Can Only Copy Files One Way On Network
Oct 12, 2011
I have a network using windows home server 1, with 3 computers hooked up to it. Two of them work fine but the 3rd computer cannot successfully copy a file to the network. However, I can copy a file from the network to computer 3.This started suddenly about a week ago and there were no driver updates or anything changed that would cause this. When I copy a file from the network to computer 3 I get about 80mb/second. When I try the reverse, it pauses and after about 5 seconds I get a message saying:There is a problem accessing \serverserverfolder. Make sure you are connected to the network and try again.If I try to copy a small file of a few megabytes it will copy though.
View 5 Replies
ADVERTISEMENT
Mar 22, 2012
I am trying to map network and copy files to D:BackupSql_Backup?How can I sue this with spaces in my folders
net use R: \000.00.0.00Program FilesMicrosoft SQL ServerMSSQLBACKUP"
cd
echo off
R:
cd
Xcopy . /D /I /F /E /Y D:BackupSql_Backup
net use R: /delete /y
exit
View 5 Replies
View Related
Oct 5, 2011
Basic info: SBS 2008 (64bit), XP-sp3 (32bit) workstations, gigabit switch, SEP. App is Sage Masterbuilder.Network config: Server is 1gb to switch over CAT6. All the workstations are 100mb over CAT5. SEP is set to exclude all pertinent files on both the server and workstations.Problem: The program is called MasterBuilder and does job costing and much more. In the job costing feature there is an option to "Compute" job costing. In version 16.x, when the "Compute" was performed the task was done very quickly. After an upgrade to version 17.x it is very SLOW. According to tech support, our network is at fault since it is a database function over the network.Troubleshooting done: Tech support blamed our network speed (100mb) and switch. We had a Netgear 100mb switch so we replaced it with a GB switch however the cabling will not support GB. Being a managed switch I set all the ports to 100mb except the server port. Even tried the server plugged into a 100mb port and no change. I am confident there are no speed issues on our network. All other programs perform flawlessly. ACAD, Exchange, data transfers and many other high data use programs work perfectly. I updated the network card drivers in the server as well. There are no performance or resource issues on the workstations. I monitored the network traffic at the workstations, server and switch with no issues and about 2.5% utilization during the slow "Compute" process. The switch shows no errors at all, no collisions, no dropped packets, nothing. I also disabled the SEP.
During testing and while the slow "Compute" was going on, I copied a large folder (400mb) from the server to the workstations see the impact on network utilization. As soon as I start the copy process the "Compute" process speeds up to normal and zips by as it should. As soon as I cancel the copy process the "Compute" drops right back to very slow.
View 4 Replies
View Related
Jun 27, 2011
I need to do a backup on our laptop prior to beginning the malware removal process. I need to move 22GB+. There is plenty of room on our desktop to store the files.Would it be best to use file sharing between the 2 PCs? They are both USB connected to the same router. Or, is it possible to transfer the files by connecting them directly to each other via USB?
View 5 Replies
View Related
May 14, 2013
I record videos after motion detection on the cameras sd-card. Is there a way to copy all the files from sd-card to the pc? I wasn't able to copy them with the web-interface. I don't just want to delete the videos from time to time. I also want to archive them local.
View 3 Replies
View Related
Oct 29, 2012
I made an ASDM upgrade for one of my two CISCO ASA 5520. If I copy a file to the primary ASA's flash, is there any command I can run on the primary ASA to copy a file to the secondary ASA?
View 1 Replies
View Related
Nov 9, 2011
Is it possible to use the USB ports on a ASA5510's to copy files onto the flash?
I have not been able to find any ionfo on this in the users guides ?
View 2 Replies
View Related
Jul 9, 2012
I am trying to research the possiblity of backing up IOS and configurations from an Etherswitch module, and being able to store the files onto the Host Router's flash (3925 ISR). and then being able to recover that IOS and configuration, in case I have to replace the Etherswitch Module.
View 4 Replies
View Related
Aug 27, 2011
I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. The drive has enough free space. However, I cannot copy to this external drive large (e.g. 700 MB) files.
View 5 Replies
View Related
Apr 16, 2012
Two computers (XP and Win7) connected on office LAN, cisco 2960, not same switches, but all in the same rack, and link togeter, same IP subnet, tried to copy some kind of 26G files from one to another, using Windows share folders, and it showed need 23 hours to finish the copying.It's not the first time, actually we always experienced very slow speed when copying files on Windows share folders. Did not see any particualler message on the switch. ports are all full/100m.
View 9 Replies
View Related
Feb 28, 2012
I have Dell machine with Win Xp3 loaded, on my local network (and other computers). I set NIC card "Link Speed & Duplex" to autosense & make direct connection to my modem and works ok.When I plug into the network router I get the 'Cable is unplugged' and no Internet connection.I can change the "Link Speed & Duplex" to 10Mbps/Full Duplex and get intermitten connection. Also when I copy a file from Mapped drive I get "Cannot copy xxx - The specified network name is no longer available".
1. the NIC software is recently updated PRO/100 Adapter NDIS 5.1 driver
2. Although Microsoft has suggested Symantec < ver 4 has had an endpoint problem, I have 10.1.6.6000.
3. TCP/IP Properties are on automatic like the other computers.
View 3 Replies
View Related
Jan 16, 2013
copy or move into local area network? If any software to check which PC or Workstation or Users or IP to do this.
View 2 Replies
View Related
Apr 18, 2011
I am having a problem with copying files onto my Storage device Connected to my WAG320N, the router is up to date with the latest updates and has been reset in an attempt to overcome this problem. I currently have attached a 2TB Seagate External Hard drive plugged directly into the router formatted in NTFS, and using Windows 7 Bit to access the Routers Webpage and the External Drive.
I am able to set up permissions and access control all okay, so some users can see some folders or have access in Read only or Read and Write Permissions, however I have been using the Admin account when accessing the drive which has Read and Write permissions to all Folders on the Drive. I can create a new document on the Drive (Right click > New > .Docx or .txt) and save file successfully and can view from other computers from the network, however I cannot Copy from any of the computers to the Network drive (e.g.. Copy .txt file from Computer to Network drive), I get the Windows Transfer Dialog and it Calculates Transfer Rate for a while before telling me it's unable to and that I can either select Try Again which comes up with the same error message, or Cancel the transfer.The reason why I want to be able to Copy files to the Network Drive is so I can centralise all the Photos, Videos and other files and documents to be shared to all computers on the network.
View 1 Replies
View Related
Jun 8, 2012
I need a software that i can use to transfer files from one windows PC to another over the LAN network.I've tried "Quick'n Easy FTP server Lite" and it works, but its really slow (About 2MB/s) ( i know my hardware can go much faster than the software is allowing). But at least the speeds were constant and unchangingI have also tried Windows Easy Transfer. But that software makes it a bit harder to send back and for whenever i feel like it, and although sometime i would hit speeds 5 times faster than with the previously mentioned software (about 12MB/s) , those speeds were not constant. It would be slow (around 1MB/s) and then spike up, and then go back down, and repeat in that fashion
View 8 Replies
View Related
Jul 19, 2011
I am using TFTPD32 to upgrade the IOS on a router. When I type in the commands copy tftp flash and enter all the necessary information, the router sits for a minute or so and then times out. There is no entry made in the log when it times out. copy flash tftp yields the same result. The fa 0/0 interface and the TFTP server are both on the same subnet and can successfully ping one anothe
View 16 Replies
View Related
Apr 17, 2012
I have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies
View Related
Jul 19, 2011
I want to set up my desk top and laptop so that I can share all the files on desk top or laptop.
View 1 Replies
View Related
Oct 11, 2011
I have two Win XP machines. One is connected to the LAN and the other is a standalone. I have installed an additional network card on the machine connected to the LAN. That machine is linked to the standalone through a switch using the 162.198.1.xxx sequence of IPs, with 255.255.255.0 as the subnet mask and no DNSWINS, or anything else. I can ping either machine from the other through the private network, but cannot see the files. I need to pull certain files from the standalone, but have not been able to even see them.
View 4 Replies
View Related
Sep 26, 2012
Im looking for tool that wud manage nsf files on network...
View 1 Replies
View Related
Jul 30, 2011
My proplem is about my home network. There is computers on my home network can access to my files!How can i protect my files from them
View 2 Replies
View Related
Jan 19, 2011
I have a router-based home network in which the desktop running XP media center is connected by cable to the router. There are 2 wireless laptops, one running XP home and the other Windows 7.The laptops can talk to each other, and the desktop can talk to the laptops.But I cannot access the desktop from the laptops. I can see the (shared) folders, but when I click on one I get the message: "You might not have permission to use this network resource..Not enough server storage is available to process this command." One solution suggested in several places is to change the IRPStackSize to 15. However, if I start the desktop in safe mode with networking, I can access the files.I can also access the machine using remote desktop.One extra frustration is that this is a problem that has happened relatively recently. It used to work OK.
View 8 Replies
View Related
Feb 8, 2013
I want to transfer big fiiles from PC to another PC, and it has happened frequently, I was wondering is there any way that I can send them directly with high speed if they are connected to the same router (my Router),I got an Desktop with Windows 8 64bit.The target PC (to transfer files) Laptop Windows 7
View 2 Replies
View Related
Apr 20, 2011
How to share files in wireless network
View 3 Replies
View Related
Jul 13, 2011
i have been wanting to do this LAN sharing thingy for a while now.so here's the deal.i wanna do is setup our PC's so we could create a network of our own and share files just like in LAN but not over the internet.its kinda like we would on a Homegroup in win7.also have a few more PC's on different ISP's.can they be added to the network too?
View 7 Replies
View Related
Aug 23, 2011
I am trying to put a link on our Intranet page to several documents that are updated daily by specific users. These users save the documents in their department folders, which are only acessible by their department and I.T. (me). Right now I have a .bat file that checks every half hour of the work day to see if it has been updated, if it has it will be moved to a location in the Intranet folder which will update the link on the Intranet. While users can view the Intranet, they do not have access to view the files or folders that house the Intranet html coding etc.This option works but our users are complaining that it isn't instantaneous. Any ideas how I can do this on a network while keeping everyone's security in place and not give them extra rights to the Intranet folders?
View 3 Replies
View Related
Feb 23, 2012
There are currently four computers in the house, all running Windows 7. Two of them are wired using homeplugs (different brands) and two of them are wireless.
I've tried using Homegroups but this never seems to work.Now that I have all the computers using the same OS I want to start from scratch and set up a basic home network so I can move files around between computers.
View 4 Replies
View Related
Feb 12, 2012
I love sharing on my home network to transfer files from one computer to the next. However, I will soon have tenants in my house sharing my network ...so they can use my Wi-Fi to get on the internet.I need a solution to give them access to the internet without losing my own network sharing ability.I do not want them accessing my files.I have Windows XP home and a Dlink WBR-2310 router.As I see it, I need to either upgrade to a router with a Guest Zone/Access feature ...OR..upgrade to Windows 7(?) to give myself more networking options (i.e. file sharing where I select the users or set a password). Currently the XP permissions are too general.
View 3 Replies
View Related
Jul 12, 2012
i have a problem with my small office network. the issue is i have 2 public ip address that was configured in 2 (devices) dlink router and linksys cisco wireless router.
with individual static ip address:
1st router connected to dlink switch (smartweb) and 2nd wireless router is only for the admin user.
how can i able to share a files / printer with these 2 network device?
View 1 Replies
View Related
Aug 7, 2012
There are no IT employees at my small company and everyone else has started coming to me with their computer issues. Normally it's fairly straight-forward, but I've never come across this one before.We've got a computer that's connected to the network and has internet access, but cannot access the network drive like the other computers can.The shared drive is found under computer --> network location.The operating system is Windows 7.I've tried disconnecting from the network and reconnecting, and mapping the network drive.
View 1 Replies
View Related
Nov 24, 2011
I'm trying to transfer files from my wired desktop to my wireless laptop, and smaller files seem to transfer okay. Whenever I try to transfer a really large file, however, the internet and connectivity totally drops on my desktop (which is giving the file) and causes the laptop to lose the file. The desktop computer stays offline for about 1-2 minutes afterward before it either starts up again on its own or I reset the network adapter. I suppose it's important to note as well that the file transfer can fail at the very beginning, in the middle, or even at the very end, but my desktop computer always loses its connection whenever the interruption happens... but sometimes it can successfully get almost all the way through the file transferI tried following some of the steps in this case to confirm that I can ping and do all that jazz to my laptop and all of the services are running, since our problems seem similar. I've disabled all firewalls as well. However, since one computer is actually wired to the router, I don't think the solution will be quite the same
View 13 Replies
View Related
Sep 28, 2012
I am trying to transfer files from my laptop to my desktop, but when I open the 'network' folder from the start menu to access the desktop from the laptop, the desktop computer is not shown. I ensured that the workgroup names are the same, all sharing is turned on on both computers in Network and Sharing Center, since it is a private network, I checked the router settings and nothing seems to be wrong. The desktop is running Windows Vista Business x86 and the laptop is running Windows 7 Home Premium x64, so there is no way to make a Homegroup connection. However, I can see the laptop computer from the desktop's network folder. I click on it to gain access, but I get an error message: "Network Error, Windows cannot access \****-PC, check the spelling of the name. Otherwise, there might be a problem with your network. Error code: 0x80070035 The network path was not found." have checked all wiring, router settings, and nic card settings, have done a successful ping, even Network and Sharing Center, I have also checked sharing permissions and permission levels, I see nothing that could possibly affect the access of the computers.
The only thing I can think of is that when I click on the 'Network ID' button under the Computer Name tab in System Properties on the desktop, it asks join a domain or workgroup, it will not let me save the selection "This is a home computer; it's not part of a business network," that may or may not be the issue, because it will only remain on "This computer is part of a business network" probably because I am running Windows Vista Business.
View 7 Replies
View Related
Jan 2, 2012
I have a small business network that connects 3 wired pc's and 2 wireless laptops. I am running a point of sale system on the network. I recently replaced the computer I use as a server. The work stations now run the point of sale system so slowly, they almost cannot be used. Both the wired and wireless systems are running slower. Both wired workstations are running Windows XP, both the old and new "server" are running Windows 7 64 bit. Both are Pentium dual core with 6gb of RAM. The old system has a Realtek RTL8168C network card, and the new system has an Intel 82579V network card. I replaced the computer due to other hardware issues. The cable used to connect it to the router is the same. The old machine ran the workstations MUCH faster. Does this have to do with the network card, or some other setting I am missing.I tried to make all the settings exactly the same so my point of sale system would still recognize the new computer.
View 4 Replies
View Related
Nov 6, 2012
Okay so I had all this set up to be simple back in windows 7.
Basically, what I did was turn off password required sharing or whatever, so all I had to do was click on networks in the left side panel when i was in My Computer and click on say, my wifes laptop and it'd open the public folder she had there, and I could drag and drop stuff into and out of it. And same for her and seeing mine.
Now that I have windows 8 on my PC It's all buggered up.
I didn't change ANY settings on HER laptop, but when I try and access it (I used it to back up important files while fresh installing w8) it's asking me for a username and password
View 3 Replies
View Related
