Access To Free Wireless Service Requires Security Key
May 30, 2011I have access to free wireless service but it requires a security key? How do I get this key?
View 3 Replies
ADVERTISEMENT
Cisco :: MIR Feature On MSE 3350 Requires Context-Aware Service To Work
Oct 21, 2009Does the MIR feature on the MSE 3350 requires the Context-Aware Service to work? I read that the system uses location, signal strength and coverage data in conjunction with monitor mode APs at each exit to trigger the roam. I just don't know if MIR does this on it's own or needs to get location from Context-Aware service.
View 2 Replies View RelatedPublishing A Local Website Using NO-IP (free Service) In CentOS?
Nov 15, 2011I've just registered with NO-IP (free account), created a host, installed the client (in CentOS) and I want to see a website I'm running locally in that computer from another computer (via internet :). How do I access it?My host is "customtrack.no-ip.org "And in that unix box I've got a published website that I can access from any browser in the following URL: [URL]When I log in to from the browser from another computer I get the following error message:
Quote:The connection was reset- The connection to the server was reset while the page was loading.The site could be temporarily unavailable or too busy. Try again in a few moments.If you are unable to load any pages, check your computer's network connection.If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
How do I tell CentOS that I want to redirect that site I'm hosting locally [URL] to [URL]? I believe that's not done automatically. How do I configure the redirection?
Security / Firewalls :: Recommendations For The Free Content Filter That Will Run On XP?
Mar 18, 2013Im currently doing a project, and building a machine/ bastion host with DHCP and a content filter.Its running XP. Any recommendations for the content filter that will run on XP and is also free and popular?
View 1 Replies View RelatedSecurity / Firewalls :: Does ZoneAlarm Free Record The Web Surfing Activity
Jul 25, 2011Does ZoneAlarm's tvDebug log file record the websites I visited? And if so, how do I delete it?
View 3 Replies View RelatedSecurity / Firewalls :: Associated Service Not Running
Nov 30, 2011Windows firewall settings cannot be displayed because the associated service is not running
View 4 Replies View RelatedSecurity / Firewalls :: Best Email Service For Privacy / Daily Usage?
Jun 30, 2011What is the best email service that puts a high priority on privacy yet is still easy to use on a daily basis?
View 2 Replies View RelatedNetwork TCP Connections Attempted By Service Files - Security Risk?
Mar 10, 2012My AV often reports my windows 7 ultimate 64 service files, such as winmon.exe or or service.exe requesting opened TCP connections along with a number of .DLL filkes, and then times they are flagged as heuristic behavior modification, however i know many of those are undeletable, due to windows security replacing them as soon as they are noticed to be missing and in another thread it was also indicated that these must be deleted from three places at once almost to actually prevent those from being instantly replaced, this explains maybe why i get this repeatedly immediately after boot up, but after five or some times it slows down to now and then.still quite a hassle to stop on start up.
View 2 Replies View RelatedCisco Firewall :: 5505 With Security Plus Or 891 Integrated Service Router
Mar 15, 2011Have a customer who has two ISPs right now and only using one through a basic SOHO router. Looking to upgrade to something that supports dual WAN and allows connections from outside in on both WAN ports. There are 25-30 inside hosts.Requirements: Allow incoming connections on BOTH WAN ports to a single inside host
-This is a web app that needs as close to 100% uptime as possible
-Round robin DNS is set up
-Failover for internal people should one of the ISPs go down
Looking at either an ASA 5505 with Security Plus or an 891 Integrated Service Router.
D-Link DIR-615 :: Setup Free Access Point But To Internet Only?
May 24, 2012I have configured my DIR-605L for no security. I want to provide free wireless internet for the guests that come to my house. How do I insure that guests connecting wirelessly to the 605 can access the internet only and can NOT hack into the computers on my internal house network?
[code]....
Cisco Wireless :: WLC 5500 7.4 HTTPS Access On Service Ports Using HA AP SSO
Mar 5, 2013I use the Service port connected to the managementVLAN to manage the WLCs. When configuring HA with AP SSO, I lost HTTPS connectivity to the WLC, telnet still works fine.I researched the deployment guide and it states:
- When AP SSO is enabled, there is no SNMP/GUI access on the service port for both the WLCs in the HA setup.Why is remote access disabled using GUI when using HA, and how can I keep management of my WLC using HTTPS and an address in the ManagementVLAN.
Cisco Wireless :: SRP527W LAN Requires Frequent Restarts?
Jun 7, 2013Have an SRP527W that I've had a couple of years,
Model:SRP527W, ADSL2+ AnnexA, 802.11n ETSI, 2FXS/1FXOVersion ID:V03Hardware Version:4.0.0Boot Version:1.1.17 (Jan 4 2010 - 21:15:46)Firmware Version:1.01.29 (002) Mar 29 2013ADSL Firmware Version:0.78.0Recovery Firmware:1.01.20 (011)Setup Wizard Version:20110728.00
As indicated in the subject, wireless users are finding that it is either unattachable (shows up in the list but fails to attach) or if you manage to authenticate and get in, it's painfully slow or simply drops out. Security is WPA-PSK. Only noticed the issue after a couple of Windows 8 laptops came into the household, but the problem still seems to be there when they are off so not sure if they are connected in some way or not. Updated to the latest firmware - no change. Wired connections are fine and when it's initially restarted, so is the wireless, seems to happen sometime after wireless services are restarted. Only the one Wireless SSID, nothing fancy, max users around 5, all on laptops or the odd pad. I changed channels done narrow wide etc, (using mixed mode - some Wireless N laptops some Wireless B/G. Nothing seems to make any difference. No log entries until the Wireless system is restarted, doesn't require a reboot of the router, just a SUBMIT of the existing wireless settings to force it to restart.
Linksys Wireless Router :: WRT160N Requires Regular Reboots?
Jul 25, 2012So I have a WRT160N firmware v3.0 wired connection to my PC, and at least once a day my connection speed drops from 2mbs down to almost dial up speeds at 60kps. Just unplugging the router then plugging it back in seems to fix it every time. I've contacted my service provider and they say there's no issue on their end, and since I don't get this problem when I plug the modem directly to the PC I agree with them. I've done a factory reset and that didn't work. I've gone through the FAQ and can't find anything useful in there.
View 7 Replies View RelatedLinksys Wireless Router :: WRT54G V6 - ISP Requires PAP Or CHAP Authentication?
Sep 9, 2011 My ISP here at my mother's in Italy (www.teletu.it) gave me the following configuration:
1. Supported Protocol: PPPoE or PPPoA
2. VPI: 8
3. VCI: 35
4. Encapsulation: LLC (If not supported: VCMUX/NULL)
5. Modulation: Multimode
6. Authentication Protocol: PAP or CHAP
if I connect my laptop to the ADSL modem, it all works just fine and I can connect to the internet (as you can see )
HOWEVER, if I then try to configure my WRT54G v6 to use this internet connection (I NEED to be wireless here, or I won't be able to use my iPhone and iPad), there is no way apparently for me to configure the Encapsulation, Modulation, and Authentication Protocol above. I just upgraded my WRT54G's firmware, and am now running firmware Ver.1.02.8, 10/05/2009. I was hoping this would allow me to set these parameters, but I can't find a way.
I tried just configuring the WRT54G with PPPoE and the ISP's userId/password, but this doesn't seem to suffice, and I don't see any other settings I could try.
Cisco Wireless :: WLC5508 - Requires To Setup A Dynamic Interface On A Network?
Aug 10, 2012Having setup several WLC4402's in the past, I am posed with a new implementation that I have never tried before. I will be setting up a new 5508 that will ONLY be used for remote access-points in H-REAP mode. It is going into a data center and there will be no local LWAPP's.Is it still required to setup a dynamic interface on a network that will essentially only have the controller IP? Or can I serve all the AP's out of the single, untagged management interface (which I believe is also the old ap-manager interface now?)
View 2 Replies View RelatedLinksys Wireless Router :: WRT350N Requires A Password From Outside LAN When Accessed As Ftp Drive
Aug 2, 2011My storage link drive is accessible from my lan requireing a userid and password, but it can be accessed from outside my lan through ftp without userid and password. how do I change it so it requires a password from outside my lan when accessed as an ftp drive? I have the WRT350N
View 1 Replies View RelatedLinksys Wireless Adapters :: AE1000 Requires Connections To Be Managed By Windows 7
Jan 19, 2011Trying to install the Linksys AE1000 wireless adapter on Windows 7 x64. So I follow the instructions. insert CD. Insert adapter.The i get this error:
"Linksys Wireless-N Router requires that wireless connections are to be managed by the Microsoft Windows Wireless Connection Manager. Some laptops and computers are pre-loaded with a different wireless connection manager which prevents your Valet or Linksys Wireless-N Router installation from loading. If this is the case, then you will need to disable or turn OFF the other wireless connection manager, and enable the Microsoft Windows Wireless Connection Manager instead."
What manager? This is windows 7, I'm not using any third party wireless utility so I don't understand why I'm getting this particular error. If windows wireless connection manager is off, how do I enable it?I've always managed my network setting through the Network and sharing center,I've tried:
(1) sweeping registry files before install(2) Plugging in AE1000 first and manually installing drivers
When I did this, the device shows up successfully in device manager and the driver installs smoothly, however when I go to network adapters, the AE1000 is listed as disabled. I tried enabling it but to no avail. Running the network diagnostics claims the driver doesn't work despite the fact that it installed successfully.
After several restarts and disabling/re-installations I recieve the same error.The end goal is to connect the AE1000 to a Cisco E3000 router.
Linksys Cable / DSL :: Cisco X2000 Drops Wireless Signal - Requires Reboot
Jul 15, 2012I recently installed a Cisco X2000. Several PCs running Windows XP Pro connect wirelessly. Also, we have an Android device and iPhone connected to the wireless network. We have a network printer and network drive connected via wires to the router. Most of the time the router and cable modem features work well. However, every so often all devices lose wireless signal simultaneously. It is not possible to reconnect to the X2000 unless I unplug the X2000 and plug it back in. After this reboot, we can connect again. Obviously, this is quite frustrating. By the way, we get acceptable signal strength after the X2000 locks out however none of the devices (computers or phones) are able to connect.
View 1 Replies View RelatedLinksys Wireless Router :: E4200 USB Printer Requires Cisco Connect Software?
Jul 28, 2011I was excited to learn that USB printer support was added to the E4200. I'm disappointed to find that the USB printer option that is available in firmware version 1.0.02 requires Cisco Connect software. There is no version of Cisco Connect for Linux. I was hoping that this would allow the printer to be shared among my Win7 desktop, Win7 laptop, and my Linux desktop running Ubuntu 10.10. No such luck. WIth the printer connected to the router I can print with any one computer. My previous configuration had the printer connected to my WIn7 desktop so that desktop had to be turned-on to print. The bottom line is that I still can't print from the Linux box without turning on the desktop machine. Cisco please provide a way to connect to the printer without using the Connect software! Or provide a java version that can be run on any OS.
View 4 Replies View RelatedTP-Link 300Mbps Wireless :: TL-WR1043ND Stops Working Randomly And Requires Power Recycle
Dec 3, 2012Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 rel 33996n
ISP : Verizon Fios
(My router says Version 1.9).Had this router about a month. It works fine. Using it in Wireless mode wpa2 security. Get excellent speeds. HOWEVER> It freqently drops connectivity and fails to allow wireless clients to connect at all. (You can see the SSID via wireless clients, but not connect to it). To restore it, I have to disconnect from Power, wait a moment, then reconnect to power. It recycles and connections are working again with no problems (UNTIL NEXT TIME). Seems to happen every few days.
I checked the web site and I appear to have the most current firmware.I have a Trendnet router on different channels in another part of the house which has never had this problem. I disconnected it to test if it was somehow involved, but the TP-Link router had same symptoms when it (trendnet) was not connected. Our Actiontec Router (VERIZON provides this as base connectin to them serving the Cable TV DVRs also) ) has its wireless disabled and is the DHCP server provider to the home network. DHCP is disabled on the TP Link.
Cisco Firewall :: ASA 5510 / Ip Service Object And Service Group
May 16, 2011When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
Cisco Application :: ACE 20 Service-policy Out Of Service / Still Able To Connect To VIP
Feb 28, 2012We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
D-Link DIR-655 :: Deny All Access Except Specific IP's To Service
Apr 1, 2013Is it possible to deny all access except specific IP's to a service on a Dlink DIR-655 ?Say a web server on port 1234.The allowed IP's are not in a range.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 Access Service Required
Oct 30, 2012We are using ACS 5.2 in our Network. As can be seen in the provided figure, nothing in the Access Services can be displayed properly.
View 4 Replies View RelatedLimited Access - After Windows 7 Service Pack 1 Update?
Dec 2, 2012My HP laptop was working perfectly using wireless Internet but after an update of the SERVICE PACK 1 it now isn't working. It connects to the Internet but it says 'LIMITED ACCESS'. It's clearly something to do with that update as the Internet works perfectly on all over devices in the house
View 3 Replies View RelatedCisco :: 4402 Unable To Access Service-port
Dec 9, 2012I have a 4402 and recently I have not been able to access the device via the service-port interface. The service-port has an IP Address and it is connected to an access port in the Vlan which I am coming from, however it cannot even ping it's gateway, which as mentioned is within the same network. When I am at the console of the controller I can ping the service-port interface IP that I have assigned, just nothing else.
View 4 Replies View RelatedCisco :: Topology Service In LMS 4.0 / ANIServer Service May Be Down
Mar 25, 2013I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP
DNS is working using host file in driversetc i restarted the server
restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..
Broadband :: Network Access Protection Agent Service Is Not Running
Dec 13, 2011network access protection agent service is not running
View 1 Replies View RelatedWNDR3400 Windows Service Can't Access Files On XP Home Network
Feb 15, 2013I've been able to duplicate my problem by using another WinXp computers instead of a USB drive plugged into my router. Same exact problem. So, the bottom line is that I can access (and modify) the files across the network if I'm doing so manually, but my Windows service fails when trying to do the same thing. If I run the program through Visual Studio, it works. If I run that same exact code as a Windows service, it fails.
I've created a Windows service that needs to access a common network location. To test it at home, I plugged a USB drive into my Netgear N600 WNDR3400 router. The USB storage settings show the workgroup name as Workgroup, and the file path is. [code]
Cisco Security :: ACS 5.1 For Wireless Access
Jun 26, 2012The ACS is connected against AD correctly, as people from administrator group access successfully to device admin.AAA Clients are defined (autonomous APs) matching radius protocolPolicy elements > Authorization > Network Access, a new profile has been created to guaranteed the access to the network with all the combos in the default valueA new Access Policy > Access Service has been created (WIFI) matching protocols EAP-TLS (I think this is the problem)Identity is set to AD1Authorization has a rule with compound condition, matching AD1 -> External Group -> Wireless group, and Authorization Profiles set to the one created in step 3.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.3 - 11033 Selected Service Type Is Not Network Access
Apr 15, 2013I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3
I understand that by default, ACS only supports TACACS for device administration. So I'll get this error when trying RADIUS:
11033 Selected Service type is not Network Access
Description:
RADIUS requests can only be processed by Access Services that are of type Network Access
Resolution Text: Verify that the Service Selection Policy rules are correct
However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect.
Security Key To Access Laptop From Wireless Router?
Feb 3, 2013Need security key to access laptop from wireless router. Cannot remember original username or password.
View 1 Replies View RelatedWireless :: Can't Connect To The Free Internet Connection?
Nov 1, 2011Can 't connect to the free internet connection, but can on secured and that one have weak signal. What is problem?
View 7 Replies View Related
