How To Increase Wifi Range With Xfinity Box/router
Dec 9, 2012
I just moved into my new house a week ago and I have some dead spots in my house. In my small old apartment I had a Linksys EA4500 that got most of the work done. Do you know if it is possible to connect that router (or another it you think it is better) to my xfinity box (router, cable, telephone thing) or should i buy something else to extend the range or rebroadcast the signal? like the Amped Wireless SR20000G? willing to spend around $200
I have a cisco WAG120N with me.wifi range is very less, means my devices won't catch the wifi even if they are 5 meters away from the router. Ways to increase the wifi range of this router. I dont want to use any repeater or any such stuff, just want to achieve a far more range with te existing device.
I have my router and modem in an upstairs office. I get terrific signal strenth and wifi connections throughout 80% of my home. I would like to shore up that remaining 20%.
I cannot realistically move my EA4500 to a "more central" locationBefore purchasing this router, I used a netgear + netgear extender. They worked horrifically together along with my wifi devices - they dropped signals every 4-5 minutes, even with bare-bones data usage. (I've had no connectivity issues, thus far, with the Linksys product)My home has two levels - no basement, no crazy concrete walls or anything. I figured on installing an extender OR another EA4500 downstairs to extend my signal. How two EA4500's work together, if anyone has a similar set up, compared to how (and what model) an extender may work to boost my signal distance in this situation. Primarily, in that "20%" deadzone, I need to use an iPad / iPhone - nothing that would consume tons of bandwidth.
I've been using the WRT310N and noticed that the range is quite poor--I've noticed this in two different houses.I've tried using an old repeater but it is a G repeater so it seems to actually make things worse i.e. a remote device will work slightly better with an unrepeated N signal than a repeated G (router is a in mixed mode).
I have a Cisco-Linksys WRT310N V2 Wireless-N Gigabit Router and was wondering if there is a setting (which I could not find in the admin control panel) to increase the range to catch internet connection. My house is large, and one portion has a bad connection to it because the router is sitting upstairs on the other end. If there is no setting, is there a external add on I can get to increase the internet range?
I'm using Comcast's xfinity gateway and i'm only getting speeds up to 5mbps on my wifi devices (iphone, ipad, apple tv, laptop) while on my desktop that is hardwired, i'm getting 50mbps.
We live in an area with no Internet available. We are currently using a Motorola Bionic cell phone thru Verizon as a personal hotspot for our Internet. We get fair to good 4G coverage but the wifi signal does not make it out of the room the phone is in. Is there a way to increase the range of the personal hotspot signal
I have a WAP54G and the signal strength and range is not that great; unit manufactured in 04/2007. I have firmware version 3.04 dated Oct 31, 2005. Customer support is suggesting I upgrade the firmware to 3.04.03 but I am sure it will really do anything to the signal strength and range. Also, they suggested I download new drivers for my desktop wireless card.
I have a WAP4410N access point. In the datasheet, it shows that the Antenna Gain in dBi as 2. I need to increase the range of the access point by replacing the antenna with a 7dB one. I would like to know the maximum dBi supported by this access point.
I switched to xfinity and I really don't feel like renting their gateway for $7 dollars a month. Gateways are crap anyways. So do any of you know of a good router and modem that can be paired up to work well with xfinity and has good speed?
I just recently purchased comcast internet today and self installation kit that came with the modem and all..... got it all set up no problems activated did speed test directly from cable modem to laptop computer wired and was getting 10mbps down and 3mbps up well went out and bought a linksys e900 wireless router.... connected it no problems... however my laptop wireless and phones connected to the router with speedtest is only getting 300kbps down average!!! but the upload is still 3mbps.
I want to share my pc's wifi connection with a neighbor across the street. But i have been un-able to confirm that it can reach the net. With the configs i have tried.I have cloned the mac addy for the wifiAP i have shared. This should be enough. And i should be able to walk it across the street and have it act as the same wifiAP. And he should have the net, via my pc. I tried to use another wifi device to connect to the shared IP...And the router itself...But there was no internet. have tried to configure this router to work as a repeater as well using it's setup. This resulted in no internet connectivity over lan, and no wifi service listing. These is no way for me to tell it which router or device it should be repeating from...
I have tried manually configureing the mn-700 To use the same ip the other router does for it's services. The mn-700 doesn't keep the settings. When it does there is no internet or wifi services.When i have it setup on it's own, no config changes...It'll connect over wifi to the router but there is no net. I can connect a lan wire going to the other router and renew it's lease. This will give the mn-700 an ip addy as if it were another pc. It uses this as it's WAN config
I have computers scattered across our home, and in many areas it is not feasible to run ethernet cable. At one location (less than 30 feet away) but through multiple walls, I can barely connect to any POS (I have two). I added a stand alone antenna extension with long antennas on both the router and the WiFi card on the PC, however, this made zero improvement.What should I be looking to purchase to increase the signal strength? I've already tried different routers.
Our wireless router is in a room at one end of the house (beside the telephone point) from which ethernet cables can connect to the Cat5 sockets taking the broadband to the other rooms that have a Cat5 socket. That is fine for connecting devices to the sockets in the other rooms but because the house is old with thick walls our wifi signal fades to nothing in some parts of the house. Moving the wireless router only moves the problem to another area. I thought about a wifi repeater but the room I would like to locate it in to then boost the signal to the rest of the house is borderline on the range for the wireless router. Is it possible to connect another wireless router or device to the main wireless router through the Cat5 cabling so that the second router/device can offer wifi to that area of the house?
Will a Wi-Fi range extender affect (i.e., reduce) the signal of the router? How does the throughput signal compare between where it originates and where it ends?
I have a wireless modem but its a sucky one. It was one of those free ones from verizon. Anyways, I don't get good signal in certain places in my house, so i am interested in knowing which would be better a wifi range extender or a good wireless modem.
Even though I put high gain antennas on my routers which extended the range of good signal immensely, I wish to try to get even better signal strength also. When using manual configuration mode on the router, I have set the WiFi power level to 100% (default level). Is there a way to increase that level beyond 100% and "overdrive" the signal? I tried to input a number >100% and that was not accepted.
I know this is possible if I go to dd-wrt, and possibly with open-wrt, which I prefer not to do for various reasons, not the least of which is that I have both a Rev. A1 and a Rev. B1 router (Rev. A1 is not supposed to support dd-wrt). I also know that increasing the power will make the router run hotter. I am willing to risk it as I monitor the temperature regularly.
Has anyone ever tried to do this or, have the people who want this just gone to dd-wrt? From the dd-wrt forum it appears that the DIR-825 router in Rev. B1 is not very user friendly to dd-wrt. After 3 years the code is still flaky. I would prefer not to use it, if possible.
I use a Linksys WRT54GR router. I recently bought an iPad, and I generally use it in a room that is on the other side of the house and through many walls. When it works, it works nice. But recently, my signal has been weak, and is often dropped. Pages load slowly, or not at all after getting a could not connect to server or whatever message. However, this isnt a huge problem for my laptops when used in this room. I dont believe it is the iPad that is faulty because my iTouch also experiences difficulty sometimes. I need a way to increase the signal strength for a longer distance. I looked at a repeater, but im not quite sure what it is and how to set one up, or where to buy one.
I have a new e2500 router and want to use my old WRT54G2 to expand the range of the wireless to reach my detached garage. My house is wired with category 5e cabling, but not the garage, which is why i want to wireless to get expanded. I was hoping the the new e2500 would reach, but it doesn't. How I can do that?
how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
I bought comcast xfinity internet about a month ago, and I cannot get any upload speed. It's jammed up at about .40, and I'm paying for 3-4 mbs. My plan is 15/3, but the download speed is always over 20 mbs, while the upload is .40.
Comcast has been here twice with two new modems, and ran brand new cable under the house, because they said the signal was weak. Now it's strong, the modem is fine, and there is STILL no upload. I can barely upload pics to photobucket. Comcast basically told me there is nothing wrong on their end, and there is nothing they can do. The signal is strong, the modem is fine, the cabling is fine, and they are providing their service on their end.
I assume this is a dumb question but I'd like to limit the bandwidth on this particular router. I have the option to do B, G, or mixed. Is there a major difference between the range of B and G?