Network TCP Connections Attempted By Service Files - Security Risk?
Mar 10, 2012
My AV often reports my windows 7 ultimate 64 service files, such as winmon.exe or or service.exe requesting opened TCP connections along with a number of .DLL filkes, and then times they are flagged as heuristic behavior modification, however i know many of those are undeletable, due to windows security replacing them as soon as they are noticed to be missing and in another thread it was also indicated that these must be deleted from three places at once almost to actually prevent those from being instantly replaced, this explains maybe why i get this repeatedly immediately after boot up, but after five or some times it slows down to now and then.still quite a hassle to stop on start up.
View 2 Replies
ADVERTISEMENT
Oct 14, 2012
Found out if you make a ftp user called root you get access to your flash drive in via ftp it is normal or a bug ?
View 1 Replies
View Related
Feb 15, 2013
I've been able to duplicate my problem by using another WinXp computers instead of a USB drive plugged into my router. Same exact problem. So, the bottom line is that I can access (and modify) the files across the network if I'm doing so manually, but my Windows service fails when trying to do the same thing. If I run the program through Visual Studio, it works. If I run that same exact code as a Windows service, it fails.
I've created a Windows service that needs to access a common network location. To test it at home, I plugged a USB drive into my Netgear N600 WNDR3400 router. The USB storage settings show the workgroup name as Workgroup, and the file path is. [code]
View 1 Replies
View Related
Feb 14, 2012
I was having an issue with Comcast phone and internet services.Comcast had me disconnect and reconnect my modem and router. When service came back to normal one of my network connections was no longer available to me. I have two connections (one for use at my home which is a secured one) and one I use when I go to my sons home. My computer now only allows me to connect to a network called "Linksys" which may be available to the public. The connection I want to use shows up if I go to control Panel/View Network Status/Manage wireless network, and it is the first choice on the list, but the computer always uses the unsecured "Linksys". I'm afraid to do my banking over that network but I'm also afraid to start fooling with it and having no network. [code]
View 14 Replies
View Related
Aug 31, 2012
Where can I find a log or list of devices that attempted to access my EA4500 wireless network?I am using the cloud services to monitor my EA4500 usage in an apartment environment.
View 1 Replies
View Related
Nov 30, 2011
Windows firewall settings cannot be displayed because the associated service is not running
View 4 Replies
View Related
Apr 7, 2013
i'am using csm 4.1 and i have configured the keep audit log for 30 days and the entries becomes older than the number of days specified in the keep audit log without deleting, i don't understand why this happend and how can i make shur that the purge is done.
if the purge is automaticaly or i have to delete the oldest entries by my self.
View 1 Replies
View Related
May 30, 2011
I have access to free wireless service but it requires a security key? How do I get this key?
View 3 Replies
View Related
Sep 27, 2012
When I do an Inventory Collection, the job doesn´t work with some devices and I have to restart the server. The job doesn´t fail but the log ICServer.log doesn´t got any information and it works for hours and hours and when it finally stops I can see that devices are not attempted.
I have done some succesfull Inventory Collections with Cisco 3750 switches and 805 routes. I have tried witch Cisco 2811 routers and 2950 and 2960 switches but it doesn´t work.
I have tried to update my LMS4.0.1 but it doesn´t find any actualization. However, in the Cisco download page there are some patches.
View 10 Replies
View Related
Jun 30, 2011
What is the best email service that puts a high priority on privacy yet is still easy to use on a daily basis?
View 2 Replies
View Related
Mar 15, 2011
Have a customer who has two ISPs right now and only using one through a basic SOHO router. Looking to upgrade to something that supports dual WAN and allows connections from outside in on both WAN ports. There are 25-30 inside hosts.Requirements: Allow incoming connections on BOTH WAN ports to a single inside host
-This is a web app that needs as close to 100% uptime as possible
-Round robin DNS is set up
-Failover for internal people should one of the ISPs go down
Looking at either an ASA 5505 with Security Plus or an 891 Integrated Service Router.
View 1 Replies
View Related
Feb 6, 2011
I'm unable to maintain a connection with an FTP host outside my network through my Cisco 871W Wireless/Wired router. I am able to establish a connection with the external FTP server, but when I attempt to transmit files I get repeated disconnections and failures.
The software running on the device is IOS C870-ADVSECURITYK9-M, Version 12.3(8)YI2 RELEASE SOFTWARE (fc1)
Synched to technology version 12.3(10.3)T2
System Bootstrap Version 12.3(8r)YI
I know it has to be somewhere in the configuration, but SDM no longer operates and I'm not entirely familiar with the IOS command set. When I remove the Cisco device and plug my computer directly into my ISP network, I am able to send files via FTP with no problems.
View 1 Replies
View Related
Oct 7, 2011
We have just got our daughter a brand new Dell laptop for her birthday, it is fine apart from she cant get into half the websites she wants to. On these websites internet explorer just hangs.
Examples of hanging websites are:Argos, Travel Republic, Easy Jet, Vue Cinemas, Bin weevils, National Rail, Expedia, Ebookers
The laptop has Windows 7 and Internet Exolorer 9.I suspect it is something to do with the dreaded Flash but the laptop has Adobe Shockwave Flash Object enabled and any attempt to download Adobe Flash Player results in a 12% timeout download (always 12%)
Funnily enough I have an old Dimension 5000 which behaves in exactly the same way including the 12% download but I expected a brand new laptop to work..Is this a known bug with Dell products ie. you cant access half the websites on the internet without a load of grief ?
View 7 Replies
View Related
Aug 8, 2012
I am having a lab switch. Recently I am getting "%SCHED-3-SEMLOCKED: SNMP ENGINE attempted to lock a semaphore, already locked by itself" message and the switch has started to hang a little bit. I just want to know what this log means and how to trouble shoot.
I'm using C3750, version 12.2(25)SEE3
View 8 Replies
View Related
Jul 5, 2011
We have a PIX 535 with unlimited lisence, it has 1,048,953 in use connections because the timeouts have been changed to 24 hour. I am addressing this issue but was wondering why its so high when the max concurrent sessions is supposed to be 500,000 as listed in the product spec. Also when it reaches it max and cannot allocate a connection what PIX syslog error message number would it send?
View 1 Replies
View Related
Jan 24, 2012
I'm not sure about my title, it;'s the best I could come up with. I have approximately 7 computers, two iPhone, and iPad, wireless printers and a network attached storage. Most are connected over via wifi, the exceptions being one pc, the nas and a printer. I plan to add six more devices plus some ip cams. The way the router or network is configured whenever a guest connects to our wifi they can "see" our computers. I haven't been able to tell if they can see the files or just the name of the computer. Question 1: How can I tell if the guests are able to access the data on our computers or networked drive? Question 2: If I add a switch will I need to do anything special with regard to security?
View 1 Replies
View Related
May 22, 2011
We have an ASA5510 and we're currently using 1 internet connection to handle our site-to-site VPN connection and our internet traffic. We have a second internet connection on hand. What we would like to do it use BOTH internet connections: (1) will be dedicated to our VPN connection, (1) will be handling all our internet traffic. How can we get this setup? We're running Software Version 8.4(1)
View 1 Replies
View Related
Apr 20, 2013
I was at my computer when the desktop appearance and taskbar changed. I immediately opened task manager to see what program might have caused this and didn't see anything out of the ordinary. Then about 2 minutes later my desktop changed back to what it normally is. I then went and disabled remote desktop connections... I think that someone may have accessed my pc remotely, buy I wasn't able to catch them at it. Is there any way to review incoming remote desktop connections historically?
View 3 Replies
View Related
May 16, 2011
When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
View 8 Replies
View Related
Jun 8, 2012
I need a software that i can use to transfer files from one windows PC to another over the LAN network.I've tried "Quick'n Easy FTP server Lite" and it works, but its really slow (About 2MB/s) ( i know my hardware can go much faster than the software is allowing). But at least the speeds were constant and unchangingI have also tried Windows Easy Transfer. But that software makes it a bit harder to send back and for whenever i feel like it, and although sometime i would hit speeds 5 times faster than with the previously mentioned software (about 12MB/s) , those speeds were not constant. It would be slow (around 1MB/s) and then spike up, and then go back down, and repeat in that fashion
View 8 Replies
View Related
Dec 24, 2011
I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
View 3 Replies
View Related
Jan 19, 2013
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies
View Related
Feb 28, 2012
We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
View 10 Replies
View Related
Apr 17, 2012
I have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies
View Related
Mar 25, 2013
I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP
DNS is working using host file in driversetc i restarted the server
restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..
View 6 Replies
View Related
Jul 19, 2011
I want to set up my desk top and laptop so that I can share all the files on desk top or laptop.
View 1 Replies
View Related
Oct 11, 2011
I have two Win XP machines. One is connected to the LAN and the other is a standalone. I have installed an additional network card on the machine connected to the LAN. That machine is linked to the standalone through a switch using the 162.198.1.xxx sequence of IPs, with 255.255.255.0 as the subnet mask and no DNSWINS, or anything else. I can ping either machine from the other through the private network, but cannot see the files. I need to pull certain files from the standalone, but have not been able to even see them.
View 4 Replies
View Related
Mar 22, 2012
I am trying to map network and copy files to D:BackupSql_Backup?How can I sue this with spaces in my folders
net use R: \000.00.0.00Program FilesMicrosoft SQL ServerMSSQLBACKUP"
cd
echo off
R:
cd
Xcopy . /D /I /F /E /Y D:BackupSql_Backup
net use R: /delete /y
exit
View 5 Replies
View Related
Sep 26, 2012
Im looking for tool that wud manage nsf files on network...
View 1 Replies
View Related
Oct 12, 2011
I have a network using windows home server 1, with 3 computers hooked up to it. Two of them work fine but the 3rd computer cannot successfully copy a file to the network. However, I can copy a file from the network to computer 3.This started suddenly about a week ago and there were no driver updates or anything changed that would cause this. When I copy a file from the network to computer 3 I get about 80mb/second. When I try the reverse, it pauses and after about 5 seconds I get a message saying:There is a problem accessing \serverserverfolder. Make sure you are connected to the network and try again.If I try to copy a small file of a few megabytes it will copy though.
View 5 Replies
View Related
Sep 19, 2011
I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive. I am planning to allow a tenant in another building connect via an ethernet cable connected to my router. Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router? I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.
View 1 Replies
View Related
Sep 4, 2012
As per me 24x7 network monitoring service is one of the best technique.Even we can protect large scale or enterprise level network with unwanted attacks or virus. Alternative better option of Network Monitoring Service
View 1 Replies
View Related
Feb 3, 2013
I fought with trying to hang two old BEFSR41 routers on an incoming TWC cable internet. I have a couple of streams going out and one coming in... and I think there are some collissions going on that cause little Urps in the streams. I thought I could put them on two different subnets. Ha. No luck at all so far. The scheme they gave me used a fixed IP and a subnet of 255.255.255.252... now I think I understand why TWC assigned a subnet of 255....252 - so I could only use ONE router. Their little toy is still routing, mine does it's thing.. that's it. In order to add another router and a totally different group of PC's on the same bandwidth... I'd have to get into their box and change the subnet scheme to something more open.. 255.....248, or maybe back down to 255...255.0 I guess..
View 1 Replies
View Related
