Keeps Repeating 2 Messages Then Timing Out?

Mar 30, 2011

it keeps repeating 2 messages then timing out

View 1 Replies


ADVERTISEMENT

Tp-link Repeating A Weak Wifi Signal

Dec 13, 2011

I bought TP-link wireless repeaters which i have failed trying to setup to an eircom zyxel dsl modem (ISP provided modem)i set it up as a universal repeater and had it auto latch on to the eircom modem but it just doesnt seem to boost the signal.i have turned all encryption and this doesnt work either. I have setup this situation using a netgear dsl modem and a netgear wireless router which if i remember i made a mac bridge, and it works great..am i wasting my time trying to get a TP-link talking to a cheap isp modem? i was reading an article somebody wrote that was doing the same thing yet the modem wasnt the same as mine, they said they got it working using WDS...and that the tp-link doesnt know about WDS and you need to use telnet to change settings on the tp-link looked a real hassle anyway.

View 3 Replies View Related

Cisco WAN :: MGX 8950 Reset To Avoid Repeating

May 25, 2012

Ive been trying to figure out what is wrong with this MGX8950 for a while now, it keeps repeating...(i attached a longer file)Also, Ive tried 4 different PXM-HD backcards and 3 different PXM 45/C. I even went as far as dismounting all of the linecards and using 2 different UI-S3 cards.This item was shipped to us via freight on a pallett and all we know is that it came out of service from somewhere that was using it.

View 8 Replies View Related

Cisco Wireless :: SA520W And AP541N Are Not Repeating Traffic?

Jul 15, 2010

Any AP that would be able to wrielessly repeat traffic to my SA520W (so that the AP has no ehternet wiring at all).  First off, there is no WDS option anywhere in the SA520W, so there is no method for which to simply create a WDS link between the two devices.  Yet the Factory Default Settings table in the SA520W Admin guide indicates there should be (search on WDS in the PDF to find this). both at the lack of integration of these Small Business Pro devices, and moreso at the fact that I was told that these two would be compatible for wireless-only repeating.  I've been messing around for hours trying to get something to happen.  Maybe I'm just missing something obvious as this is my first time trying to get an AP to talk wireless-only to a wireless capable internet gateway device (the SA520W).

View 4 Replies View Related

Cisco Wireless :: WAP4410N - Duplicate IPs When Repeating Signal

Mar 17, 2010

First here is our network breakdown
 
8 Windows 2008 Servers - UN effected
5 Windows 2003 Servers - effected with dupe IP's

We have AP - A, B and C all configured static and outside of our DHCP scope

A - 104.240
B - 104.241
C - 104.242
 
WAP A is setup to allow the Mac's of A and B to repeat its signal. The issue starts about 1-2 minutes after I set B and C to client/repeater and select A in site survey then save the settings.  Obviously its weird that only our 2003 servers are getting this error.  
 
The system detected an address conflict for IP address 192.168.105.201 with the system having network hardware address *MAC ADDRESS OF ROUTER A*. Network operations on this system may be disrupted as a result.

View 1 Replies View Related

Linksys Access Point :: WAP610N Wireless-N Repeating Signal

Sep 14, 2011

Is it possible to use  WAP610N Wireless-N Access Point repeating signal with another  WAP610N Wireless-N Access Point?what the range of signal when using a single WAP610N Wireless-N Access Point ?How many devices can connect to WAP610N in the same time?

View 1 Replies View Related

Cisco Wireless :: WAP4410 Acting As Repeating - Missing Modes

Jan 22, 2012

Currently I have an almost pure N environment, with the exception of 1 printer. My primary router is a WRVS400N v2, and the WAP 4410N is acting as a repeater.  On the WRVS400N I have the option og g/n Mixed (which is what I use), but this option is not available to me with the WAP4410N.It seems like the WAP4410N is taking an all or nothing approach, as each speed is idividually available, or ALL speeds are available.What I would like to know is if this oversight will be resolved in a fufute firmware release so I can have both devices configured equally?

View 1 Replies View Related

Linksys Wireless Router :: Cisco E1200 Wifi Repeating / Bridging

Jun 12, 2012

I just bought the Cisco E1200 about two weeks ago to replace an older Linksys non wireless router. With my old Linksys, I had an Acess Point installed, a trendnet TEW-638APB. Now that I have the new Cisco E1200 which itself is wireless, I'd like to add my TrendNet Access Point to the netowork and extend the wireless range. However the place in the house I want to put it does not have any CAT-5 cable running to it so I'm trying to set up a bridged connection between the two. I'm a bit new to netoworking stuff but I catch on pretty quick. I've been doing research on it all day between the TrendNet AP and the Cisco E1200 but I'm still a little lost. I've got WDS enabled on the TrendNet AP and have the first MAC address set to the Wireless MAC address of the E1200 but I don't get what to make the next three MAC address. Somone told me to make all 3 of them 00:00:00:00:00:00. Is that correct? 

I also have both the E1200 and the TrendNet AP set to the same channel, both are on a 20Mhz channel width, Both have the same SSID though I'm pretty sure that doesn't matter in the long run from what I've read. Also, no incryption on either (no need for it out here).So I guess I'm just wondering how do I use the E1200 as a Wireless Base Station? If that's what it's called? I have upgraded the firmware of the E1200 from 1.0.00 to 1.0.03 but that didn't change anything in regards to seeing an option for a bridging mode or anything. Other than that I'm not sure what else to do.

View 8 Replies View Related

Internet Keeps Timing Out Xp 2?

Jun 30, 2012

I'm running Mozilla firefox on xp 2. I hv wireless connection. My signal strength is very good. Under wireless network connection status my speed is 45 Mbps. Status is connected. Under activity it says is sending n receiving packets. My Internet used to disconnect n I'd restart it fixing it but now i'm having hard time getting it to connect. It keeps timing out. I hv to repeatedly click on links for them to work. Iv tried repair. Iv messed with dns n how grabbing ip address. Iv messed with Mozilla connection settings nothing seems to work.

View 4 Replies View Related

Some Websites Keep Timing Out

Sep 11, 2011

Since yesterday I just get the timeout message on a few websites. "The connection has timed out. The server at is taking too long to respond." It's not just my browser or my computer. The other two computers on the network can't access them either.

View 17 Replies View Related

Some Websites Timing Out?

May 20, 2012

Some websites, such as Amazon and Verizon's forum suddenly started timing out. This occurs on chrome, IE, and firefox. My xbox says it is connected to the modem but that it is not connected to the internet. My kindle fire cannot connect, but my android phone could load some websites, but now it can't load any. My mac, my laptop with windows XP, and my desktop with windows 7 are having the same problem. I did an upload/download test and the times were normal. I also restarted my modem, with no change. Other strange changes are that the wireless signal is weaker and it was slowing a few hours before it stopped showing some websites. Also, io9.com will load, but only the text of the nav bars. There are no graphics or other information. This has never happened before.

I have not done anything new manually to the modem or my computers. The only significant change was a power outage due to heavy wind that occurred a little over 24 hours earlier. I'm so confused by this that I don't even know what else to look-up or test. Why would a bunch of reliable websites suddenly time out while others still work? I don't think I can blame it on the servers of those web sites because the other sections of Verizon.com work, and student.santarosa.edu loads, but online.santarosa.edu does not load

View 1 Replies View Related

Cisco :: WCS 7.0 Keeps Timing Out?

Nov 26, 2012

I have a WCS and it's GUI keeps timing out on me, I have to login again and again if i do keep it idle. Anytime timeout for session into WCS?

View 2 Replies View Related

Web Pages Slow And Timing Out?

Nov 17, 2011

I am having a major issue, system wide with web pages timing out or loading slowly - we are using a Sonicwall as our content filter and firewall and to assign DHCP, we are a windows environment with both Server 2003 and 2008. Here are the results of a few tracert commands I ran.

C:Userscaleb>tracert Google

Tracing route to Google [72.14.204.103]
over a maximum of 30 hops:
1 3 ms 3 ms 3 ms 10.240.163.121
2 4 ms 3 ms 4 ms 67.59.235.245
3 * * * Request timed out.
4 6 ms 5 ms 6 ms 64.15.1.169

[code]...

View 2 Replies View Related

Web Browsers Not Connecting / Timing Out?

Jun 13, 2011

Recently, I've been getting problems where my internet browser is unable to connect to the server it's looking for or gets timed out. It happens intermittently (probably every five to seven web pages I try to visit), and refreshing after a few seconds always allows it to connect fine. It happens at some point on every web site I try to visit.This began occurring rather suddenly on both of my home computers. All other connections on these computers seem to be working fine. I use Chrome as the primary browser on both computers, but have tried using Firefox and it still seems to occur.What can I do to figure out what the problem is? I'm not even sure if it's a browser issue or a network issue, but we have never had this problem before

View 11 Replies View Related

Network Keeps Randomly Disconnecting / Timing Out?

Sep 6, 2011

When I click on certain links, the webpage doesn't load, and I can't access that page only until going to it later.

Sometimes it says "no data received" and sometimes it gives the usual page for no internet connection

View 3 Replies View Related

Wireless Router And Modem Timing Out

Nov 10, 2011

I've recently had to unplug my modem and wireless router every time I want to connect to the Internet. Charter suggested that the modem signal was weak, indicating the modem might be bad, so I replaced the modem. The problem persists and they think the modem and router connection is timing out.They want me to lease a modem/wireless router combination for $10 a month. I'd rather buy one.

View 1 Replies View Related

VPN On Linksys WRVS4400N Router Keeps Timing Out?

Mar 6, 2011

Every day or 2 my VPN times out. It still says "connected", but I cannot connect to anything thru the VPN. Once I disconnect and reconnect it works fine?how I can keep this connected at all times without having to go through this process every day or 2?

View 1 Replies View Related

D-Link DIR-655 :: TCP Sessions Timing Out / Getting Reset

May 30, 2012

I am having a recurring problem with tcp sessions timing out / getting reset.  I'm using the DIR-655 with PPPoE on a Qwest DSL line.  Everything appears to be working fine (including my ipv6 tunnel) except for this issue where my long running ssh & database connections are being reset after a period of time.Currently have 2.03NA loaded, tried using 2.07NA but couldn't get ipv6 working correctly with the newer version.

View 7 Replies View Related

Unable To Access Facebook - Ping Timing Out

Aug 2, 2011

It works on the mobile site at times maybe twice a day but only able to access for 10 minutes maximum. I tried the command prompt and ping facebookm and noticed that I didnt recieve files back and it was just timing out is that whats causing it?

View 3 Replies View Related

Netgear Adapter Will Not Join The Wireless Network And Keeps Timing Out

May 24, 2012

My Netgear adapter will not join the wireless network and keeps timing out.

View 3 Replies View Related

Cisco Switching/Routing :: SG 300-10 / All Pings Timing Out After 2 Responses?

Feb 14, 2012

I have recently installed a new Cisco SG 300-10 switch--running in layer 3 mode--to function as a basic router for a new subnet installed at one of my company sites. When we attempt to ping devices on the 15.120.204.0 subnet from the 230.20.1.0 subnet, each device gives 2 responses and then times out continuously after that. If we wait long enough (thus far, an undetermined period of time) and reattempt to ping the same devices, the same thing occurs. Otherwise, we get nothing but timeouts. This occurs regardless of where we connect in the 230.20.1.0 subnet including VLAN1 on the SG 300-10. However, if we connect into VLAN 2 on the switch and assign a static IP, those same devices respond continuously. I was thinking that this must be a security setting of some kind but I'm unable to locate anything in the SG 300-10 that would appear to cause this.

View 1 Replies View Related

Cisco Firewall :: ASA 5510 / Certain HTTPS Website Timing Out

Sep 12, 2011

Running ASA 5510 with code 8.3 in it.We have our few https portal and OWA websites in HO.We access these sites from the network behind the ASA.All works perfectly fine.
 
In order to have control on internal network traffic we placed a web-filtering device (Fortigate) in transparent mode.To start with of we haven't blocked anything via new box but https portal and OWA stopped working from certain computers.At the same time other https sites were reachable from the same computer/s.We checked that website was tracable using traceroute from ASA,Fortigate and even from interal computer(from the one which it is not opening).This behaviour is random.

View 3 Replies View Related

Wireless Connection To 8710 HP Workstation Via Mobile Hotspot Timing Out?

Jan 22, 2013

I have an HP 8710 Workstation laptop running WindowsXP that just recently starting having problems maintaining an internet connection with my ATT Elevate mobile hotspot. My internet connection will work for 1-2 minutes and then end up timing out. I then have to disconnect and then reconnect to the wireless network to get connectivity. I was using was my laptop's built-in wifi card (Intel Wireless WiFi Link 4965AGN) when this was occurring, then switched to a wifi adapter (Linksys AE1000) and still the problem persists. I contacted ATT and they checked the cell towers, nothing is wrong and everything seems to be working. I've tried upgrading all the drivers, still no success.

View 1 Replies View Related

Linksys Access Point :: E2500 Obtaining IP Address Timing Out While Connecting

Dec 5, 2011

I have a E2500 router and 3 WAP610N access points.  Users are having a difficult time connecting to the AP's.  The client device just sits there trying to obtain an IP and then times out.  If they get within range of the actual wireless router, then connect instantly.  Is there a setting to increase that will allow longer time trying to obtain an IP?
 
I am using the same SSID for roaming, but am using different channels (1, 6, 11) for the overlap.  See diagram below.  Not sure if this has some impact?

View 4 Replies View Related

Cisco Wireless :: 5508 - Apple Devices Timing Out From Guest Network With Captive Portal

Jan 29, 2013

I am setting up a new Guest network with a captive portal and it seems to all work fine except when Apple devices go to sleep. When they come back on it isn't just a case of logging in again as it just indicates to the client that it is still connected and won't present the login page again. The Controller will show the client as auth required. So far the quickest way has been for me to delete the network on iPads and re-enter my settings or create a new profile on a Macbook and join again. I have also had some success when doing a manual DHCP refresh on my Macbook which sometimes seems to kick the Controller into action so it presents the login page to the client again. Whether it is related to the timers on the Controller (5508 running code 7.0.235.3) or - as I just read in another post by Leo - the 20 minute timeout that all Apple devices have built in to conserve battery life

View 3 Replies View Related

Cisco VPN :: ASA 5505 - Site To Site Timing Out

Sep 14, 2011

I have a printer as the sole client on one end of a site-to-site VPN, and the tunnel times out. There is no ability to generate traffic from the printer
 
Printer end - ASA5505
Other end - Cisco VPN router.

View 1 Replies View Related

Servers :: Can't See Messages On Facebook?

Feb 7, 2013

what can i do if my computer is not letting me see my messages on facebook what

View 1 Replies View Related

D-Link DIR-655 :: What Does Syslog Messages Mean

Jul 26, 2012

I'm getting the Syslog messages frequently on daily basis.

View 4 Replies View Related

Cisco WAN :: POE Log Messages On 857 Router?

Oct 3, 2012

I have noticed poe log messages in my cisco 857 router, looking around there is mention of a cosmetic ios bug pertaining to 877 router but not the 857. BUG - CSCsd68389. Why i am getting these errors on my 857?
 
001586: Oct  5 11:25:06.499 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE
001587: Oct  5 11:25:06.499 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0
001601: Oct  5 13:06:29.879 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE
001602: Oct  5 13:06:29.879 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0
001603: Oct  5 13:06:31.387 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE
001604: Oct  5 13:06:31.387 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0

[code].....

View 3 Replies View Related

How To Retrieve Hotmail Messages Sent By Computer

Jun 9, 2011

How do I find deleted hotmail messages from a few years ago that I sent out off of my computer?

View 1 Replies View Related

Getting Error Messages With Limited Or No Connectivity

Jan 20, 2011

Our building used to have a very old server that basically just served as a place for teachers to store files and not much else. We have just changed ISPs and decided that we no longer needed the server at all. I disconnected the server from the network and replaced the old ISP's modem with the new ISP's modem. At first, everything seemed OK. My computer and several other teachers' connected to the Internet with no problem. However, some of the computers in the building could not connect. We get error messages with "limited or no connectivity." Part of me thought that perhaps the connections themselves are bad. However, when I take my laptop to classrooms with trouble connecting - mine connects easily using their cables. If I move their computers to my room, their laptops still won't connect. I have put my computer side-by-side with another one to make sure the settings were the same (auto-detect IP, DNS, etc.) and can't find differences. This problems is affecting our Windows 7, Vista, and XP computers the same.

View 11 Replies View Related

How To Stop Avast Virus Messages

Aug 17, 2011

I recently got multiple messages from Avast Virus giving me this message.Object: Infection URL:Mal, Process: CWINDOWSsystem32svhost.exe I have run Malewarebytes and a full boot scan with Avast and and I have not been able to get the message to stop showing up. how to stop this?

View 2 Replies View Related

Cisco :: Unable To See Log Messages Via Console

Feb 11, 2013

i have been facing this problem as i cannot see any log messages via my console port,except by looking at logs manually by "show log" command,

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved