Qwest Actiontec Gt701-wg - No Internet Access On Vista?
Aug 9, 2011
I am running Windows Vista service pack 2 using my laptop - Hp Pavilion dv5-1111ea and I have a qwest actiontec gt701-wg router. When I try to connect to the router it says connected to local only and when I diagonise the connection it says that Security policy seetings on this computer might be blocking the connection.
The following policy might need to be adjusted to allow windows to connect: Policy Provider:Windows Firewall Filter Name: Query User
View 12 Replies
ADVERTISEMENT
Oct 9, 2010
I had an old MS DSL1000 that was upgraded by Qwest to an Actiontec GT701 (not wireless) modem. If the GT701 is plugged directly into the PC, the internet works fine. If it is connected from the ethernet port into the WRT160N router, the LAN works but not the internet, even though the internet light is a solid green on the GT701. I've read about port forwarding and DMZ, but still not positive if I should do one or the other, much less on how to go about setting either of them up correctly.
View 9 Replies
View Related
Aug 30, 2011
How to set up DHCP correctly on my Actiontec GT701-WG router?
View 14 Replies
View Related
Dec 8, 2011
I would like to turn on the wireless capability on my Actiontec GT701-WG, but the firmware is old and the tutorial on CenturyLink's website looks nothing like the set-up page I get. I'm nervous about updating the firmware
View 4 Replies
View Related
Sep 11, 2011
We recently moved to a place with included internet that was going through a wireless network. All of my devices connect fine, no problem (iPhone xbox and USB adapter) but the lady friends laptop wont connect. It recognizes the network, connects to the network after the password has been entered but will not "give out" any internet. Signal Strength is very good (router is maybe 20 feet from us). All the drivers for the wireless adapter in her laptop are up to date and it will connect to other networks, like at her mom's. This is a newer router and funny enough we actually used this exact model at our last place and it had no problems with this. After calling our landlords ISP they said that there may be a problem with the compatibility of her laptop (its only 3 years old and connects to other networks fine) with the router, yet it connected to the same model not 6 months ago.
People we are at wits end and I am . As my username states If I cant find a fix for this I will enjoy smashing this thing to bits.
FYI: the router is an Actiontec V100H
View 8 Replies
View Related
Jan 3, 2012
I have a Cisco 678 connected to my ISP (Qwest) using DHCP. This is connected to a Linksys WRT54g router. I also have a home server running for remote access to some files and media streaming. I just installed security cameras that I wish to monitor remotely via the internet.I can access my home files over the internet with no issue. However I am unable to access my cameras using the internet. Looking at my router incoming log, I see my request arriving, but I never get to the DVR attached to the camereas for remote viewing.I enabled bridging on the Cisco 678 but this did not solve the issue.
View 1 Replies
View Related
May 13, 2011
i have the qwest q100 modem and my freind happened to havea qwest q1000 modem and when i just connected the q1000 the internet doesnt work. what do i do?
View 2 Replies
View Related
Feb 18, 2012
I am connected to my network wirelessly and I have Internet acces (according to the symbol at the bottom right) bu the Internet doesn't work. At the moment it keeps fluctuating between giving me interne and not I am using Skype to tell me if I have Internet ( when it's green I do when it's grey I don't) I have tried many things on forums like obtaining ip automatically or obtaining a fixed ip. I've tried renewing the ip and all this doesnt work.
View 4 Replies
View Related
May 28, 2012
I just reinstalled vista and put my disc with drivers in and may have chosen the wrong network adapter. Does windows automatically locate my adapter? My computer receipt lists "integrated 10/100 network card" and "intel 4965AGN wireless-N mini card".I can't access the Internet.When I ran the setup from the drivers disk, I chose intel 8255x-based PCI ethernet adapter (10/100). My other devices have issues too. There are 3 base system devices an Ethernet controller device and video controller that have the yellow exclamation points by them, as well as the network adapter.
View 14 Replies
View Related
Mar 21, 2011
I am having trouble getting internet access on my daughters laptop. she has os vista while my pc is windows xp. keep getting connection unsuccessful...this computer is connected to dlink but does not have access to the internet. showing currently connected to unidentified network(dlink) access:local only. took it to a shop where the man connected to his internet straight away? This is what it says when i,ipconfig/all
View 3 Replies
View Related
Feb 13, 2011
I am having internet connected to my Desktop with Win XP. Internet mode is Wireless Data Card that can be inserted into USB port.Now I have a laptop with Windows Vista Home Premium. I was able to connect both of them using ethernet cross over cable and successfully enabled file sharing through Local Area Network.But I want to access Internet from the laptop. Is it possible? when I typed ipconfig in cmd prompt in desktop, [code] And for Vista , I have IPv4 with ipadress as 192.168.0.2
View 3 Replies
View Related
Apr 23, 2011
My os is vista I have belkin Wireless router Iam trying to connect my laptop to wireless.it wont have any problem outside of home but at home i click on connect to a network and click on my wireless network and it says sucesfully connected but it is not connected to internet network and sharing center shows unidentified network?
View 1 Replies
View Related
Jul 24, 2011
My sis has a toshiba satellite laptop running vista and she cant go on the internet while mine and my dad's can.Her computer was able to go on the internet but then suddenly she cant. I've searched everywhere, i tried resetting the TCP/IP, setting a static IP address, even returned the laptop to factory settings, but no luck.The network page stays as: Computer----------unidentified network-------x------internet[CODE]
View 3 Replies
View Related
Jun 25, 2012
I just recently upgraded my computer to Vista from XP. Since then my computer connects to the internet and runs applications such as Star Trek Online and Skype ok but it won't load pages in any internet browsers.
View 12 Replies
View Related
Feb 7, 2012
I have a hp laptop, it's about two years old. I can connect to my wireless network, but i have no internet access. I also have a macbook, and it's accessing my wireless network perfectly fine.
My router does not have a password ( yes, i know, pretty dumb of me)
View 2 Replies
View Related
Jun 26, 2011
I bought an Actiontec GT724WGR. I downloaded the latest firmware and went to install it. When it finished, I got the confirmation box and it gave me the click okay to restart option. I clicked okay, and when the router power cycled, the Power light stayed amber. I can't manually reset the setting back to default with the reset button. I can't access the router settings.
View 1 Replies
View Related
Nov 30, 2012
My Laptop stopped having internet access. I am able to connect to my Linksys (says Limited Access) but then it states I do not have internet access. I read other forums and tried to do the "command prompt" but when I try to run as administrator it tells me "The specified service does not exist as an installed service". I am using Windows Vista and McAfee as my spyware.
[code]....
View 11 Replies
View Related
Dec 31, 2012
I am running on Windows Vista and out of no where I cannot connect to my network %70 of the time. When I can connect I have local access and a full bar signal but no Internet access. But when I have internet access every page takes forever to load (if it even loads). I tried reinstalling my drivers and even hanged some registry stuff. My wireless card 8.11g by Broadcom.
View 3 Replies
View Related
Feb 25, 2012
My wife can't access the internet on her laptop, The computer is a Dell Inspiron 1750 with Windows 32 bit vista. I have the Internet plugged into the wire on the side of the computer, I am not using the wireless at the home. The wire going to the computer works on another computer for the internet.
View 1 Replies
View Related
Apr 14, 2013
Installed new N600 router and every box in the house can access the internet - except for my Vista powered laptop. My network shows up as Unidentified network with 'locla only' access. Ben scouring message boards all day. Can't find a solution at Microsoft.
View 3 Replies
View Related
Jan 20, 2013
I connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
I have reset my fios router as well as ea6500 to factory defaults multiple times.
View 9 Replies
View Related
Jan 10, 2012
trying to set up my router from the qwest modem
View 1 Replies
View Related
Jul 13, 2012
I have a Cisco 1801 that I am trying to set up for my DSL connection. I have configured the router but when I try to access a web site I receive the Http 404 page cannot be displayed error. I have checked my DNS server on the router & I believe that I have configured it correctly? I am hoping that one of you more experienced individual can take a look & tell me where I might have gone wrong. I have included the current running-configuration for your viewing pleasure.
View 4 Replies
View Related
May 3, 2011
I have been working on this problem for the last few day and have know idea why its not working but my d link Dir-615 will not work with my qwest q100 modem.
View 1 Replies
View Related
Apr 17, 2008
Here is my current config build for a Cisco 2620 using a Wic-1ADSL to connect to a Qwest ADSL ISP:
interface FastEthernet0/0
ip address 172.16.0.1 255.255.0.0
ip nat inside
no ip mroute-cache
[code]...
For some reason, it won't connect at all. I've changed the callin requirement on the ppp authentication between "callin" to "callout" - even removed the line completely for a no-authentication scenario.The only responses that come back on a repetative nature when doing a debug are:
Vi2 PPP: Authorization NOT required
and
Vi2 PPP: No remote authorization for call-out
View 2 Replies
View Related
Mar 20, 2013
I am trying to setup a cisco 2600 router that will be used to connect to a Qwest internet T1. I will have a Cisco ASA firewall behind the router so that I can build a site to site VPN tunnel. Qwest requires PPP encapsulation. The Lan side network is 10.2.0.0/16. Qwest gave me their serial IP address and my serial ip address which was I used to configure the route. The ethernet interface was configured for the local Lan side subnet and i natted both the inside and outside interface of the router. I am not sure if this is correct. How do I configure the router so that I can use one of the available public IP Addresses as the outside interface of the ASA?
Here is the config of the router:
version 12.2no parser cacheno service single-slot-reload-enableservice timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname cedar!logging rate-limit console 10 except errorsenable secret 5 xxxxxxxxxxenable password xxxxxx!ip subnet-zeroip audit notify logip audit po max-events 100no ip dhcp-client network-discoverycall rsvp-syncinterface FastEthernet0/0description Lan Interfaceip address 10.2.1.1 255.255.255.0ip nat insideno ip route-cacheno ip mroute-cachespeed autofull-duplexno mop enabled!interface Serial0/0ip address 65.121.x.x 255.255.255.252ip nat outsideencapsulation pppfair-queueservice-module t1 clock source internalservice-module t1 timeslots 1-24!ip nat inside source list 1 interface Serial0/0 overloadip classlessip route 0.0.0.0 0.0.0.0 65.121.x.x (qwest serial IP address)ip http serverip http authentication local!access-list 1 permit 0.0.0.0 255.255.0.0
View 7 Replies
View Related
Feb 5, 2012
Dell dimension 2400 XP home. Connects fine to old linksys g router.With new qwest dsl modem/router get IRQL not less than or equal as soon as I click on connect .Blue screen stop and must reboot.Qwest router works fine with my lenovo lap top. Win 7.
View 3 Replies
View Related
Dec 31, 2012
i have an Iomega Prestige Desktop External Hard drive usb 2.0.I also have a quest-centurylink ZyXEL modem model #PK5000Z.I would like to connect the iomega to the modem. However, I don't see a usb port on the modem.
View 1 Replies
View Related
Jul 15, 2012
Two computers on the home network:Dell desktop running Vista (computer name PJ) is wired to a Belkin routerThinkPad laptop running Win7 (computer name ThinkPad) connected wirelessly to routerThe desktop (PJ) can see the laptop (ThinkPad) and access it's shares.On the laptop the desktop name (PJ) shows up under NETWORK but clicking on the computer name shows: "Windows cannot access \PJ"I have turned off Windows Firewall and AVG anti-virus on PJ but CANNOT ping PJ from ThinkPad[CODE]
View 18 Replies
View Related
Oct 7, 2011
Ok, my roomate is hogging the bandwidth on our shared router downloading junk. I'm not sure if he's using a torrent, but just in case he is here is my question:How do I turn off the ports for torrenting on my qwest pk5000 modem? Is there anything else I can do that would work as well?My friend reccommended I turn off every port after 9000 or something.
View 3 Replies
View Related
May 18, 2011
i can access wifi from vista but not from xp from my computer.xp don't even show "view available network option".
View 3 Replies
View Related
Apr 22, 2011
I'm trying to share files on our 2 computers (1 vista 1 XP). I can access the XP machine through Vista but not the Vista machine through XP. We have a common LAN modem, a TeleWell-something with 4 LAN ports in te back.I have put the netsetup.exe in a flash drive and run it on Vista,no results,gives me an error. I have succesfully transferred one file (and could do more) from XP to Vista but not other way around.
View 3 Replies
View Related
Mar 2, 2013
I cannot access my Linksys with Windows 7 but can with Vista.
View 1 Replies
View Related
