D-Link DIR-655 :: Can Reinstall Password And Network Name
Nov 21, 2012
We've been using a 2Wire from our ISP to connect to the internet, and a Dlink DIR 655 for our wireless network. (Since the 655 has "N" speed, we can transfer large files between computers much faster than with the 2Wire.) The setup has worked fine for a few years, but recently both devices were slow. After turning them off and on a few times, unplugging, etc., without much effect, I reset both units. They're working now, but I've lost our network name and password; our Macs (and iPhone & iPad) are now using the default unlocked Dlink network. I tried to input the Dlink's default IP address, 192.168.0.1, but the address never connects. Any suggestions on how I can access our DIR 655's IP address, so I can reinstall a password and network name? If our tech guy (now unavailable) changed the Dlink's default IP address years ago, wouldn't it it have reverted to the 192.168.0.1 when I reset?
View 4 Replies
ADVERTISEMENT
Nov 9, 2012
I lost password to reinstall. I have serial number.
View 2 Replies
View Related
Jan 2, 2013
Due to problems with my wifi connection, I had to reset my router and modem. I have to reinstall my settings now, and therefore I need to write down a security number. That should be written on the back of my router (model WRT300N), a barcode with 8 numbers. I can't find that code. Where can I find it or is there another way to reinstall my connection and put a password on it? It's open access now.
View 2 Replies
View Related
Mar 3, 2012
I installed 930L with mydilnk few days ago.....setup up mydlink etc....then some how accidentally uninstalled my dlink...later wanted to reinstall and just couldn't.
View 4 Replies
View Related
Aug 28, 2011
After clearing my hard drive, I needed to reinstall EasyLink Advisor for my WRT54G wireless router. The first part of the reinstallation is successful, I get to the screen that says Welcome to EasyLink Advisor. I press the Setup button, then the computer searches for several minutes. After the system comes right back to the same starting screen, not completing the setup nor giving an error message from it.
View 2 Replies
View Related
Jul 4, 2011
i have a Dell Latitude D810. I just wiped and reinstalled the OS. i have updated everything from windows update including chipnet,.Net, flashed the bios, and did a scan, and updated drivers. i have tried to update drivers from the original CD.problem: I cannot seem to get the computer to realize it has an internal network card. there is no switch on laptop. i have tried manually updating drivers, performing scans, etc. when i go to Dell website, it says to go to network connections, and click on the Wireless Connection to set it up, but that option is not there (only LAN). i am on internet through LAN but cannot see anything wireless to set up.when i am finally able to see wireless options, i want to connect to my existing network, so i do not need to set up a new network.
View 8 Replies
View Related
Aug 31, 2012
during an electrical storm my computer deleted my network adapters. How can I get them back on my computer?
View 1 Replies
View Related
Dec 30, 2012
I have a home network, hard wired 2 PC's & printer to a Linksys wireless 6 router. I use the wireless capability for WiFI to my two TV's. My son was able to get on the internet without using a password. When I map a network drive I must use ID and Password. I have a firewall. Is my home network vulnerable? My son see "Linksys" as a open wi-fi resource with his MAC, but since he is unable access my network printer
View 1 Replies
View Related
Feb 26, 2012
I was also struggling with locale area net work.. When i have installed fresh window into my PC. The Locale area plugen showing but no internet conection found. I have restart my PC couple of times while sitting my different internet provider connections. Alteas i have reinstall my window xp so i guess may be its my window problem it have missing some files.
View 1 Replies
View Related
Feb 4, 2012
i upgraded my laptop from window 7 home to windows 7 unlitmate and the wireless network adapter has been removed is there a link i can download to re install it so that i can connect wireless again?
View 1 Replies
View Related
Dec 29, 2011
Had to reset out DIR-655 router. This ended up changing our network password. Unfortunately, my DAP-1522 was not informed of this change and it will not connect to my Directv receiver now. I attempted to log into the bridge to change the password and it will not let me in. I attempted to reset the DAP in hopes that I would just be able to start over from scratch, but no dice (Assuming that I did it correctly)
View 4 Replies
View Related
Feb 28, 2011
I will try to explain my problem as clear as possible but my knowledge about networks and routers is very limited.
I have a DIR-615 version:C1 firmware:3.13NA My ISP is ATT DSL Modem is Siemens SpeedStream 4100, it does not have a router built in Internet line is connected from wall to modem, to router, to PC.
after I upgraded the firmware I had no internet coming out of the router, I bypassed the router and connected straight to the PC and I got internet. I unplugged the power on both modem and router waited a whole night (I was too tired) and in the morning internet was back to PC and I had WIFI again BUT. When I put a password on the WIFI network all my stuff finds the signal but cannot connect, if I open the signal meaning if I have no password and the WIFI is open I can connect all of my electronics without any problems.
I already tried using WEP and WPA but still unable to connect anything, I been leaving my signal open when I'm at home for the last week and I don't like it.
Before the update everything worked fine.
I don't know if this matters but I have a PS3, Wii, Roku box, Laptop and a couple cell phones connected to it. And there are like 6 or 7 network signals close to my house.
View 1 Replies
View Related
Dec 13, 2012
I have DIR600 Rev. B1 for about 2 years, and it's been working without a problem.Suddenly yesterday, I could not connect to the internet from my 2 laptop & blackberry.SSID & signal reception looks normal. On checking into the router's web interface, I noticed that the network key was changed into something else.....normal character like y2tz39s.
I'm being very curious. Has it been hacked ? Is it possible?I'm using WAP/WAP2 Security Setting for wireless connection.All other settings seems intact (firewall & even the SSID). Only the password was mysteriously changed. If I consider it being hacked, I wonder why the hacker didn't mess up all other settings ?
View 1 Replies
View Related
Feb 28, 2011
I have a Gateway Notebook Model ML6720 that has built-in Wireless. The PC was heavily infected by Virus and I had to re-install Vista Operating system. Now, it will not detect the Wireless Adapter. I went to the maufacturer's website on another computer and downloaded the driver and installed the driver on the laptop. However, it did not work. The blue "wireless" light on the laptop is "lit", however when I go to "Device Manager" and look at the Network Drives, it only shows the wired Ethernet option.
View 6 Replies
View Related
May 18, 2013
i have to re-installed windows 7 on my Dell Inspiron 15r but now can't connect to the internet, the device manager shows the network controller in not installed at well as the PCI Simple Communications Controller.
View 1 Replies
View Related
Jul 23, 2011
I got a D-Link router not too long ago and I set it up in an odd way, the router password I gave it during the setup would not be accepted but the Network Security Key (the randomly generated alphaneumeric code) was accepted. I used it to connect all of my wifi devices.
The router password (which doesn't work), the "network name (SSID)", the network security type, and the network security key were all saved on my desktop. My computer has since suffered a critical crash and had to have it's hard drive erased. I still remember the password, the network name, and the security type. But the NSK (the thing I need to connect in place of a password) has been lost. It was this long random string of letters and numbers that I couldn't remember for the life of me.
I also remembered my Admin password, so I am able to log into http://192.168.0.1, but in here I only know how to change the regular password. I don't know how to access or change the NSK. change the security setting so that I can use the actual password instead of the NSK? Because of the crash I lost my iTunes libraries so I'm going to have to reset all my iOS devices, which are primarily what I use wifi on. If I reset them, they'll forget the wifi network and the assosiated NSK password, so I won't be able to use wifi at all.
View 1 Replies
View Related
May 16, 2010
Im having some problems changing my admin password on my DCS920
I know the default login is Login: admin / Password: "blank"
So I go into maintence, and there's an option to change the password.
it lists:
old password
newpassword
confirm
So I leave the old password blank and type in my new password in the following 2 spaces. I click apply and a window pops up asking me to enter username and password. I just enter admin and leave the password blank. I hit ok, and everything seems to update ok. So i log out, and try to log back in.
A window pops up asking me for my password. I type in admin for my username, and my new password, and it wont work
I type leaving the username blank, and type in new password... WONT WORK
I type admin, and new password again.. WONT WORK
I try password with first letter capital.. WONT WORK
I try password with ALL CAPS... WONT WORK..
Basically it wont let me log in as admin anymore. I figure I may have typed the password wrong the first time so I reset the camera and try the process again.. SAME PROBLEM.
Am I doing something wrong in changing my password ?
I dont wanna leave my default admin login as admin/"blank" , but when I try and change the password, it wont let me log in again as admin.
View 4 Replies
View Related
Feb 7, 2013
I did a custom reinstall on my dell latitude e5420 laptop using dell windows 7professional 64bit sp1dvd and now my wireless network is not working. I tried turning the switch on and off, restarted my laptop, and I also went to dell suport and downloaded all the recomended drivers and it still doesnt work.
I went to device manager and noticed that under "other devices" there is a yellow exclamation mark on the network controller.
View 1 Replies
View Related
Oct 30, 2011
I am making my wireless network with Wireless router DIR-600 and DWA-525 desktop adapters for my office. I created a most secured type of network WPA2. And I have to create profile for DWA-525 desktop adapter to connect to my network and it requires the network secret key to connect. But This secret key is viewable from the "Network connection manager" when one can click on modify network and click on "Show text in the password field" by everyone using this computer (I mean by all other office staff). I don't want to let any one know my wireless network secret key. Is there any way to protect the key while having the computers automatically connected to wireless network. More information is below
Model: DWA-525
Hardware Version: A1
Firmware Version: 1.10
Operating System: Windows 7
Service Pack: 1
View 1 Replies
View Related
Dec 1, 2012
I have been trying to connect a camera to the wifi router at my mother's assisted living facility. The password has a special character, "!".
After hours waiting on the phone with tech support, they confirmed that only letters and numbers are supported. Guess i have to take it back.
Incidentally, the software is changing "!" to "%21", which is the escape sequence used in URL's. The camera software isn't mapping it back. Should be fixable in firmware.
View 6 Replies
View Related
Nov 12, 2012
Region : Australia
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I just upgraded from my factory default and found network sharing of my USB HDD was no longer working.It came down to two bugs in the latest firmware:Even though there is now the option to share without a password that option does not work and you still need a password.And that password is the factory default of "admin" even though I have set my own password.
View 1 Replies
View Related
Feb 18, 2013
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1
ISP : Kabel Deutschland
the firmware offers 3 different dyndns services. But opendns is not included, also there is no free field to choose protocol, server, password and network. Will this be updated in further firmwares?
View 3 Replies
View Related
Feb 20, 2011
I just reinstalled xp and now it sees the ethernet connection but I don't have an ip address.
View 1 Replies
View Related
Feb 8, 2011
Was running XP in Italian OS, and it has been reinstalled on my system when I wasn't there in English. Not a problem. however after the reinstall , my network card comes up as 1394 net adapter, and in the network settings this is the only connection available. I cannot connect to the Internet, I am pretty certain that the card identified is not the correct one, but, there is no other card visible, and no way of repairing it, or installing something else. Neither is winsoc corrupt. My internet connection is broadband always on..
View 1 Replies
View Related
Sep 30, 2012
We have a client whose Barracuda 410 has been out of warranty for at least 6 months, and had its hard drive die. They have a sister location with a 410 as well. Any way to clone the hard drive of the working 410 onto a new hard drive, then do a factory reset to set it up from scratch, or maybe import a config file if one was saved?Or, did they just get downgraded to a shitty $4000 1U server? I'm sure I could install something like untangle and get it to do some filtering without issue, or since it's actually an Athlon II X2 635e, which supports VT, I may just bump it to 8GB of RAM, throw in a pair of low profile drives (at least one, as I can fit that under the LAN/WAN ports), and turn it into an ESXi server to replace a few machines that are sitting around doing practically nothing (AV server, WSUS server, and whatever their door security system server is).
View 7 Replies
View Related
Apr 11, 2011
i just had to reinstall xp sp1 and now can not get on the internet to update the sys really need to get this working soon have a client coming on the 13
View 6 Replies
View Related
Aug 14, 2012
I have a pretty new HP laptop Probook 4530s. It came with an absolute ton of bloatware and no matter how hard I try it seems to slow start up times and effect general performance. I thought I would download and reinstall an entirely clean version of Windows 7.I could not for the life of me get wifi to work afterwards. There are a load of drivers for wifi on the HP support website and I tried them all, not knowing which one was correct. No dice. The wifi card does not seem to show on device manager. It's like the system does not know the card is installed.There are some 'unknown device' errors on device manger so I assume that has something to do with it. The wifi card does show on bios, and after rolling back to the old bloatware system image, wifi is now back, so definately not a hardware problem.
View 3 Replies
View Related
Oct 1, 2011
I'm not working on a computer now. This is just a question of curiosity since I am still learning networking. I did a reinstall for someone. Once they brought their computer back home their Verizon DSL connection was not working. He could not Ping Google.com.
View 2 Replies
View Related
Feb 13, 2012
Ive been trying to set a password for my wireless router for a while now but every time i set a password the internet stops working
View 6 Replies
View Related
Mar 4, 2013
DIR-655. Never needed to setup a password before so others cannot use mine as a hotspot.Now I need to. How do I do this? Firmware is current.
View 5 Replies
View Related
May 15, 2011
I had to do a total recovery on my Toshiba laptop after getting a bad virus. Now I can't get my router to recognize itHow can I reinstall it? I've worked on this computer for several days trying to get rid of the virus (windows recovery) and it was so bad that's when I decided to just do a recovery on it, and I am worn out and would love to be able to just get this last thing fixed
View 10 Replies
View Related
Feb 5, 2012
After formatting and reinstalling my Windows 7 64-bit OS on my hard drive, it can't connect to the internet. It says the Network Adapter is not found, so I plugged in my old hard drive and went on the internet to download the proper driver install for my network adapter, but there's one problem.I don't have an extra sata cable to connect them both at the same time so I can transfer the driver software from one hard drive to the other, and since the internet isn't working on the one I need to install the driver on, uploading it to a website obviously isn't an option.
View 1 Replies
View Related
Aug 13, 2011
I just reinstalled my windows vista 32bit laptop and installed all network driversRight now I am trying to connect with my ethernet cable (LAN). I clicked on network connections, the LAN is enabled and the driver name is shown but there is no connectivity. Also, the IPv4 and IPv6 is not connected
View 1 Replies
View Related
