly increase to over 1 second before it drops out completely. When this happens, no connections through the router will work, I cannot even ping it or connect to its configuration web page.
I upgraded the firmware to see if that would work but it didn't. I have had the exact same problems with the 1.0.0 and 1.0.01 versions.
Can I get it replaced? And in the mean time, is there some way to make the router automatically restart at a scheduled time?
View 2 Replies
View Related
Jul 21, 2012
I'm currently trying to setup a Linksys SRW2048 switch.
The switch came with version 1.0.0 of the firmware (circa 2005), which worked fine with Google Chrome and Safari on OSX.
However, I recently upgraded to 1.2.2 (circa 2009), and the in-built web configuration page doesn't seem to work in anything except for IE6 or IE7.
Chrome and Safari give me a whole bunch of resource not available errors, and the page itself doesn't render properly at all:
Firefox also doesn't render it properly either:
It seems a bit strange on Linksys/Cisco's part that they'd release an updated firmware that meant their switch could only be used by Internet Explorer.
Or failing that, are there any known workarounds to get this to work with Chrome, Safari, Firefox - anything other than IE? Or anything on OSX or Linux?
Also, I heard that firmware 1.2.1 still works on non-IE browsers - any archives of older Linksys switch firmwares?
View 2 Replies
View Related
Jun 7, 2013
Have an SRP527W that I've had a couple of years,
Model:SRP527W, ADSL2+ AnnexA, 802.11n ETSI, 2FXS/1FXOVersion ID:V03Hardware Version:4.0.0Boot Version:1.1.17 (Jan 4 2010 - 21:15:46)Firmware Version:1.01.29 (002) Mar 29 2013ADSL Firmware Version:0.78.0Recovery Firmware:1.01.20 (011)Setup Wizard Version:20110728.00
As indicated in the subject, wireless users are finding that it is either unattachable (shows up in the list but fails to attach) or if you manage to authenticate and get in, it's painfully slow or simply drops out. Security is WPA-PSK. Only noticed the issue after a couple of Windows 8 laptops came into the household, but the problem still seems to be there when they are off so not sure if they are connected in some way or not. Updated to the latest firmware - no change. Wired connections are fine and when it's initially restarted, so is the wireless, seems to happen sometime after wireless services are restarted. Only the one Wireless SSID, nothing fancy, max users around 5, all on laptops or the odd pad. I changed channels done narrow wide etc, (using mixed mode - some Wireless N laptops some Wireless B/G. Nothing seems to make any difference. No log entries until the Wireless system is restarted, doesn't require a reboot of the router, just a SUBMIT of the existing wireless settings to force it to restart.
View 8 Replies
View Related
Jul 1, 2012
I use a cisco asa 5520 to terminate multiple site to site VPNs. Due to the configuration of a parteners network, i have had to install 2 routers into this parteners network, i have been supplied static private IP addresses for each router each router has a unidue LAN subnet which is the VPN's protected network.The partener use's PAT with only one public facing IP address.The VPNs are initiated from the parteners network using an IP sla ping.
Upon installing my first VPN router in the partenrs network, once NAT-T was enabled on the local ASA the VPN started working fine. After installing the second VPN router i tried installing the new config on to the ASA but via CSM, the ASA complains that it can not have 2 VPN's with the same peer address configured.
View 3 Replies
View Related
May 7, 2011
I am fairly new to the Cisco world and aim to take my CCNA in the coming months.I am now working with a customer who has several Cisco 857 (UK PPPOA ADSL over POTS)The have sonicwall firewall VPN devices that needs to have one block of 8 static ip addreses from the ISP at each site.The current configurations use the network address on the VLAN interface use Static NAT to a private IP address to connect to port 23 on the VLAN interface. Why would you set up the router this way?,I thought that from a block of 8 IPs the first would be the network address the last the broadcas address, one for the router (on the VLAN interface) leaves 5 usable for the hosts attached to the ethernet ports on the VLAN.
View 2 Replies
View Related
