Network App Very Slow Unless Copy Files At The Same Time
Oct 5, 2011
Basic info: SBS 2008 (64bit), XP-sp3 (32bit) workstations, gigabit switch, SEP. App is Sage Masterbuilder.Network config: Server is 1gb to switch over CAT6. All the workstations are 100mb over CAT5. SEP is set to exclude all pertinent files on both the server and workstations.Problem: The program is called MasterBuilder and does job costing and much more. In the job costing feature there is an option to "Compute" job costing. In version 16.x, when the "Compute" was performed the task was done very quickly. After an upgrade to version 17.x it is very SLOW. According to tech support, our network is at fault since it is a database function over the network.Troubleshooting done: Tech support blamed our network speed (100mb) and switch. We had a Netgear 100mb switch so we replaced it with a GB switch however the cabling will not support GB. Being a managed switch I set all the ports to 100mb except the server port. Even tried the server plugged into a 100mb port and no change. I am confident there are no speed issues on our network. All other programs perform flawlessly. ACAD, Exchange, data transfers and many other high data use programs work perfectly. I updated the network card drivers in the server as well. There are no performance or resource issues on the workstations. I monitored the network traffic at the workstations, server and switch with no issues and about 2.5% utilization during the slow "Compute" process. The switch shows no errors at all, no collisions, no dropped packets, nothing. I also disabled the SEP.
During testing and while the slow "Compute" was going on, I copied a large folder (400mb) from the server to the workstations see the impact on network utilization. As soon as I start the copy process the "Compute" process speeds up to normal and zips by as it should. As soon as I cancel the copy process the "Compute" drops right back to very slow.
View 4 Replies
ADVERTISEMENT
Apr 16, 2012
Two computers (XP and Win7) connected on office LAN, cisco 2960, not same switches, but all in the same rack, and link togeter, same IP subnet, tried to copy some kind of 26G files from one to another, using Windows share folders, and it showed need 23 hours to finish the copying.It's not the first time, actually we always experienced very slow speed when copying files on Windows share folders. Did not see any particualler message on the switch. ports are all full/100m.
View 9 Replies
View Related
Mar 22, 2012
I am trying to map network and copy files to D:BackupSql_Backup?How can I sue this with spaces in my folders
net use R: \000.00.0.00Program FilesMicrosoft SQL ServerMSSQLBACKUP"
cd
echo off
R:
cd
Xcopy . /D /I /F /E /Y D:BackupSql_Backup
net use R: /delete /y
exit
View 5 Replies
View Related
Oct 12, 2011
I have a network using windows home server 1, with 3 computers hooked up to it. Two of them work fine but the 3rd computer cannot successfully copy a file to the network. However, I can copy a file from the network to computer 3.This started suddenly about a week ago and there were no driver updates or anything changed that would cause this. When I copy a file from the network to computer 3 I get about 80mb/second. When I try the reverse, it pauses and after about 5 seconds I get a message saying:There is a problem accessing \serverserverfolder. Make sure you are connected to the network and try again.If I try to copy a small file of a few megabytes it will copy though.
View 5 Replies
View Related
Sep 1, 2011
i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
View 5 Replies
View Related
Jun 27, 2011
I need to do a backup on our laptop prior to beginning the malware removal process. I need to move 22GB+. There is plenty of room on our desktop to store the files.Would it be best to use file sharing between the 2 PCs? They are both USB connected to the same router. Or, is it possible to transfer the files by connecting them directly to each other via USB?
View 5 Replies
View Related
May 14, 2013
I record videos after motion detection on the cameras sd-card. Is there a way to copy all the files from sd-card to the pc? I wasn't able to copy them with the web-interface. I don't just want to delete the videos from time to time. I also want to archive them local.
View 3 Replies
View Related
Oct 29, 2012
I made an ASDM upgrade for one of my two CISCO ASA 5520. If I copy a file to the primary ASA's flash, is there any command I can run on the primary ASA to copy a file to the secondary ASA?
View 1 Replies
View Related
Nov 9, 2011
Is it possible to use the USB ports on a ASA5510's to copy files onto the flash?
I have not been able to find any ionfo on this in the users guides ?
View 2 Replies
View Related
Jul 9, 2012
I am trying to research the possiblity of backing up IOS and configurations from an Etherswitch module, and being able to store the files onto the Host Router's flash (3925 ISR). and then being able to recover that IOS and configuration, in case I have to replace the Etherswitch Module.
View 4 Replies
View Related
Dec 4, 2011
#1 windows 7 computer has a wired connection and #2 windows 7 computer has a wireless connection. When at #2 and trying to save a file to #1, the save time may be about a minute. When doing the same thing from a computer #3 with windows xp, the save time is a few seconds. Tried safe mode with networking. Same thing. Tried disabling remote differential compression. No change. The three computers are in the same workgroup.
View 3 Replies
View Related
Aug 27, 2011
I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. The drive has enough free space. However, I cannot copy to this external drive large (e.g. 700 MB) files.
View 5 Replies
View Related
Apr 25, 2012
Every other day and sometimes everyday I have an issue where my network slows down in one area at around the same time of day 12:00pm. I am using Solarwinds and I don't see anything significant showing up.
View 2 Replies
View Related
Oct 10, 2011
I have a laCie hard drive which we use to store all our files. There are 2 of us in the office and we would both like to be able to access the storage at the same time. Currently our laCie can only be seen on our desktop's if only one computer is connected (using either firewall and/or USB connectors).
Lastly, we also back up our files using dropbox, however when you drag and drop the files into dropbox from the desktop, the copying of the files uses the hard drive (HD) memory thereby reducing available HD space. Any way to upload folders (not individual files) onto dropbox without using any HD space?
View 2 Replies
View Related
Mar 26, 2011
so my computer acts slow when its sending files. when im on aim &im sending a song, evrything is slower. my internet becomes really slow to the point where i cant use it. &everything just becomes slow. &my sending speed is really slow compared to others. it would take me 10 minutes to send one song compared to my friend which would only take 3 minutes. &the song file was about the same mb.
View 14 Replies
View Related
Feb 12, 2012
I'm accessing a NAS server remotely through VPN (Netgear FVG318). I can connect to the NAS server but it is very slow when opening and saving documents. When accessing the network drive I am connected to the Internet through wireless connection. When I connect to the Internet through Ethernet cable opening and saving documents is much quicker. Is there anyway I can make the remote access quicker when accessing it through a wireless connection?
View 1 Replies
View Related
Nov 11, 2012
My Web application is running in a weblogic server. It is a java based application. Every day from 10 am to 12:30 pm, it is really slow. During initial days, I believed that the user rate is high at that time and so it is slow. But it is slow during weekends alsoI tried force garbage collection and restarting the server but its of no use. I am using 100 threads. After 12:30 the idle thread count could be seen upto 80, but between 10 am to 12:30 pm, all threads are used and my queue length is increasing.
View 1 Replies
View Related
Dec 26, 2011
On my moms laptop, (month old Lenovo B570/i3-3230/4GB/W7), when transferring files to my Crucial Gizmo! 16GB USB Drive, it is pretty much impossible to surf the web. Loading websites take 30-60 seconds, it's ridiculous. Is this normal? Her router is Linksys WRT54G. Router is not connected via USB, in fact the Laptop is connected through ethernet cable (not currently using wireless).
View 5 Replies
View Related
Nov 12, 2012
my switches layer 3 intervlan routing performance is dropping.What would cause this performance drop? I am not pummeling the switch with massive transfers constantly like an enterprise envirnoment would do or a colo center.
[code]...
View 8 Replies
View Related
Feb 28, 2012
I have Dell machine with Win Xp3 loaded, on my local network (and other computers). I set NIC card "Link Speed & Duplex" to autosense & make direct connection to my modem and works ok.When I plug into the network router I get the 'Cable is unplugged' and no Internet connection.I can change the "Link Speed & Duplex" to 10Mbps/Full Duplex and get intermitten connection. Also when I copy a file from Mapped drive I get "Cannot copy xxx - The specified network name is no longer available".
1. the NIC software is recently updated PRO/100 Adapter NDIS 5.1 driver
2. Although Microsoft has suggested Symantec < ver 4 has had an endpoint problem, I have 10.1.6.6000.
3. TCP/IP Properties are on automatic like the other computers.
View 3 Replies
View Related
Jan 10, 2013
I am facing a proble in wireless connection speed that is getting very slow at a specific time, i.e., from 12pm to 2pm and from 9 pm to 2 am. The service is unlimitted type contract
View 1 Replies
View Related
Jan 16, 2013
copy or move into local area network? If any software to check which PC or Workstation or Users or IP to do this.
View 2 Replies
View Related
Apr 18, 2011
I am having a problem with copying files onto my Storage device Connected to my WAG320N, the router is up to date with the latest updates and has been reset in an attempt to overcome this problem. I currently have attached a 2TB Seagate External Hard drive plugged directly into the router formatted in NTFS, and using Windows 7 Bit to access the Routers Webpage and the External Drive.
I am able to set up permissions and access control all okay, so some users can see some folders or have access in Read only or Read and Write Permissions, however I have been using the Admin account when accessing the drive which has Read and Write permissions to all Folders on the Drive. I can create a new document on the Drive (Right click > New > .Docx or .txt) and save file successfully and can view from other computers from the network, however I cannot Copy from any of the computers to the Network drive (e.g.. Copy .txt file from Computer to Network drive), I get the Windows Transfer Dialog and it Calculates Transfer Rate for a while before telling me it's unable to and that I can either select Try Again which comes up with the same error message, or Cancel the transfer.The reason why I want to be able to Copy files to the Network Drive is so I can centralise all the Photos, Videos and other files and documents to be shared to all computers on the network.
View 1 Replies
View Related
Sep 25, 2012
When I start-up my computer, it takes over an hour to find my router on my computer (Not on my brother's computer, or the computer upstairs). Once it does, it connect perfectly. This is very annoying because I do not have a lot of time anyway to work/play and when I do, it takes over an hour to find the router.Recently, I have been having HUGE lag spikes, constantly disconnecting from games and skype calls.
View 1 Replies
View Related
Nov 9, 2012
Each time I'm rebooting my E3200 device my ping to my ISP is 20ms. Few hours later the ping goes up to 300-500ms.Than I reboot again and the ping is going down to 20ms again.
View 5 Replies
View Related
Feb 9, 2012
Having issues with HTTPS sites being very slow after applying KB2585542? Once you remove this Microsoft patch everything returns to normal. It appears that the CSS does not handle the split-ssl requests properly. I have opened a TAC case but am not really getting anywhere as we seem to be the only company that is having this issue.
View 2 Replies
View Related
Mar 12, 2012
One of my laptops is having a connection problem. I have 3 other laptops that can connect perfectly with my router, and normally there's only 1 laptop that is connected to my router. The laptop with the slow connection (takes 5 HOURS to load a website, sometimes will not even load), i re-installed the OS, and installed all the drivers needed, and it still wont work. it shows strong connection to me, and im sure the password for the router is right. below is the ipconfig/all information. Having this problem for 2+ weeks now!!! I think this problem started when i restored my router to factory setting, my router is Netgear WGR614v6.
View 14 Replies
View Related
Aug 23, 2010
I have a WAG160Nv2 with Firmware Version:V2.00.20 Two problems
1. Slow wireless speed - only 2Mbit - with cabte up to the lines max 15Mbit
2. The routers system time is wrong - it says " 03-01-2000 02:19:54" I have set the correct system time but no difference
I have tried a lot of wireless options and some of the timezones but i did not solve the problem
View 8 Replies
View Related
Feb 15, 2012
I have a new ASA 5510 running 8.3(1) and ASDM 6.4(5)
I am trying to use the real time log viewer to troubleshoot some access issues, but I am getting delays of up to 30 seconds or more between my client connecting to the ASA and the corresponding events showing in the RT Log viewer. I am using a simple filter for source IP as it's quite a busy device.
I've seen an article that says to turn off certain logging IDs (such as 304001 from memory) which I have done, but no different.
View 6 Replies
View Related
Jun 8, 2012
I need a software that i can use to transfer files from one windows PC to another over the LAN network.I've tried "Quick'n Easy FTP server Lite" and it works, but its really slow (About 2MB/s) ( i know my hardware can go much faster than the software is allowing). But at least the speeds were constant and unchangingI have also tried Windows Easy Transfer. But that software makes it a bit harder to send back and for whenever i feel like it, and although sometime i would hit speeds 5 times faster than with the previously mentioned software (about 12MB/s) , those speeds were not constant. It would be slow (around 1MB/s) and then spike up, and then go back down, and repeat in that fashion
View 8 Replies
View Related
Jul 19, 2011
I am using TFTPD32 to upgrade the IOS on a router. When I type in the commands copy tftp flash and enter all the necessary information, the router sits for a minute or so and then times out. There is no entry made in the log when it times out. copy flash tftp yields the same result. The fa 0/0 interface and the TFTP server are both on the same subnet and can successfully ping one anothe
View 16 Replies
View Related
Apr 17, 2012
I have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies
View Related
Apr 4, 2012
I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies
View Related
