How To Reinstall Barracuda 410 OS
Sep 30, 2012
We have a client whose Barracuda 410 has been out of warranty for at least 6 months, and had its hard drive die. They have a sister location with a 410 as well. Any way to clone the hard drive of the working 410 onto a new hard drive, then do a factory reset to set it up from scratch, or maybe import a config file if one was saved?Or, did they just get downgraded to a shitty $4000 1U server? I'm sure I could install something like untangle and get it to do some filtering without issue, or since it's actually an Athlon II X2 635e, which supports VT, I may just bump it to 8GB of RAM, throw in a pair of low profile drives (at least one, as I can fit that under the LAN/WAN ports), and turn it into an ESXi server to replace a few machines that are sitting around doing practically nothing (AV server, WSUS server, and whatever their door security system server is).
View 7 Replies
ADVERTISEMENT
Aug 22, 2012
I have been running a email/web/ftp server on one server for 9 years. I have currently acquired a Barracuda spam 300. I cant get the emails to go thru the barracuda first. Here is how it is setup: my email and web come in thru one outside address..call it 166.5.5.5 I have a 1 to 1 nat for 166.5.5.5 to 10.0.0.2 (email/web/ftp server) ports 25 and 53 are forwarded to the 10.0.0.4 (barracuda) then out on 25 to my 10.0.0.2 no emails go thru as long as it is set this way I can nat the 166.5.5.5 to the barracuda first and emails go thru, but I lose my web and ftp will this router work for me? I was told that i needed to change mx records for email to 166.5.5.6 and then forward nat on that address to the barracuda. I dont really want to change mx records for 10-12 email domains.
View 1 Replies
View Related
Sep 20, 2012
I have a site to site VPN setup between a 5510 and 5505. All traffic is sent ovet the VPN from the remote site to the home office. Everything is working fine but the remote site "www" traffic is not going to the Barracuda. ISP -> CISCO ASA -> Barracuda -> Internal Switch.The Barracuda is setup "inline" with the internal network.
View 7 Replies
View Related
Jun 15, 2011
I have the following scenario.
INET
(205.50.50.1)
|
|
(205.50.50.2)
[CISCO ASA 5540]
(10.10.10.1)
|
|
+ ---------------------------------------------+
(10.10.10.2) (10.10.10.3)
[BARRACUDA] [Exchange SRV]
Mail Domain: mail.domain.com (205.50.50.50)
Ok so the mail flows to the Barracuda using a static 1:1 NAT configuration and then gets delivered from the Barracuda to the Exchange server. I want to implement active sync (Direct Push) for Windows mobile devices. They need to communicate with mail.domain.com over port 443. The problem is I want mail to continue to flow to the Barracuda, but direct Direct Push traffic to the Exchange server.I cnow I can't implement two 1:1 NAT mappings from the same external hostname to 2 different servers.
View 3 Replies
View Related
Nov 29, 2011
Our ASA 5510 has been in place for nearly two years, we never have any issue what so ever with it. All along the ASA has been using the default policy. Lately, we beeen getting email deferred in our Barracuda Spam firewall. Google quickly reveals that ESMTP does not play nice with Barracuda witch i disabled eventhough we haven't had any issue with it before. However, the issue remains, we still getting email deferred in the barracuda.
While doing more troubleshooting on the ASA, I constated when issue the command show local-host + IP of the Barracuda, there is an IP address in outside of the interface that can get up to 96 UDP port 53 connections with the Barracuda, this connection never get lower than 20! However, when checking the default setup for the Barracuda, i have the values below:
Incoming SMTP Timeout: 20
Message per SMTP Session : 8
Maximum SMTP Error SMTP Session: 2
Maximum Connection per Client 30m:40
My question is if that ASA show up to 96 DNS session with an outside host to my barracuda, won't that push the barracuda to play email deferred timeout ? Should I change the barracuda default setting? Or should i change the connections limits for the Barracuda in the ASA?
View 3 Replies
View Related
May 8, 2013
trying to get my ducks in a row for replacing a Cisco 5510 and a Barracuda Link Balancer with a virtual pfSense appliance. This is partially due to eliminating support contract costs (nearly $3k annually between both appliance) and partially to utilize the redundancy and fault tolerance that our virtual environment can provide. I'm also implementing a colo site for replication/DR this year so doing a tunnel from site to site would make it a lot easier with like for like virtual appliance firewalls.
The VPN aspect. We are currently doing Cisco VPN with Radius auth on the back end, this is seamless to setup from an end user perspective as they just hit a URL, download/install the ANyConnect client, and log in with their credentials. Is there a comparable alternative in pfSense? I'm leaning toward IPsec but it still doesn't seem as seamless as what we currently have in the ASA.
View 8 Replies
View Related
May 12, 2013
configuration of a Catalyst 3750X and Barracuda Web Filter using WCCP protocol.
We used various WCCP protocol settings, unable set to redirect traffic to the Web Filter.
This is the current configuration of 3750X:
ip routing
ip wccp 94 redirect-list 194 group-list 50
ip wccp 95 redirect-list 195 group-list 50
[Code]......
View 5 Replies
View Related
Feb 20, 2011
I just reinstalled xp and now it sees the ethernet connection but I don't have an ip address.
View 1 Replies
View Related
Feb 8, 2011
Was running XP in Italian OS, and it has been reinstalled on my system when I wasn't there in English. Not a problem. however after the reinstall , my network card comes up as 1394 net adapter, and in the network settings this is the only connection available. I cannot connect to the Internet, I am pretty certain that the card identified is not the correct one, but, there is no other card visible, and no way of repairing it, or installing something else. Neither is winsoc corrupt. My internet connection is broadband always on..
View 1 Replies
View Related
Apr 11, 2011
i just had to reinstall xp sp1 and now can not get on the internet to update the sys really need to get this working soon have a client coming on the 13
View 6 Replies
View Related
Aug 14, 2012
I have a pretty new HP laptop Probook 4530s. It came with an absolute ton of bloatware and no matter how hard I try it seems to slow start up times and effect general performance. I thought I would download and reinstall an entirely clean version of Windows 7.I could not for the life of me get wifi to work afterwards. There are a load of drivers for wifi on the HP support website and I tried them all, not knowing which one was correct. No dice. The wifi card does not seem to show on device manager. It's like the system does not know the card is installed.There are some 'unknown device' errors on device manger so I assume that has something to do with it. The wifi card does show on bios, and after rolling back to the old bloatware system image, wifi is now back, so definately not a hardware problem.
View 3 Replies
View Related
Oct 1, 2011
I'm not working on a computer now. This is just a question of curiosity since I am still learning networking. I did a reinstall for someone. Once they brought their computer back home their Verizon DSL connection was not working. He could not Ping Google.com.
View 2 Replies
View Related
Nov 9, 2012
I lost password to reinstall. I have serial number.
View 2 Replies
View Related
May 15, 2011
I had to do a total recovery on my Toshiba laptop after getting a bad virus. Now I can't get my router to recognize itHow can I reinstall it? I've worked on this computer for several days trying to get rid of the virus (windows recovery) and it was so bad that's when I decided to just do a recovery on it, and I am worn out and would love to be able to just get this last thing fixed
View 10 Replies
View Related
Feb 5, 2012
After formatting and reinstalling my Windows 7 64-bit OS on my hard drive, it can't connect to the internet. It says the Network Adapter is not found, so I plugged in my old hard drive and went on the internet to download the proper driver install for my network adapter, but there's one problem.I don't have an extra sata cable to connect them both at the same time so I can transfer the driver software from one hard drive to the other, and since the internet isn't working on the one I need to install the driver on, uploading it to a website obviously isn't an option.
View 1 Replies
View Related
Jul 4, 2011
i have a Dell Latitude D810. I just wiped and reinstalled the OS. i have updated everything from windows update including chipnet,.Net, flashed the bios, and did a scan, and updated drivers. i have tried to update drivers from the original CD.problem: I cannot seem to get the computer to realize it has an internal network card. there is no switch on laptop. i have tried manually updating drivers, performing scans, etc. when i go to Dell website, it says to go to network connections, and click on the Wireless Connection to set it up, but that option is not there (only LAN). i am on internet through LAN but cannot see anything wireless to set up.when i am finally able to see wireless options, i want to connect to my existing network, so i do not need to set up a new network.
View 8 Replies
View Related
Aug 13, 2011
I just reinstalled my windows vista 32bit laptop and installed all network driversRight now I am trying to connect with my ethernet cable (LAN). I clicked on network connections, the LAN is enabled and the driver name is shown but there is no connectivity. Also, the IPv4 and IPv6 is not connected
View 1 Replies
View Related
Apr 3, 2011
I recently wiped my dell dimension 4550 clean due to the fact that it was given to me. I reinstalled win XP home and now have question marks beside Ethernet controller, Multimedia Audio controller, and PCI Input Device under the device manager. It shows that my Network adaptor is the 1394 Net Adapter. I have tried ipconfig and all it shows is Windows IP Configuration. no address or anyhting else. I am my ISP is Comcast with a cisco DPC3000 modem but they did not give me any drivers for this product. I have searched the dell website to find the drivers but am not really sure what i am looking for once i key in my service tag. I do have internet connection through my laptop which is a macbook and everything i load and transfer either doesn't have setup files or wont run properly on the dell unless i have internet acess.
View 19 Replies
View Related
Dec 27, 2011
Ive just formatted both my hard drives and reinstalled win 7. Before this, my wireless connection was working just fine and after everything was complete with the win 7 installation a wireless connection cannot be detected. However, plugging an ethernet cable in allows me to access the internet just fine. I can also use the internet wireless'ly via my laptop, so its not a problem with my actual internet connection.After reinstalling I put my Gigabyte motherboard CD into the computer which ran some auto installations, one of which being a driver 'Realtek 8111/8168 LAN driver for gigabit (Win 7).' This didnt make any difference and I still could not access wireless internet. The list of component parts I got when I ordered my computer lists a '802.11N 300mbps PCI Wireless Network Card,' but no further info on make or model.
View 12 Replies
View Related
May 28, 2012
I just reinstalled vista and put my disc with drivers in and may have chosen the wrong network adapter. Does windows automatically locate my adapter? My computer receipt lists "integrated 10/100 network card" and "intel 4965AGN wireless-N mini card".I can't access the Internet.When I ran the setup from the drivers disk, I chose intel 8255x-based PCI ethernet adapter (10/100). My other devices have issues too. There are 3 base system devices an Ethernet controller device and video controller that have the yellow exclamation points by them, as well as the network adapter.
View 14 Replies
View Related
Jul 2, 2011
I have a Dell Dimension desktop 4550. I did a reinstall of Windows XP sp2. Now I am having an issue with my wireless card. I am unable to install the driver. I don't have the original CD that came with the card. The wireless card is a Buffalo Air station wireless G. I went to the Buffalo site and downloaded the driver from the model number on the wireless card. I then attempted to install the driver using the Device Manager from a folder on my desktop. No such luck. I also tried to install the driver from the Device Manager using my memory stick. But that didn't work. I did uninstall the wireless card before attempting to install the driver. Now, My PC does recognize the wireless card and asks me to install the driver after every start-up.And yes the Device manager has the yellow exclamation point and exclamation marks under the Ethernet controller multimedia Audio controller and Network controller.
View 14 Replies
View Related
May 29, 2011
So I reformatted my hard drive today and reinstalled Windows XP Professional version. I have a desktop tower, but I use a Netgear wireless adapter to connect to the Internet. I went to reinstall the program from the CD so I could connect to the internet, when a prompt came up saying that I had to download and install some update to my OS to install the software. To do that, I needed to connect to the internet. So, I took the desktop to a hard point and tried connecting it to the house router through an ethernet cable. However, the ethernet connection is not working either. After reading some similar problems, I went to Device Manager, and noticed that the devices: "Multimedia Audio Controller", "PCI Modem", and "Video Controller (VGA Compatible)" all have yellow "!"s next to them.
View 4 Replies
View Related
Mar 30, 2012
Need to reinstall wireless adapter to go on line.
View 3 Replies
View Related
Nov 21, 2012
We've been using a 2Wire from our ISP to connect to the internet, and a Dlink DIR 655 for our wireless network. (Since the 655 has "N" speed, we can transfer large files between computers much faster than with the 2Wire.) The setup has worked fine for a few years, but recently both devices were slow. After turning them off and on a few times, unplugging, etc., without much effect, I reset both units. They're working now, but I've lost our network name and password; our Macs (and iPhone & iPad) are now using the default unlocked Dlink network. I tried to input the Dlink's default IP address, 192.168.0.1, but the address never connects. Any suggestions on how I can access our DIR 655's IP address, so I can reinstall a password and network name? If our tech guy (now unavailable) changed the Dlink's default IP address years ago, wouldn't it it have reverted to the 192.168.0.1 when I reset?
View 4 Replies
View Related
Jan 23, 2012
Complete reinstall of Dell 610 Latitude, Driver 'Dell Wireless (US) WLAN Network Adapter Card, Rev A04 seems to be the correct one. When the install starts, it never goes beyond 'Setup is searching for installed components.' On the Drivers page it shows that the hardware is installled.
Device Manager, Hardware shows yellow for Ethernet Controller, Network Controller, PCI Modem, PCI Simple Communications Controller, which indicates to me I don't have the drivers yet.
Can't stop it, except via the Windows Task Manager. When I do that I get a dialog box Titled 'Dell Wireless WLAN Installer, An error occurred while launching the setup. The remote procedure call failed.
View 3 Replies
View Related
Mar 26, 2013
Our subscriber is suffering from bug CSCti52867. The file system check repairs errors but we are still experiencing the read-only file system. We can ssh into sub but there is no prompt to enter commands. None of the services are started so there is no web interface. Firmware update cd updated firmware to 3.6 but problem still exists.We have successful backups from pub. How to reinstall/restore sub after hardware failure? This is the first time I've ever had to work with dr.
View 5 Replies
View Related
Jun 29, 2012
I recently purchased a used Dell 1525 Laptop and in an effort to make it more "Mine" I decided to contact Dell and purchase an original CD so I could wipe the HD out and reinstall Windows.
View 6 Replies
View Related
Dec 21, 2012
I reformat my old PC and installed Win XP SP3. There were no errors during installation and everything works ok. However, I'm not able to connect to the internet with my ethernet cable. The LAN connection shows 'Connected' but properties shows some packets sent but zero received. There are no antivirus program installed, windows firewall is turned off as well.
I've tried the following:
- Tried the same ethernet cable connection to another PC and I was able to get on the internet (so no ISP or router issues I assumed).
- Fix the stack using Winsock - didn't work.
- Device Manager now shows Network Adapter > Atheros L2 Fast Ethernet 10/100 Base-T Controller #2 (no yellow question mark). Although I had to reinstall the driver after XP installation.
- Here's the result of ipconfig/all:
Windows IP Configuration
Host Name . . . . . . . . . . . . : fiu-cf8cd9c6ded
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
[Code].....
View 4 Replies
View Related
Jun 6, 2011
how to reinstall wireless connection
View 1 Replies
View Related
Aug 31, 2012
during an electrical storm my computer deleted my network adapters. How can I get them back on my computer?
View 1 Replies
View Related
Mar 16, 2011
I had so much old garbage and damage from old viruses I needed to reformat the hard drive and reinstall windows xp from the System OS disk. Computer is up and running now, but I lost a lot of stuff, including my ability to connect to the internet and some drivers. I have cable internet. I downloaded Broadcom advanced control suite and the netxtreme 57xx drivers from the Broadcom site, and installed them with the provided download manager. Nothing seems to be working, the control suite says "No active broadcom network adapters detected in this system"....
note- I've been downloading to a different computer and burning the files to CD, and transferring them to the Dell that way...
View 14 Replies
View Related
Dec 30, 2012
I have a home network, hard wired 2 PC's & printer to a Linksys wireless 6 router. I use the wireless capability for WiFI to my two TV's. My son was able to get on the internet without using a password. When I map a network drive I must use ID and Password. I have a firewall. Is my home network vulnerable? My son see "Linksys" as a open wi-fi resource with his MAC, but since he is unable access my network printer
View 1 Replies
View Related
Jun 4, 2011
I have a Dell laptop, (Inspiron Mini).When i re install the software, the wireless network adopter disappeared, how can i re install it to receive the wireless network?
View 1 Replies
View Related
